| ORGASOL® 2002 ES4 NAT 3 | Arkema | ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...veja mais ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. veja menos | Request Sample |
| ORGASOL® 2002 ES5 NAT 3 | Arkema | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...veja mais ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. veja menos | Request Sample |
| ORGASOL® 2002 ES6 NAT 3 | Arkema | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...veja mais ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. veja menos | Request Sample |
| ORGASOL® 2002 EXD NAT 1 | Arkema | ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...veja mais ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). veja menos | Request Sample |
| ORGASOL® 3501 EXD NAT 1 | Arkema | ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ...veja mais ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 10µm. veja menos | Request Sample |
| ORGASOL® 3502 D NAT 1 | Arkema | ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ab...veja mais ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 20µm. veja menos | Request Sample |
| OTL-B-5 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-B-5 is a high quality concentrated aqueous pigment dispersion, pigment type of Carbon Black, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, c...veja mais OTL-B-5 is a high quality concentrated aqueous pigment dispersion, pigment type of Carbon Black, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-BE-50 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-BE-50 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings,...veja mais OTL-BE-50 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-BE-51 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-BE-51 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings,...veja mais OTL-BE-51 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-G-49 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-G-49 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Green, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings,...veja mais OTL-G-49 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Green, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-R-52 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-R-52 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Red, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, c...veja mais OTL-R-52 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Red, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-R-57 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, co...veja mais OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-W-58 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, co...veja mais OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-Y-53 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-Y-53 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings...veja mais OTL-Y-53 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-Y-54 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-Y-54 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings...veja mais OTL-Y-54 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| OTL-Y-55 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-Y-55 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, co...veja mais OTL-Y-55 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. veja menos | |
| Ottopol SF-42 | Gellner Industrial, LLC | Ottopol SF-42 is a translucent, anionic acrylic emulsion that is compatible with water-reducible alkyd emulsions. | |
| Ottopol SF-45 | Gellner Industrial, LLC | Ottopol SF-45 is a translucent, anionic acrylic emulsion. This unique acrylic polymer results in a high density, cross linked polymer upon drying at room temperature. Many coatings can be derived from this polymer where solvent resistance is required. | |
| P. GLYCOL ETHER PM ACETATE | Brenntag North America | P. GLYCOL ETHER PM ACETATE (Propylene glycol methyl ether acetate) is a colourless, combustible liquid with a low order of toxicity and a mild ester-like odour. It has excellent solvency for a variety of substances including acrylic, nitrocellulose and ur...veja mais P. GLYCOL ETHER PM ACETATE (Propylene glycol methyl ether acetate) is a colourless, combustible liquid with a low order of toxicity and a mild ester-like odour. It has excellent solvency for a variety of substances including acrylic, nitrocellulose and urethane coating resins. veja menos | Request Sample |
| Picassian® AC-049 | Stahl Polymers | Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss p...veja mais Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss properties, high UV resistance properties, and good outdoor durability. veja menos | |
| Picassian® AC-122 | Stahl Polymers | Picassian® AC-122 is a waterbased anionic self crosslinking styrene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking properties, good chemical resistance properties...veja mais Picassian® AC-122 is a waterbased anionic self crosslinking styrene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking properties, good chemical resistance properties, good scratch resistance, good clarity properties, good gloss properties, and is quick and easy to sand. veja menos | |
| Picassian® AC-169 | Stahl Polymers | Picassian® AC-169 is a waterbased anionic self crosslinking stryene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking resistance properties, good scratch resistance ...veja mais Picassian® AC-169 is a waterbased anionic self crosslinking stryene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking resistance properties, good scratch resistance properties, good clarity properties, and is quick and easy to sand. veja menos | |
