| ALQUIMEX 109 | Polimeros Sinteticos, S.A de C.V | The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, e...veja mais The chain-stopped alkyd of Soybean oil, diluted in Xylene, possess excellent characteristics which include, fast drying, high brightness, durability to weathering, flexibility, hardness and adhesion to steel. For the formulations of fast drying enamels, enamels for repainting automobiles of high brightness, resistance to yellowing, and enamels for industrial finishes. veja menos | |
| ALQUIMEX CC-60X | Polimeros Sinteticos, S.A de C.V | The short oil alkyd of the coconut in xylene owns excellent finished durability and brightness to of baking, maintaining the permanent firmness in the color, hardness and brightness. For baking enamel, special plasticizers for nitrocellulose lacquers, lac...veja mais The short oil alkyd of the coconut in xylene owns excellent finished durability and brightness to of baking, maintaining the permanent firmness in the color, hardness and brightness. For baking enamel, special plasticizers for nitrocellulose lacquers, lacquers for furniture, and special enamels. veja menos | |
| ALQUIMEX LS-70GN | Polimeros Sinteticos, S.A de C.V | Alkyd resin without modifying of long oil, dilute in naphtha. For the architectonic enamel formulation of inner and outer drying to the domestic air, easy application with brush, and excellent durability in exteriors. | |
| ALQUIMEX S-50GN | Polimeros Sinteticos, S.A de C.V | Medium oil length Alkyd resin of soybean, diluted in naphtha. For domestic enamel formulation of drying of 4 hours max., provides excellent appearance and outer resistance wing. | |
| ALQUIMEX S-50T | Polimeros Sinteticos, S.A de C.V | Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requi...veja mais Medium oil Alkyd of soybean, diluted in toluene. Of fast drying and excellent compatibility with chlorinated rubber. For traffic painting formulation, to modify with chlorinated rubber, providing products of excellent quality, covering perfectly the requirements with drying, adhesion, flexibility, abrasion, exudation and resistance to the gasoline, as well as the resistance outdoors. veja menos | |
| ALQUIMEX SC-60X | Polimeros Sinteticos, S.A de C.V | The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in...veja mais The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in solution and resins of urea, and melamine, to obtain finished from greater hardness by baked systems. veja menos | |
| ALQUIMEX SC-70X | Polimeros Sinteticos, S.A de C.V | Alkyd resin cut chain of soybean oil. Fast drying to the touch, and offers good gloss and leveling. Recommended for the formulation of fast drying enamels, industrial finishes and wood funds for two components. | |
| ALQUIMEX SE–50X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with styrene monomer, diluted in xylene. It owns excellent properties in the enamel elaboration of drying to the air, distributes excellent brightness, hardness, good retention of the color and resistance to the water. | |
| ALQUIMEX SVT-60X | Polimeros Sinteticos, S.A de C.V | Alkyd resin modified with monomer of vinyl toluene, diluted in xylene. Enamel for application with brush and/or by aspersion, enamels for tools, and primary, industrial enamels for drying to the air and by low baking. | |
| AMBERYL 1098 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin, and corresponds to penta modified rosin. Recommended for the formulation of adhesives and can be used also in oil resin varnishes and paints. | |
| AMBERYL 800 | Polimeros Sinteticos, S.A de C.V | Used for its excellent hardness and gloss, is recommended primarily for the preparation of solvent-based inks. | |
| AMBERYL 830 | Polimeros Sinteticos, S.A de C.V | A partially esterified colophony resin and modified with fumaric acid. Recommended for the formulation of solvent-based inks for use in flexographic inks and rotogravure, also making it soluble in alkaline water for use in flexographic inks based formulas...veja mais A partially esterified colophony resin and modified with fumaric acid. Recommended for the formulation of solvent-based inks for use in flexographic inks and rotogravure, also making it soluble in alkaline water for use in flexographic inks based formulas for water. veja menos | |
| AMBERYL 840 | Polimeros Sinteticos, S.A de C.V | A partially esterified colophony resin and modified with fumaric acid. Recommended for the formulation of inks and lacquers. | |
| AMBERYL 875 | Polimeros Sinteticos, S.A de C.V | A partially esterified colophony resin and modified with fumaric acid. Mainly recommended for the formulation of flexographic inks in alcohol, acetate or mixture thereof in water or as an additive in nitrocellulose lacquers. | |
| AMBERYL 880 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin, and corresponds to a partially esterified fumaric adduct. Mainly recommended for the formulation of inks flexo alcohol, acetates or mixtures thereof or water and gravure inks. | |
| AMBERYL GR 740 | Polimeros Sinteticos, S.A de C.V | The ester of glycerin rosin (pitch). Mainly recommended for the formulation of adhesives, may be employed in coatings and compounds that require a medium-hard thermoplastic resin. | |
| AMBERYL GR-720 | Polimeros Sinteticos, S.A de C.V | Fabricated from a resin pitch esterified with polyalcohols. Is characterized by being thermoplastic and having lower acidity and higher melting point than the pitch which it is derived. The Gum Resin has particularly attractive properties for the preparat...veja mais Fabricated from a resin pitch esterified with polyalcohols. Is characterized by being thermoplastic and having lower acidity and higher melting point than the pitch which it is derived. The Gum Resin has particularly attractive properties for the preparation of chewing gum. Other applications can be found in the manufacture of paints, printing inks, wood finishes, rubber products, solvent-based adhesives and hot melt. veja menos | |
| AMBERYL GR-725 | Polimeros Sinteticos, S.A de C.V | A resin made pitch based rubber and esterified with polyalcohols. Presents particularly attractive properties for the preparation of chewing gum. Other applications can be found in the manufacture of paints, printing inks, wood finishes, rubber products...veja mais A resin made pitch based rubber and esterified with polyalcohols. Presents particularly attractive properties for the preparation of chewing gum. Other applications can be found in the manufacture of paints, printing inks, wood finishes, rubber products, solvent-based adhesives and hot melts. veja menos | |
| AMBERYL M-15 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with glycerol. Recommended for the formulation of coatings and sealants for wood cut nitrocellulose in acetone or where they are used primarily polar solvents (with minor a...veja mais Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with glycerol. Recommended for the formulation of coatings and sealants for wood cut nitrocellulose in acetone or where they are used primarily polar solvents (with minor amounts of toluene), as a film-forming resin in printing inks and as a component for some varnishes or alkyd paints. veja menos | |
| AMBERYL M-15B | Polimeros Sinteticos, S.A de C.V | Rosin-based manufactures (pitch) and corresponds to an adduct maleic esterified with glycerol. Specially formulated to have good compatibility with nitrocellulose dissolved in high proportion or concentration of acetone. Is mainly recommended for the form...veja mais Rosin-based manufactures (pitch) and corresponds to an adduct maleic esterified with glycerol. Specially formulated to have good compatibility with nitrocellulose dissolved in high proportion or concentration of acetone. Is mainly recommended for the formulation of coatings and sealants for wood cut nitrocellulose in acetone or where they are used primarily polar solvents (with minor amounts of toluene). veja menos | |
