| ALQUIMEX 109 | Polimeros Sinteticos, S.A de C.V | The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, e...veja mais The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, enamels for repainting automobiles of high brightness, resistance to yellowing, and enamels for industrial finishes. veja menos | |
| ALQUIMEX CC-60X | Polimeros Sinteticos, S.A de C.V | The short oil alkyd of the coconut in xylene owns excellent finished durability and brightness to of baking, maintaining the permanent firmness in the color, hardness and brightness. For baking enamel, special plasticizers for nitrocellulose lacquers, lac...veja mais The short oil alkyd of the coconut in xylene owns excellent finished durability and brightness to of baking, maintaining the permanent firmness in the color, hardness and brightness. For baking enamel, special plasticizers for nitrocellulose lacquers, lacquers for furniture, and special enamels. veja menos | |
| ALQUIMEX LS-70GN | Polimeros Sinteticos, S.A de C.V | Alkyd resin without modifying of long oil, dilute in naphtha. For the architectonic enamel formulation of inner and outer drying to the domestic air, easy application with brush, and excellent durability in exteriors. | |
| ALQUIMEX S-50GN | Polimeros Sinteticos, S.A de C.V | Medium oil length Alkyd resin of soybean, diluted in naphtha. For domestic enamel formulation of drying of 4 hours max., provides excellent appearance and outer resistance wing. | |
| ALQUIMEX S-50T | Polimeros Sinteticos, S.A de C.V | Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requi...veja mais Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requirements with drying, adhesion, flexibility, abrasion, exudation and resistance to the gasoline, as well as the resistance outdoors. veja menos | |
| ALQUIMEX SC-60X | Polimeros Sinteticos, S.A de C.V | The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in...veja mais The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in solution and resins of urea, and melamine, to obtain finished from greater hardness by baked systems. veja menos | |
| ALQUIMEX SC-70X | Polimeros Sinteticos, S.A de C.V | Alkyd resin cut chain of soybean oil. Fast drying to the touch, and offers good gloss and leveling. Recommended for the formulation of fast drying enamels, industrial finishes and wood funds for two components. | |
| ALQUIMEX SE–50X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with styrene monomer, diluted in xylene. It owns excellent properties in the enamel elaboration of drying to the air, distributes excellent brightness, hardness, good retention of the color and resistance to the water. | |
| ALQUIMEX SVT-60X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with monomer of vinyl toluene, diluted in xylene. Enamel for application with brush and/or by aspersion, enamels for tools, and primary, industrial enamels for drying to the air and by low baking. | |
| AMBERYL 1098 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin, and corresponds to penta modified rosin. Recommended for the formulation of adhesives and can be used also in oil resin varnishes and paints. | |
| AMBERYL 800 | Polimeros Sinteticos, S.A de C.V | Used for its excellent hardness and gloss, is recommended primarily for the preparation of solvent-based inks. | |
| AMBERYL 830 | Polimeros Sinteticos, S.A de C.V | A partially esterified colophony resin and modified with fumaric acid. Recommended for the formulation of solvent-based inks for use in flexographic inks and rotogravure, also making it soluble in alkaline water for use in flexographic inks based formulas...veja mais A partially esterified colophony resin and modified with fumaric acid. Recommended for the formulation of solvent-based inks for use in flexographic inks and rotogravure, also making it soluble in alkaline water for use in flexographic inks based formulas for water. veja menos | |
| AMBERYL 840 | Polimeros Sinteticos, S.A de C.V | A partially esterified colophony resin and modified with fumaric acid. Recommended for the formulation of inks and lacquers. | |
| AMBERYL 875 | Polimeros Sinteticos, S.A de C.V | A partially esterified colophony resin and modified with fumaric acid. Mainly recommended for the formulation of flexographic inks in alcohol, acetate or mixture thereof in water or as an additive in nitrocellulose lacquers. | |
| AMBERYL 880 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin, and corresponds to a partially esterified fumaric adduct. Mainly recommended for the formulation of inks flexo alcohol, acetates or mixtures thereof or water and gravure inks. | |
| AMBERYL GR 740 | Polimeros Sinteticos, S.A de C.V | The ester of glycerin rosin (pitch). Mainly recommended for the formulation of adhesives, may be employed in coatings and compounds that require a medium-hard thermoplastic resin. | |