| Picassian® AC-176 | Stahl Polymers | Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistanc...veja mais Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistance, has good adhesion properties on a varity of metallic and plastic substrates, has good mechanical properties, and makes films clear, hard, flexiable, and glossy. veja menos | |
| Picassian® AC-177 | Stahl Polymers | Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion p...veja mais Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion properties with plastic and metallic substrates, good outdoor resistance properties, good UV resistance properties, and good mechanical properties. veja menos | |
| Picassian® AC-192 | Stahl Polymers | Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good sc...veja mais Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good scratch resistance properties, has good transparency properties, is easy to sand, is quick to sand, and is crosslinkable with isocyanates. veja menos | |
| Picassian® AC-246 | Stahl Polymers | Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good g...veja mais Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good grease resistance properties, good alcohol compatibility, and good pigment compatibility. veja menos | |
| PLIOTEC® SC 75 | Omnova Solutions | PLIOTEC® SC 75 is a self-crosslinking acrylic emulsion. It is APE free, and offers excellent UV resistance, good blocking resistance, and low coalescent demand. This product shows excellent adhesion to many substrates, including cold rolled steel, and can...veja mais PLIOTEC® SC 75 is a self-crosslinking acrylic emulsion. It is APE free, and offers excellent UV resistance, good blocking resistance, and low coalescent demand. This product shows excellent adhesion to many substrates, including cold rolled steel, and can be formulated as a zero VOC product. This product is recommended for porch and floor enamels, from flat to semi-gloss finishes, as well as vertical pigmented stains, pigmented pool deck coatings, and concrete and wood stains and enamels. veja menos | |
| Polurene AC510 | S.A.P.I.C.I. SpA | Polurene AC510 is an aromatic isocyanurate. This product is highly compatible with nitrocellulose, aromatic solvents, saturated polyesters, hydroxide acrylic and vinyl resins. It can be used in sealers and topcoats for wood, metal and paper. This produ...veja mais Polurene AC510 is an aromatic isocyanurate. This product is highly compatible with nitrocellulose, aromatic solvents, saturated polyesters, hydroxide acrylic and vinyl resins. It can be used in sealers and topcoats for wood, metal and paper. This product contains less than .7% TDI isocyanates. veja menos | |
| Polurene MT 100 | S.A.P.I.C.I. SpA | Polurene MT 100 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanates. | |
| Polurene MT 100 LLV | S.A.P.I.C.I. SpA | Polurene MT 100 LLV is an HDI trymer. This product is designed for non-yellowing systems. It can be used in 2K enamels for metal, wood and plastics that contain high solids. This product contains less than .2% HDI isocyanates. | |
| Polurene MT 75 | S.A.P.I.C.I. SpA | Polurene MT 75 is an aliphatic polyisocyanate. This product is designed for non-yellowing systems with improved performance. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyesters in order to make 2K paints a...veja mais Polurene MT 75 is an aliphatic polyisocyanate. This product is designed for non-yellowing systems with improved performance. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyesters in order to make 2K paints and enamels for metal, wood and plastics. This product contains less than .2% HDI isocyanates. veja menos | |
| Polurene MT 90 | S.A.P.I.C.I. SpA | Polurene MT 90 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low viscosity 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanat...veja mais Polurene MT 90 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low viscosity 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanates. veja menos | |
| Polurene MT 90 AB | S.A.P.I.C.I. SpA | Polurene MT 90 AB is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low-viscosity 2K paints and enamels for metal, wood and plastics that contain high solids. This product contains less than .2% HDI isocyanates. | |
| Polurene OK-HP | S.A.P.I.C.I. SpA | Polurene OK-HP is an aliphatic-aromatic isocyanurate. This product is compatible with aromatic solvents, nitrocellulose, CAB, and hydroxide acrylic resins. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with...veja mais Polurene OK-HP is an aliphatic-aromatic isocyanurate. This product is compatible with aromatic solvents, nitrocellulose, CAB, and hydroxide acrylic resins. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics, and other substrates. This product contains less than .5% TDI or HDI isocyanates. veja menos | |
| Polurene OK.D | S.A.P.I.C.I. SpA | Polurene OK.D is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics, and other s...veja mais Polurene OK.D is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics, and other substrates. This product contains less than .5% TDI or HDI isocyanates. veja menos | |
| Polurene OK.D.S | S.A.P.I.C.I. SpA | Polurene OK.D.S is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose and hydroxide acrylic resins. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention f...veja mais Polurene OK.D.S is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose and hydroxide acrylic resins. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics, and other substrates. This product contains less than .5% TDI or HDI isocyanates. veja menos | |
