| Anti-blocking agent SR | Yantai Suny Chem International Co., Ltd. | Anti-blocking agent SR is a neutral white waxy solid, which is produced through short-range molecular distillation and purification. It can be miscible with paraffin, dissolved in ethanol, chloroform, ether but not in water. | |
| BYK®-394 | BYK | agente liberador acrílico sem silicone com nivelamento de propriedades. Solução de um copolímero do poliacrilato. | Request Sample |
| BYK®-P 9051 | BYK | O BYK®-P 9051 é um aditivo de processamento para BMC com propriedades desmoldantes. É uma combinação de substâncias e de polímeros ativos de superfície. É um aditivo para facilitar o processamento do BMC/DMC. Ele também confere propriedades desmoldantes. ...veja mais O BYK®-P 9051 é um aditivo de processamento para BMC com propriedades desmoldantes. É uma combinação de substâncias e de polímeros ativos de superfície. É um aditivo para facilitar o processamento do BMC/DMC. Ele também confere propriedades desmoldantes. O produto não contribui para o embaçamento. Em BMC para refletores de farol, ele minimiza o embaçamento das peças moldadas. Devido à sua viscosidade mais baixa, o aditivo é mais fácil de processar do que o BYK-P 9050. veja menos | Request Sample |
| BYK-SILCLEAN 3701 | BYK | BYK-SILCLEAN 3701 is a silicone-containing surface additive for epoxy resin systems to improve cleanability (easy-to-clean effect). Permanent effect as a result of cross-linking in the system. | Request Sample |
| Combat® 10 Sf | Saint-Gobain Advanced Ceramics Boron Nitride | Combat® 10 Sf is a ready-to-use, water-based, completely inorganic coating for easy application. 10% BN content provides a thinner consistency coating, making this a ready-to-use formulation with no additional dilution required. This product is recommende...veja mais Combat® 10 Sf is a ready-to-use, water-based, completely inorganic coating for easy application. 10% BN content provides a thinner consistency coating, making this a ready-to-use formulation with no additional dilution required. This product is recommended for light metal processing, secondary aluminum manufacturing, and glass manufacturing. veja menos | |
| Combat® A | Saint-Gobain Advanced Ceramics Boron Nitride | Combat® A is a ready-to-use, water based, completely inorganic coating for easy application. A high-viscosity paste with a unique aluminum phorphate binder has higher solids than other coatings and must be diluted. This product offers a very strong bond w...veja mais Combat® A is a ready-to-use, water based, completely inorganic coating for easy application. A high-viscosity paste with a unique aluminum phorphate binder has higher solids than other coatings and must be diluted. This product offers a very strong bond with many different refractories. veja menos | |
| Combat® Green 10 SfG | Saint-Gobain Advanced Ceramics Boron Nitride | Combat® Green 10 SfG is a green-tinted ready-to-use, water-based, completely inorganic coating for easy application. 10% BN content provides a thinner consistency coating, making this a ready-to-use formulation with no additional dilution required. This p...veja mais Combat® Green 10 SfG is a green-tinted ready-to-use, water-based, completely inorganic coating for easy application. 10% BN content provides a thinner consistency coating, making this a ready-to-use formulation with no additional dilution required. This product is recommended for light metal processing, secondary aluminum manufacturing, and glass manufacturing. veja menos | |
| Combat® Green SfG | Saint-Gobain Advanced Ceramics Boron Nitride | Combat® Green SfG is a green-tinted ready-to-use, water-based, completely inorganic coating for easy application. A general-purpose thick concentrate coating comprised of 23% BN usually requires dilution with water to the desired consistency. It can also ...veja mais Combat® Green SfG is a green-tinted ready-to-use, water-based, completely inorganic coating for easy application. A general-purpose thick concentrate coating comprised of 23% BN usually requires dilution with water to the desired consistency. It can also be used as is depending upon the application. veja menos | |
| Combat® Sf | Saint-Gobain Advanced Ceramics Boron Nitride | Combat® Sf is a ready-to-use, water-based, completely inorganic coating for easy application. A general-purpose thick concentrate coating comprised of 23% BN usually requires dilution with water to the desired consistency. It can also be used as is depend...veja mais Combat® Sf is a ready-to-use, water-based, completely inorganic coating for easy application. A general-purpose thick concentrate coating comprised of 23% BN usually requires dilution with water to the desired consistency. It can also be used as is depending upon the application. veja menos | |