| AMBERYL M-38 | Polimeros Sinteticos, S.A de C.V | Corresponds to the modified rosin ester of phenol, which presents a clear amber color, high gloss, viscosity and solubility provides average mineral oils for use in varnishes for printing. For the features it presents, is recommended for inks, varnishes f...veja mais Corresponds to the modified rosin ester of phenol, which presents a clear amber color, high gloss, viscosity and solubility provides average mineral oils for use in varnishes for printing. For the features it presents, is recommended for inks, varnishes for printing and offset systems, as well as resin modifier QUICK - HEAT SET and SET. veja menos | |
| AMBERYL M6 | Polimeros Sinteticos, S.A de C.V | Corresponds to the pitch maleic esterified with glycerol, with the relevant characteristic brightness and that impart hardness to the lacquers and varnishes where they are included. Can be used as a modifier of nitrocellulose lacquers, enamels, printing i...veja mais Corresponds to the pitch maleic esterified with glycerol, with the relevant characteristic brightness and that impart hardness to the lacquers and varnishes where they are included. Can be used as a modifier of nitrocellulose lacquers, enamels, printing inks resinous cheer and "off-set", varnishes for printing, solvent based adhesives and hot melt, sealants, wood finishes and generally in those applications where thermoplastic resins are required for good stability and low color. veja menos | |
| AMBERYL M6-60T | Polimeros Sinteticos, S.A de C.V | Imparts gloss and hardness, lacquers and varnishes where it is used. Soluble in aromatic hydrocarbons, terpenes and ketones in partially in alcohols, aliphatic hydrocarbon resins compatible with and non-drying alkyd drying with gum ester, nitrocellulose, ...veja mais Imparts gloss and hardness, lacquers and varnishes where it is used. Soluble in aromatic hydrocarbons, terpenes and ketones in partially in alcohols, aliphatic hydrocarbon resins compatible with and non-drying alkyd drying with gum ester, nitrocellulose, cellulose acetate butyrate and limited heavy oils. veja menos | |
| AMBERYL MP-25 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with pentaerythritol. Soluble in aliphatic solvents, aromatic alcohols and ketones insoluble in water and. Compatible with alkyd resins, drying oils and other derivatives o...veja mais Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with pentaerythritol. Soluble in aliphatic solvents, aromatic alcohols and ketones insoluble in water and. Compatible with alkyd resins, drying oils and other derivatives of rosin. Is recommended primarily for the formulation of coatings for lithography and as an additive modifier of hardness and drying. veja menos | |
| BREDEX 100 | Polimeros Sinteticos, S.A de C.V | Obtained by the catalytic treatment of Brea, changing the arrangement of double bonds in their molecular structure of the resin acids. Provides optimal properties of emulsifier in the polymerization of styrene-butadiene synthetic rubber. | |
| BREFOR 80 | Polimeros Sinteticos, S.A de C.V | Obtained by catalytic treatment of Brea, changing the arrangement of double bonds in their molecular structure and saponifying rosin acids to form the potassium soap of these fluids. Provides optimal properties of emulsifier in the polymerization of styre...veja mais Obtained by catalytic treatment of Brea, changing the arrangement of double bonds in their molecular structure and saponifying rosin acids to form the potassium soap of these fluids. Provides optimal properties of emulsifier in the polymerization of styrene-butadiene synthetic rubber. veja menos | |
| GEOlube® 43 A 1000 | GEO Specialty Chemicals | GEOlube® 43 A 1000 is a water soluble lubricant base fluid suitable for a range of industrial lubricant applications and may be used as a direct replacement to GEOlube® 50 A 1000 in all such application areas. It offers excellent resistance to weight loss...veja mais GEOlube® 43 A 1000 is a water soluble lubricant base fluid suitable for a range of industrial lubricant applications and may be used as a direct replacement to GEOlube® 50 A 1000 in all such application areas. It offers excellent resistance to weight loss under oxidising conditioners, with minimal residue formation on oxidation, excellent resistance to loss of viscosity under oxidising conditions and high shear, very high viscosity index, good water solubility at temperatures below 48°C. veja menos | |
| GEOlube® 45 A 380 | GEO Specialty Chemicals | GEOlube® 45 A 380 is a water soluble, monol initiated ethylene oxide / propylene oxide co-polymer manufactured to provide a viscosity of 380 cSt @ 40°C. This product finds extensive application when manufacturing and formulating various water soluble lubr...veja mais GEOlube® 45 A 380 is a water soluble, monol initiated ethylene oxide / propylene oxide co-polymer manufactured to provide a viscosity of 380 cSt @ 40°C. This product finds extensive application when manufacturing and formulating various water soluble lubricants, such as gear and calender lubricants, compressor lubricants, and metal working formulations. veja menos | |
| GEOlube® 50 A 1000 | GEO Specialty Chemicals | GEOlube® 50 A 1000 is a water soluble, monol initiated oxide / propylene oxide co-polymer manufactured to provide a viscosity of 1000 cSt @ 40°C. This product finds extensive application when manufacturing and formulating various water soluble lubricants,...veja mais GEOlube® 50 A 1000 is a water soluble, monol initiated oxide / propylene oxide co-polymer manufactured to provide a viscosity of 1000 cSt @ 40°C. This product finds extensive application when manufacturing and formulating various water soluble lubricants, such as gear, bearing and calender lubricants; compressor lubricants, and metal working formulations. veja menos | |
| GEOlube® 50 A 140 | GEO Specialty Chemicals | GEOlube® 50 A 140 is a water soluble, monol initiated ethylene oxide / propylene oxide co-polymer manufactured to provide a viscosity of 133 cSt @ 40°C. This product finds extensive application when manufacturing and formulating various water soluble lubr...veja mais GEOlube® 50 A 140 is a water soluble, monol initiated ethylene oxide / propylene oxide co-polymer manufactured to provide a viscosity of 133 cSt @ 40°C. This product finds extensive application when manufacturing and formulating various water soluble lubricants, such as gear, bearing and calender lubricants; compressor lubricants, and metal working formulations. veja menos | |
| GEOlube® 50 A 20 | GEO Specialty Chemicals | GEOlube® 50 A 20 is a water soluble, monol initiated oxide / propylene oxide co-polymer manufactured to provide a viscosity of 19 cSt @ 40°C. This product finds extensive application when manufacturing and formulating various water soluble lubricants, suc...veja mais GEOlube® 50 A 20 is a water soluble, monol initiated oxide / propylene oxide co-polymer manufactured to provide a viscosity of 19 cSt @ 40°C. This product finds extensive application when manufacturing and formulating various water soluble lubricants, such as gear, bearing and calender lubricants; compressor lubricants, metal working formulations, and oilfield drilling and completion fluids. veja menos | |