| Polurgreen OK-01 | S.A.P.I.C.I. SpA | Polurgreen OK-01 is a low-monomer mixed isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels for metal, plastics, and other substrates that need good c...veja mais Polurgreen OK-01 is a low-monomer mixed isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels for metal, plastics, and other substrates that need good color retention. This product contains less than .1% TDI and .1% HDI isocyanates. veja menos | |
| Polydo GY-3000 | Kukdo Chemical Co., Ltd. | Polydo GY-3000 polyether polyol is a glycerine initiated, nominal 3,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applica...veja mais Polydo GY-3000 polyether polyol is a glycerine initiated, nominal 3,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applications. veja menos | |
| Polydo GY-4000 | Kukdo Chemical Co., Ltd. | Polydo GY-4000 polyether polyol is a glycerine initiated, nominal 4,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applica...veja mais Polydo GY-4000 polyether polyol is a glycerine initiated, nominal 4,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applications. veja menos | |
| POLYESTER ACRYLATE 03-849 | Rahn USA Corp. | POLYESTER ACRYLATE 03-849 is a polyester acrylate resin for radically curable inks, coatings and adhesives. The product provides good adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. It is recommended for use in print...veja mais POLYESTER ACRYLATE 03-849 is a polyester acrylate resin for radically curable inks, coatings and adhesives. The product provides good adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. It is recommended for use in printing inks and varnishes, overprint varnishes, plastic coatings and wood and industrial coatings. veja menos | Request Sample |
| Polyester Actylate SP 281 | Soltech Ltd | Polyester Actylate SP 281 is a low viscosity amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing. Common applications of this product include clear coatings, high gloss co...veja mais Polyester Actylate SP 281 is a low viscosity amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing. Common applications of this product include clear coatings, high gloss coatings, top coatings for wood, flexographic inks, and screen inks, Polyester Actylate SP 281 is 100% polymer solid by weight with a viscosity of 80-120 at 25℃. veja menos | |
| Polyester Actylate SP 283 | Soltech Ltd | Polyester Actylate SP 283 is an amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing, and low residual odor. Common applications of this product include clear coatings, hig...veja mais Polyester Actylate SP 283 is an amino modified multi-functional polyester acrylate oligomer designed to provide light color, high gloss, low viscosity, and fast curing, and low residual odor. Common applications of this product include clear coatings, high gloss coatings, top coatings for wood, flexographic inks, and screen inks, Polyester Actylate SP 283 is 100% polymer solid by weight with a viscosity of 1,000-2,000 at 25℃. veja menos | |
| PolyQ® 9300 | Double Bond Chemical Ind., Co., Ltd. | PolyQ® 9300 is a self UV curing pre-polymer without photoinitiator. The UV/EB cured products based on PolyQ® 9300 are characterized by the following performance properties: no residual odor after curing; no extractions; non yellowing & excellent weatherab...veja mais PolyQ® 9300 is a self UV curing pre-polymer without photoinitiator. The UV/EB cured products based on PolyQ® 9300 are characterized by the following performance properties: no residual odor after curing; no extractions; non yellowing & excellent weatherability; and liquid type for easy handling. Formulated UV/EB curable products containing PolyQ® 9300 may be applied by lithographic, screen, gravure, direct or reverse roll, and curtain coating methods. PolyQ® 9300 is recommended for use in the following applications: plastic coating (PVC floor, ABS, PC, etc.); wood fillers and top coats; clear coatings in paper and plastics; and food package. This product appears as a clear yellowish liquid. veja menos | |
| R4-1140 | NuSil Silicone Technology 1 | R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wo...veja mais R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wood, painted surfaces, many plastics and other silicone rubbers. veja menos | |
| RAYCORE® 9506A | Specialty Polymers, Inc. | RAYCORE® 9506A is anionic hydroxyl functional polyurethane-acrylic core shell hybrid. This product is intended to offer chemical, scratch and UV resistance. It has the ability to be cross-linked with isocyanates or melamines. It is intended for hard surfa...veja mais RAYCORE® 9506A is anionic hydroxyl functional polyurethane-acrylic core shell hybrid. This product is intended to offer chemical, scratch and UV resistance. It has the ability to be cross-linked with isocyanates or melamines. It is intended for hard surfaces and to produce scratch resistance. This product primarily is used for topcoat chemical, water and scratches resistance on hard wood and cement surfaces. veja menos | |
| RAYCRYL® 1096 | Specialty Polymers, Inc. | RAYCRYL® 1096 is a clear anionic acrylic core shell polymer and is classified as an efflorescence resistant polymer. This product is designed for architectural, concretes and woods. It passes Kitchen Cabinet Manufacture Association (KCMA) testing for wood...veja mais RAYCRYL® 1096 is a clear anionic acrylic core shell polymer and is classified as an efflorescence resistant polymer. This product is designed for architectural, concretes and woods. It passes Kitchen Cabinet Manufacture Association (KCMA) testing for wood applications. It has hot wet block resistance on concrete as a sealer. The primary use for this product is for moisture and effofescence resistance, clear topcoats and scratch/chemical resistance. veja menos | |
