| ACLYN 295-A | Univar Solutions | ACLYN 295-A is a zinc ionomer of an EAA copolymer, in powdered form, is neutralized to 98%. Zinc can provide corrosion resistance. Used as a pigment dispersing agent for masterbatch in polar resin systems due to enhanced compatability with the resin carri...veja mais ACLYN 295-A is a zinc ionomer of an EAA copolymer, in powdered form, is neutralized to 98%. Zinc can provide corrosion resistance. Used as a pigment dispersing agent for masterbatch in polar resin systems due to enhanced compatability with the resin carrier. veja menos | Request Sample |
| AquaBead® 270E | Micro Powders, Inc. | AquaBead® 270E is an anionic paraffin/polyethylene wax emulsion ideal for water repellency and weather/moisture resistance. | |
| AquaBead® 325E | Micro Powders, Inc. | AquaBead® 325E is a high solids anionic paraffin wax emulsion that provides water repellency and moisture barrier properties. | |
| AquaBead® 425E | Micro Powders, Inc. | AquaBead® 425E is an anionic carnauba wax emulsion that provides water beading with weather resistance, slip, block and mar resistance. | |
| AquaBead® 519 | Micro Powders, Inc. | AquaBead® 519 is a specially formulated wax composite that provides immediate water repellency and weather resistance. | |
| AquaBead® 525E | Micro Powders, Inc. | AquaBead® 525E is an anionic paraffin/carnauba wax emulsion ideal for water repellency and weather/moisture resistance. | |
| AquaBead® 525E-AM | Micro Powders, Inc. | AquaBead® 525E-AM is an anionic paraffin/carnauba wax emulsion ideal for water repellency and weather/moisture resistance. | |
| AquaBead® 916 | Micro Powders, Inc. | AquaBead® 916 is a specially formulated wax composite that provides immediate water beading and long-lasting water repellency and weather resistance. | |
| AQUACER 1013 | BYK | AQUACER 1013 is a VOC-free HDPE-based wax emulsion for improving the surface protection in aqueous coatings and printing inks as well as in aqueous care products and polishes. | Request Sample |
| AQUACER 1039 | BYK | AQUACER 1039 is a paraffin wax emulsion for improved surface characteristics in aqueous coatings and printing inks. | Request Sample |
| AQUACER 1061 | BYK | AQUACER 1061 is an emulsion of an ethylene-acrylic acid copolymer wax for improving the surface characteristics of paper. | Request Sample |
| AQUACER 1510 | BYK | AQUACER 1510 is a polypropylene wax emulsion for aqueous glass fiber sizings to improve the mechanical properties in glass fiber- reinforced PP compounds. | Request Sample |
| AQUACER® 1547 | BYK | Emulsão de cera para melhorar as propriedades da superfície dos revestimentos em lata, a base de água. Emulsão aniônica de cera de polietileno oxidado de alta densidade. | Request Sample |
| AQUACER 2500 | BYK | AQUACER 2500 is a wax emulsion on the basis of modified PE for aqueous foil and paper coatings to improve slip and abrasion resistance. | Request Sample |
| AQUACER 3500 | BYK | AQUACER 3500 is a cationic wax emulsion based on a modified polypropylene wax for formulating release agents for metal die casting. | Request Sample |
| AQUACER 494 | BYK | AQUACER 494 is an aqueous paraffin wax emulsion for care products and polishes. | Request Sample |
| AQUACER 497 | BYK | AQUACER 497 is a paraffin-based wax emulsion for aqueous coatings, printing inks as well as care products and polishes for improving water repellency and surface slip. | Request Sample |
| AQUACER 501 | BYK | AQUACER 501 is an HDPE-based wax emulsion for aqueous systems to improve surface protection. | Request Sample |
| AQUACER® 507 | BYK | Emulsões de cera para melhorar as propriedades de superfície de sistemas de tintas a base de água. Emulsão aniônica de cera de polietileno oxidado de alta densidade. | Request Sample |
| AQUACER® 513 | BYK | Emulsões da cera para melhorar a proteção de superfície de sistemas de tintas a base de água (aquosos) e de tintas de impressão. emulsão Não-Iónica baseada em uma cera oxidada de polietileno de alta densidade. | Request Sample |