| GEOlube® 50 A 225 | GEO Specialty Chemicals | GEOlube® 50 A 225 is a water soluble, monol initiated oxide / propylene oxide co-polymer manufactured to provide a viscosity of 217 cSt @ 40°C. This product finds extensive application when manufacturing and formulating various water soluble lubricants, s...veja mais GEOlube® 50 A 225 is a water soluble, monol initiated oxide / propylene oxide co-polymer manufactured to provide a viscosity of 217 cSt @ 40°C. This product finds extensive application when manufacturing and formulating various water soluble lubricants, such as gear, bearing and calender lubricants; compressor lubricants, and metal working formulations. veja menos | |
| GEOlube® 50 A 320 | GEO Specialty Chemicals | GEOlube® 50 A 320 is a water soluble, monol initiated ethylene oxide / propylene oxide co-polymer manufactured to provide a viscosity of 320 cSt @ 40°C. This product finds extensive application when manufacturing and formulating various water soluble lubr...veja mais GEOlube® 50 A 320 is a water soluble, monol initiated ethylene oxide / propylene oxide co-polymer manufactured to provide a viscosity of 320 cSt @ 40°C. This product finds extensive application when manufacturing and formulating various water soluble lubricants, such as gear and calender lubricants, compressor lubricants, and metal working formulations. veja menos | |
| GEOlube® 50 A 380 | GEO Specialty Chemicals | GEOlube® 50 A 380 is a water soluble, monol initiated oxide / propylene oxide co-polymer manufactured to provide a viscosity of 387 cSt @ 40°C. This product finds extensive application when manufacturing and formulating various water soluble lubricants, s...veja mais GEOlube® 50 A 380 is a water soluble, monol initiated oxide / propylene oxide co-polymer manufactured to provide a viscosity of 387 cSt @ 40°C. This product finds extensive application when manufacturing and formulating various water soluble lubricants, such as gear, bearing and calender lubricants; compressor lubricants, and metal working formulations. veja menos | |
| GEOlube® 50 A 50 | GEO Specialty Chemicals | GEOlube® 50 A 50 is a water soluble, monol initiated oxide / propylene oxide co-polymer manufactured to provide a viscosity of 52 cSt @ 40°C. This product finds extensive application when manufacturing and formulating various water soluble lubricants, suc...veja mais GEOlube® 50 A 50 is a water soluble, monol initiated oxide / propylene oxide co-polymer manufactured to provide a viscosity of 52 cSt @ 40°C. This product finds extensive application when manufacturing and formulating various water soluble lubricants, such as gear, bearing and calender lubricants; compressor lubricants, and metal working formulations. veja menos | |
| GEOlube® 60 W 1000 | GEO Specialty Chemicals | GEOlube® 60 W 1000 is a water soluble, monol initiated oxide / propylene oxide co-polymer manufactured to provide a viscosity of 1000 cSt @ 40°C. For the majority of application areas, the performance of the GEOlube® 60 W range is equivalent to that of th...veja mais GEOlube® 60 W 1000 is a water soluble, monol initiated oxide / propylene oxide co-polymer manufactured to provide a viscosity of 1000 cSt @ 40°C. For the majority of application areas, the performance of the GEOlube® 60 W range is equivalent to that of the established 50 A range. The GEOlube® 60 W range is fully compatible with the 50 A range and can be blended with intermediate viscosity products using label-free lower viscosity GEOlube® 50 A grades. In this way, complete ISO VG viscosity ranges can be manufactured. veja menos | |
| GEOlube® 60 W 320 | GEO Specialty Chemicals | GEOlube® 60 W 320 is a water soluble, monol initiated ethylene oxide / propylene oxide co-polymer manufactured to provide a viscosity of 320 cSt @ 40°C. For the majority of application areas, the performance of the GEOlube® 60 W range is equivalent to tha...veja mais GEOlube® 60 W 320 is a water soluble, monol initiated ethylene oxide / propylene oxide co-polymer manufactured to provide a viscosity of 320 cSt @ 40°C. For the majority of application areas, the performance of the GEOlube® 60 W range is equivalent to that of the established 50 A range. veja menos | |
| GEOlube® 75 W 18000 | GEO Specialty Chemicals | GEOlube® 75 W 18000 is a diol started random propylene oxide / ethylene oxide co-polymer manufactured to provide a viscosity of 18,000 cSt @ 40°C. The high viscosity and low volatility of this product make it very suitable neat for high temperature lubric...veja mais GEOlube® 75 W 18000 is a diol started random propylene oxide / ethylene oxide co-polymer manufactured to provide a viscosity of 18,000 cSt @ 40°C. The high viscosity and low volatility of this product make it very suitable neat for high temperature lubrication. It finds extensive application in polymer quenchants and water based hydraulic fluids, demonstrating excellent shear stability and providing good lubricity to the finished product. GEOlube® 75 W 18000 is water soluble at temperatures below 75°C and has two terminal hydroxyl groups. veja menos | |
| GEOlube® 75 W 2050 | GEO Specialty Chemicals | GEOlube® 75 W 2050 is a diol started, random propylene oxide / ethylene oxide co-polymer manufactured to provide a viscosity of 2025 cSt @ 40°C. The high viscosity and low volatility of this product make it very suitable neat for high temperature lubricat...veja mais GEOlube® 75 W 2050 is a diol started, random propylene oxide / ethylene oxide co-polymer manufactured to provide a viscosity of 2025 cSt @ 40°C. The high viscosity and low volatility of this product make it very suitable neat for high temperature lubrication. It finds extensive application in polymer quenchants and water based hydraulic fluids, demonstrating excellent shear stability and providing good lubricity to the finished fluid. GEOlube® 75 W 2050 is water soluble at temperatures below 75°C and has two terminal hydroxyl groups. veja menos | |
| GEOlube® 75 W 270 | GEO Specialty Chemicals | GEOlube® 75 W 270 is a diol started, water soluble, random propylene oxide / ethylene oxide co-polymer manufactured to provide a viscosity of 272 cSt @ 40°C. The high viscosity and low volatility of this product make it very suitable neat for high tempera...veja mais GEOlube® 75 W 270 is a diol started, water soluble, random propylene oxide / ethylene oxide co-polymer manufactured to provide a viscosity of 272 cSt @ 40°C. The high viscosity and low volatility of this product make it very suitable neat for high temperature lubrication. It finds extensive application in polymer quenchants and water based hydraulic fluids, demonstrating excellent shear stability and providing good lubricity to the finished fluid. GEOlube® 75 W 270 is water soluble at temperatures below 75°C and has two terminal hydroxyl groups. veja menos | |
| GEOlube® 75 W 55000 | GEO Specialty Chemicals | GEOlube® 75 W 55000 is a diol started, water soluble, random propylene oxide / ethylene oxide co-polymer manufactured to provide a viscosity of 55,000 cSt @ 40°C. The high viscosity and low volatility of this product make it very suitable neat for high te...veja mais GEOlube® 75 W 55000 is a diol started, water soluble, random propylene oxide / ethylene oxide co-polymer manufactured to provide a viscosity of 55,000 cSt @ 40°C. The high viscosity and low volatility of this product make it very suitable neat for high temperature lubrication. It finds extensive application in polymer quenchants and water based hydraulic fluids, demonstrating excellent shear stability and providing good lubricity to the finished product. GEOlube® 75 W 55000 is water soluble at temperatures below 75°C and has two terminal hydroxyl groups. veja menos | |
| GEOlube® AA 70 750H | GEO Specialty Chemicals | GEOlube® AA 70 750H is an allyl alcohol initiated ethylene oxide / propylene oxide co-polymer. It is a clear liquid with a viscosity of 75-105 mPa.s at 20°C. | |
