| A-Cat 0040 | FTC Korea Co.,Ltd | A-Cat 0040 has excellent stability in solvent soluble and water-based thermosetting system, low temperature cure, and a fast cure time. It is used in general industries coatings. | Request Sample |
| A-Cat 1050 | FTC Korea Co.,Ltd | A-Cat 1050 has excellent water and overbake resistance. Its application is of high temperature and can be used in printing inks, general industries coatings, and coil and can coatings. | Request Sample |
| A-Cat 1550 | FTC Korea Co.,Ltd | A-Cat 1550 is an excellent water, and salt spray with low conductivity for electrostatic. It is suitable for use in painting inks, coil coatings, industries coatings, can coatings, and waterborne can coatings. | Request Sample |
| ACRONAL® 4400 | BASF Dispersions & Resins | Acronal® 4400 is an all-acrylic aqueous polymer dispersion designed primarily for zinc oxide-free formulations. It is optimized to offer a broad spectrum of enhanced performance benefits, such as improved adhesion across a wide range of roofing substrates...veja mais Acronal® 4400 is an all-acrylic aqueous polymer dispersion designed primarily for zinc oxide-free formulations. It is optimized to offer a broad spectrum of enhanced performance benefits, such as improved adhesion across a wide range of roofing substrates, improved asphalt-bleed resistance, retention of film elasticity after weathering, and higher solar reflectivity due to enhanced dirt pick-up resistance. Further, Acronal® 4400 - when combined with BASF’s Quick-Trigger 4333 additive - delivers early rain resistance under even the most challenging weather conditions. Acronal® 4400 was value engineered to provide environmental benefits in zinc-free roof coating formulations and comply with the performance parameters of ASTM D 6083 & California Title 24 protocols. veja menos | |
| AEROSIL® R 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia. | Request Sample |
| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| AF-066 | FTC Korea Co.,Ltd | AF-066 is an excellent leveling agent and is highly effective at defoaming. It has good balance between effectiveness and compatibility. It is suitable for use in general industrial coating, wood and furniture coatings, printing inks, and architectural co...veja mais AF-066 is an excellent leveling agent and is highly effective at defoaming. It has good balance between effectiveness and compatibility. It is suitable for use in general industrial coating, wood and furniture coatings, printing inks, and architectural coatings. veja menos | Request Sample |
| AF-550 | FTC Korea Co.,Ltd | AF-550 is an excellent defoaming and leveling agent. It has good gloss and gloss retention with excellent visual clarity. It is suitable for use in PCM coating, flooring coatings, and general industrial coatings. | Request Sample |
| AF-900 | FTC Korea Co.,Ltd | AF-900 is an excellent defoaming and leveling agent. It has good gloss and gloss retention. It is suitable for use in PCM coating, flooring coating, and general industrial coating. | Request Sample |
| Altor™ 200 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 200 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. The formulation is designed to be tough but flexible, lightfast and for highly reactive two-component polyurethane spray coatings. | |
| Altor™ 201 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 201 polyaspartic ester is a low-color, solvent-free amine-functional reactive partner for polyisocyanates. This low viscosity amine functional resin was developed for use in the formulation of high solids two-component polyurethane-urea coatings. | |
| Altor™ 202 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 202 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. This was product was designed for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. | |
| Altor™ 205 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 205 is a 100% solids, UV resistant polyaspartic ester that maintains excellent cured film properties while increasing the pot life/working time when cured with an aliphatic polyisocyanate. It offers improved hardness and chemical resistance, as wel...veja mais Altor™ 205 is a 100% solids, UV resistant polyaspartic ester that maintains excellent cured film properties while increasing the pot life/working time when cured with an aliphatic polyisocyanate. It offers improved hardness and chemical resistance, as well as stain, scratch, and mar resistance. This product is recommended for concrete coatings, primed steel coatings, exterior railcar coatings, clean room coatings, institutional coatings, and windmill coatings. veja menos | |
| Ancamide® 220 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings. | Request Sample |
| ANCAMIDE® 220-IPA-73 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-IPA-73 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers, and coatings for concrete. | Request Sample |
