Quasilan CT 23 | Baxenden Chemicals Ltd. | Quasilan CT 23, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone. | |
Quasilan CT 29 | Baxenden Chemicals Ltd. | Quasilan CT 29, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone. | |
Quasilan RB 1150 | Baxenden Chemicals Ltd. | Quasilan RB 1150, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Alongside the appropriate crosslinkers, Quasilan polyols can be formulated as 2-K coating and sealant systems mainly for DIY and floori...veja mais Quasilan RB 1150, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Alongside the appropriate crosslinkers, Quasilan polyols can be formulated as 2-K coating and sealant systems mainly for DIY and flooring markets. veja menos | |
Quasilan RB 1943 | Baxenden Chemicals Ltd. | Quasilan RB 1943, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Quasilan RB 1943 has applications in DIY and flooring markets and 2-K sealants and coatings. | |
Quasilan RB 1999 | Baxenden Chemicals Ltd. | Quasilan RB 1999, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. This product is mainly used in 2-K sealants and coatings. | |
Surfadol® 331 Pigment Dispersing Agent | ACME | Surfadol 331 é específico para sistemas à base de água. Permite uma boa redução da tensão dinâmica superficial e melhora a molhabilidade de vários substratos e pigmentos. Este produto tem um HLB de valor 8-11. | |
Surfadol® 333 Pigment Dispersing Agent | ACME | Surfadol 333 é específico para sistemas à base de água. Permite uma boa redução da tensão dinâmica superficial e melhora a molhabilidade de vários substratos e pigmentos. Este produto é adequado para adição na etapa de moagem, é livre de silicone e solven...veja mais Surfadol 333 é específico para sistemas à base de água. Permite uma boa redução da tensão dinâmica superficial e melhora a molhabilidade de vários substratos e pigmentos. Este produto é adequado para adição na etapa de moagem, é livre de silicone e solvente. Surfadol 333 tem aplicações em sistemas à base de água de revestimentos interiores de embalagens metálicas. veja menos | |
Surfadol® 333W Pigment Dispersing Agent | ACME | Surfadol® 333W is a 100% active nonionic wetting and dispersing agent for water based pigments. It can improves wetting, dispersing performance and stability for a variety of pigments. HLB value is 11-20. Silicone free, APEO free, solvent-free. | |
Surfadol® 336 | ACME | Surfadol 336 é específico para sistemas à base de água. Permite uma boa redução da tensão dinâmica superficial e melhora a molhabilidade de vários substratos e pigmentos. Este produto é adequado para adição na etapa de moagem, é livre de silicone e solven...veja mais Surfadol 336 é específico para sistemas à base de água. Permite uma boa redução da tensão dinâmica superficial e melhora a molhabilidade de vários substratos e pigmentos. Este produto é adequado para adição na etapa de moagem, é livre de silicone e solvente. Surfadol 336 tem um HLB com valor de 13. Este produto tem aplicações em sistemas à base de água de revestimentos interiores de embalagens metálicas. veja menos | |
Surfadol® 338 | ACME | Surfadol 338 é específico para sistemas à base de água. Permite uma boa redução da tensão dinâmica superficial e melhora a molhabilidade de vários substratos e pigmentos. Surfadol 336 tem HLB com valor de 11-20. Este produto tem aplicações em sistemas à b...veja mais Surfadol 338 é específico para sistemas à base de água. Permite uma boa redução da tensão dinâmica superficial e melhora a molhabilidade de vários substratos e pigmentos. Surfadol 336 tem HLB com valor de 11-20. Este produto tem aplicações em sistemas à base de água de revestimentos interiores de embalagens metálicas. veja menos | |
Surfadol® 420 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol ethoxylate) | ACME | Surfadol 420 é um agente umectante etoxilado e um antiespumante moleculare (100% ativo, líquido, HLB 4). Oferece uma performance similare ao Surfadol 541 com caraterísticas de utilização melhoradas em tintas à base de água, tintas de impressão e adesivos....veja mais Surfadol 420 é um agente umectante etoxilado e um antiespumante moleculare (100% ativo, líquido, HLB 4). Oferece uma performance similare ao Surfadol 541 com caraterísticas de utilização melhoradas em tintas à base de água, tintas de impressão e adesivos. Tem aplicações em tintas de impressão flexo, roto-gravura, soluções de umectação de substrato, adesivos sensíveis à pressão e revestimentos interiores de embalagens metálicas. veja menos | |
