| ISONATE 240 | Univar Solutions | ISONATE 240 is a modified MDI compound produced by reacting high-purity diphenylmethane diisocyanate with a high molecular weight polyester polyol, resulting in a material with good storage stability down to 72°F. This medium-viscosity product may be form...veja mais ISONATE 240 is a modified MDI compound produced by reacting high-purity diphenylmethane diisocyanate with a high molecular weight polyester polyol, resulting in a material with good storage stability down to 72°F. This medium-viscosity product may be formulated with conventional polyether or polyester polyols and short chain diols or triols to yield high physical property elastomers or microcellular foams via the cast, low pressure or RIM-dispensing processes. veja menos | Request Sample |
| KOLDEX 50 | Univar Solutions | KOLDEX 50 is a pregelatinized, white dextrin that is highly soluble in cold water. It is widely used in a variety of adhesive applications meeting FDA requirements for food packaging adhesive. | Request Sample |
| KOLDEX 60 | Univar Solutions | KOLDEX 60 is a pregelatinized, white dextrin that is highly soluble in cold water. It is widely used in a variety of adhesive applications meeting FDA requirements for food packaging adhesive. | Request Sample |
| KRATON™ A1536 H | Univar Solutions | KRATON™ A1536 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 57%. It is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid ...veja mais KRATON™ A1536 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 57%. It is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid block suggests the use of this product in applications that must withstand weathering and high processing temperatures. veja menos | Request Sample |
| KRATON™ D0243 K | Univar Solutions | KRATON™ D0243 K is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesi...veja mais KRATON™ D0243 K is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings. veja menos | Request Sample |
| KRATON® D1101 AS Polymer | Univar Solutions | KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...veja mais KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. veja menos | Request Sample |
| KRATON® D1101 AT Polymer | Univar Solutions | KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...veja mais KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. veja menos | Request Sample |
| KRATON® D1101 AU Polymer | Univar Solutions | KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, ...veja mais KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. veja menos | Request Sample |
| KRATON® D1111 KT Polymer | Univar Solutions | KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosi...veja mais KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1111 KU Polymer | Univar Solutions | KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low vis...veja mais KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1113 PT Polymer | Univar Solutions | KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low visco...veja mais KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1114 PT Polymer | Univar Solutions | KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...veja mais KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1117 PT Polymer | Univar Solutions | KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...veja mais KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1117 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1118 ET Polymer | Univar Solutions | KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...veja mais KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1118 ETM Polymer | Univar Solutions | KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and...veja mais KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1119 PT Polymer | Univar Solutions | KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...veja mais KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1124 PT Polymer | Univar Solutions | KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity...veja mais KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1124 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1126 PT Polymer | Univar Solutions | KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity ...veja mais KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1126 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1155 ES Polymer | Univar Solutions | KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...veja mais KRATON® D1155 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1157 ES Polymer | Univar Solutions | KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...veja mais KRATON® D1157 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1157 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1161 KT Polymer | Univar Solutions | KRATON® D1161 KT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low ...veja mais KRATON® D1161 KT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1161 KU Polymer | Univar Solutions | KRATON® D1161 KU Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and ...veja mais KRATON® D1161 KU Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1161 PT Polymer | Univar Solutions | KRATON® D1161 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low v...veja mais KRATON® D1161 