| ANCAMIDE 221® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...veja mais ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. veja menos | Request Sample |
| ANCAMIDE 221-X70® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xyle...veja mais ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xylene. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. veja menos | Request Sample |
| ASCONIUM® 110 | GSI Exim America, Inc. | ASCONIUM® 110 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 110 is ideal for use as a corrosion inhibitor or hydrophobic agent and can be...veja mais ASCONIUM® 110 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 110 is ideal for use as a corrosion inhibitor or hydrophobic agent and can be used in any type of liquid metal coating for industrial or do-it-yourself use. For in-can corrosion protection, it can also be used in waterborne or solventborne systems, like strippers, glues, degreasers etc. veja menos | |
| ASCONIUM® 111 | GSI Exim America, Inc. | ASCONIUM® 111 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 111 can be used in any type of liquid metal coating for industrial, professio...veja mais ASCONIUM® 111 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 111 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. veja menos | |
| ASCONIUM® 112 | GSI Exim America, Inc. | ASCONIUM® 112 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 112 can be used in any type of liquid metal coating for industrial, professio...veja mais ASCONIUM® 112 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 112 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. veja menos | |
| ASCONIUM® 114 | GSI Exim America, Inc. | ASCONIUM® 114 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 114 can be used in any type of liquid metal coating for industrial, professio...veja mais ASCONIUM® 114 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 114 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. veja menos | |
| ASCONIUM® 140 | GSI Exim America, Inc. | ASCONIUM® 140 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 140 can be used in any type of liquid metal coating for industrial, professio...veja mais ASCONIUM® 140 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 140 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. veja menos | |
| ASCONIUM® 141 | GSI Exim America, Inc. | ASCONIUM® 141 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 141 can be used in any type of liquid metal coating for industrial, professio...veja mais ASCONIUM® 141 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 141 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. veja menos | |
| ASCONIUM® 142DA | GSI Exim America, Inc. | ASCONIUM® 142DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 142DA can be used in any type of liquid metal coating for industrial, profe...veja mais ASCONIUM® 142DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 142DA can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. veja menos | |
| ASCONIUM® 143 | GSI Exim America, Inc. | ASCONIUM® 143 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 143 can be used in any type of liquid metal coating for industrial, professio...veja mais ASCONIUM® 143 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 143 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. veja menos | |
| ASCONIUM® 144DA | GSI Exim America, Inc. | ASCONIUM® 144DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 144DA can be used in any type of liquid metal coating for industrial, profe...veja mais ASCONIUM® 144DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 144DA can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. veja menos | |
| ASCOTRAN® H30 | ASCOTEC | ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very se...veja mais ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). veja menos | Request Sample |
| B-Cat 0019 | FTC Korea Co.,Ltd | B-Cat 0019 has high temperature application and excellent humidity and detergent resistance. It is suitable for use in coil coatings, metal decorating, general industrial coating, electrostatic sprays, and electro coatings. | Request Sample |
| B-Cat 0023 | FTC Korea Co.,Ltd | B-Cat 0023 has high temperature application and excellent humidity and detergent resistance. It is suitable for use in coil coatings, metal decorating, general industrial coatings, electrostatic sprays, and electro coatings. | Request Sample |
| B-Cat 0025K | FTC Korea Co.,Ltd | B-Cat 0025K is has broad solubility and good exterior durability. It offers excellent viscosity stability and good flow and leveling. It is suitable for use in automotive topcoats, general industrial coatings, coil and can coatings, and paper coating. | Request Sample |
| B-Cat 0067 | FTC Korea Co.,Ltd | B-Cat 0067 has excellent solubility characteristics and is useful with polymeric melamines and phenolic resins. It has good water resistance. It is suitable for use in coil and can coatings, paper coatings, and general industrial coatings. | Request Sample |