| AQUACER® 526 | BYK | Emulsão da cera para revestimentos de efeito à base de água. Emulsão de uma cera de copolímero de Etileno-Vinil-Acetato (EVA), modificada anionicamente. | Request Sample |
| AQUACER 527 | BYK | AQUACER 527 is a wax emulsion based on a modified EVA copolymer wax to improve surface characteristics in aqueous coating systems and printing inks. | Request Sample |
| AQUACER 530 | BYK | AQUACER 530 is a wax emulsion for improved surface characteristics in aqueous printing inks, overprint varnishes, wood and furniture coatings as well as inkjet inks. | Request Sample |
| AQUACER® 531 | BYK | Emulsões de cera para melhorar as propriedades de superfície de sistemas de tintas industriais a base de água. Emulsão não aniônica de cera de polietileno oxidado de alta densidade. | Request Sample |
| AQUACER 532 | BYK | AQUACER 532 is an emulsion of a modified HD polyethylene wax for improved surface characteristics in aqueous coating systems. | Request Sample |
| AQUACER® 533 | BYK | Emulsão de cera para melhorar as propriedades de superfície de sistemas de tintas a base de água. Emulsão aniônica baseada em uma cera de parafina modificada. | Request Sample |
| AQUACER® 537 | BYK | Emulsões de cera para melhorar as propriedades de superfície de sistemas a base de água. Emulsão aniônica baseada em uma cera de parafina modificada. | Request Sample |
| AQUACER® 539 | BYK | Emulsões da cera para melhorar as propriedades de superfície de sistemas à base de água. emulsão não-Iónica baseada em uma cera de parafina modificada. | Request Sample |
| AQUACER 541 | BYK | AQUACER 541 is an aqueous emulsion of a montan ester wax for care products and polishes as well as for aqueous coating systems and leather coatings. | Request Sample |
| AQUACER® 552 | BYK | Emulsões de cera para melhorar a proteção de superfície de sistemas de pinturas aquosas e de tintas de impressão. Emulsão Não-Iónica baseada em uma cera oxidada de polietileno de alta densidade. | Request Sample |
| AQUACER 561 | BYK | AQUACER 561 is a beeswax-based wax emulsion to improve surface protection in aqueous care products and coating systems. | Request Sample |
| AQUACER 570 | Univar Solutions | AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original ...veja mais AQUACER 570 is a modified Ecolabel-compliant sunflower wax emulsion to improve the surface properties of care products and polishes. It seals and thereby covers any minor scratches on the surface that is to be treated, and restores the surface’s original color. It also improves the hydrophobicity and the oleophobicity of care products and polishes. This product is recommended for maintaining and protecting all types of surfaces, for leather, coated and uncoated surfaces. veja menos | Request Sample |
| AQUACER 571 | BYK | AQUACER 571 is a modified rice bran wax emulsion to improve the surface properties of care products, polishes, and aqueous coating systems. | Request Sample |
| AQUACER 581 | BYK | AQUACER 581 is a wax emulsion based on carnauba wax for aqueous paper coatings to improve surface slip, scratch-resistance, uniformity of printing ink acceptance, and ink setoff. Anti-caking additive for thermoplastics and hotmelts. | Request Sample |
| AQUACER 582 | BYK | AQUACER 582 is an emulsion based on a polyethylene wax for improving the surface properties of aqueous seed coatings. | Request Sample |
| AQUACER® 593 | BYK | Emulsão de cera para melhorar o anti deslizamento de sistemas de tintas a base de água e de tintas para impressão. Emulsão Não-Iónica de uma cera modificada com polipropileno. | Request Sample |
| AQUACER 597 | BYK | AQUACER 597 is a cationic wax emulsion based on a modified polypropylene wax for formulating release agents for metal die casting. | Request Sample |
| AQUACER® 840 | BYK | Emulsões de cera para melhora das propriedades de superfície de sistemas de pinturas a base de água. Emulsão catiônica de uma cera oxidada de polietileno de alta densidade. | Request Sample |