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1161 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1162 PT Polymer | Univar Solutions | KRATON® D1162 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...veja mais KRATON® D1162 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1162 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1163 PT Polymer | Univar Solutions | KRATON® D1163 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low v...veja mais KRATON® D1163 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1163 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1164 PT Polymer | Univar Solutions | KRATON® D1164 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...veja mais KRATON® D1164 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1164 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1165 PT Polymer | Univar Solutions | KRATON® D1165 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...veja mais KRATON® D1165 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1165 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1171 PT Polymer | Univar Solutions | KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness,...veja mais KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1171 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, and hot melt adhesives. veja menos | Request Sample |
| KRATON® D1184 AIM Polymer | Univar Solutions | KRATON® D1184 AIM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with calcium carbonate. This product is versatile with a combination of high strength, wide range...veja mais KRATON® D1184 AIM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with calcium carbonate. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1184 AT Polymer | Univar Solutions | KRATON® D1184 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...veja mais KRATON® D1184 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1191 ET Polymer | Univar Solutions | KRATON® D1191 ET Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...veja mais KRATON® D1191 ET Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1191 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. veja menos | Request Sample |
| KRATON® D1192 ET Polymer | Univar Solutions | KRATON® D1192 ET Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardn...veja mais KRATON® D1192 ET Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1192 ETM Polymer | Univar Solutions | KRATON® D1192 ETM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, an...veja mais KRATON® D1192 ETM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D1193 PT Polymer | Univar Solutions | KRATON® D1193 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low v...veja mais KRATON® D1193 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1193 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D4150 KT Polymer | Univar Solutions | KRATON® D4150 KT Polymeris a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and lo...veja mais KRATON® D4150 KT Polymeris a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4150 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® D4150 KU Polymer | Univar Solutions | KRATON® D4150 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, a...veja mais KRATON® D4150 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4150 KU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON™ DX405 J | Univar Solutions | KRATON™ DX405 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 24% mass. It is used for printing plates, UV cured, solvent borne and hot melt adhesive applications. | Request Sample |
| KRATON® FG1901 GT Polymer | Univar Solutions | KRATON® FG1901 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene ...veja mais KRATON® FG1901 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene vinyl alcohol, aluminum, steel, glass, and many other substrates. KRATON® FG1901 GT Polymer is used in adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON® FG1924 GT Polymer | Univar Solutions | KRATON® FG1924 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene ...veja mais KRATON® FG1924 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene vinyl alcohol, aluminum, steel, glass, and many other substrates. KRATON® FG1924 GT Polymer is used in adhesives, coatings, and sealants. veja menos | Request Sample |
| KRATON™ G1633 E | Univar Solutions | KRATON™ G1633 E is a clear linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 29.5% mass. It is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of ...veja mais KRATON™ G1633 E is a clear linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 29.5% mass. It is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid block suggests the use of this product in applications that must withstand weathering and high processing temperatures. veja menos | Request Sample |
| KRATON™ G1643 M | Univar Solutions | KRATON™ G1643 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 20%. It is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealant...veja mais KRATON™ G1643 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 20%. It is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens. veja menos | Request Sample |