| AMBERYL GR-720 | Polimeros Sinteticos, S.A de C.V | Fabricated from a resin pitch esterified with polyalcohols. Is characterized by being thermoplastic and having lower acidity and higher melting point than the pitch which it is derived. The Gum Resin has particularly attractive properties for the preparat...veja mais Fabricated from a resin pitch esterified with polyalcohols. Is characterized by being thermoplastic and having lower acidity and higher melting point than the pitch which it is derived. The Gum Resin has particularly attractive properties for the preparation of chewing gum. Other applications can be found in the manufacture of paints, printing inks, wood finishes, rubber products, solvent-based adhesives and hot melt. veja menos | |
| AMBERYL GR-725 | Polimeros Sinteticos, S.A de C.V | A resin made pitch based rubber and esterified with polyalcohols. Presents particularly attractive properties for the preparation of chewing gum. Other applications can be found in the manufacture of paints, printing inks, wood finishes, rubber products...veja mais A resin made pitch based rubber and esterified with polyalcohols. Presents particularly attractive properties for the preparation of chewing gum. Other applications can be found in the manufacture of paints, printing inks, wood finishes, rubber products, solvent-based adhesives and hot melts. veja menos | |
| AMBERYL M-15 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with glycerol. Recommended for the formulation of coatings and sealants for wood cut nitrocellulose in acetone or where they are used primarily polar solvents (with minor a...veja mais Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with glycerol. Recommended for the formulation of coatings and sealants for wood cut nitrocellulose in acetone or where they are used primarily polar solvents (with minor amounts of toluene), as a film-forming resin in printing inks and as a component for some varnishes or alkyd paints. veja menos | |
| AMBERYL M-15B | Polimeros Sinteticos, S.A de C.V | Rosin-based manufactures (pitch) and corresponds to an adduct maleic esterified with glycerol. Specially formulated to have good compatibility with nitrocellulose dissolved in high proportion or concentration of acetone. Is mainly recommended for the form...veja mais Rosin-based manufactures (pitch) and corresponds to an adduct maleic esterified with glycerol. Specially formulated to have good compatibility with nitrocellulose dissolved in high proportion or concentration of acetone. Is mainly recommended for the formulation of coatings and sealants for wood cut nitrocellulose in acetone or where they are used primarily polar solvents (with minor amounts of toluene). veja menos | |
| AMBERYL M-38 | Polimeros Sinteticos, S.A de C.V | Corresponds to the modified rosin ester of phenol, which presents a clear amber color, high gloss, viscosity and solubility provides average mineral oils for use in varnishes for printing. For the features it presents, is recommended for inks, varnishes f...veja mais Corresponds to the modified rosin ester of phenol, which presents a clear amber color, high gloss, viscosity and solubility provides average mineral oils for use in varnishes for printing. For the features it presents, is recommended for inks, varnishes for printing and offset systems, as well as resin modifier QUICK - HEAT SET and SET. veja menos | |
| AMBERYL M6 | Polimeros Sinteticos, S.A de C.V | Corresponds to the pitch maleic esterified with glycerol, with the relevant characteristic brightness and that impart hardness to the lacquers and varnishes where they are included. Can be used as a modifier of nitrocellulose lacquers, enamels, printing i...veja mais Corresponds to the pitch maleic esterified with glycerol, with the relevant characteristic brightness and that impart hardness to the lacquers and varnishes where they are included. Can be used as a modifier of nitrocellulose lacquers, enamels, printing inks resinous cheer and "off-set", varnishes for printing, solvent based adhesives and hot melt, sealants, wood finishes and generally in those applications where thermoplastic resins are required for good stability and low color. veja menos | |
| AMBERYL M6-60T | Polimeros Sinteticos, S.A de C.V | Imparts gloss and hardness, lacquers and varnishes where it is used. Soluble in aromatic hydrocarbons, terpenes and ketones in partially in alcohols, aliphatic hydrocarbon resins compatible with and non-drying alkyd drying with gum ester, nitrocellulose, ...veja mais Imparts gloss and hardness, lacquers and varnishes where it is used. Soluble in aromatic hydrocarbons, terpenes and ketones in partially in alcohols, aliphatic hydrocarbon resins compatible with and non-drying alkyd drying with gum ester, nitrocellulose, cellulose acetate butyrate and limited heavy oils. veja menos | |