| AquaKlean 403 | Micro Powders, Inc. | AquaKlean 403 is an anionic/nonionic aqueous wax emulsion with a viscosity of 100 cPs specifically formulated for architectural interior paints and exterior stains, sealers, paints and coatings. It provides excellent scrub-ability and burnish resistance ...veja mais AquaKlean 403 is an anionic/nonionic aqueous wax emulsion with a viscosity of 100 cPs specifically formulated for architectural interior paints and exterior stains, sealers, paints and coatings. It provides excellent scrub-ability and burnish resistance as well as initial and long lasting water beadings, weather and moisture resistance. veja menos | |
| AQUAMAT® 208 | BYK | Dispersão aquosa de cera de alisamento para melhora das propriedades de superfície de sistemas de pinturas a base de água e de tintas de impressão . Dispersão de cera oxidada de polietileno de alta densidade. | Request Sample |
| AQUAMAT® 263 | BYK | Dispersão aquosa de cera de alisamento para melhora das propriedades de superfície de sistemas de pinturas a base de água e de tintas de impressão . Dispersão de cera oxidada de polietileno de alta densidade. | Request Sample |
| AquaMatte® 22 | Micro Powders, Inc. | AquaMatte® 22 is an ultrafine grade of micronized oxidized polyethylene for gloss reduction of paints and industrial coatings. Also useful as an additive in seed coatings. | |
| AquaMatte® 26HD | Micro Powders, Inc. | AquaMatte® 26HD is a very fine grade of densified oxidized polyethylene for gloss reduction and optimum stability in water based paints and coatings | |
| AquaMatte® 31 | Micro Powders, Inc. | AquaMatte® 31 is a fine micronized oxidized polyethylene for gloss reduction of paints and industrial coatings. Also useful as an additive in seed coatings. | |
| AquaPoly 215 | Micro Powders, Inc. | AquaPoly 215 is a micronized oxidized polyethylene for rub resistance and slip in aqueous systems | |
| AquaPoly 250 | Micro Powders, Inc. | AquaPoly 250 is a unique micronized polyethylene wax blend for maximum rub and scratch resistance with improved slip in aqueous systems. | |
| AquaPolyfluo 411 | Micro Powders, Inc. | AquaPolyfluo 411 is a unique micronized oxidized polyethylene/PTFE wax composite for improved scuff and mar resistance in aqueous systems. | |
| AquaPolysilk 19 | Micro Powders, Inc. | AquaPolysilk 19 is a unique micronized polyethylene wax composite for lubricity with abrasion and heat resistance in aqueous systems. | |
| Aquaslip™ 678 | Lubrizol Advanced Materials, Inc. | Aquaslip™ 678 is a wax emulsion for water based decorative and industrial coatings. The usage of Aquaslip 678 can improve the water beading properties of the coating. In addition Aquaslip 678 improves slip and anti-blocking in most aqueous points and coat...veja mais Aquaslip™ 678 is a wax emulsion for water based decorative and industrial coatings. The usage of Aquaslip 678 can improve the water beading properties of the coating. In addition Aquaslip 678 improves slip and anti-blocking in most aqueous points and coatings, with minimal effect on gloss or recoatability. veja menos | |
| Aquaslip™ 682 | Lubrizol Advanced Materials, Inc. | Aquaslip™ 682 is a fine particle size wax emulsion intended for surface protection in aqueous coatings and inks. Aquaslip 682 provides excellent scratch and abrasion resistance. | |
| AquaSuperslip 6550 | Micro Powders, Inc. | AquaSuperslip 6550 is a unique micronized polyethylene/amide wax composite that provides lubricity with a smooth surface feel in aqueous systems. | |
| AquaTex® 325 | Micro Powders, Inc. | AquaTex® 325 is a fine particle size grade of oxidized polyethylene for reducing gloss and adding surface texture. It has a max particle size of 44μm (325 mesh). | |
| AQUATIX® 8421 | BYK | Emulsão de cera que modifica reologia para melhorar a direção dos pigmentos de efeito em sistemas à base de água. Emulsão de uma cera modificada de copolímero de etileno-vinil-acetato (EVA). | Request Sample |