| RAYCRYL® 1120 | Specialty Polymers, Inc. | RAYCRYL® 1120 is anionic self-crosslinking acrylic core shell polymer emulsion that is APEO and formaldehyde free. This product has adhesion properties that allow for architectural concrete and to be applied to woods. This product passes KCMA testing for ...veja mais RAYCRYL® 1120 is anionic self-crosslinking acrylic core shell polymer emulsion that is APEO and formaldehyde free. This product has adhesion properties that allow for architectural concrete and to be applied to woods. This product passes KCMA testing for wood applications; it is primarily used for a concrete sealer. This product also protects woods and concretes from scratches and chemical corrosion. veja menos | |
| RAYCRYL® 1240 | Specialty Polymers, Inc. | RAYCRYL® 1240 is anionic all-acrylic emulsion. This product can be used in metal and wood applications. RAYCRYL® 1240 primary use is as a sanding sealer, it adheres to metal or wood surfaces and has minimal grain raise and fills in the pours after the sur...veja mais RAYCRYL® 1240 is anionic all-acrylic emulsion. This product can be used in metal and wood applications. RAYCRYL® 1240 primary use is as a sanding sealer, it adheres to metal or wood surfaces and has minimal grain raise and fills in the pours after the surface has been sanded to seal the surface. veja menos | |
| RAYCRYL® 1526 | Specialty Polymers, Inc. | RAYCRYL® 1526 is an anionic APEO free, fully acrylic emulsion polymer. This product was intended for applying both interior and exterior trim enamel. It has a high gloss finish, color recognition and rheology. RAYCRYL® 1526 is applied to adhere to the woo...veja mais RAYCRYL® 1526 is an anionic APEO free, fully acrylic emulsion polymer. This product was intended for applying both interior and exterior trim enamel. It has a high gloss finish, color recognition and rheology. RAYCRYL® 1526 is applied to adhere to the wood, aged alkyd, and cement surfaces; and is primarily used to protect surfaces from water resistance and a sealer for concrete. veja menos | |
| RAYCRYL® 918K | Specialty Polymers, Inc. | RAYCRYL® 918K is an anionic reactive acrylic emulsion for catalyzed systems. This product has a crosslinkable chemical build up that allows it to block and resist water, along with outdoor stability. RAYCRYL® 918K has a hydroxyl utility that allows it to...veja mais RAYCRYL® 918K is an anionic reactive acrylic emulsion for catalyzed systems. This product has a crosslinkable chemical build up that allows it to block and resist water, along with outdoor stability. RAYCRYL® 918K has a hydroxyl utility that allows it to react to isocyanate and gives it chemical resistance. The primary use for this product is to be used as a topcoat and provide surfaces such as cement and wood with chemical, water and UV resistance. veja menos | |
| RAYKOTE® 1431 | Specialty Polymers, Inc. | RAYKOTE® 1431 is a clear anionic styrene acrylic emulsion polymer. This product is intended as a cost-effective and user-friendly emulsion. The primary use for this product is for industrial wood and primer applications. RAYKOTE® 1431 is applied on manufa...veja mais RAYKOTE® 1431 is a clear anionic styrene acrylic emulsion polymer. This product is intended as a cost-effective and user-friendly emulsion. The primary use for this product is for industrial wood and primer applications. RAYKOTE® 1431 is applied on manufactured interiors and exterior wood primers. veja menos | |
| RAYKOTE® 1610 | Specialty Polymers, Inc. | RAYKOTE® 1610 is an anionic styrene acrylic emulsion. This product has the capabilities to adhere to multiple different surfaces. RAYKOTE® 1610 is primarily used for water resistance on several different surfaces due to its low surfactant loading. It pass...veja mais RAYKOTE® 1610 is an anionic styrene acrylic emulsion. This product has the capabilities to adhere to multiple different surfaces. RAYKOTE® 1610 is primarily used for water resistance on several different surfaces due to its low surfactant loading. It passes class A type 1 ASTM C1315 for concrete and also passes KCMA. veja menos | |
| RAYKOTE® 2000 | Specialty Polymers, Inc. | RAYKOTE® 2000 is an anionic styrene acrylic emulsion polymer that is developed to have a low film forming temperature, and easily is formulated into VOC for indoor and outdoor primers. This product is intended to provide a tannin stain block resistance. R...veja mais RAYKOTE® 2000 is an anionic styrene acrylic emulsion polymer that is developed to have a low film forming temperature, and easily is formulated into VOC for indoor and outdoor primers. This product is intended to provide a tannin stain block resistance. RAYKOTE® 2000 is a formulated coating that is able to adhere wet and dry to galvanized, aluminum, wood and aged alkyd enamel materials. veja menos | |
| RAYPLUS™ 1097 | Specialty Polymers, Inc. | RAYPLUS™ 1097 is an anionic aluminum oxide infused core shell acrylic polymer, intended to be a topcoat. RAYPLUS™ 1097 is primarily used in coatings to adhere to wood, concrete and plastic materials. This product provides a topcoat that has chemical and s...veja mais RAYPLUS™ 1097 is an anionic aluminum oxide infused core shell acrylic polymer, intended to be a topcoat. RAYPLUS™ 1097 is primarily used in coatings to adhere to wood, concrete and plastic materials. This product provides a topcoat that has chemical and scratch resistance. RAYPLUS™ 1097 has wet block resistance that provides water resistance and allows it to be a concrete sealer. veja menos | |