| AMBERYL MP-25 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with pentaerythritol. Soluble in aliphatic solvents, aromatic alcohols and ketones insoluble in water and. Compatible with alkyd resins, drying oils and other derivatives o...veja mais Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with pentaerythritol. Soluble in aliphatic solvents, aromatic alcohols and ketones insoluble in water and. Compatible with alkyd resins, drying oils and other derivatives of rosin. Is recommended primarily for the formulation of coatings for lithography and as an additive modifier of hardness and drying. veja menos | |
| BREDEX 100 | Polimeros Sinteticos, S.A de C.V | Obtained by the catalytic treatment of Brea, changing the arrangement of double bonds in their molecular structure of the resin acids. Provides optimal properties of emulsifier in the polymerization of styrene-butadiene synthetic rubber. | |
| BREFOR 80 | Polimeros Sinteticos, S.A de C.V | Obtained by catalytic treatment of Brea, changing the arrangement of double bonds in their molecular structure and saponifying rosin acids to form the potassium soap of these fluids. Provides optimal properties of emulsifier in the polymerization of styre...veja mais Obtained by catalytic treatment of Brea, changing the arrangement of double bonds in their molecular structure and saponifying rosin acids to form the potassium soap of these fluids. Provides optimal properties of emulsifier in the polymerization of styrene-butadiene synthetic rubber. veja menos | |
| RESINA FUMÁRICA RFAAS | Polimeros Sinteticos, S.A de C.V | A partially esterified colophony resin with various polyols and modified with fumaric acid. Recommended for the formulation of solvent-based inks for use in gravure and flexographic inks, it is also soluble in alkaline water making it usable in formulas f...veja mais A partially esterified colophony resin with various polyols and modified with fumaric acid. Recommended for the formulation of solvent-based inks for use in gravure and flexographic inks, it is also soluble in alkaline water making it usable in formulas for flexographic water based inks. veja menos | |
| Automated Discharge Systems | Charles Ross & Son Company | A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipm...veja mais A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipment, an extruder, or a two or three-roll mill. veja menos |  |
| Double Planetary Mixer | Charles Ross & Son Company | Ross pioneered the Double Planetary Mixer design more than 60 years ago. Design updates make this mixer suitable for use in applications up to 7,000,000 centipoise. A high speed design variation is also available. |  |
| High Shear Mixer | Charles Ross & Son Company | All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear...veja mais All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear particles and droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. veja menos |  |
| High Speed Disperser | Charles Ross & Son Company | Ross High Speed Dispersers are the industry standard for durability, faster dispersion and low maintenance costs. Standard models include: explosion-proof, inverter duty motors; heavy duty V-belt drives and bearings; safety switches; an air/oil hydraulic ...veja mais Ross High Speed Dispersers are the industry standard for durability, faster dispersion and low maintenance costs. Standard models include: explosion-proof, inverter duty motors; heavy duty V-belt drives and bearings; safety switches; an air/oil hydraulic lift system with hand/foot controls; and stainless steel wetted parts and shaft guard. Sizes range from 1/2 HP to 200 HP to handle batches from 1 to 2000 gallons. Custom designs are also available. veja menos |  |
| Multi-Shaft Mixer | Charles Ross & Son Company | We offer Dual and Triple Shaft designs to meet your specific process requirements. Our economical Dual Shaft design includes a conventional high speed disperser and a two wing anchor agitator. This configuration is ideal for straight forward dispersion an...veja mais We offer Dual and Triple Shaft designs to meet your specific process requirements. Our economical Dual Shaft design includes a conventional high speed disperser and a two wing anchor agitator. This configuration is ideal for straight forward dispersion and mixing applications. veja menos |  |
| Planetary Dispersers | Charles Ross & Son Company | The patented Planetary Disperser combines a planetary blade and a high speed dispersion blade. The planetary and the high speed disperser blades rotate on their own axes and also rotate continuously around the vessel. The planetary blade feeds materials ...veja mais The patented Planetary Disperser combines a planetary blade and a high speed dispersion blade. The planetary and the high speed disperser blades rotate on their own axes and also rotate continuously around the vessel. The planetary blade feeds materials directly into the high shear zone of the orbiting high speed disperser. This combination of unique mixing actions eliminate the need for multiple mixers i.e. 2 technologies in one machine. veja menos |  |