| GEOlube® AA E 210H | GEO Specialty Chemicals | GEOlube® AA E 210H is a polyether based on allyl alcohol with ethylene oxide. It is a clear liquid with a viscosity of 11-17 mPa.s at 20°C. | |
| GEOlube® AA E 410H | GEO Specialty Chemicals | GEOlube® AA E 410H is a polyether based on allyl alcohol with ethylene oxide. It is a clear liquid with a hydroxyl number of 135-150 mgKOH/g. | |
| GEOlube® AA E 450H | GEO Specialty Chemicals | GEOlube® AA E 450H is a polyether based on allyl alcohol with ethylene oxide. It is a clear liquid with a hydroxyl number of 110-125 mgKOH/g. | |
| GEOlube® AIR 32 | GEO Specialty Chemicals | GEOlube® AIR 32 is a compressor lubricant specifically designed for use in rotary screw air compressors. It is a fully formulated, fully synthetic blend of polyalkylene glycol and polyol ester, and thus takes advantage of the excellent performance attribu...veja mais GEOlube® AIR 32 is a compressor lubricant specifically designed for use in rotary screw air compressors. It is a fully formulated, fully synthetic blend of polyalkylene glycol and polyol ester, and thus takes advantage of the excellent performance attributes of both classes of compound. In addition, due to the inherently high viscosity index of this lubricants, no additional VI improvers are required in the formulation and so the products remain stable to shear forces and do not suffer any irreversible effects. veja menos | |
| GEOlube® AIR 46 | GEO Specialty Chemicals | GEOlube® AIR 46 is a compressor lubricant specifically designed for use in rotary screw air compressors. It is a fully formulated, fully synthetic blend of polyalkylene glycol and polyol ester, and thus takes advantage of the excellent performance attribu...veja mais GEOlube® AIR 46 is a compressor lubricant specifically designed for use in rotary screw air compressors. It is a fully formulated, fully synthetic blend of polyalkylene glycol and polyol ester, and thus takes advantage of the excellent performance attributes of both classes of compound. In addition, due to the inherently high viscosity index of this lubricants, no additional VI improvers are required in the formulation and so the products remain stable to shear forces and do not suffer any irreversible effects. veja menos | |
| GEOlube® B 100 | GEO Specialty Chemicals | GEOlube® B 100 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 100 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, suc...veja mais GEOlube® B 100 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 100 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. veja menos | |
| GEOlube® B 125 | GEO Specialty Chemicals | GEOlube® B 125 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 122 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, suc...veja mais GEOlube® B 125 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 122 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. veja menos | |
| GEOlube® B 150 | GEO Specialty Chemicals | GEOlube® B 150 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 150 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, suc...veja mais GEOlube® B 150 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 150 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. veja menos | |
| GEOlube® B 225 | GEO Specialty Chemicals | GEOlube® B 225 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 224 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, suc...veja mais GEOlube® B 225 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 224 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. veja menos | |
| GEOlube® B 335 | GEO Specialty Chemicals | GEOlube® B 335 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 330 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, suc...veja mais GEOlube® B 335 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 330 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. veja menos | |
| GEOlube® B 35 | GEO Specialty Chemicals | GEOlube® B 35 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 33 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such ...veja mais GEOlube® B 35 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 33 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. veja menos | |
| GEOlube® B 46 | GEO Specialty Chemicals | GEOlube® B 46 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 46 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such ...veja mais GEOlube® B 46 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 46 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. veja menos | |
| GEOlube® B 55 | GEO Specialty Chemicals | GEOlube® B 55 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 56 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such ...veja mais GEOlube® B 55 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 56 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. veja menos | |
| GEOlube® B 68 | GEO Specialty Chemicals | GEOlube® B 68 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 68 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such ...veja mais GEOlube® B 68 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 68 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. veja menos | |
| GEOlube® B 75 | GEO Specialty Chemicals | GEOlube® B 75 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 76 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such ...veja mais GEOlube® B 75 is a monol initiated propylene oxide homo-polymer manufactured to provide a viscosity of 76 cSt @ 40°C. The GEOlube® B-Series of products find extensive application when manufacturing and formulating various water insoluble lubricants, such as gear and calender lubricants, compressor lubricants, metal working formulations, and textile lubricants. veja menos | |
| GEOlube® BCF 11 | GEO Specialty Chemicals | GEOlube® BCF 11 (Brake Coating Fluid) is a high quality synthetic product formulated from high molecular weight polyalkene glycols, anti-oxidant and anti-rust additives, for the prevention of corrosion to brake components. Brake system components will cor...veja mais GEOlube® BCF 11 (Brake Coating Fluid) is a high quality synthetic product formulated from high molecular weight polyalkene glycols, anti-oxidant and anti-rust additives, for the prevention of corrosion to brake components. Brake system components will corrode and deteriorate if stored in humid conditions; to prevent this occurrence, GEOlube® BCFs provide a protective film of excellent durability. In addition to excellent humid corrosion protection, brake coating fluids need to comply with some viscosity and rubber swelling requirements, when used as an assembly fluid or as a testing fluid. veja menos | |
| GEOlube® BCF 7 | GEO Specialty Chemicals | GEOlube® BCF 7 (Brake Coating Fluid) is a high quality synthetic product formulated from high molecular weight polyalkene glycols, anti-oxidant and anti-rust additives, for the prevention of corrosion to brake components. Brake system components will corr...veja mais GEOlube® BCF 7 (Brake Coating Fluid) is a high quality synthetic product formulated from high molecular weight polyalkene glycols, anti-oxidant and anti-rust additives, for the prevention of corrosion to brake components. Brake system components will corrode and deteriorate if stored in humid conditions; to prevent this occurrence, GEOlube® BCFs provide a protective film of excellent durability. In addition to excellent humid corrosion protection, brake coating fluids need to comply with some viscosity and rubber swelling requirements, when used as an assembly fluid or as a testing fluid. veja menos | |