| Aquawax 214 | Micro Powders, Inc. | Aquawax 214 is an oxidized Fischer-Tropsch wax for rub resistance and improved surface slip. It has a maximum particle size of 31 μm. | |
| Aquawax 214VF | Micro Powders, Inc. | Aquawax 214VF is an oxidized Fischer-Tropsch wax for rub resistance and improved surface slip. It has a maximum particle size of 22 μm. | |
| ASTORLITE® J50 (4636A) | The International Group, Inc. (IGI Wax) | ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar / container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar / container candles can be made with a single filling with no top-off necessary. | |
| BARECO™ C-4040 | Univar Solutions | BARECO™ C-4040 is a microcrystalline wax that is petroleum-derived microcrystalline waxes consisting of complex mixtures of paraffinic, isoparaffinic, and naphthenic hydrocarbons. It refines and optimized for your specific requirements and are available i...veja mais BARECO™ C-4040 is a microcrystalline wax that is petroleum-derived microcrystalline waxes consisting of complex mixtures of paraffinic, isoparaffinic, and naphthenic hydrocarbons. It refines and optimized for your specific requirements and are available in grades ranging from hard, high melting crystalline waxes to soft, low melting flexible waxes. veja menos | Request Sample |
| Boltorn™ W3000 | Perstorp | Boltorn™ W3000 is a yellow, wax, mphiphilic dendritic polymer that contains non-ionic as well as unsaturated fatty acid chains. TBoltorn™ W3000 allows incorporation of water in solvent borne alkyd paint resulting in both cost and VOC reduction. Boltorn™ W...veja mais Boltorn™ W3000 is a yellow, wax, mphiphilic dendritic polymer that contains non-ionic as well as unsaturated fatty acid chains. TBoltorn™ W3000 allows incorporation of water in solvent borne alkyd paint resulting in both cost and VOC reduction. Boltorn™ W3000 modified paint possesses strong drying, hardness, gloss and chemical resistance. This product is used in alkyds, polyesters and pigment applications. veja menos | |
| Carnauba Wax T1 | Carnauba do Brasil Ltda. | Carnauba Wax T1 is a light yellow powder that originates from Olho's powder. It has an ash content of 0.05%, an acid value of 2 to 6 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic,...veja mais Carnauba Wax T1 is a light yellow powder that originates from Olho's powder. It has an ash content of 0.05%, an acid value of 2 to 6 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. veja menos | |
| Carnauba Wax T3 | Carnauba do Brasil Ltda. | Carnauba Wax T3 is a dark yellow powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 11 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, a...veja mais Carnauba Wax T3 is a dark yellow powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 11 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. veja menos | |
| Carnauba Wax T4 Centrifuged | Carnauba do Brasil Ltda. | Carnauba Wax T4 Centrifuged is a brown powder that originates from straw powder. It has an ash content of 0.5%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plas...veja mais Carnauba Wax T4 Centrifuged is a brown powder that originates from straw powder. It has an ash content of 0.5%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. veja menos | |
| Carnauba Wax T4 Filtered | Carnauba do Brasil Ltda. | Carnauba Wax T4 Filtered is a brown powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic...veja mais Carnauba Wax T4 Filtered is a brown powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. veja menos | |
| CERACOL 604 | BYK | CERACOL 604 is a wax dispersion based on a carnauba wax for solvent-borne can coatings, to increase the surface slip and improve the scratch resistance. | Request Sample |
| CERACOL 607 R | BYK | CERACOL 607 R is a wax dispersion based on a PTFE-modified polyethylene wax for solvent-borne can coatings and coil coatings. Increases surface hardness and surface slip. | Request Sample |