| B-Cat 3025 | FTC Korea Co.,Ltd | B-Cat 3025 has an application temperature that is low. It has high gloss and excellent stability in waterborne and high solid systems. It is suitable for use in coil and can coatings, general industrial coatings, paper coatings, and printing inks. | Request Sample |
| B-Cat 3026 | FTC Korea Co.,Ltd | B-Cat 3026 is a catalyst with excellent stability in waterborne and high solid systems, high gloss, and has an application of low temperature. It is suitable for use in coil, can, and wood coatings, general industries, paper coating, and printing inks. | Request Sample |
| B-Cat 3028 | FTC Korea Co.,Ltd | B-Cat 3028 is a catalyst with excellent cure response and viscosity stability and application of low temperature. It is suitable for use in coil, can, and wood coatings, general industries, paper coatings, and printing inks. | Request Sample |
| B-Cat 4047 | FTC Korea Co.,Ltd | B-Cat 4047 has excellent water, salt spray, and detergent resistance. There is a low temperature reaction time and good gloss and gloss retention. It is suitable for use in coil coatings, metal decorating, and general industrial coatings. | Request Sample |
| B-Cat 4910 | FTC Korea Co.,Ltd | B-Cat 4910 has excellent adhesion and good humidity and salt spray resistance. It is suitable for use in coil and can coatings, electrostatic spraying, automotive primers, and electro coatings. | Request Sample |
| BENTONE® AD | Elementis | BENTONE® AD rheological additive is an easily dispersible, highly refined hectorite. It has been developed for water-borne automotive base-coats and general industrial systems. It is particularly suitable for metallic-pigmented paints. It provides a shear...veja mais BENTONE® AD rheological additive is an easily dispersible, highly refined hectorite. It has been developed for water-borne automotive base-coats and general industrial systems. It is particularly suitable for metallic-pigmented paints. It provides a shear-thinning viscosity, exceptional anti-settling, and sag control, across a wide range of application temperatures, without increasing the mid-shear-rate viscosity significantly. It imparts excellent spraying properties and aluminum pigment alignment. Its controlled particle size gives a smooth film appearance and does not impair gloss. veja menos | Request Sample |
| BENTONE® DY | Elementis | BENTONE® DY additive is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | Request Sample |
| Boltorn™ H2004 | Perstorp | Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Bolt...veja mais Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Boltorn™ H2004 improves ink transfer at high speeds in printing applications and is also used in UV-curable resins and industrial coatings. veja menos | |
| Brominated Epoxy Oligomers | Hainan Zhongxin Chemical Co., Ltd. | Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excelle...veja mais Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excellent thermal and light stability. veja menos | |
| Brominated Polystyrene | Hainan Zhongxin Chemical Co., Ltd. | Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(...veja mais Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(nylon) ect. veja menos | |
| BYK-1616 | BYK | BYK-1616 is a silicone-containing defoamer for aqueous printing inks and overprint varnishes, as well as aqueous wood and furniture coatings and general industrial coatings. | Request Sample |
| BYK-1641 | BYK | BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. | Request Sample |
| BYK-3540 | BYK | BYK-3540 is a silicone- and APEO-free leveling additive for automotive and industrial coatings, especially ED coatings, used to avoid surface defects with a simultaneous defoaming effect. | Request Sample |
| BYK-3568 | BYK | BYK-3568 is a surface-active additive to improve leveling and increase the surface energy of solvent-borne, 100 %, and UV systems, with a medium reduction in surface tension and a medium increase in surface slip. | Request Sample |
| CHEMIPOL SMART 100 | Chemipol | CHEMIPOL SMART 100 is not only a smart additive for painting and coating but also a stabilized aqueous suspension of ultrafine chemical compounds with excellent photocatalytic activity in the presence of natural or artificial UV light. This product is use...veja mais CHEMIPOL SMART 100 is not only a smart additive for painting and coating but also a stabilized aqueous suspension of ultrafine chemical compounds with excellent photocatalytic activity in the presence of natural or artificial UV light. This product is used for its self-cleaning effect on various building materials and other surfaces, textiles, gras, and ceramics, also is appropriate to be used as a remover of unpleasant odors and for mold and fungi prevention (due to its antiviral and antibacterial effect). The value of pH is 7.0-90. veja menos | Request Sample |