| RAYPLUS™ 1098 | Specialty Polymers, Inc. | RAYPLUS™ 1098 is a transparent anionic core shell acrylic emulsion polymer, intended to be a topcoat. RAYPLUS™ 1098 is primarily used in coatings to adhere to wood, concrete and plastic materials. This product provides a clear glossy topcoat that is resis...veja mais RAYPLUS™ 1098 is a transparent anionic core shell acrylic emulsion polymer, intended to be a topcoat. RAYPLUS™ 1098 is primarily used in coatings to adhere to wood, concrete and plastic materials. This product provides a clear glossy topcoat that is resistant to water, UV rays and chemical abrasion. veja menos | |
| Reactol™ 1717H A | Lawter | Reactol™ 1717H A is a polyketone resin with high alcohol solubility and whose high melt point ensures improved heat resistance and better blocking resistance than other resins in the group. The resin exhibits high polarity allowing for improved pigment we...veja mais Reactol™ 1717H A is a polyketone resin with high alcohol solubility and whose high melt point ensures improved heat resistance and better blocking resistance than other resins in the group. The resin exhibits high polarity allowing for improved pigment wetting, gloss and adhesion. Reactol™ 1717H A is used in vinyl sealers and coatings, cellulose lacquers and in flexographic and rotogravure inks. veja menos | |
| Reactol™ 1979 A | Lawter | Reactol™ 1979 A is a hydroxyl functional polyester with good gloss in pigmented inks and overprints. It also offers good flexibility, adhesion and pigment wetting properties with low viscosity features. The resin is compatible with cellulose esters and ni...veja mais Reactol™ 1979 A is a hydroxyl functional polyester with good gloss in pigmented inks and overprints. It also offers good flexibility, adhesion and pigment wetting properties with low viscosity features. The resin is compatible with cellulose esters and nitrocellulose and can be cross-linked with melamine to create a glossy thermoset coating with good color retention. Reactol™ 1979 A is used in flexographic and gravure inks and in paper and wood coatings. veja menos | |
| Reactol™ 3107 A | Lawter | Reactol™ 3107 A is a condensate resin polymer which rids bleeding of dyes when moisture and grease are present. It enhances solubility of dyes in solvent systems with greater dye concentrations leading to better tint strength and gloss. The exclusive use ...veja mais Reactol™ 3107 A is a condensate resin polymer which rids bleeding of dyes when moisture and grease are present. It enhances solubility of dyes in solvent systems with greater dye concentrations leading to better tint strength and gloss. The exclusive use of the resin binder eliminates discoloration tendencies, leading to cleaner colors. The product is used in liquid inks and coatings and in wood stains and lacquers. veja menos | |
| Relca® HY-625 | Stahl Polymers | Relca® HY-625 is an aqueous anionic dispersion of an aliphatic polyester urethane. It is used in wood and parquet flooring, furniture coatings, and wood coatings. This product is solvent free, has good Taber abrasion resistance properties, good water resi...veja mais Relca® HY-625 is an aqueous anionic dispersion of an aliphatic polyester urethane. It is used in wood and parquet flooring, furniture coatings, and wood coatings. This product is solvent free, has good Taber abrasion resistance properties, good water resistance properties, good hydrolysis resistance properties, high hardness properties, and good adhesion properties with wood. veja menos | |
| Relca® PU-426 | Stahl Polymers | Relca® PU-426 is an aqueous anionic dispersion of an aliphatic polycarbonate polyether urethane. It is used in industrial wood, flexible plastic coatings, metal topcoats. This product is TEA free, solvent free, has good hydrolysis resistance properties, g...veja mais Relca® PU-426 is an aqueous anionic dispersion of an aliphatic polycarbonate polyether urethane. It is used in industrial wood, flexible plastic coatings, metal topcoats. This product is TEA free, solvent free, has good hydrolysis resistance properties, good weather resistance properties, good alcohol resistance properties, and good compatibility with other binders. veja menos | |
| Relca® PU-476 | Stahl Polymers | Relca® PU-476 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in interior DTM applications, wood coatings, and parquet flooring. This product is solvent free, has good open time properties, high hardness properties, go...veja mais Relca® PU-476 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in interior DTM applications, wood coatings, and parquet flooring. This product is solvent free, has good open time properties, high hardness properties, good adhesion properties, good chemical resistance properties, good pigment wetting properties, good scratch resistance properties, and good black heel mar resistance properties. veja menos | |
| Relca® PU-655 | Stahl Polymers | Relca PU-655 is an aqueous, anionic dispersion of an aliphatic polycarbonate urethane. It is used in parquet flooring, wood coatings, and metal pre-treatment. This product is solvent free, has good water resistance properties, good chemical resistance pro...veja mais Relca PU-655 is an aqueous, anionic dispersion of an aliphatic polycarbonate urethane. It is used in parquet flooring, wood coatings, and metal pre-treatment. This product is solvent free, has good water resistance properties, good chemical resistance properties, good hydrolysis resistance properties, and good adhesion properties with metal and wood. veja menos | |
