| Hydreau® 290-4156 | Polynt Composites | Hydreau® 290-4156 is a polyester dispersion designed for 2K coating systems with low isocyanate demand, for industrial applications and specialty coatings for various substrates, HAPs-free. | |
| Hydreau® 290-4254 | Polynt Composites | Hydreau® 290-4254 is a polyester dispersion that combines the high performance of polyester resin with near zero VOC capabilities of an emulsion, near zero VOC coatings, HAPs-free. | |
| Hydro-Rez™ 1000D A | Lawter | Hydro-Rez™ 1000D A is a water-based sulfo polyester polymer dispersion that can be used in combination with a higher Tg sulfo polyester polymer as a plasticizing resin or just as a lone resin. When it is used as a plasticizer, the polymer improves film f...veja mais Hydro-Rez™ 1000D A is a water-based sulfo polyester polymer dispersion that can be used in combination with a higher Tg sulfo polyester polymer as a plasticizing resin or just as a lone resin. When it is used as a plasticizer, the polymer improves film formation, adhesion and flexibility on non-absorbent substrates. The product is a stable dispersion with no surfactants or solvents. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The polymer has the benefit of giving off gloss, adhesion, transparency, fast drying speeds, low odor and scuff resistance on coatings, inks and primers. It is ideally suited for use in water-based primers and coatings or in water-based gravure and flexo inks. veja menos | |
| Hydro-Rez™ 1100D A | Lawter | Hydro-Rez™ 1100D A is a stable water-based sulfo polyester polymer dispersion with no surfactants or solvents. Since it also has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the pre...veja mais Hydro-Rez™ 1100D A is a stable water-based sulfo polyester polymer dispersion with no surfactants or solvents. Since it also has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The product gives off a low odor, gloss, fast drying speed, rub, transparency, adhesion and scuff resistance on coatings, primers and inks. Hydro-Rez™ 1100D A is suitable for use in water-based coatings and primers as well as water-based gravure and flexo inks. veja menos | |
| Hydro-Rez™ 1200D2 A | Lawter | Hydro-Rez™ 1200D2 A is a water-based sulfo polyester polymer dispersion with 30% resin solids with no amines or ammonia. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on th...veja mais Hydro-Rez™ 1200D2 A is a water-based sulfo polyester polymer dispersion with 30% resin solids with no amines or ammonia. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The product has the benefit of providing low odor, gloss, adhesion, transparency, fast drying speed and water, rub and scuff resistance on coatings, primers and inks. Hydro-Rez™ 1200D2 A is suitable for use in water-based coatings and primers and in water-based gravure and flexo inks. veja menos | |
| Hydro-Rez™ 1400D A | Lawter | Hydro-Rez™ 1400D A is a water-based sulfo polyester polymer dispersion which, when used as a plasticizer, helps film formation, adhesion and flexibility when used on non-absorbent substrates. It has no ammonia or amines for neutralization. This means that...veja mais Hydro-Rez™ 1400D A is a water-based sulfo polyester polymer dispersion which, when used as a plasticizer, helps film formation, adhesion and flexibility when used on non-absorbent substrates. It has no ammonia or amines for neutralization. This means that pH neutral inks formulated with the product's resins don't need pH adjustment on the press. Hydro-Rez™ 1400D A provides gloss, low odor, adhesion, fast drying speed, rub, transparency and scuff resistance to coatings, inks and primers. It is suitable for use in waster-based coatings and primers and in water-based gravure and flexo inks. veja menos | |
| Hydro-Rez™ 2140D A | Lawter | Hydro-Rez™ 2140D A is a water-based sulfo polyester polymer dispersion that is compatible with various inorganic and organic pigments which allow it to develop a complete color palette. Since it has no ammonia or amines for neutralization, pH neutral inks...veja mais Hydro-Rez™ 2140D A is a water-based sulfo polyester polymer dispersion that is compatible with various inorganic and organic pigments which allow it to develop a complete color palette. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with resins from the product line don't need pH adjustment on the press. The product gives off a fast drying speed, low odor, adhesion, gloss, rub, transparency and scuff resistance to coatings, inks and primers. Hydro-Rez™ 2140D A is suitable for use in water-based primers and coatings and in water-based gravure and flexo inks. veja menos | |
| Resiflow® L-64F MBE-1 | Estron Chemical, Inc. | Resiflow® L-64F MBE-1 is a 10% flow control masterbatch of Resiflow® L-64F in the epoxy resin Araldite® GT-7013 (Huntsman). This product has been designed for a balance of optimal flow and good clarity in polyester-epoxy hybrid and pure epoxy clearcoat fo...veja mais Resiflow® L-64F MBE-1 is a 10% flow control masterbatch of Resiflow® L-64F in the epoxy resin Araldite® GT-7013 (Huntsman). This product has been designed for a balance of optimal flow and good clarity in polyester-epoxy hybrid and pure epoxy clearcoat formulations. A key attribute of this flow control masterbatch is that the Resiflow® L-64F has already been highly dispersed into the epoxy resin and thus is very easily incorporated into the final formulation. veja menos | |
| Resiflow® L-64F MBP-10 | Estron Chemical, Inc. | Resiflow® L-64F MBP-10 is a 10% flow control masterbatch of Resiflow® L-64F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. A key attribute of this flow control masterbatch is that the Resiflow® L-64F has already been highly dispersed into t...veja mais Resiflow® L-64F MBP-10 is a 10% flow control masterbatch of Resiflow® L-64F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. A key attribute of this flow control masterbatch is that the Resiflow® L-64F has already been highly dispersed into the polyester resin and thus is very easily incorporated into the final formulation. This product has been designed for a balance of optimal flow and clarity in PE-TGIC, PE-PT910 and PE-Primid clearcoat formulations. veja menos | |
| Resiflow® L-65F MBH-2 | Estron Chemical, Inc. | Resiflow® L-65F MBH-2 is a 10% flow control masterbatch of Resiflow® L-65F in the hydroxyl polyester resin Rucote 106 (Bayer). Typical dosage is 7-12% based on the total formulation. This material has been designed for a balance of flow and clarity in pol...veja mais Resiflow® L-65F MBH-2 is a 10% flow control masterbatch of Resiflow® L-65F in the hydroxyl polyester resin Rucote 106 (Bayer). Typical dosage is 7-12% based on the total formulation. This material has been designed for a balance of flow and clarity in polyester-urethane clearcoat formulations. veja menos | |
| Resiflow® L-66F MBP-10 | Estron Chemical, Inc. | Resiflow® L-66F MBP-10 is a 10% flow control masterbatch of Resiflow® L-66F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. Typical dosage is 7-12% based on the total formulation. This masterbatch has been designed for flow and optimal clari...veja mais Resiflow® L-66F MBP-10 is a 10% flow control masterbatch of Resiflow® L-66F in Cytec’s Crylcoat 2437-0 carboxyl polyester resin for TGIC. Typical dosage is 7-12% based on the total formulation. This masterbatch has been designed for flow and optimal clarity in PE-TGIC clearcoat formulations. veja menos |