| GEOlube® CL 1400 | GEO Specialty Chemicals | GEOlube® CL 1400 is a polyalkylene glycol (PAG) lubricant, and is a well recognised standard in the industry. PAGs offer advantages over other types of lubricants, including minimal viscosity reduction, less likelihood that the lubricant is removed or was...veja mais GEOlube® CL 1400 is a polyalkylene glycol (PAG) lubricant, and is a well recognised standard in the industry. PAGs offer advantages over other types of lubricants, including minimal viscosity reduction, less likelihood that the lubricant is removed or washed form the plunger running zone, superior load carrying and lubricant performance, and relatively flat pressure-viscosity characteristics. veja menos | |
| GEOlube® CL 1400 S | GEO Specialty Chemicals | GEOlube® CL 1400 S is a polyalkylene glycol (PAG) lubricant. PAGs offer advantages over other types of lubricants, including minimal viscosity reduction, less likelihood that the lubricant is removed or washed form the plunger running zone, superior load ...veja mais GEOlube® CL 1400 S is a polyalkylene glycol (PAG) lubricant. PAGs offer advantages over other types of lubricants, including minimal viscosity reduction, less likelihood that the lubricant is removed or washed form the plunger running zone, superior load carrying and lubricant performance, and relatively flat pressure-viscosity characteristics. GEOlube® CL 1400 S is recommended for co-polymers of ethylene and vinyl acetate (VAM) containing up to 15% vinyl acetate. veja menos | |
| GEOlube® FGL 1000 | GEO Specialty Chemicals | GEOlube® FGL 1000 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 1000 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-...veja mais GEOlube® FGL 1000 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 1000 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 Registration. Water soluble polyalkene glycol base stocks, known to provide outstanding micropitting and EP characteristics are used to manufacture these lubricants. With the addition of a high performance additive package, these products are able to offer excellent thermal stability, high wear reduction rates, high micropitting resistance and load carrying ability, as well as good corrosion protection. veja menos | |
| GEOlube® FGL 150 | GEO Specialty Chemicals | GEOlube® FGL 150 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 150cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 R...veja mais GEOlube® FGL 150 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 150cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 Registration. Water soluble polyalkene glycol base stocks, known to provide outstanding micropitting and EP characteristics are used to manufacture these lubricants. With the addition of a high performance additive package, these products are able to offer excellent thermal stability, high wear reduction rates, high micropitting resistance and load carrying ability, as well as good corrosion protection. veja menos | |
| GEOlube® FGL 220 | GEO Specialty Chemicals | GEOlube® FGL 220 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 227 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 ...veja mais GEOlube® FGL 220 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 227 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 Registration. Water soluble polyalkene glycol base stocks, known to provide outstanding micropitting and EP characteristics are used to manufacture these lubricants. With the addition of a high performance additive package, these products are able to offer excellent thermal stability, high wear reduction rates, high micropitting resistance and load carrying ability, as well as good corrosion protection. veja menos | |
| GEOlube® FGL 320 | GEO Specialty Chemicals | GEOlube® FGL 320 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 339 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 ...veja mais GEOlube® FGL 320 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 339 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 Registration. Water soluble polyalkene glycol base stocks, known to provide outstanding micropitting and EP characteristics are used to manufacture these lubricants. With the addition of a high performance additive package, these products are able to offer excellent thermal stability, high wear reduction rates, high micropitting resistance and load carrying ability, as well as good corrosion protection. veja menos | |
| GEOlube® FGL 460 | GEO Specialty Chemicals | GEOlube® FGL 460 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 477 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 ...veja mais GEOlube® FGL 460 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 477 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 Registration. Water soluble polyalkene glycol base stocks, known to provide outstanding micropitting and EP characteristics are used to manufacture these lubricants. With the addition of a high performance additive package, these products are able to offer excellent thermal stability, high wear reduction rates, high micropitting resistance and load carrying ability, as well as good corrosion protection. veja menos | |
| GEOlube® FGL 680 | GEO Specialty Chemicals | GEOlube® FGL 680 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 725 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 ...veja mais GEOlube® FGL 680 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 725 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 Registration. Water soluble polyalkene glycol base stocks, known to provide outstanding micropitting and EP characteristics are used to manufacture these lubricants. With the addition of a high performance additive package, these products are able to offer excellent thermal stability, high wear reduction rates, high micropitting resistance and load carrying ability, as well as good corrosion protection. veja menos | |
| GEOlube® HTF 14 | GEO Specialty Chemicals | GEOlube® Heat Transfer Fluid (HTF) 14 is a fluid based on a modified polyalkylene glycol to ensure optimum performance in heat transfer applications. Inside the system, GEOlube® HTF 14 acts as a solvent for its own decomposition products, thereby preventi...veja mais GEOlube® Heat Transfer Fluid (HTF) 14 is a fluid based on a modified polyalkylene glycol to ensure optimum performance in heat transfer applications. Inside the system, GEOlube® HTF 14 acts as a solvent for its own decomposition products, thereby preventing the deposition of sludge or gums. veja menos | |
| GEOlube® Hydrolube NF46 2180 | GEO Specialty Chemicals | GEOlube® Hydrolube NF46 2180 is a fire resistant, water glycol (HF-C) based hydraulic fluid. Its use as a replacement for mineral oil fluids is recommended whenever a major fire hazard exists associated with industrial hydraulic systems, for example in di...veja mais GEOlube® Hydrolube NF46 2180 is a fire resistant, water glycol (HF-C) based hydraulic fluid. Its use as a replacement for mineral oil fluids is recommended whenever a major fire hazard exists associated with industrial hydraulic systems, for example in die casting machines, hydraulic forging press and hammers, machines and drive systems in the mining industry and robot welding machines. With a typical water content of 36%, this product is particularly designed for use in the metallurgic industry, where its excellent lubricity characteristics are beneficial in the heaviest operations (for example in die or continuous casting). veja menos | |