Surfadol® 440 Surfactant | ACME | Surfadol 440 é um agente umectante etoxilado de baixa formação de espuma (100% ativo, líquido e HLB:8). Este produto oferece uma redução de tensão superficial dinâmica e equilibrada com melhoramento da dispersibilidade e facilidade de incorporação em tint...veja mais Surfadol 440 é um agente umectante etoxilado de baixa formação de espuma (100% ativo, líquido e HLB:8). Este produto oferece uma redução de tensão superficial dinâmica e equilibrada com melhoramento da dispersibilidade e facilidade de incorporação em tintas à base de água, tintas de impressão e adesivos. Surfadol 440 tem aplicações em tintas de impressão flexo, roto-gravura, soluções de umectação de substrato, adesivos sensíveis à pressão e revestimentos interiores de embalagens metálicas. veja menos | |
Surfadol® 465 Surfactant | ACME | Surfadol 465 é um agente umectante etoxilado de baixa formação de espuma (100% ativo, líquido e HLB:13). E’ um tensoativo diol acetileno que combina uma redução da tensão superficial e uma baixa formação de espuma e melhora a solubilidade a compatibilidad...veja mais Surfadol 465 é um agente umectante etoxilado de baixa formação de espuma (100% ativo, líquido e HLB:13). E’ um tensoativo diol acetileno que combina uma redução da tensão superficial e uma baixa formação de espuma e melhora a solubilidade a compatibilidade em tintas à base de água, tintas de impressão e adesivos. Surfadol 465 tem aplicações em tintas de impressão flexo, roto-gravura, soluções de umectação de substrato, adesivos sensíveis à pressão e revestimentos interiores de embalagens metálicas. veja menos | |
Surfadol® 485 Surfactant | ACME | Surfadol 485 é um tensoativo diol acetileno etoxilado, não-iônico. E’ desenhado especialmente para sistemas à base de água e permite uma boa redução da tensão superficial dinâmica. Este produto melhora as propriedades de molhabilidade de vários substratos...veja mais Surfadol 485 é um tensoativo diol acetileno etoxilado, não-iônico. E’ desenhado especialmente para sistemas à base de água e permite uma boa redução da tensão superficial dinâmica. Este produto melhora as propriedades de molhabilidade de vários substratos e pigmentos e é muito recomendado para a adição na etapa de moagem. Surfadol 485 é livre de silicone e solvente e é indicado para um uso em tintas de impressão flexo, roto-gravura, soluções de umectação de substrato, adesivos sensíveis à pressão e revestimentos interiores de embalagens metálicas. veja menos | |
Surfadol 485W Surfactant | ACME | Surfadol 485W Surfactant is a nonionic low-foam dynamic wetting agent. It is specifically for water-based systems and improves wetting of various substrates and pigments. | |
Surfadol® 518 | ACME | Surfadol 518 tem propriedades excelentes e duradouras de controle de espuma. Não tem problemas de incompatibilidade e não provoca efeitos adversos à performance da aplicação. | |
Surfadol® 520 | ACME | Surfadol 520 é um liquid claro e amarelo usado em tintas, adesivos, látex a imersão, síntese de corante e pigmento e produtos de limpeza. | |
Surfadol® 532 | ACME | Surfadol 532 quebra eficazmente as bolhas e micro-bolhas e tem propriedades excelentes e duradouras de controle de espuma. E’ livre de silicone, óleo e APEO e pode ser usado em sistemas água/álcool e sistemas de base solvente. Surfadol 532 é um liquido cl...veja mais Surfadol 532 quebra eficazmente as bolhas e micro-bolhas e tem propriedades excelentes e duradouras de controle de espuma. E’ livre de silicone, óleo e APEO e pode ser usado em sistemas água/álcool e sistemas de base solvente. Surfadol 532 é um liquido claro e amarelo usado em tintas, adesivos, látex a imersão, síntese de corante e pigmento e produtos de limpeza. veja menos | |
Surfadol® 532B | ACME | Surfadol® 532B is a 32% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fr...veja mais Surfadol® 532B is a 32% active liquid nonionic molecular defoamer (Butyl cellosolve solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. veja menos | |
