| Baybond® PU 130 | Covestro | Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers u...veja mais Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide. Glass fiber sizes based on Baybond® PU 130 have excellent filmforming properties and adhesion. This product also exhibits very good colorfastness at high temperatures and is also highly resistant to hydrolysis. Full mechanical properties of Baybond® PU 130 are developed by post-crosslinking for 20 minutes @ 170C. As with any product, use of Baybond® PU 130 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. veja menos | |
| Sancure™ 20025F | Lubrizol Advanced Materials, Inc. | Sancure™ 20025F is a soft elastic aliphatic polyester urethane polymer dispersion. It has very low VOC content and contains no alkylphenol ethoxylates (APEO). It is designed to be used in textile and nonwoven coating formulations for polyester and nylon f...veja mais Sancure™ 20025F is a soft elastic aliphatic polyester urethane polymer dispersion. It has very low VOC content and contains no alkylphenol ethoxylates (APEO). It is designed to be used in textile and nonwoven coating formulations for polyester and nylon fabrics. It can be used as a component in tie coats and laminating adhesives. Sancure 20025F can be crosslinked using melamine formaldehyde resins, isocyanate crosslinkers, polyfunctional aziridines, or carbodiimides. veja menos |