| GEOlube® Hydrolube NF46 2181 | GEO Specialty Chemicals | GEOlube® Hydrolube NF46 2181 is a fire resistant, water glycol (HF-C) based hydraulic fluid. Its use as a replacement for mineral oil fluids is recommended whenever a major fire hazard exists associated with industrial hydraulic systems, for example in di...veja mais GEOlube® Hydrolube NF46 2181 is a fire resistant, water glycol (HF-C) based hydraulic fluid. Its use as a replacement for mineral oil fluids is recommended whenever a major fire hazard exists associated with industrial hydraulic systems, for example in die casting machines, hydraulic forging press and hammers, machines and drive systems in the mining industry and robot welding machines. With a typical water content of 43%, this product is particularly recommended for use in coal mining, where the higher water content provides an extra safety margin. veja menos | |
| GEOlube® IL 1007 | GEO Specialty Chemicals | GEOlube® IL 1007 is a water insoluble polyalkylene glycol lubricant base fluid suitable for gear, calender and marine applications. It has an ISO VG 680 viscosity. Compared to some conventional polyalkylene glycols, this product exhibits resistance to wei...veja mais GEOlube® IL 1007 is a water insoluble polyalkylene glycol lubricant base fluid suitable for gear, calender and marine applications. It has an ISO VG 680 viscosity. Compared to some conventional polyalkylene glycols, this product exhibits resistance to weight loss under oxidising conditioners, with minimal residue formation on oxidation, excellent resistance to loss of viscosity under oxidising conditions, minimal residue formation, and inhibition of the formation of a stable emulsion with water. veja menos | |
| GEOlube® IL 307 | GEO Specialty Chemicals | GEOlube® IL 307 is a water insoluble polyalkylene glycol lubricant base fluid suitable for gear, calender and marine applications. It has an ISO VG 220 viscosity and may be blended with GEOlube® IL 807 to create an ISO VG 320 fluid. Compared to some conve...veja mais GEOlube® IL 307 is a water insoluble polyalkylene glycol lubricant base fluid suitable for gear, calender and marine applications. It has an ISO VG 220 viscosity and may be blended with GEOlube® IL 807 to create an ISO VG 320 fluid. Compared to some conventional polyalkylene glycols, this product exhibits resistance to weight loss under oxidising conditioners, with minimal residue formation on oxidation, excellent resistance to loss of viscosity under oxidising conditions, minimal residue formation, and inhibition of the formation of a stable emulsion with water. veja menos | |
| GEOlube® IL 807 | GEO Specialty Chemicals | GEOlube® IL 807 is a water insoluble polyalkylene glycol lubricant base fluid suitable for gear, calender and marine applications. It has an ISO VG 460 viscosity and may be blended with GEOlube® IL 307 to create an ISO VG 320 fluid. Compared to some conve...veja mais GEOlube® IL 807 is a water insoluble polyalkylene glycol lubricant base fluid suitable for gear, calender and marine applications. It has an ISO VG 460 viscosity and may be blended with GEOlube® IL 307 to create an ISO VG 320 fluid. Compared to some conventional polyalkylene glycols, this product exhibits resistance to weight loss under oxidising conditioners, with minimal residue formation on oxidation, excellent resistance to loss of viscosity under oxidising conditions, minimal residue formation, and inhibition of the formation of a stable emulsion with water. veja menos | |
| GEOlube® IL150SW | GEO Specialty Chemicals | GEOlube® IL150SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibili...veja mais GEOlube® IL150SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibility characteristics (according to ASTM D1401). This product is manufactured to provide a viscosity of 150 cSt @ 40°C, and is typically used for the lubrication of calenders and piston compressors, as well as the lubrication of bevel, spiral bevel, helical, enclosed spur, and worm gear units. veja menos | |
| GEOlube® IL220SW | GEO Specialty Chemicals | GEOlube® IL220SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibili...veja mais GEOlube® IL220SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibility characteristics (according to ASTM D1401). This product is manufactured to provide a viscosity of 237 cSt @ 40°C, and is typically used for the lubrication of calenders and piston compressors, as well as the lubrication of bevel, spiral bevel, helical, enclosed spur, and worm gear units. veja menos | |
| GEOlube® IL320SW | GEO Specialty Chemicals | GEOlube® IL320SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibili...veja mais GEOlube® IL320SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibility characteristics (according to ASTM D1401). This product is manufactured to provide a viscosity of 325 cSt @ 40°C, and is typically used for the lubrication of calenders and piston compressors, as well as the lubrication of bevel, spiral bevel, helical, enclosed spur, and worm gear units. veja menos | |
| GEOlube® IL460SW | GEO Specialty Chemicals | GEOlube® IL460SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibili...veja mais GEOlube® IL460SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibility characteristics (according to ASTM D1401). This product is manufactured to provide a viscosity of 433 cSt @ 40°C, and is typically used for the lubrication of calenders and piston compressors, as well as the lubrication of bevel, spiral bevel, helical, enclosed spur, and worm gear units. veja menos | |
| GEOlube® IL680SW | GEO Specialty Chemicals | GEOlube® IL680SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibili...veja mais GEOlube® IL680SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibility characteristics (according to ASTM D1401). This product is manufactured to provide a viscosity of 660 cSt @ 40°C, and is typically used for the lubrication of calenders and piston compressors, as well as the lubrication of bevel, spiral bevel, helical, enclosed spur, and worm gear units. veja menos | |
| GEOlube® LPG 9 | GEO Specialty Chemicals | GEOlube® Compressor Lube LPG 9 is a high performance gas compressor lubricant based on a polyalkylene glycol. It is designed for enclosed pattern gas compressors for hydrocarbon and chemical gases where the crankcase and bearings operate in a gas-filled a...veja mais GEOlube® Compressor Lube LPG 9 is a high performance gas compressor lubricant based on a polyalkylene glycol. It is designed for enclosed pattern gas compressors for hydrocarbon and chemical gases where the crankcase and bearings operate in a gas-filled atmosphere. Under these conditions, the gas is readily soluble in mineral oil lubricants, which, on dilution, suffer a significant drop in viscosity (see Figure 1) and lubricant performance. This problem can be overcome by using GEOlube® LPG 9, in which the gases are much less soluble. GEOlube® LPG 9 is particularly suitable for marine service on vessels carrying specialist liquefied gas cargoes. veja menos | |
| GEOlube® MAC 100 | GEO Specialty Chemicals | GEOlube® MAC 100 is a fully formulated ISO grade polyalkylene lubricant designed specifically for application with R-134a in mobile A/C systems or in A/C systems where the compressor requires a lubricant with viscosity of 97.6 cSt @ 40°C. GEOlube® MAC gra...veja mais GEOlube® MAC 100 is a fully formulated ISO grade polyalkylene lubricant designed specifically for application with R-134a in mobile A/C systems or in A/C systems where the compressor requires a lubricant with viscosity of 97.6 cSt @ 40°C. GEOlube® MAC grades are suitable for applications where older vehicles using the R-12/mineral oil combination are being retrofitted from CFC R-12 to HFC R-134a. They demonstrate excellent solubility with R-12, are stable with residual levels of R-12 and are also miscible and stable with residual levels of mineral oil. veja menos | |