| Rexin DP 412 | S.A.P.I.C.I. SpA | Rexin DP 412 is a slightly branched solventless saturated polyester resin. This product has high chemical resistance and good elasticity. It can be used in coatings and enamels for metal, plastic, wood and rubber. | |
| RILSAN® D30 NAT | Arkema | RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...veja mais RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 21-27µm. veja menos | Request Sample |
| RILSAN® D40 NAT | Arkema | RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...veja mais RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 27-31µm. veja menos | Request Sample |
| RILSAN® D50 NAT | Arkema | RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...veja mais RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 40-46µm. veja menos | Request Sample |
| RILSAN® D60 NAT | Arkema | RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...veja mais RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 43-55µm. veja menos | Request Sample |
| RILSAN® D80 NAT | Arkema | RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...veja mais RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 95-105µm. veja menos | Request Sample |
| Rovene® 4310 | Mallard Creek Polymers, Inc. | Rovene® 4310 is a medium soft carboxylated styrene-butadiene emulsion designed for formulation of general purpose labels and construction adhesives. Its styrene content (45%) allows for the formulation of general purpose labels and construction adhesives ...veja mais Rovene® 4310 is a medium soft carboxylated styrene-butadiene emulsion designed for formulation of general purpose labels and construction adhesives. Its styrene content (45%) allows for the formulation of general purpose labels and construction adhesives which provide excellent adhesion to a variety of substrates. Rovene® 4310 has compatibility with a wide variety of commercial tackifier resins and has excellent filler tolerance. veja menos | |
| Rovene® 4541 | Mallard Creek Polymers, Inc. | Rovene® 4541 is a carboxylated styrene-butadiene emulsion that has an outstanding strength and pigment binding properties. Rovene® 4541 provides good a good balance of dry & wet strength, capacity to accept high filler loading, block resistance, and adhes...veja mais Rovene® 4541 is a carboxylated styrene-butadiene emulsion that has an outstanding strength and pigment binding properties. Rovene® 4541 provides good a good balance of dry & wet strength, capacity to accept high filler loading, block resistance, and adhesion to multiple substrates including wood and metal. veja menos | |
| SA-207 | STI Polymer | SA-207 is a white liquid form acrylic polymer. This product is most commonly used as a coating in masonry, wood, and architectural applications. | |
| Sarbox SB401 | Sartomer Americas | O Sarbox SB401 é altamente funcional, ácido carboxílico e anidrido com oligômero metacrílico, misturados com solvente propinato etil-3-etoxi (EEP). Ele oferece uma rápida velocidade de cura e e excelente aderência ao cobre. Tem um alto número de ácido par...veja mais O Sarbox SB401 é altamente funcional, ácido carboxílico e anidrido com oligômero metacrílico, misturados com solvente propinato etil-3-etoxi (EEP). Ele oferece uma rápida velocidade de cura e e excelente aderência ao cobre. Tem um alto número de ácido para retirada alcalina. O Sarbox SB401 também oferece boa resistência a solventes e ácidos e excelente desenvolvimento de brilho aquoso. As aplicações sugeridas deste produto incluem revestimentos de metal, plástico e madeira, tintas e máscaras de solda e fotoresistores para eletrônicos. veja menos | |
| Sarbox SB510E35 | Sartomer Americas | O Sarbox SB510E35 é moderadamente funcional, ácido carboxílico e anidrido com oligômero metacrílico, monômero triacrilato trimetilolpropano etoxilatado. Ele oferece excelente cura velocidade, excelente aderência em metal e plástico, boas características ...veja mais O Sarbox SB510E35 é moderadamente funcional, ácido carboxílico e anidrido com oligômero metacrílico, monômero triacrilato trimetilolpropano etoxilatado. Ele oferece excelente cura velocidade, excelente aderência em metal e plástico, boas características umectantes e de fluxo. O Sarbox SB510E35 também possui excelente aderência de película fina ao aço electrocoberto. As aplicações sugeridas deste produto incluem adesivos, plastisóis, tintas de tela, flexogáficas e de gravura e revestimentos de papel, plástico, metal e madeira. veja menos | |
| SETAQUA® 6756 | Allnex | SETAQUA® 6756 is a surfactant free aqueous dispersion of acrylic polymers for highly durable furniture finishes, belonging to our ECOWISE™ CHOICE product range for selected applications. | Request Sample |
| SETAQUA® 6770 | Allnex | SETAQUA® 6770 is an acrylic copolymer emulsion intended for industrial air-dry interior and exterior pigmented wood coatings for the joinery industry. Coatings formulated with this product exhibit high gloss, good application properties and excellent bloc...veja mais SETAQUA® 6770 is an acrylic copolymer emulsion intended for industrial air-dry interior and exterior pigmented wood coatings for the joinery industry. Coatings formulated with this product exhibit high gloss, good application properties and excellent blocking resistance. This particular resin is designed with gradient particle morphology. It is ideal for topcoats and pigmented enamels, and air-dry coatings for interior and exterior pigmented wood finishes. veja menos | Request Sample |