| CERACOL® 609 N | BYK | Dispersão de cera para melhora das propriedades de superfície de revestimentos em latas à base de solvente. Dispersão de lanolina modificada com cera. | Request Sample |
| CERACOL® 79 | BYK | Dispersão de cera para melhora das propriedades de superfície de revestimentos em latas. Dispersão de cera de carnaúba. | Request Sample |
| CERAFAK® 100 | BYK | Dispersão de cera para revestimentos de efeito, à base de solvente. Dispersão de cera de copolímero de Etileno-Vinil-Acetato (EVA). | Request Sample |
| CERAFAK® 103 | BYK | Dispersão de cera para revestimentos de efeito, à base de solvente. Dispersão de cera de copolímero de Etileno-Ácido-Acrílico (EAA). | Request Sample |
| CERAFAK® 106 | BYK | Dispersão de cera para revestimentos de efeito, à base de solvente. Dispersão de cera de copolímero de Etileno-Vinil-Acetato (EVA). | Request Sample |
| CERAFAK® 110 | BYK | Dispersão de cera para revestimentos de efeito à base de solvente. Dispersão de cera de copolímero de Etileno-Vinil-Acetato (EVA). | Request Sample |
| CERAFAK® 111 | BYK | Dispersão de cera inodora para revestimentos de efeito à base de solvente. Dispersão de cera de polietileno. | Request Sample |
| CERAFAK 117 | BYK | CERAFAK 117 is a wax dispersion to improve the water repellency of solvent-borne coating systems. | Request Sample |
| CERAFAK 127 N | BYK | CERAFAK 127 N is a dispersion of a Fischer Tropsch wax for solvent-borne coil coatings and architectural coatings to improve surface characteristics. | Request Sample |
| CERAFAK® 140N | BYK | Dspersão de Cera para melhorar as propriedades de superfície de revestimentos em lata, à base de solvente. Dispersão de cera de carnaúba. | Request Sample |
| CERAFLOUR 1050 | BYK | CERAFLOUR 1050 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to...veja mais CERAFLOUR 1050 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to typical PE/PTFE wax additives. veja menos | Request Sample |
| CERAFLOUR 1051 | BYK | CERAFLOUR 1051 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to...veja mais CERAFLOUR 1051 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to typical PE/PTFE wax additives. veja menos | Request Sample |
| CERAFLOUR 1052 | BYK | CERAFLOUR 1052 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to...veja mais CERAFLOUR 1052 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to typical PE/PTFE wax additives. veja menos | Request Sample |
| CERAFLOUR® 913 | BYK | Cera micronizada para propiciar características óticas e táteis perfeitas da superfície, de sistemas de revestimentos à base de água e à base de solvente. Ceras micronizada de polipropileno. | Request Sample |
| CERAFLOUR® 914 | BYK | Cera micronizada para características óticas e hápticas perfeitas de sistemas de revestimentos à base de água e à base de solvente. Ceras micronizadas de polipropileno. | Request Sample |
| CERAFLOUR® 915 | BYK | Cera micronizada para características óticas e hápticas perfeitas de sistemas de revestimentos à base de água e à base de solvente. Ceras micronizadas de polipropileno. | Request Sample |
| CERAFLOUR® 916 | BYK | Cera micronizada para características óticas e hápticas perfeitas de sistemas de revestimentos à base de água e à base de solvente. Mistura de cera micronizada modificada de polietileno de alta definição / polímero. | Request Sample |
| CERAFLOUR 927 N | BYK | CERAFLOUR 927 N is a micronized, modified polyethylene wax for improving mechanical properties and for matting aqueous systems. | Request Sample |
| CERAFLOUR 929 N | BYK | Esta é uma cera micronizada para melhora das propriedades mecânicas de sistemas à base de solvente e à base de água. | Request Sample |
| CERAFLOUR® 950 | BYK | Cera micronizada para melhorar as propriedades de superfície de revestimentos de verniz e de revestimentos em pó. Cera micronizada modificada de polietileno de alta definição. | Request Sample |