Surfadol® 541 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol, TMDD) | ACME | Surfadol 541 Surfactant apresenta uma combinação única de benefícios superiores para as formulações de tintas a base de água incluindo a redução da tensão superficial, uma excelente molhabilidade de superfície de baixa energia superficial e controle de es...veja mais Surfadol 541 Surfactant apresenta uma combinação única de benefícios superiores para as formulações de tintas a base de água incluindo a redução da tensão superficial, uma excelente molhabilidade de superfície de baixa energia superficial e controle de espuma. Uma dosagem típica é 0.25%-2.0% wt baseado no peso total da formulação. Surfadol 541 Surfactant é um diol acetilênico não-iônico que tem uma parte central hidrofílica com 2 extremidades hidrofóbicas. Surfadol 541 é um sólido ceroso branco a temperatura ambiente mas é fornecido em vários solventes para conveniência e facilidade de uso. veja menos | |
Surfadol® 541A Surfactant | ACME | Surfadol 541 é um diol acetilênico não-iônico que tem uma parte central hidrofílica com 2 extremidades hidrofóbicas. Surfadol 541 é um sólido ceroso branco a temperatura ambiente mas é fornecido em vários solventes para conveniência e facilidade de uso. | |
Surfadol® 541BC Surfactant | ACME | Surfadol 541 BC apresenta uma combinação única de benefícios superiores para as formulações de tintas a base de água incluindo a redução da tensão superficial, uma excelente molhabilidade de superfície de baixa energia superficial e controle de espuma. Es...veja mais Surfadol 541 BC apresenta uma combinação única de benefícios superiores para as formulações de tintas a base de água incluindo a redução da tensão superficial, uma excelente molhabilidade de superfície de baixa energia superficial e controle de espuma. Este produto é 50% ativo e fornecido na forma de um líquido em 2-Butoxietanol. veja menos | |
Surfadol® 541DPM Surfactant | ACME | Surfadol 541DPM é um éter de monometilo de dipropilenoglicol, 50% ativo e fornecido na forma de líquido. E’ uma molécula de diol acetileno, não-iônica, que tem uma parte central hidrofílica com 2 extremidades hidrofobicas. Surfadol 541DPM é um sólido ce...veja mais Surfadol 541DPM é um éter de monometilo de dipropilenoglicol, 50% ativo e fornecido na forma de líquido. E’ uma molécula de diol acetileno, não-iônica, que tem uma parte central hidrofílica com 2 extremidades hidrofobicas. Surfadol 541DPM é um sólido ceroso branco a temperatura ambiente mas é fornecido em vários solventes para conveniência e facilidade de uso. veja menos | |
Surfadol® 541E Surfactant | ACME | Surfadol 541 E é um diol acetilênico não-iônico que tem uma parte central hidrofílica com 2 extremidades hidrofóbicas. Este produto é 50% ativo, líquido em Etileno Glicol. | |
Surfadol® 541H Surfactant | ACME | Surfadol 541H é um tensoativo diol acetileno que tem muitos benefícios como umectante e controle de espuma em sistemas à base de água. Este produto é 75% ativo e é fornecido na forma de líquido em etileno glicol. | |
Surfadol® 541PA Surfactant | ACME | Surfadol 541 PA é um tensoativo diol acetilênico que apresenta muitos benefícios, inclusivos molhabilidade e controle de espuma em sistemas a base de água. E’ 50% ativo, líquido em Álcool Isopropílico. | |
Surfadol® 541PG Surfactant | ACME | Surfadol 541 PG é um tensoativo diol acetilênico que apresenta muitos benefícios, inclusivos molhabilidade e controle de espuma em sistemas a base de água. E’ 50% ativo, líquido em Propileno Glicol. | |
Surfadol® 541S Surfactant | ACME | Surfadol 541S é um pó fluido de sílica amorfa com um odor de mentol. Surfadol 541S reduz a tensão superficial, controle de espuma e promove o nivelamento e mantem a viscosidade estável. E’usado em tintas que são nem a base de água, nem a base de solvente...veja mais Surfadol 541S é um pó fluido de sílica amorfa com um odor de mentol. Surfadol 541S reduz a tensão superficial, controle de espuma e promove o nivelamento e mantem a viscosidade estável. E’usado em tintas que são nem a base de água, nem a base de solvente e para outros sistemas. Este produto é livre de APEO e não tóxico. veja menos | |