| KRATON™ G1645 M | Univar Solutions | KRATON™ G1645 M is a linear triblock copolymer based on styrene and ethylene/butylene. It exhibits enhanced midblock for increased compatibility with polypropylene, good UV and thermal stability, and low melt flow designed for stability in blown film appl...veja mais KRATON™ G1645 M is a linear triblock copolymer based on styrene and ethylene/butylene. It exhibits enhanced midblock for increased compatibility with polypropylene, good UV and thermal stability, and low melt flow designed for stability in blown film applications. veja menos | Request Sample |
| KRATON™ G1650 M | Univar Solutions | KRATON™ G1650 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealant...veja mais KRATON™ G1650 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens. veja menos | Request Sample |
| KRATON™ G1651 H | Univar Solutions | KRATON™ G1651 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 31.5% mass. It is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of...veja mais KRATON™ G1651 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 31.5% mass. It is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid block suggests the use of this product in applications that must withstand weathering and high processing temperatures. veja menos | Request Sample |
| KRATON™ G1652 H | Univar Solutions | KRATON™ G1652 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 30% mass. It is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient...veja mais KRATON™ G1652 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 30% mass. It is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings. veja menos | Request Sample |
| KRATON™ G1657 M | Univar Solutions | KRATON™ G1657 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13% . It is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in f...veja mais KRATON™ G1657 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13% . It is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings. veja menos | Request Sample |
| KRATON™ G1701 M | Univar Solutions | KRATON™ G1701 M is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 37%. It is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear ap...veja mais KRATON™ G1701 M is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 37%. It is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings. veja menos | Request Sample |
| KRATON™ G1702 H | Univar Solutions | KRATON™ G1702 H is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 28%. It is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or t...veja mais KRATON™ G1702 H is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 28%. It is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. veja menos | Request Sample |
| KRATON™ MD1653 M | Univar Solutions | KRATON™ MD1653 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is used as a modifier of polymers, as an ingredient in formulating adhesives, sealants and coatings. | Request Sample |
| KRATON™ MD6684 GS-N | Univar Solutions | KRATON™ MD6684 GS-N is a clear linear triblock copolymer based on styrene and ethylene/butylene (S-E/B-S) with bound styrene of 32.9% mass and 1% maleic anhydride. It is used as a modifier of polymers and as an ingredient in formulating compounds for foot...veja mais KRATON™ MD6684 GS-N is a clear linear triblock copolymer based on styrene and ethylene/butylene (S-E/B-S) with bound styrene of 32.9% mass and 1% maleic anhydride. It is used as a modifier of polymers and as an ingredient in formulating compounds for footwear, adhesives, sealants and coatings. veja menos | Request Sample |
| KRATON™ RP6670 GT | Univar Solutions | KRATON™ RP6670 GT is a clear , linear triblock copolymer based on styrene and ethylene/butylene, with a maleic anhydride content of 1.5%. | Request Sample |
| KRISTALEX 1120 | Univar Solutions | KRISTALEX 1120 is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | Request Sample |
| KRISTALEX 3070 | Univar Solutions | KRISTALEX 3070 is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | Request Sample |
| KRISTALEX 3085 | Univar Solutions | KRISTALEX 3085 is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | Request Sample |
| KRISTALEX 3100 | Univar Solutions | KRISTALEX 3100 is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | Request Sample |
| KRISTALEX 3115LV | Univar Solutions | KRISTALEX 3115LV is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | Request Sample |
| KRISTALEX 5140 | Univar Solutions | KRISTALEX 5140 is a high softening point, low molecular weight resin produced by copolymerization of pure aromatic monomers. It is designed primarily for use as a modifier resin in high performance adhesives and coating compositions requiring water clear ...veja mais KRISTALEX 5140 is a high softening point, low molecular weight resin produced by copolymerization of pure aromatic monomers. It is designed primarily for use as a modifier resin in high performance adhesives and coating compositions requiring water clear color, heat stability, and resistance to oxidation and discoloration. . veja menos | Request Sample |