| CHEMIPOL SMART 200 | Chemipol | CHEMIPOL SMART 200 is a stabilized aqueous suspension of ultrafine chemical compounds with high photocatalytic activity in the presence of natural or artificial UV light. An obvious difference between SMART 100 and Smart 200 is the PH range, which can mee...veja mais CHEMIPOL SMART 200 is a stabilized aqueous suspension of ultrafine chemical compounds with high photocatalytic activity in the presence of natural or artificial UV light. An obvious difference between SMART 100 and Smart 200 is the PH range, which can meet customers' needs for different PH value ranges. This additive’s pH range is 6.0-8.0. veja menos | Request Sample |
| DAPRO® DF 2162 | Elementis | DAPRO® DF 2162 is designed to be used for waterborne systems. It imparts excellent foam control properties in architectural, industrial paints, and flexographic and gravure inks. | Request Sample |
| DAPRO® DF 303 | Elementis | DAPRO® DF 303 water-dispersible defoamer is effective in waterborne inks, adhesives, and industrial coatings and is particularly useful for low-sheen paints and coatings. | Request Sample |
| DAPRO® DF 31 | Elementis | DAPRO® DF 31 is a VOC-free, water-dispersible defoamer with excellent application properties. It is effective in high-quality quality waterborne inks, adhesives, and industrial coatings and is particularly useful for low-sheen paints and coatings. | Request Sample |
| DAPRO® DF 646 | Elementis | DAPRO® DF 646 is a very effective defoamer designed for use in waterborne wood, industrial coatings, and inks. It is easy to incorporate and highly efficient with minimal impact on gloss and appearance properties. | Request Sample |
| DAPRO® DF 675 | Elementis | DAPRO® DF 675 is especially useful in high-quality decorative and water-based urethane, alkyd, and acrylic industrial coatings. It is particularly useful in no-VOC decorative coatings for maintaining gloss and minimizing surface defects. | Request Sample |
| DAPRO® DF 696 | Elementis | DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696...veja mais DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696 works effectively in various water- based inks and coatings applications. It is easy to incorporate and disperses well into a wide range of formulations with excellent performance. veja menos | Request Sample |
| DAPRO® DF 911 | Elementis | DAPRO® DF 911 is a silicone-free defoamer based on a dispersion of olefinic solids. It imparts excellent foam control properties in architectural, industrial paints and coatings and inks. | Request Sample |
| DISPEX® Ultra PA 4590 | BASF Formulation Additives | DISPEX® Ultra PA 4590 is ideal for water-based industrial and decorative coatings where cost-effective performance is vital; suitable for making universal colorants with good compatibility. | |
| Docure KH-831 | Kukdo Chemical Co., Ltd. | Docure KH-831 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-831 has high gloss and good weathering resistance after curing. It is well suited for use in the production of floorings, industrial coatings and coatings with goo...veja mais Docure KH-831 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-831 has high gloss and good weathering resistance after curing. It is well suited for use in the production of floorings, industrial coatings and coatings with good weathering resistance. veja menos | |
| Domide GX-460 | Kukdo Chemical Co., Ltd. | Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for for...veja mais Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for marine and industrial purposes. veja menos | |
| Domide GX-483 | Kukdo Chemical Co., Ltd. | Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formula...veja mais Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for industrial and marine purposes. veja menos | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...veja mais DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. veja menos | |
| ECOPOLEDER-BT | Ecopol Tech | ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and ...veja mais ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and finishing applications, this dispersion significantly increases the abrasion resistance, conferring durability to the material. It has a high hardness, providing solid protection against wear. ECOPOLEDER-BT has specific binding properties with leather, ensuring strong and durable adhesion. In addition, the dispersion offers alkali resistance, extending its suitability for various conditions. With inherent waterproof properties, it further enhances the durability and utility of leather in various environments. In addition, ECOPOLEDER-BT is environmentally friendly, as more than 40% of its dry composition comes from organic sources. veja menos | |