| CERAFLOUR® 950 For Powder | BYK | Aditivo de opacidade (matting) para revestimentos em pó. Cera micronizada do polietileno de alta definição. | Request Sample |
| CERAFLOUR 959 | BYK | CERAFLOUR 959 is a micronized PTFE polyethylene wax for powder coatings with a good price-performance ratio. | Request Sample |
| CERAFLOUR® 960 | BYK | O CERAFLOUR 960 é um aditivo para a melhoria da desgaseificação de revestimentos em pó com base em ß-hidroxialquilamidas. É composto de cera amida micronizada modificada. Este produto é eficaz em revestimentos em pó à base de epóxi, poliéster/epoxi, polié...veja mais O CERAFLOUR 960 é um aditivo para a melhoria da desgaseificação de revestimentos em pó com base em ß-hidroxialquilamidas. É composto de cera amida micronizada modificada. Este produto é eficaz em revestimentos em pó à base de epóxi, poliéster/epoxi, poliéster, poliuretano e acrílicos. O aditivo permite uma melhor desgaseificação de revestimentos em pó com endurecedores de ß-Hidroxialquilamida e melhora a umectação do pigmento, nivelamento e DOI. veja menos | Request Sample |
| CERAFLOUR 961 | BYK | CERAFLOUR 961 is a highly effective wax additive for improved degassing of powder coatings on porous substrates. | Request Sample |
| CERAFLOUR 962 | BYK | CERAFLOUR 962 is a highly effective wax additive for improved degassing of powder coatings on porous substrates. | Request Sample |
| CERAFLOUR® 965 | BYK | Aditivo eficiente para conseguir estruturas finas homogêneas. PTFE (politetrafluoretileno) micronizado. | Request Sample |
| CERAFLOUR® 970 | BYK | Cera micronizada para melhorar as propriedades de superfície de sistemas de tintas à base de solvente e revestimentos em pó. Cera micronizada de polipropileno. | Request Sample |
| CERAFLOUR® 970 For Powder | BYK | O CERAFLOUR® 970 For Powder é um aditivo de combinação para tintas em pó especialmente para revestimentos em pó alternativos TGIC. É composto de cera de polipropileno micronizada. Este produto é usado em revestimentos em pó à base de: poliéster/TGIC/Primi...veja mais O CERAFLOUR® 970 For Powder é um aditivo de combinação para tintas em pó especialmente para revestimentos em pó alternativos TGIC. É composto de cera de polipropileno micronizada. Este produto é usado em revestimentos em pó à base de: poliéster/TGIC/Primid/ligação em pó, poliéster/epóxi, poliuretano, acrilato e epóxi. veja menos | Request Sample |
| CERAFLOUR 988 | BYK | CERAFLOUR 988 is a micronized, amide-modified polyethylene wax for solvent-borne and solvent-free coating systems to improve the surface properties. | Request Sample |
| CERAFLOUR® 991 | BYK | Cera micronizada para melhorar as propriedades de superfície de sistemas de tintas à base de solvente e revestimentos em pó. Cera micronizada de polietileno. | Request Sample |
| CERAFLOUR® 991 For Powder | BYK | Cera de polietileno de alto valor para a redução de brilho em revestimentos em pó. Cera de polietileno micronizada. | Request Sample |
| CERAFLOUR® 993 | BYK | Cera micronizada para melhorar as propriedades de superfície de sistemas de tintas à base de solvente e revestimentos em pó. Cera micronizada de amida. | Request Sample |
| CERAFLOUR® 994 | BYK | Cera micronizada para melhorar as propriedades de superfície de sistemas de tintas à base de solvente e revestimentos em pó. Cera micronizada ultra-fina de amida. | Request Sample |
| CERAFLOUR® 994 For Powder | BYK | Aditivo para aumentar a eficiência na transferência de carga de revestimentos em pó. Cera ultra fina de amida micronizado. | Request Sample |
| CERAMAT® 248 | BYK | Dispersão da cera do alisamento para melhorar as propriedades da superfície de tintas decorativas à base de solvente. Dispersão de cera do polietileno. | Request Sample |
| CERAMAT 250 | BYK | CERAMAT 250 is an aromatic-free wax dispersion based on a polyethylene wax for solvent-borne coatings to improve surface protection. It has a soft-feel effect, matting effect and reduces settling. | Request Sample |