| LIPACRYL MB-3640 | Univar Solutions | LIPACRYL MB-3640 is an all-acrylic polymer designed for use in pigmented protective coatings to extend the life of new and existing roofs. It is ideal for use over asphaltic substrates, and applications with greater resistance to continuous ponded water o...veja mais LIPACRYL MB-3640 is an all-acrylic polymer designed for use in pigmented protective coatings to extend the life of new and existing roofs. It is ideal for use over asphaltic substrates, and applications with greater resistance to continuous ponded water on asphaltic roofs. These coatings represent a water-based alternative to solvent-based aluminized asphalt roof coating. For optimal water resistance, the product must be formulated with hydrophobic dispersants. veja menos | Request Sample |
| LUDOX® AM | Univar Solutions | LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Col...veja mais LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Colloidal Silica can be incorporated at neutral or slightly acid pH to yield stable formulations, making it suitable in many coating applications. veja menos | Request Sample |
| LUDOX® CL | Univar Solutions | LUDOX® CL Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size dispersed in a slightly acidic aqueous medium. Unlike most grades of colloidal silica, the silica particles are coated with an aluminum compound that impa...veja mais LUDOX® CL Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size dispersed in a slightly acidic aqueous medium. Unlike most grades of colloidal silica, the silica particles are coated with an aluminum compound that imparts a positive charge. LUDOX® CL Colloidal Silica may be used in various coating applications in which the formulation requires acidic pH or cationic polymers or surfactants. The positively charged particles may be used as surface treatments to paper and fibrous materials. LUDOX® CL Colloidal Silica can also be used as a high temperature binder. veja menos | Request Sample |
| LUDOX® CL-P | Univar Solutions | LUDOX® CL-P can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may hav...veja mais LUDOX® CL-P can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may have possible utility, LUDOX® CL-P and CL-X have been specially formulated to give superior performance and easy cleanup from coating machine surfaces. veja menos | Request Sample |
| LUDOX® CL-X | Univar Solutions | LUDOX® CL-X can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may hav...veja mais LUDOX® CL-X can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may have possible utility, LUDOX CL-P and CL-X have been specially formulated to give superior performance and easy cleanup from coating machine surfaces. veja menos | Request Sample |
| LUDOX® TMA | Univar Solutions | LUDOX® TMA Colloidal Silica contains synthetic amorphous silica of nominal 22 nanometer particle size. The aqueous colloidal dispersion contains 34% silica and is slightly acidic. LUDOX® TMA Colloidal Silica is used in the preparation of “hybrid” colloida...veja mais LUDOX® TMA Colloidal Silica contains synthetic amorphous silica of nominal 22 nanometer particle size. The aqueous colloidal dispersion contains 34% silica and is slightly acidic. LUDOX® TMA Colloidal Silica is used in the preparation of “hybrid” colloidal silica – ethyl silicate binders for precision investment casting. It may also be used in applications in which sodium or alkaline components are undesirable, such as catalysts or in formulations containing polar organic solvents. veja menos | Request Sample |
| LUMIFLON® FD1000 | Univar Solutions | LUMIFLON® FD1000 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is a polyol used in 2K polyurethane coatings and may be used as a blending resin in 1K systems. It has a low molecular weigh...veja mais LUMIFLON® FD1000 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is a polyol used in 2K polyurethane coatings and may be used as a blending resin in 1K systems. It has a low molecular weight combined with a high hydroxyl value for creating 2K waterbased polyurethane coatings with a high crosslink density. This waterborne polyol is classified as a dispersion as it is synthesized without emulsifier. This unique, emulsifier-free technology allows for the formulation of waterbased 2K polyurethane coatings with the same performance as traditional solventbased 2K coatings. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. veja menos | Request Sample |
| LUMIFLON® FE-4400 | Univar Solutions | LUMIFLON® FE-4400 is a water emulsion product that was developed to meet VOC and HAPS regulations on many solvents in the U. S. FE-4400 is hydroxyl functional, and can be crosslinked with water-dispersible polyisocyanates. Like other LUMIFLON® resins, FE-...veja mais LUMIFLON® FE-4400 is a water emulsion product that was developed to meet VOC and HAPS regulations on many solvents in the U. S. FE-4400 is hydroxyl functional, and can be crosslinked with water-dispersible polyisocyanates. Like other LUMIFLON® resins, FE-4400 is used to produce coatings with high gloss and excellent weatherability. veja menos | Request Sample |
| LUMIFLON® FE4300 | Univar Solutions | LUMIFLON® FE4300 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is used as a blending resin for coatings that need high performance at a low VOC. It has a high molecular weight for 1K coat...veja mais LUMIFLON® FE4300 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is used as a blending resin for coatings that need high performance at a low VOC. It has a high molecular weight for 1K coatings with excellent resistance properties. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. veja menos | Request Sample |