| ECOPUD EW-10 | Ecopol Tech | ECOPUD EW-10 is an anionic polyurethane in aqueous dispersion. It can be directly applied to porous materials (wood, paper) using various techniques (brush, roller, spray) without prior drying, with absorption tests recommended. It can also be applied to ...veja mais ECOPUD EW-10 is an anionic polyurethane in aqueous dispersion. It can be directly applied to porous materials (wood, paper) using various techniques (brush, roller, spray) without prior drying, with absorption tests recommended. It can also be applied to previously dry surfaces. ECOPUD EW-10 is used in industries such as wood, graphic arts, lamination, footwear, textiles, paper, automotive, and construction. veja menos | |
| ECOPUD-42-45 | Ecopol Tech | ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formula...veja mais ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formulation of adhesives for furniture, automotive, footwear, textiles, leather, cork, and the construction industry. ECOPUD 42-45 is particularly well-suited for wet bonding of textile substrates due to the softness of the polymer film and its resistance to high temperatures. The product is free of NMP, NEP, and VOC’s and organo-TIN free. veja menos | |
| ECOPUD-54 | Ecopol Tech | ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction ...veja mais ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction industry. Due to its polymeric structure, ECOPUD-54 is particularly well-suited for applications involving plasticized PVC substrates. veja menos | |
| Epitex-C-9901-21-50 | US Polymers - Accurez LLC | Epitex-C-9901-21-50 is a siliconized epoxy ester supplied at 50 percent solids in a solvent combination of xylene and VM&P Naphtha. It is suggested for use in air-dry and forced dried industrial and industrial maintenance applications. Those include rust ...veja mais Epitex-C-9901-21-50 is a siliconized epoxy ester supplied at 50 percent solids in a solvent combination of xylene and VM&P Naphtha. It is suggested for use in air-dry and forced dried industrial and industrial maintenance applications. Those include rust inhibitive primers, zinc-rich primers, enamels and clear coats for optimum performance in a single package system. veja menos | Request Sample |
| Epokukdo KB-560 | Kukdo Chemical Co., Ltd. | Epokukdo KB-560 is a high-brominated flame-retardant Epoxy oligomer Resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrica...veja mais Epokukdo KB-560 is a high-brominated flame-retardant Epoxy oligomer Resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. veja menos | |
| Epokukdo KB-562P | Kukdo Chemical Co., Ltd. | Epokukdo KB-562P is a high-brominated flame-retardant epoxy oligomer Resin using TBBA and TBP asmajor raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrica...veja mais Epokukdo KB-562P is a high-brominated flame-retardant epoxy oligomer Resin using TBBA and TBP asmajor raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. veja menos | |
| Epokukdo KB-563P | Kukdo Chemical Co., Ltd. | Epokukdo KB-563P is a high-brominated flameretardant epoxy oligomer resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This epoxy oligomer resin shows excellent mechanical, electrica...veja mais Epokukdo KB-563P is a high-brominated flameretardant epoxy oligomer resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This epoxy oligomer resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. veja menos | |
| Epokukdo YU-300 | Kukdo Chemical Co., Ltd. | Epokukdo YU-300 is a epoxy modified polyol as Isocyanate curing type. Especially, it has a low temperature curing property and used in formulating for anti-corrosive paint. | |
| FAP-100 | FTC Korea Co.,Ltd | FAP-100 is an adhesion promoter for solvent borne systems. It has excellent adhesion properties when used with steel and plastic substrates. It works to improve corrosion protection and flexibility. It is suitable for use in can and coil coatings, industr...veja mais FAP-100 is an adhesion promoter for solvent borne systems. It has excellent adhesion properties when used with steel and plastic substrates. It works to improve corrosion protection and flexibility. It is suitable for use in can and coil coatings, industrial coatings, and silk screen inks. veja menos | Request Sample |
| FAP-200 | FTC Korea Co.,Ltd | FAP-200 has excellent adhesion to most metal substrates, improved flexibility, and improved corrosion resistance. It is suitable for use in coil and can coatings, automotive coatings, and industrial coatings. | Request Sample |
| FDA-163 | FTC Korea Co.,Ltd | FDA-163 has increased pigment concentration to reduce flooring problems and lower viscosity. It is suitable for use in coil coatings, general industrial coatings, and automotive coatings. | Request Sample |
| FDA-360 | FTC Korea Co.,Ltd | FDA-360 has increased pigment concentration, improved theological characteristics, and improved stability. It is suitable for use in coil coatings, general industrial coatings, and automotive coatings. | Request Sample |
| Ficonate-60X | FTC Korea Co.,Ltd | Ficonate-60X has good chemical and physical properties with good durability and weatherability. It is suitable for use as a hardener for automotive coatings and general industrial coatings. | Request Sample |