Surfadol® 550 | ACME | Surfadol 550 é um surfactante de diol acetilênico. Ele rompe efetivamente bolhas e micro-bolhas e oferece excelente controle de espuma de longa duração, sem qualquer efeito adverso para o desempenho da aplicação. Ele pode ser usado em sistemas de água/álc...veja mais Surfadol 550 é um surfactante de diol acetilênico. Ele rompe efetivamente bolhas e micro-bolhas e oferece excelente controle de espuma de longa duração, sem qualquer efeito adverso para o desempenho da aplicação. Ele pode ser usado em sistemas de água/álcool, bem como sistemas à base de solventes. Este produto é recomendado para uso em revestimentos, adesivos, látex de imersão, síntese de corantes e pigmentos e produtos de limpeza. Surfadol 550 tem uma densidade de 0,925-0,935g/cm^3. veja menos | |
Surfadol® 550P | ACME | Surfadol® 550P is a 50% active liquid nonionic molecular defoamer (Propylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-fr...veja mais Surfadol® 550P is a 50% active liquid nonionic molecular defoamer (Propylene glycol solution). It is an acetylenic diol-based product that provides defoaming in aqueous systems. Benefits include: microfoam elimination, long-lasting foam control, defect-free foam control, and good dynamic wetting. This product is APE-free. veja menos | |
Trixene AS | Baxenden Chemicals Ltd. | Trixene AS is a mono-functional isocyanate derivative for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. | |
Trixene ASF | Baxenden Chemicals Ltd. | Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces o...veja mais Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. Trixene ASF is a faster-reacting and more efficient alternative based on p-toluenesulphonyl isocyanate (PTSI). veja menos | |
Trixene BI 200 | Baxenden Chemicals Ltd. | Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and ...veja mais Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. veja menos | |
Trixene BI 201 | Baxenden Chemicals Ltd. | Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, text...veja mais Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. veja menos | |
Trixene BI 220 | Baxenden Chemicals Ltd. | Trixene BI 220 is a nonionic aqua blocked isocyanate dispersion that is designed for water-based 1 and 2-K systems. This product can be used as an adhesion promoter and cross-linker for finishes and coatings on leather, paper, textiles, and more. | |
Trixene BI 7641 | Baxenden Chemicals Ltd. | Trixene BI 7641 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...veja mais Trixene BI 7641 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. veja menos | |
Trixene BI 7642 | Baxenden Chemicals Ltd. | Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are...veja mais Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. veja menos | |
Trixene BI 7674 | Baxenden Chemicals Ltd. | Trixene BI 7674 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured u...veja mais Trixene BI 7674 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
Trixene BI 7675 | Baxenden Chemicals Ltd. | Trixene BI 7675 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured u...veja mais Trixene BI 7675 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
Trixene BI 7770 | Baxenden Chemicals Ltd. | Trixene BI 7770 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
Trixene BI 7771 | Baxenden Chemicals Ltd. | Trixene BI 7771 is a blocked isocyanate prepolymer cross-linker with a viscosity. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
Trixene BI 7772 | Baxenden Chemicals Ltd. | Trixene BI 7772 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
Trixene BI 7774 | Baxenden Chemicals Ltd. | Trixene BI 7774 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
Trixene BI 7779 | Baxenden Chemicals Ltd. | Trixene BI 7779 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
Trixene BI 7950 | Baxenden Chemicals Ltd. | Trixene BI 7950 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...veja mais Trixene BI 7950 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