| Combat® V | Saint-Gobain Advanced Ceramics Boron Nitride | Combat® V is a ready-to-use, water based, completely inorganic coating for easy application. A thick composition that dries to a harder surface used in applications where a strong binder is needed such as coating moving parts in molten metal. It is excell...veja mais Combat® V is a ready-to-use, water based, completely inorganic coating for easy application. A thick composition that dries to a harder surface used in applications where a strong binder is needed such as coating moving parts in molten metal. It is excellent for coating graphite. veja menos | |
| Dynoadd® R-1001 | Dynoadd by Dynea | Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the clean...veja mais Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the cleaning of application equipment. Dynoadd® R-1001 prevents adhesion of most C84commonly used wood adhesive systems to production equipment greatly easing clean-up and reducing down-time. Dynoadd® R-1001 is effective in preventing the adhesion of formaldehyde resin based-, polyurethane based- and PVAc-based- adhesives to production equipment. veja menos | Request Sample |
| Escoat® P-20 Liquid | Mayzo, Inc. | Escoat® P-20 Liquid is a non-silicone product. Its high degree of purity, quality and tight melting point range offers superior properties and performance to critical users. Escoat® P-20 Liquid is used in adhesives and tapes. | |
| Escoat® P-20 Solids | Mayzo, Inc. | Escoat® P-20 Solids is a non-silicone product. Its high degree of purity, quality and tight melting point range offers superior properties and performance to critical users. Escoat® P-20 Solids is used in tapes and paper coatings. | |
| Escoat® WFX 120 Release Coat | Mayzo, Inc. | Escoat® WFX 120 Release Coat is a non-silicone, acrylic water based emulsion, which provides consistent release characteristics. It has a glossy coating, is inkjet and print receptive, and offers an easy peel release. Escoat® WFX 120 Release Coat is used ...veja mais Escoat® WFX 120 Release Coat is a non-silicone, acrylic water based emulsion, which provides consistent release characteristics. It has a glossy coating, is inkjet and print receptive, and offers an easy peel release. Escoat® WFX 120 Release Coat is used in adhesives, coatings, and tapes. veja menos | |
| Escoat® WPX 40 Release Coat | Mayzo, Inc. | Escoat® WPX 40 Release Coat is a non-silicone, carbohydrate polymer emulsion. It provides a moderate release performance. Escoat® WPX 40 Release Coat is used in coatings and adhesives. | |
| Fluoro P-77 (FEP Powder) | Shamrock Technologies, Inc. | Fluoro P-77 é uma etileno-propileno fluorado (FEP) com um tamanho médio de partícula de 1-3 mícrons. Ele é usado em aplicações como revestimentos de panelas para propriedades de liberação, oferecendo alto brilho e suavidade quando fundido. | |
| Hydrocer 145 (Amide Wax Dispersion) | Shamrock Technologies, Inc. | Hydrocer 145 é uma dispersão de cera sintética aquosa 50%. É utilizado em tecidos, papel, tinta e recipientes de metal. Hydrocer 145 proporciona propriedades de deslizamento e liberação. Ela é parte da série de dispersão Hydrocer da Shamrock. Hydrocer 145...veja mais Hydrocer 145 é uma dispersão de cera sintética aquosa 50%. É utilizado em tecidos, papel, tinta e recipientes de metal. Hydrocer 145 proporciona propriedades de deslizamento e liberação. Ela é parte da série de dispersão Hydrocer da Shamrock. Hydrocer 145 pode ser pós-adicionada após descanso com leve agitação. É pseudoplástico; portanto, a viscosidade é reduzida sob mistura de cisalhamento. Agitação excessiva, no entanto, pode fazer causar aprisionamento de ar e gerar espumas indesejáveis. Isto pode secar a cera e causa formação de crosta. Se a formar crosta, redisperse com mistura adicional. veja menos | |
| Lanco™ 1380 F | Lubrizol Advanced Materials, Inc. | Lanco™ 1380 F is a micronized wax with a high melting range and excellent toughness. In liquid coatings the use of Lanco 1380 F shows a high hardness in combination with matting efficiency and an especially good burnishing resistance. Because it contains ...veja mais Lanco™ 1380 F is a micronized wax with a high melting range and excellent toughness. In liquid coatings the use of Lanco 1380 F shows a high hardness in combination with matting efficiency and an especially good burnishing resistance. Because it contains no halogens, Lanco 1380 F can also be employed in areas where PTFE/PE waxes cannot be used. veja menos | |