| Graph'Up W3 | CARBON WATERS | Graph'Up W3 is a ready-to-use additive boosting anti-corrosion, UV resistance, anti-scratch, and anti-clogging performance of waterbased formulations. | |
| Hydrite® R-A | Imerys Performance Additives | Hydrite®R-A is a fine particle size, acidic pH Hydrous kaolin with a medium binder demand suitable for solvent and water based coatings, inks, polymer & rubber applications. | |
| Hydrite™ SB 60 | Imerys Performance Additives | Hydrite™ SB 60 is an fine stain resistance additive specifically designed to provide optimum barrier performance in solvent & water based coating applications. | |
| Hydrite™ SB 60S | Imerys Performance Additives | Hydrite™ SB 60S is an ultra fine stain resistance additive specifically designed to provide optimum performance in water based barrier coating applications. | |
| LA-346 | FTC Korea Co.,Ltd | LA-346 has a reduction of the surface tension, improved substrate wetting and leveling, and does not increase surface slip. IT is suitable for use in aqueous coatings, printing inks, and general industrial coatings. | Request Sample |
| LA-45 | FTC Korea Co.,Ltd | LA-45 has excellent leveling and defoaming agent. It has good floor, gloss, and gloss retention. It is suitable for use in PCM coating, flooring coating, and general industrial coatings. | Request Sample |
| LA-460 | FTC Korea Co.,Ltd | LA-460 has excellent leveling agent properties as well as flow promotion. It has slip effects and anti-crater effects. It is suitable for use in PCM coatings, flooring coatings, and general industrial coatings. | Request Sample |
| LA-480 | FTC Korea Co.,Ltd | LA-480 has excellent leveling agent properties with improved surface quality and anti-crater effect. It is suitable for use in PCM coating, automotive coatings, and general industrial coatings. | Request Sample |
| LA-52 | FTC Korea Co.,Ltd | LA-52 has excellent compatibility in most binders and excellent leveling for coatings. It is suitable for use as a leveling additive for solvent-based coating and industrial coatings. | Request Sample |
| LUNA-FLEX MP15-H | DKSH | LUNA-FLEX MP15-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride...veja mais LUNA-FLEX MP15-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride and vinyl isobutyl ether copolymer. veja menos | Request Sample |
| M-P-A® 4020 BA | Elementis | O M-P-A® 4020 BA é um aditivo livre de umidade e livre de HAPS projetado para o controle altamente eficiente da sedimentação dos pigmentos em acabamentos industriais livres de HAPS | Request Sample |
| M-P-A® 4020 X | Elementis | O M-P-A® 4020 X é um agente anti-sedimentação despejável, de alta eficiência, livre de umidade e altamente estável o qual oferece a eficiência do aditivo M-P-A 1078 X de maneira de fácil manuseio. O uso deste produto como um aditivo em acabamentos industr...veja mais O M-P-A® 4020 X é um agente anti-sedimentação despejável, de alta eficiência, livre de umidade e altamente estável o qual oferece a eficiência do aditivo M-P-A 1078 X de maneira de fácil manuseio. O uso deste produto como um aditivo em acabamentos industriais resulta em maior controle da sedimentação dos pigmentos em níveis mais baixo de aditivo de que os agentes anti-sedimentação convencionais. Pode ser substituído diretamente em base sólida igual pelo M-P-A® 60X ou M-P-A® 2000X. veja menos | Request Sample |
| Microspersion® 400SM-40 | Micro Powders, Inc. | Microspersion® 400SM-40 is a nonionic water based dispersion of spherical submicron PTFE. | |
| NatureFine R331 | Micro Powders, Inc. | NatureFine R331 is a finely micronized rice bran wax for use in industrial coatings and agrochemical products. | |
| PAP-700 | FTC Korea Co.,Ltd | PAP-700 has excellent adhesion to plastic substrates and boiling water resistance. It has good chemical properties with good compatibility when used with other resins such as CAB and CPO. It is fast drying and suitable for use in general industrial coatin...veja mais PAP-700 has excellent adhesion to plastic substrates and boiling water resistance. It has good chemical properties with good compatibility when used with other resins such as CAB and CPO. It is fast drying and suitable for use in general industrial coatings and automotive coatings. veja menos | Request Sample |
| PolyGlide 1226XF | Micro Powders, Inc. | PolyGlide 1226XF is a highly engineered HDPE/ceramic composite for abrasion resistance and lubricity. | |
| Polytex™ E-100 | Estron Chemical, Inc. | Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. P...veja mais Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-100 has excellent compatibility with most commercial polymeric binders, pigments and plasticizers. veja menos | |
| Polytex™ E-75 | Estron Chemical, Inc. | Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a for...veja mais Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a formaldehyde-free resin alternative for nail lacquers. Polytex™ E-75 has compatibility with most commercial polymeric binders, pigments and plasticizers. veja menos | |
