| Crystal™ SB | PQ Corporation | Crystal™ SB is a formulated soluble silicate used as a pH-stabilizing agent specifically developed for architectural coatings that stabilizes pH, while maintaining and/or improving paint properties and so providing formula cost savings benefits. | |
| Dynasylan® SILBOND® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 40 is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperatu...veja mais Dynasylan® Silbond® 40 is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. veja menos | |
| Dynasylan® SILBOND® 40-HF | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 40-HF, is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high tempe...veja mais Dynasylan® Silbond® 40-HF, is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. veja menos | |
| Dynasylan® SILBOND® 50 | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 50, is a polyethylsilicate with > 45 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temper...veja mais Dynasylan® Silbond® 50, is a polyethylsilicate with > 45 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. veja menos | |
| Dynasylan® SILBOND® H-6c | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® H-6C is a clear, low-viscosity pre-hydrolyzed ethyl polysilicate binder that has been designed for use in two part zinc-rich primers for corrosion protection. The silica content ranges from 17.5% to 19.0% (as SiO2). It can also be use...veja mais Dynasylan® SILBOND® H-6C is a clear, low-viscosity pre-hydrolyzed ethyl polysilicate binder that has been designed for use in two part zinc-rich primers for corrosion protection. The silica content ranges from 17.5% to 19.0% (as SiO2). It can also be used for investment casting applications. veja menos | |
| Dynasylan® SILBOND® HT-28A | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder with content ranging from 32.5 to 33.5% silica (as SiO2). The silica content is resultant of a mixture of silica derived from TEOS and other compone...veja mais Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder with content ranging from 32.5 to 33.5% silica (as SiO2). The silica content is resultant of a mixture of silica derived from TEOS and other components. This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher silica content as compared to a ethyl polysilicate binder. veja menos | |
| Dynasylan® SILBOND® HT-33 | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is f...veja mais Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher SiO2 content. veja menos | |
| Kasil® 1 | PQ Corporation | Kasil® 1 is a potassium silicate that provides good adhesion, good binding power, and corrosion inhibition. | |
| Kasil® 6 | PQ Corporation | Kasil® 6 is a potassium silicate that provides good adhesion, good binding power, and corrosion inhibition. | |
| MKC Silicate (Methyl Silicate Origomer) | DKSH | MKC Silicate is a self-cleaning additive for Paints (exterior deco, coil). It is made up of oligomers formed by the partial hydrolysis of tetramethoxysilane. By the hydrolysis of alcoxysilanes, silanol groups are generated and make the coating surface hyd...veja mais MKC Silicate is a self-cleaning additive for Paints (exterior deco, coil). It is made up of oligomers formed by the partial hydrolysis of tetramethoxysilane. By the hydrolysis of alcoxysilanes, silanol groups are generated and make the coating surface hydrophilic. In the rain, the hydrophilic surface enhances dirt removal with a self-cleaning effect. This product is available in Europe, Asia and North America. veja menos | Request Sample |
| PLUSTALC H15 | Elementis | PLUSTALC H15 is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. PLUSTALC grades have a low iron content. PLUSTALC is suitable for such applications where a higher brightness is required. | Request Sample |
| SIPERNAT® 820 A | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 820 A is a sodium aluminium silicate. It is produced by a special precipitation and drying process and is employed as a partial replacement for titanium dioxide. | Request Sample |
| SiSiB® PC5411 | SiSiB SILICONES | SiSiB® PC5411, also called Methyl silicate 51, is a colorless transparent liquid, containing 51% silica (SiO2) by mass. It is a hydrolyzed and oligomerized form of methyl silicate. It can be used as an inorganic binder for refractory fillers and pigments...veja mais SiSiB® PC5411, also called Methyl silicate 51, is a colorless transparent liquid, containing 51% silica (SiO2) by mass. It is a hydrolyzed and oligomerized form of methyl silicate. It can be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. veja menos | |
| SiSiB® PC5425 | SiSiB SILICONES | SiSiB® PC5425 is a transparent liquid containing 50% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is a hydrolyzed and oligomerized form of ethyl silicate. It can ...veja mais SiSiB® PC5425 is a transparent liquid containing 50% silica (SiO2) by mass, but in practice, in addition to chain condensates, it also contains branch-shaped and ring-shaped condensates. It is a hydrolyzed and oligomerized form of ethyl silicate. It can be used as a binder in zinc-rich (corrosion resistant) coating, as a starting material for sol-gel process, as a crosslinker component in cold curing silicone rubber systems, as a hardening component in dentistry for impression materials and as binder for embedding material, or as a binder in precision foundry industry veja menos | |
| SiSiB® PC5433 | SiSiB SILICONES | SiSiB® PC5433 is a colorless clear liquid. It is the isopropyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in z...veja mais SiSiB® PC5433 is a colorless clear liquid. It is the isopropyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. veja menos | |
| WACKER® TES 28 | Wacker Chemical Corporation | WACKER® SILIKATE TES 28 é tetraetoxissilano também conhecido como ortossilicato de tetraetilo. Algumas aplicações incluem revestimentos, revestimentos de metal, primers, revestimentos protetores e tintas ricas em zinco. | Request Sample |
| WACKER® TES 40 WN | Wacker Chemical Corporation | WACKER® SILIKATE TES 40 WN é um silicato de etilo que fornece cerca de 41% de dióxido de silício (sílica) após hidrólise completa. Algumas aplicações incluem revestimentos, revestimentos de metal, primers, revestimentos protetores e tintas ricas em zinco. | Request Sample |