Trixene BI 7951 | Baxenden Chemicals Ltd. | Trixene BI 7951 is a C9 Aromatic/BA solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under...veja mais Trixene BI 7951 is a C9 Aromatic/BA solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
Trixene BI 7960 | Baxenden Chemicals Ltd. | Trixene BI 7960 is a PM/ethyl acetate solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured und...veja mais Trixene BI 7960 is a PM/ethyl acetate solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
Trixene BI 7961 | Baxenden Chemicals Ltd. | Trixene BI 7961 is a C9 aromatic solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fa...veja mais Trixene BI 7961 is a C9 aromatic solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
Trixene BI 7963 | Baxenden Chemicals Ltd. | Trixene BI 7963 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...veja mais Trixene BI 7963 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
Trixene BI 7982 | Baxenden Chemicals Ltd. | Trixene BI 7982 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...veja mais Trixene BI 7982 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
Trixene BI 7991 | Baxenden Chemicals Ltd. | Trixene BI 7991 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...veja mais Trixene BI 7991 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
Trixene BI 7992 | Baxenden Chemicals Ltd. | Trixene BI 7992 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...veja mais Trixene BI 7992 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. veja menos | |
Trixene SC 7702 | Baxenden Chemicals Ltd. | Trixene SC 7702 is an isocyanate-terminated prepolymer based on aromatic diisocyanates. It has recommended applications mainly in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stabili...veja mais Trixene SC 7702 is an isocyanate-terminated prepolymer based on aromatic diisocyanates. It has recommended applications mainly in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. veja menos | |
Trixene SC 7703 | Baxenden Chemicals Ltd. | Trixene SC 7703 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It's recommended applications are in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/...veja mais Trixene SC 7703 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It's recommended applications are in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. veja menos | |
Trixene SC 7707 | Baxenden Chemicals Ltd. | Trixene SC 7707 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It is mainly recommended for applications in coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance ...veja mais Trixene SC 7707 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It is mainly recommended for applications in coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. veja menos | |
Trixene SC 7721 | Baxenden Chemicals Ltd. | Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability...veja mais Trixene SC 7721 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. veja menos | |
Trixene SC 7722 | Baxenden Chemicals Ltd. | Trixene SC 7722 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability...veja mais Trixene SC 7722 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. veja menos | |
Trixene SC 7725 | Baxenden Chemicals Ltd. | Trixene SC 7725 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability...veja mais Trixene SC 7725 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. veja menos | |
Trixene SC 7902 | Baxenden Chemicals Ltd. | Trixene SC 7902 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements. | |
Trixene SC 7906 | Baxenden Chemicals Ltd. | Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulati...veja mais Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulations are used in high-build, void-free coatings. veja menos | |
Trixene SC 7907 | Baxenden Chemicals Ltd. | Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in ge...veja mais Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in general use. veja menos | |
Trixene SC 7930 | Baxenden Chemicals Ltd. | Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coat...veja mais Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coatings. veja menos | |
Trixene SC 7931 | Baxenden Chemicals Ltd. | Trixene SC 7931 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements. |