| SETAQUA® 6781 | Allnex | SETAQUA® 6781 is an aqueous dispersion of acrylic polymers with gradient particle morphology. Its features include excellent blocking resistance, good application properties and high gloss. This product is suitable for air-drying interior and exterior pig...veja mais SETAQUA® 6781 is an aqueous dispersion of acrylic polymers with gradient particle morphology. Its features include excellent blocking resistance, good application properties and high gloss. This product is suitable for air-drying interior and exterior pigmented wood finishes for the joinery industry. veja menos | Request Sample |
| SETYRENE™ 13-2424 | Allnex | SETYRENE™ 13-2424 is an alkyd resin that has been copolymerized with vinyl toluene to produce a very rapid drying product. It has limited compatibility with medium oil alkyds, but may be blended up to 20% of the vehicle solids to significantly accelerate ...veja mais SETYRENE™ 13-2424 is an alkyd resin that has been copolymerized with vinyl toluene to produce a very rapid drying product. It has limited compatibility with medium oil alkyds, but may be blended up to 20% of the vehicle solids to significantly accelerate drying rates. veja menos | Request Sample |
| SHIKOH™ UV-1700B | Nippon Gohsei | SHIKOH™ UV-1700B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent adhesion and hardness properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tape...veja mais SHIKOH™ UV-1700B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent adhesion and hardness properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tapes, adhesive films and labels, and woodworking applications. veja menos | |
| SHIKOH™ UV-2000B | Nippon Gohsei | SHIKOH™ UV-2000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity and electrical sealing properties. This product is well suited for use in applications such as plastic and electronic coatings, optic...veja mais SHIKOH™ UV-2000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity and electrical sealing properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tapes, adhesive films and labels, and woodworking applications. veja menos | |
| SHIKOH™ UV-2750B | Nippon Gohsei | SHIKOH™ UV-2750B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength. This product is well suited for use in applications such as plastic and electronic coatings, optical disk printing inks, masking tapes...veja mais SHIKOH™ UV-2750B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength. This product is well suited for use in applications such as plastic and electronic coatings, optical disk printing inks, masking tapes, screen printing inks, adhesive films and labels, and woodworking applications. veja menos | |
| SHIKOH™ UV-6300B | Nippon Gohsei | SHIKOH™ UV-6300B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good stain and crack resistances. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and ...veja mais SHIKOH™ UV-6300B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good stain and crack resistances. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and labels, and woodworking applications. veja menos | |
| SHIKOH™ UV-6630B | Nippon Gohsei | SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, pla...veja mais SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, plastics, and electronics, as well as masking tapes and adhesive films and labels. veja menos | |
| SHIKOH™ UV-7000B | Nippon Gohsei | SHIKOH™ UV-7000B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, as well as good stain and abrasion resistances. This product is well suited for use in building and construction coatings, offset and scree...veja mais SHIKOH™ UV-7000B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, as well as good stain and abrasion resistances. This product is well suited for use in building and construction coatings, offset and screen printing inks, coatings for optical discs, woodworking, plastics, and electronics, adhesive films and labels, and masking tapes. veja menos | |
| SHIKOH™ UV-7461TE | Nippon Gohsei | SHIKOH™ UV-7461TE is a medium-hard-type, UV-curable urethane acrylate oligomer resin, diluted in acrylic ester. Featuring good weather resistance, this product is well suited for use in screen printing inks, coatings for optical discs, woodworking, plasti...veja mais SHIKOH™ UV-7461TE is a medium-hard-type, UV-curable urethane acrylate oligomer resin, diluted in acrylic ester. Featuring good weather resistance, this product is well suited for use in screen printing inks, coatings for optical discs, woodworking, plastics, and electronics, adhesive films and labels, and masking tapes. veja menos | |
| SHIKOH™ UV-7510B | Nippon Gohsei | SHIKOH™ UV-7510B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring good weather and water resistances, flexibility, and resistance to permanent marker. This product is well suited for use in building and construction coatings, a...veja mais SHIKOH™ UV-7510B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring good weather and water resistances, flexibility, and resistance to permanent marker. This product is well suited for use in building and construction coatings, adhesive films and labels, masking tapes, and coatings for optical discs, woodworking, plastics, and electronics. veja menos | |