| Lanco™ 1560 LF | Lubrizol Advanced Materials, Inc. | Lanco™ 1560 LF is a readily dispersible wax for waterborne coating and ink systems. | |
| Lanco™ Glidd 4832 | Lubrizol Advanced Materials, Inc. | Lanco™ Glidd 4832 is an easy-to-handle wax dispersion that provides very good stability in the final coating. Compared to most micronized products, Lanco™ Glidd 4832 has less influence on porosity, gloss and transparency. Lanco™ Glidd 4832 can be used in ...veja mais Lanco™ Glidd 4832 is an easy-to-handle wax dispersion that provides very good stability in the final coating. Compared to most micronized products, Lanco™ Glidd 4832 has less influence on porosity, gloss and transparency. Lanco™ Glidd 4832 can be used in can coatings and coil coatings. The use of Lanco™ Glidd 4832 leads to excellent scratch and abrasion resistance, significant COF reduction and good gloss retention. veja menos | |
| Lanco™ PP 1362 D | Lubrizol Advanced Materials, Inc. | Lanco™ PP 1362 D is a readily dispersible wax with a high melting range and excellent toughness. This additive shows a high hardness in combination with matting efficiency and an especially good resistance against burnishing. | |
| Lanco™ TF 1768 | Lubrizol Advanced Materials, Inc. | Lanco™ TF 1768 gives very good slip and abrasion resistance in liquid coating systems and powder coatings. Besides, the polymer combination leads to a very good metal marking resistance, while maintaining excellent compatibility and dispersability. | |
| Lanco™ TF 1778 | Lubrizol Advanced Materials, Inc. | Lanco™ TF 1778 gives very good slip and abrasion resistance in solvent based and powder coatings. The polymer combination is designed to give very low coefficients of friction, while maintaining excellent compatibility and dispersibility. | |
| Michem® Emulsion 52137 | Michelman | Michem® Emulsion 52137 is a nonionic polyethylene emulsion that provides lubricity and is effective as a high temperature mold release for metal dies. | |
| Michem® Emulsion 62125 | Michelman | Michem® Emulsion 62125 is a small particle size, #3 carnauba wax emulsion used as a release agent. | |
| NOFO 1032 | PCI Group, Inc. | NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperatu...veja mais NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperature range and will not cause surface defects associated with most silicone defoamers. veja menos | |
| OMBRELUB RA | Munzing Chemie | OMBRELUB RA is a yellow-brown liquid combination of liquid hydrocarbons and surface active compounds, anionic, Na/TEA salt. It shows a releasing effect in strippable coatings and protection varnishes based on emulsion polymers. At the same time it plastif...veja mais OMBRELUB RA is a yellow-brown liquid combination of liquid hydrocarbons and surface active compounds, anionic, Na/TEA salt. It shows a releasing effect in strippable coatings and protection varnishes based on emulsion polymers. At the same time it plastifies the coating without migration effects. Aqueous coatings which are formulated with OMBRELUB RA can be removed from all common substrates whether it be metal, glass or plastic without any problem. As OMBRELUB RA is nearly colourless it can be perfectly used in clear coats and white lacquers. Main applications include strippable coatings, transport protection coatings, hobby paints, and coatings for spray booths. veja menos | |
| PEL-SIL CL290 | Ele Corporation | PEL-SIL CL290 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL CE 390 has recoatability and low tendency to foam. It is good compatibility with ma...veja mais PEL-SIL CL290 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL CE 390 has recoatability and low tendency to foam. It is good compatibility with many resin systems. PEL-SIL CL290 is an excellent silicone-based additive for improving slip and mar esistance and reducing friction coefficient for solvent-borne, water-borne, and UV/EB cured coating systems. It can be used for coatings in industrial and auto, wood, and overprint vanishes and inks. veja menos | |
| ProHere® L 90018 | Michelman | ProHere® L 90018 is a high efficiency, anionic polyethylene wax emulsion that imparts lubricity, release, torque control and block resistance in meal coatings. | |