| LUMIFLON® LF-552 | Univar Solutions | LUMIFLON® LF-552 is a moderate molecular weight, moderate OH number resin dissolved in a blend of cyclohexanone and Aromatic 150 solvent. It is used in coil coatings where outstanding weatherability is required. This product is modified to improve pigment...veja mais LUMIFLON® LF-552 is a moderate molecular weight, moderate OH number resin dissolved in a blend of cyclohexanone and Aromatic 150 solvent. It is used in coil coatings where outstanding weatherability is required. This product is modified to improve pigment compatibility, resulting in crisp, clear colors in a broad range of colors. The major market for coil coatings made with LF-552 is in architectural coatings. veja menos | Request Sample |
| LUMIFLON® LF-600X | Univar Solutions | LUMIFLON® LF-600X is a moderate OH number resin. It is typically used to formulate coil coatings where flexibility and excellent weatherability are required. The major market where LF-600X finds application is the architectural market. However, LF-600X is...veja mais LUMIFLON® LF-600X is a moderate OH number resin. It is typically used to formulate coil coatings where flexibility and excellent weatherability are required. The major market where LF-600X finds application is the architectural market. However, LF-600X is also being used in ambient cure applications where high coating flexibility is required, for example, in coatings for plastics. veja menos | Request Sample |
| LUMIFLON® LF-710F | Univar Solutions | LUMIFLON® LF-710F is a fluorinated resin for highly durable coatings. It makes a coating that provides outstanding weathering resistance, as well as chemical resistance. LF-710F can be used to make either high or matte finish powder coatings. The resin ca...veja mais LUMIFLON® LF-710F is a fluorinated resin for highly durable coatings. It makes a coating that provides outstanding weathering resistance, as well as chemical resistance. LF-710F can be used to make either high or matte finish powder coatings. The resin can be crosslinked with standard aliphatic blocked isocyanates. Potential applications for coatings made with LF-710F include architectural (window frames and construction panels), heavy equipment coatings, and clear coats for automotive and aerospace applications. veja menos | Request Sample |
| LUMIFLON® LF-810 | Univar Solutions | LUMIFLON® LF-810 is a high molecular weight, low OH number fluoropolymer resin. It is meant to be formulated without crosslinkers, yielding coatings with extremely high weatherability and corrosion resistance. Potential applications for coatings made with...veja mais LUMIFLON® LF-810 is a high molecular weight, low OH number fluoropolymer resin. It is meant to be formulated without crosslinkers, yielding coatings with extremely high weatherability and corrosion resistance. Potential applications for coatings made with LF-810 include architectural, industrial maintenance, and bridge coatings. veja menos | Request Sample |
| LUMIFLON® LF200 | Univar Solutions | LUMIFLON® LF200 is a solventborne fluoroethylene vinyl ether resin designed for weather-resistant coatings. It has hydroxyl functionality and can be crosslinked with polyisocyanates. Coatings based on LF200 exhibit high gloss and excellent durability. Thi...veja mais LUMIFLON® LF200 is a solventborne fluoroethylene vinyl ether resin designed for weather-resistant coatings. It has hydroxyl functionality and can be crosslinked with polyisocyanates. Coatings based on LF200 exhibit high gloss and excellent durability. This product is a general purpose resin, used for heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for alternative energy applications. It is also available in a flake version called LF200F. This flake grade can be used with exempt solvents for low VOC formulations. veja menos | Request Sample |
| LUMIFLON® LF200F | Univar Solutions | LUMIFLON® LF200F is a fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has both moderate molecular weight and h...veja mais LUMIFLON® LF200F is a fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has both moderate molecular weight and hydroxyl value making it a versatile polyol for various applications. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. veja menos | Request Sample |
| LUMIFLON® LF910LM | Univar Solutions | LUMIFLON® LF910LM is a fluoroethylene vinyl ether solventborne polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It has low molecular weight coupled with a high hydroxyl value and is formulated into 2...veja mais LUMIFLON® LF910LM is a fluoroethylene vinyl ether solventborne polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It has low molecular weight coupled with a high hydroxyl value and is formulated into 2K crosslinkable coatings. Low molecular weight also allows for easy blending with other polyols. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. veja menos | Request Sample |
| LUMIFLON® LF916F | Univar Solutions | LUMIFLON® LF916F is fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has a lower molecular weight combined with...veja mais LUMIFLON® LF916F is fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has a lower molecular weight combined with a high hydroxyl value for formulating highly crosslinked 2K coatings with excellent performance properties. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. veja menos | Request Sample |