| GEOlube® MAC 150 | GEO Specialty Chemicals | GEOlube® MAC 150 is a fully formulated ISO grade polyalkylene lubricant designed specifically for application with R-134a in mobile A/C systems or in A/C systems where the compressor requires a lubricant with viscosity of 145.2 cSt @ 40°C. GEOlube® MAC gr...veja mais GEOlube® MAC 150 is a fully formulated ISO grade polyalkylene lubricant designed specifically for application with R-134a in mobile A/C systems or in A/C systems where the compressor requires a lubricant with viscosity of 145.2 cSt @ 40°C. GEOlube® MAC grades are suitable for applications where older vehicles using the R-12/mineral oil combination are being retrofitted from CFC R-12 to HFC R-134a. They demonstrate excellent solubility with R-12, are stable with residual levels of R-12 and are also miscible and stable with residual levels of mineral oil. veja menos | |
| GEOlube® MAC 46 | GEO Specialty Chemicals | GEOlube® MAC 46 is a fully formulated ISO grade polyalkylene lubricant designed specifically for application with R-134a in mobile A/C systems or in A/C systems where the compressor requires a lubricant with viscosity of 42 cSt @ 40°C. GEOlube® MAC grades...veja mais GEOlube® MAC 46 is a fully formulated ISO grade polyalkylene lubricant designed specifically for application with R-134a in mobile A/C systems or in A/C systems where the compressor requires a lubricant with viscosity of 42 cSt @ 40°C. GEOlube® MAC grades are suitable for applications where older vehicles using the R-12/mineral oil combination are being retrofitted from CFC R-12 to HFC R-134a. They demonstrate excellent solubility with R-12, are stable with residual levels of R-12 and are also miscible and stable with residual levels of mineral oil. veja menos | |
| GEOlube® NF46 2180 | GEO Specialty Chemicals | GEOlube® NF46 2180 is a hydraulic fluid which can be produced either from the intermediate concentrates (NF46 2190 &2191) or directly from NF46 4005. It has a water content of 36%, and is widely used for heavy duty industrial service such as die casting ...veja mais GEOlube® NF46 2180 is a hydraulic fluid which can be produced either from the intermediate concentrates (NF46 2190 &2191) or directly from NF46 4005. It has a water content of 36%, and is widely used for heavy duty industrial service such as die casting where its excellent lubrication properties can be used to full advantage. veja menos | |
| GEOlube® NF46 2181 | GEO Specialty Chemicals | GEOlube® NF46 2181 is a hydraulic fluid which can be produced either from the intermediate concentrates (NF46 2190 &2191) or directly from NF46 4005. It has a water content of 36%, and is widely used for heavy duty industrial service such as die casting ...veja mais GEOlube® NF46 2181 is a hydraulic fluid which can be produced either from the intermediate concentrates (NF46 2190 &2191) or directly from NF46 4005. It has a water content of 36%, and is widely used for heavy duty industrial service such as die casting where its excellent lubrication properties can be used to full advantage. veja menos | |
| GEOlube® NF46 2190 | GEO Specialty Chemicals | GEOlube® NF46 2190 is an intermediate concentrate derived by blending mono-ethylene glycol with GEOlube® Concentrate NF46 4005. Supplying as concentrates allows formulators to use locally sourced glycol and water and therefore minimises transport costs. C...veja mais GEOlube® NF46 2190 is an intermediate concentrate derived by blending mono-ethylene glycol with GEOlube® Concentrate NF46 4005. Supplying as concentrates allows formulators to use locally sourced glycol and water and therefore minimises transport costs. Concentrates also offer considerable flexibility in blending finished hydraulic fluid. It is possible, for example, to select different glycols and different water contents to arrive at fluids offering various levels of performance. GEOlube® NF46 2190 is manufactured to provide a viscosity of 210 cSt @ 40°C, which makes provides easier handling than NF46 4005. veja menos | |
| GEOlube® NF46 2191 | GEO Specialty Chemicals | GEOlube® NF46 2191 is an intermediate concentrate derived by blending mono-ethylene glycol with GEOlube® Concentrate NF46 4005. Supplying as concentrates allows formulators to use locally sourced glycol and water and therefore minimises transport costs. C...veja mais GEOlube® NF46 2191 is an intermediate concentrate derived by blending mono-ethylene glycol with GEOlube® Concentrate NF46 4005. Supplying as concentrates allows formulators to use locally sourced glycol and water and therefore minimises transport costs. Concentrates also offer considerable flexibility in blending finished hydraulic fluid. It is possible, for example, to select different glycols and different water contents to arrive at fluids offering various levels of performance. GEOlube® NF46 2191 is manufactured to provide a viscosity of 370 cSt @ 40°C, which makes provides easier handling than NF46 4005. veja menos | |
| GEOlube® NF46 4005 | GEO Specialty Chemicals | GEOlube® NF46 4005 is a Hydrolube Concentrate which offers unique advantages to formulators of water glycol hydraulic fluids. Supplying as concentrates allows formulators to use locally sourced glycol and water and therefore minimises transport costs. Con...veja mais GEOlube® NF46 4005 is a Hydrolube Concentrate which offers unique advantages to formulators of water glycol hydraulic fluids. Supplying as concentrates allows formulators to use locally sourced glycol and water and therefore minimises transport costs. Concentrates also offer considerable flexibility in blending finished hydraulic fluid. It is possible, for example, to select different glycols and different water contents to arrive at fluids offering various levels of performance. GEOlube® NF46 4005 is manufactured to provide a viscosity of 1200 cSt @ 40°C. veja menos | |
| GEOlube® PEL NS | GEO Specialty Chemicals | GEOlube® PEL NS Polyethylene Extrusion Lubricant is a water soluble, high viscosity polyalkylene glycol based lubricant specifically designed to assist high temperature extrusion of polyethylene during the manufacture of high power electric cable. It has ...veja mais GEOlube® PEL NS Polyethylene Extrusion Lubricant is a water soluble, high viscosity polyalkylene glycol based lubricant specifically designed to assist high temperature extrusion of polyethylene during the manufacture of high power electric cable. It has been specifically formulated to provide minimal risk of staining or discoloration of polyethylene during the process, high thermo-oxidative stability up to 240°C, together with minimal deposit formation during use, resistance to the peroxide cross-linking in the polyethylene layers, and non-embrittlement of the polyethylene. veja menos | |
| GEOlube® Quenchant A | GEO Specialty Chemicals | GEOlube® Quenchant A is an established product that encompasses a nitrite based corrosion inhibition system. GEOlube® Quenchants are non-flammable polymeric fluids manufactured from an aqueous solution of polyalkylene glycol and corrosion inhibitor. These...veja mais GEOlube® Quenchant A is an established product that encompasses a nitrite based corrosion inhibition system. GEOlube® Quenchants are non-flammable polymeric fluids manufactured from an aqueous solution of polyalkylene glycol and corrosion inhibitor. These are further diluted to a working concentration prior to use. veja menos | |
| GEOlube® Quenchant HQA | GEO Specialty Chemicals | GEOlube® Quenchant HQA is a concentrate designed to be transported over long distances, the low water volume making the product more cost effective. Once at its destination, GEOlube® Quenchant HQA can be diluted to manufacture Quenchant A, either for resa...veja mais GEOlube® Quenchant HQA is a concentrate designed to be transported over long distances, the low water volume making the product more cost effective. Once at its destination, GEOlube® Quenchant HQA can be diluted to manufacture Quenchant A, either for resale or as a usable product. GEOlube® Quenchants are non-flammable polymeric fluids manufactured from an aqueous solution of polyalkylene glycol and corrosion inhibitor. These are further diluted to a working concentration prior to use. veja menos | |