| SHIKOH™ UV-7600B | Nippon Gohsei | SHIKOH™ UV-7600B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness and low shrinkage. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and l...veja mais SHIKOH™ UV-7600B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness and low shrinkage. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and labels, and woodworking applications. veja menos | |
| SHIKOH™ UV-7610B | Nippon Gohsei | SHIKOH™ UV-7610B is a hard-type, UV-curable urethane acrylate oligomer resin featuring a high molecular weight. This product is well suited for use in hard coatings for plastics, electronics, optical discs, and woodworking applications, as well as masking...veja mais SHIKOH™ UV-7610B is a hard-type, UV-curable urethane acrylate oligomer resin featuring a high molecular weight. This product is well suited for use in hard coatings for plastics, electronics, optical discs, and woodworking applications, as well as masking tapes and adhesive films and labels. veja menos | |
| SHIKOH™ UV-7620EA | Nippon Gohsei | SHIKOH™ UV-7620EA is a hard-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good adhesion on hard-to-adhere materials and tack-free surface formation, this product is well suited for use in coatings for optical discs...veja mais SHIKOH™ UV-7620EA is a hard-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good adhesion on hard-to-adhere materials and tack-free surface formation, this product is well suited for use in coatings for optical discs, plastics, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. veja menos | |
| SHIKOH™ UV-7630B | Nippon Gohsei | SHIKOH™ UV-7630B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good crack resistance. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking t...veja mais SHIKOH™ UV-7630B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good crack resistance. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. veja menos | |
| SHIKOH™ UV-7640B | Nippon Gohsei | SHIKOH™ UV-7640B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness, low shrinkage, and good abrasion resistance. This product is well suited for use in optical film hard coatings, masking tapes, coatings for plastics, ele...veja mais SHIKOH™ UV-7640B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness, low shrinkage, and good abrasion resistance. This product is well suited for use in optical film hard coatings, masking tapes, coatings for plastics, electronics, and woodworking applications, and adhesive films and labels. veja menos | |
| SHIKOH™ UV-7650B | Nippon Gohsei | SHIKOH™ UV-7650B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent flexibility. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking t...veja mais SHIKOH™ UV-7650B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent flexibility. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. veja menos | |
| Soluryl EW-842 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl EW-842 is a self-crosslinkable acrylic copolymer emulsion for use in 1K universal water-based wood coating. | |
| Soluryl RW-114 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RW-114 is a self-crosslink acrylic copolymer emulsion for use in water-based 1K wood coating. It is a non film forming emulsion, has excellent hardness, a good appearance, and compatibility with soluryl emulsions. | |
| Soluryl RW-116 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RW-116 is a self-crosslink acrylic copolymer emulsion for use in water-based 1K wood coating. | |
| Soluryl RW-842 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RW-842 is a self-crosslink acrylic copolymer emulsion for use in water-based 1K wood coating. It is ideal for use as a universal coating for top, primer and sealer of wood substrate. | |
| SP-120 | NuSil Silicone Technology 1 | SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of ...veja mais SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of the RTV systems to other substrates such as metals, ceramics, glass, and wood. veja menos | |
| SP-124 | NuSil Silicone Technology 1 | SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates s...veja mais SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates such as glass, ceramics, metal, rigid plastics, wood and some composites. It can be applied by wiping, brushing or dipping a uniform thin film onto the substrates. veja menos | |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...veja mais SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. veja menos | |
| SPHERILEX® DP-0110 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0110 has the smallest particle size within the SPHERILEX® family of products, making it ideal for thin film applications or systems where smaller particle-sized pigments are preferred to promote surface smoothness and higher 85-degree gloss....veja mais SPHERILEX® DP-0110 has the smallest particle size within the SPHERILEX® family of products, making it ideal for thin film applications or systems where smaller particle-sized pigments are preferred to promote surface smoothness and higher 85-degree gloss. In particular, SPHERILEX® DP-0110 is ideal for achieving burnish-and scrub-resistant satin and eggshell finishes, and, when used in combination with silica matting agents, can enable deep matte, natural-looking wood coatings that have improved scratch, burnish, and mar resistance. It can also significantly improve the hardness of coil coatings. veja menos | Request Sample |
| SPHERILEX® DP-0111 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0111 is a precipitated amorphous (crystalline free) silica with unique spherical particle shape and very narrow particle size distribution. | Request Sample |