| Powder Induction | Charles Ross & Son Company | All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear...veja mais All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear particles and droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. veja menos |  |
| PreMax | Charles Ross & Son Company | This single-stage rotor/stator generator is specially contoured to generate both high shear and vigorous flow in a batch mixing environment. Designed especially for pigment dispersions, the Delta rotor/stator generator is used in the Ross PreMax* to produ...veja mais This single-stage rotor/stator generator is specially contoured to generate both high shear and vigorous flow in a batch mixing environment. Designed especially for pigment dispersions, the Delta rotor/stator generator is used in the Ross PreMax* to produce an intense combination of mechanical, hydraulic and cavitational shear, which results in aggressive deagglomeration. veja menos |  |
| Ribbon Blender | Charles Ross & Son Company | Ribbon Blenders are ideal for powder blending applications. The dual action ribbon agitator creates an intimate blend in a short cycle time. Ross stocks Ribbon Blenders in many sizes from 1 - 100 cu.ft. working capacity. |  |
| Sanitary Mixers | Charles Ross & Son Company | Ross serves the requirements of the Food, Cosmetic and Pharmaceutical industries, in virtually every industrialized country around the world. We have the experience and production capacity that no other manufacturer of specialty mixing and blending equipm...veja mais Ross serves the requirements of the Food, Cosmetic and Pharmaceutical industries, in virtually every industrialized country around the world. We have the experience and production capacity that no other manufacturer of specialty mixing and blending equipment can match. veja menos |  |
| Static/Motionless Mixers | Charles Ross & Son Company | Ross LPD/LLPD (low pressure drop) and ISG (interfacial surface generator) Motionless Mixers are well known for their wide ranging uses in turbulent and laminar flow mixing applications. |  |
| Systems And Controls | Charles Ross & Son Company | Ross Systems and Controls (SysCon) is a leading worldwide supplier of control systems. We offer packages that range from simple on/off switches to sophisticated PLC based recipe systems. Each system, standard or custom, is designed to meet your specific n...veja mais Ross Systems and Controls (SysCon) is a leading worldwide supplier of control systems. We offer packages that range from simple on/off switches to sophisticated PLC based recipe systems. Each system, standard or custom, is designed to meet your specific needs. veja menos |  |
| Three Roll Mill | Charles Ross & Son Company | When Ross produced the first Three Roll Mill more than 80 years ago, we revolutionized pigment dispersion — with superior consistency and finer dispersion than ever before. Today the original Ross Three Roll Mills are still the standard by which all other...veja mais When Ross produced the first Three Roll Mill more than 80 years ago, we revolutionized pigment dispersion — with superior consistency and finer dispersion than ever before. Today the original Ross Three Roll Mills are still the standard by which all others are measured — in applications as diverse as magnetic coatings, cosmetics, paints, inks and high performance ceramics. veja menos |  |
| Tumble Blenders | Charles Ross & Son Company | Ross Tumble Blenders are supplied with generous standard features, including double cone design in 316 stainless steel construction, manually operated Butterfly valve for discharge - 24” discharge clearance Hinged stainless steel charging opening, mirror ...veja mais Ross Tumble Blenders are supplied with generous standard features, including double cone design in 316 stainless steel construction, manually operated Butterfly valve for discharge - 24” discharge clearance Hinged stainless steel charging opening, mirror finish on interior surfaces, 150 grit finish on exterior surfaces, and the non-stainless steel components are finished with a durable two-component paint. veja menos |  |
| Vertical Blender | Charles Ross & Son Company | Ross Vertical Blenders provide an excellent design alternative for applications when your product is shear sensitive or your process parameters are critical Products that require low-impact blending are best handled in a Ross Vertical Blender. The blendin...veja mais Ross Vertical Blenders provide an excellent design alternative for applications when your product is shear sensitive or your process parameters are critical Products that require low-impact blending are best handled in a Ross Vertical Blender. The blending action of the slow-turning blending screw is far more gentle than the agitators in a Ribbon Blender of the same working volume. veja menos |  |