| Resiflow® 2N | Estron Chemical, Inc. | Resiflow® 2N is a carboxylic flow modifier used to eliminate surface imperfections such as pinholes, craters, fish-eyes, orange peel, edge-pull and sagging. Resiflow® 2N can be incorporated during pigment grinding or at letdown. When it is incorporated in...veja mais Resiflow® 2N is a carboxylic flow modifier used to eliminate surface imperfections such as pinholes, craters, fish-eyes, orange peel, edge-pull and sagging. Resiflow® 2N can be incorporated during pigment grinding or at letdown. When it is incorporated in the pigment dispersion prior to letdown, Resiflow® 2N may alleviate pigment floating and foam formation. The product is suitable for use in acrylic, alkyd, epoxy, polyester, and other industrial coatings systems. veja menos | |
| Resiflow® 3N | Estron Chemical, Inc. | Resiflow® 3N is a leveling agent for use in waterbased coatings. Resiflow® 3N is supplied as a 75% polymer solution in Glycol Ether EB (ethylene glycol monobutyl ether) and is made water soluble by neutralization with ammonia or a tertiary amine. Resiflow...veja mais Resiflow® 3N is a leveling agent for use in waterbased coatings. Resiflow® 3N is supplied as a 75% polymer solution in Glycol Ether EB (ethylene glycol monobutyl ether) and is made water soluble by neutralization with ammonia or a tertiary amine. Resiflow® 3N is beneficial in alleviating brush and roller marks, picture framing, edge pull and sagging, as well as promoting a uniform, level surface. veja menos | |
| Resiflow® L-210 | Estron Chemical, Inc. | Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and c...veja mais Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. veja menos | |
| Resiflow® PV-60 | Estron Chemical, Inc. | Resiflow®PV-60 is a general purpose flow control agent for general industrial powder coatings. The material is based on a liquid acrylic polymer that has been converted into a free flowing powder by adsorption onto silica-type filler. Surface defects such...veja mais Resiflow®PV-60 is a general purpose flow control agent for general industrial powder coatings. The material is based on a liquid acrylic polymer that has been converted into a free flowing powder by adsorption onto silica-type filler. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 1-2% of Resiflow® PV-60 into powder coating formulations. veja menos | |
| Resiflow® PV-88 | Estron Chemical, Inc. | Resiflow® PV-88 is widely known for its reliable performance as a flow control agent for general industrial powder coatings. It is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Re...veja mais Resiflow® PV-88 is widely known for its reliable performance as a flow control agent for general industrial powder coatings. It is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Resiflow ® PV-88 is well suited for a spectrum of common binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. veja menos | |
| Rhenogran® DOTG-70 | Rhein Chemie Rheinau GmbH | Rhenogran® DOTG-70 is 70 % N,N'-di-o-tolyl guanidine and 30% elastomer binder with dispersing agents appearing as white to grey, slightly red granules thermoplastic, fully compatible polymer binder allows quick absorption and excellent dispersion in the r...veja mais Rhenogran® DOTG-70 is 70 % N,N'-di-o-tolyl guanidine and 30% elastomer binder with dispersing agents appearing as white to grey, slightly red granules thermoplastic, fully compatible polymer binder allows quick absorption and excellent dispersion in the rubber. In this way, optimal activity of the effective substance is assured. This accelerator is used for the vulcanization of natural and synthetic rubbers requiring mechanical properties and aging resistance. Rhenogran® DOTG-70 finds application in roller coverings and cable sheathing. veja menos | |
| SLIP-AYD® SL 417 | Elementis | SLIP-AYD® SL 417 is a fine particle-size dispersion of a hard synthetic aliphatic wax prepared in isopropyl alcohol. | Request Sample |
| SLIP-AYD® SL 523 | Elementis | SLIP-AYD® SL 523 is a fine particle size dispersion of hard polymeric wax in isoproponal solvent. SLIP-AYD® SL 523 provides excellent slip and good block resistance. Solvent selection allows the product to be used in a wide range of aqueous and solvent ba...veja mais SLIP-AYD® SL 523 is a fine particle size dispersion of hard polymeric wax in isoproponal solvent. SLIP-AYD® SL 523 provides excellent slip and good block resistance. Solvent selection allows the product to be used in a wide range of aqueous and solvent based applications. It may be used in high gloss systems with very little effect on gloss. veja menos | Request Sample |
| SLIP-AYD® SL 551 | Elementis | SLIP-AYD® SL 551 is a high-melt polyethylene wax dispersion in Aromatic 100/n-Butanol solvents. SLIP-AYD® SL 551 provides exceptional resistance to block, and abrasion and improve slip properties. | Request Sample |