| GEOlube® Quenchant HT | GEO Specialty Chemicals | GEOlube® Quenchant HT is designed for use in integral furnace / bath systems or where the quench volume is reduced. This product has a higher cloud point, thus minimising the risk of bulk inversion of the polymer. GEOlube® Quenchants are non-flammable pol...veja mais GEOlube® Quenchant HT is designed for use in integral furnace / bath systems or where the quench volume is reduced. This product has a higher cloud point, thus minimising the risk of bulk inversion of the polymer. GEOlube® Quenchants are non-flammable polymeric fluids manufactured from an aqueous solution of polyalkylene glycol and corrosion inhibitor. These are further diluted to a working concentration prior to use. veja menos | |
| GEOlube® Quenchant NF 18 | GEO Specialty Chemicals | GEOlube® Quenchant NF 18 is a nitrite free alternative to GEOlube® Quenchant A. GEOlube® Quenchants are non-flammable polymeric fluids manufactured from an aqueous solution of polyalkylene glycol and corrosion inhibitor. These are further diluted to a wor...veja mais GEOlube® Quenchant NF 18 is a nitrite free alternative to GEOlube® Quenchant A. GEOlube® Quenchants are non-flammable polymeric fluids manufactured from an aqueous solution of polyalkylene glycol and corrosion inhibitor. These are further diluted to a working concentration prior to use. veja menos | |
| GEOlube® RFL 100-X | GEO Specialty Chemicals | GEOlube® RFL 100-X is a high performance novel polyalkylene glycol lubricant for CO2 based air-conditioning / refrigeration systems. Particular challenges and requirements exist when selecting lubricants for CO2 based refrigeration systems. GEOlube® RFL g...veja mais GEOlube® RFL 100-X is a high performance novel polyalkylene glycol lubricant for CO2 based air-conditioning / refrigeration systems. Particular challenges and requirements exist when selecting lubricants for CO2 based refrigeration systems. GEOlube® RFL grades offer improved miscibility with CO2 over a wide range of lubricant concentration and temperatures. This results in excellent lubricity and increased efficiency of the refrigeration system. The GEOlube® RFL grades have reduced hygroscopicity compared with uncapped PAGs, which have a water absorbing tendency. They also offer high chemical, thermal and hydrolytic stability. veja menos | |
| GEOlube® RFL 46-X | GEO Specialty Chemicals | GEOlube® RFL 46-X is a high performance novel polyalkylene glycol lubricant for CO2 based air-conditioning / refrigeration systems. Particular challenges and requirements exist when selecting lubricants for CO2 based refrigeration systems. GEOlube® RFL gr...veja mais GEOlube® RFL 46-X is a high performance novel polyalkylene glycol lubricant for CO2 based air-conditioning / refrigeration systems. Particular challenges and requirements exist when selecting lubricants for CO2 based refrigeration systems. GEOlube® RFL grades offer improved miscibility with CO2 over a wide range of lubricant concentration and temperatures. This results in excellent lubricity and increased efficiency of the refrigeration system. The GEOlube® RFL grades have reduced hygroscopicity compared with uncapped PAGs, which have a water absorbing tendency. They also offer high chemical, thermal and hydrolytic stability. veja menos | |
| GEOlube® RFL 68-X | GEO Specialty Chemicals | GEOlube® RFL 68-X is a high performance novel polyalkylene glycol lubricant for CO2 based air-conditioning / refrigeration systems. Particular challenges and requirements exist when selecting lubricants for CO2 based refrigeration systems. GEOlube® RFL gr...veja mais GEOlube® RFL 68-X is a high performance novel polyalkylene glycol lubricant for CO2 based air-conditioning / refrigeration systems. Particular challenges and requirements exist when selecting lubricants for CO2 based refrigeration systems. GEOlube® RFL grades offer improved miscibility with CO2 over a wide range of lubricant concentration and temperatures. This results in excellent lubricity and increased efficiency of the refrigeration system. The GEOlube® RFL grades have reduced hygroscopicity compared with uncapped PAGs, which have a water absorbing tendency. They also offer high chemical, thermal and hydrolytic stability. veja menos | |
| GEOlube® SL 1000 | GEO Specialty Chemicals | GEOlube® SL 1000 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 1000 cSt @ 40°C. The GEOlube® SL grades have been specifically formulated for...veja mais GEOlube® SL 1000 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 1000 cSt @ 40°C. The GEOlube® SL grades have been specifically formulated for use as industrial gearbox lubricants and find application within the most severe environments. As such, they have achieved approval for use within a number of different gear designs, including helical, bevel helical, planetary, and worm gears. veja menos | |
| GEOlube® SL 150 | GEO Specialty Chemicals | GEOlube® SL 150 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 150 cSt @ 40°C. The GEOlube® SL grades have been specifically formulated for u...veja mais GEOlube® SL 150 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 150 cSt @ 40°C. The GEOlube® SL grades have been specifically formulated for use as industrial gearbox lubricants and find application within the most severe environments. As such, they have achieved approval for use within a number of different gear designs, including helical, bevel helical, planetary, and worm gears. veja menos | |
| GEOlube® SL 220 | GEO Specialty Chemicals | GEOlube® SL 220 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 227 cSt @ 40°C. The GEOlube® SL grades have been specifically formulated for u...veja mais GEOlube® SL 220 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 227 cSt @ 40°C. The GEOlube® SL grades have been specifically formulated for use as industrial gearbox lubricants and find application within the most severe environments. As such, they have achieved approval for use within a number of different gear designs, including helical, bevel helical, planetary, and worm gears. veja menos | |
| GEOlube® SL 320 | GEO Specialty Chemicals | GEOlube® SL 320 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 339 cSt @ 40°C. The GEOlube® SL grades have been specifically formulated for u...veja mais GEOlube® SL 320 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 339 cSt @ 40°C. The GEOlube® SL grades have been specifically formulated for use as industrial gearbox lubricants and find application within the most severe environments. As such, they have achieved approval for use within a number of different gear designs, including helical, bevel helical, planetary, and worm gears. veja menos | |
| GEOlube® SL 460 | GEO Specialty Chemicals | GEOlube® SL 460 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 477 cSt @ 40°C. The GEOlube® SL grades have been specifically formulated for u...veja mais GEOlube® SL 460 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 477 cSt @ 40°C. The GEOlube® SL grades have been specifically formulated for use as industrial gearbox lubricants and find application within the most severe environments. As such, they have achieved approval for use within a number of different gear designs, including helical, bevel helical, planetary, and worm gears. veja menos |