| RA-130W Release Coat | Mayzo, Inc. | RA-130W Release Coat is a non-silicone, acrylic water based emulsion that provides superior release characteristics. It has a glossy coating, low temperature curing, and offers an easy peel release. RA-130W Release Coat is used in solvent, adhesives, and ...veja mais RA-130W Release Coat is a non-silicone, acrylic water based emulsion that provides superior release characteristics. It has a glossy coating, low temperature curing, and offers an easy peel release. RA-130W Release Coat is used in solvent, adhesives, and coatings. veja menos | |
| RA-150W Release Coat | Mayzo, Inc. | RA-150W Release Coat is a high quality release coating. It provides excellent release, even in high humidity environments. RA-150W Release Coat is used in solvent acrylics, hot-melt adhesives, and print varnishes. | |
| S-400-N1 (EBS Wax Powder) | Shamrock Technologies, Inc. | O S-400 N1 é um pó de cera de amida para aplicações de película fina. Ele pode ser usado para reduzir o coeficiente de atrito e melhorar a liberação da superfície com efeito mínimo sobre o brilho. Este produto é usado em revestimentos de lata, bobina, pap...veja mais O S-400 N1 é um pó de cera de amida para aplicações de película fina. Ele pode ser usado para reduzir o coeficiente de atrito e melhorar a liberação da superfície com efeito mínimo sobre o brilho. Este produto é usado em revestimentos de lata, bobina, papel e industriais. O S-400 N1 pode ser usado com outros tipos de ceras para melhorar a resistência à abrasão ao mesmo tempo em que mantém o deslizamento. veja menos | |
| S-400-N5 (EBS Wax Powder) | Shamrock Technologies, Inc. | O S-400 N5 é um pó de cera de amida para aplicações de película fina. Ele pode ser usado para reduzir o coeficiente de atrito e melhorar a liberação da superfície com efeito mínimo sobre o brilho. Este produto é usado em revestimentos de lata, bobina, pap...veja mais O S-400 N5 é um pó de cera de amida para aplicações de película fina. Ele pode ser usado para reduzir o coeficiente de atrito e melhorar a liberação da superfície com efeito mínimo sobre o brilho. Este produto é usado em revestimentos de lata, bobina, papel e industriais. O S-400 N5 apresenta um tamanho de partícula controlado. O S-400 está disponível em uma variedade de tamanhos de partículas. veja menos | |
| S-400-SP5 (EBS Wax Powder) | Shamrock Technologies, Inc. | O S-400 SP5 é um pó de cera de amida para aplicações de película fina. Ele pode ser usado para reduzir o coeficiente de atrito e melhorar a liberação da superfície com efeito mínimo sobre o brilho. Este produto é usado em revestimentos de lata, bobina, pa...veja mais O S-400 SP5 é um pó de cera de amida para aplicações de película fina. Ele pode ser usado para reduzir o coeficiente de atrito e melhorar a liberação da superfície com efeito mínimo sobre o brilho. Este produto é usado em revestimentos de lata, bobina, papel e industriais. Ele pode ser facilmente disperso com mistura de alta velocidade. veja menos | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...veja mais SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. veja menos | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...veja mais SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. veja menos | |
| TEGO® Cure 100 | Evonik Operations GmbH, BL Coating Additives | TEGO® Cure 100 is a reactive ambient curing polysiloxane resin, pre-catalysed with amines, for the use as hardener. | Request Sample |
| TEGO® Rad 2650 | Evonik Operations GmbH, BL Coating Additives | Aditivo anti-aderente. | Request Sample |
| TEGO® Rad 2700 | Evonik Operations GmbH, BL Coating Additives | Aditivo anti-aderente. | Request Sample |
| TEGO® Rad 2800 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2800 is a new release additive for printing inks and varnishes. It has the highest release effect in the Rad portfolio, and therefore takes a further step in completing the range of radiation-curing glide and release additives. This product has ...veja mais TEGO® Rad 2800 is a new release additive for printing inks and varnishes. It has the highest release effect in the Rad portfolio, and therefore takes a further step in completing the range of radiation-curing glide and release additives. This product has a pronounced silicone character, combining strong hydrophobing properties with optimum system compatibility. veja menos | Request Sample |
| XIAMETER® OFX-0203 Fluid | Univar Solutions | XIAMETER® OFX-0203 Fluid is an alkylarylpolysiloxane fluid. It is compatible with most organic coatings and adhesive systems, and permits subsequent coating of fabricated parts without requiring unusual or extraordinary surface protection. | Request Sample |