| MAINCOTE™ 4950 | Univar Solutions | MAINCOTE™ 4950 is an aqueous acrylic polymer capable of being formulated to a less or equal to 50 g/L volatile organic content (VOC) coating for light to medium duty maintenance and industrial applications. It offers excellent exterior durability, corrosi...veja mais MAINCOTE™ 4950 is an aqueous acrylic polymer capable of being formulated to a less or equal to 50 g/L volatile organic content (VOC) coating for light to medium duty maintenance and industrial applications. It offers excellent exterior durability, corrosion resistance, and ease of formulation with excellent paint stability. It also offers good architectural gloss and trim paint properties. veja menos | Request Sample |
| MAINCOTE™ AE-58 | Univar Solutions | MAINCOTE™ AE-58 is an acrylic emulsion which reacts with epoxies offering coatings with paint characteristics such as low VOC, low toxicity, and low odor and the performance profile of conventional solvent-borne 2-pack epoxy finishes. It is designed for g...veja mais MAINCOTE™ AE-58 is an acrylic emulsion which reacts with epoxies offering coatings with paint characteristics such as low VOC, low toxicity, and low odor and the performance profile of conventional solvent-borne 2-pack epoxy finishes. It is designed for general-purpose acrylic/epoxy paints which can be used on a variety of substrates such as exterior and interior metal and concrete. Property benefits include a long pot-life, low-temperature property response, and improved durability. veja menos | Request Sample |
| MAINCOTE™ HG-54D | Univar Solutions | MAINCOTE™ HG-54D is an acrylic resin setting a performance standard for waterborne maintenance coatings, which can be formulated into corrosion resistant primers along with full gloss, durable topcoats for commercial, institutional, and industrial mainten...veja mais MAINCOTE™ HG-54D is an acrylic resin setting a performance standard for waterborne maintenance coatings, which can be formulated into corrosion resistant primers along with full gloss, durable topcoats for commercial, institutional, and industrial maintenance markets. veja menos | Request Sample |
| MAINCOTE™ HG-56 | Univar Solutions | MAINCOTE™ HG-56 is an acrylic emulsion designed as a binder for maintenance coatings. While it is compositionally similar to MAINCOTE™ HG-54D, it offers improved reactive-pigment stability which achieve higher solids levels (50% vs. 41.5%), along with imp...veja mais MAINCOTE™ HG-56 is an acrylic emulsion designed as a binder for maintenance coatings. While it is compositionally similar to MAINCOTE™ HG-54D, it offers improved reactive-pigment stability which achieve higher solids levels (50% vs. 41.5%), along with improved stability. veja menos | Request Sample |
| MAINCOTE™ PR-71 | Univar Solutions | MAINCOTE™ PR-71 is an acrylic waterborne emulsion which allows the coating manufacturer to supply primers that not only adhere to difficult metallic substrates, but also give good corrosion resistance over carbon steel in a wide application environment. T...veja mais MAINCOTE™ PR-71 is an acrylic waterborne emulsion which allows the coating manufacturer to supply primers that not only adhere to difficult metallic substrates, but also give good corrosion resistance over carbon steel in a wide application environment. This resin's ability to be topcoated by most solvent-based coating systems makes it a very versatile water-based primer. veja menos | Request Sample |
| Methyl Formate | Univar Solutions | Methyl Formate is a water-clear, quickly evaporating liquid and dissolves slowly in water. This methyl ester of formic acid is a cure agent for foundry resin using the beta-set process. It also serves as a blowing agent for a variety of polymers, specific...veja mais Methyl Formate is a water-clear, quickly evaporating liquid and dissolves slowly in water. This methyl ester of formic acid is a cure agent for foundry resin using the beta-set process. It also serves as a blowing agent for a variety of polymers, specifically in polyurethane foams. It is also used as a chemical intermediate and solvent in the production of fine chemicals, fumigants, and insecticides. veja menos | Request Sample |
| N-(3-Aminopropyl)-imidazole, Lupragen® API | Univar Solutions | Catalizador seletivo para reações de resina epoxi e uretanos. Elemento fundamental para polímeros segmentados especiais (por exemplo, poliuretanos). N-(3-Aminopropyl)-imidazole é utilzado para sistemas epoxi de dois-componentes, para alteração de resina...veja mais Catalizador seletivo para reações de resina epoxi e uretanos. Elemento fundamental para polímeros segmentados especiais (por exemplo, poliuretanos). N-(3-Aminopropyl)-imidazole é utilzado para sistemas epoxi de dois-componentes, para alteração de resinas epoxi e para a preparação de poliuretanos. Na formação de uretanos ou uréias, N-(3-Aminopropyl)-imidazole é incorporado na estrutura do polímero e melhora as propriedades de aderência da resina. veja menos | Request Sample |
| NEOPRENE 571 | Univar Solutions | NEOPRENE 571 Liquid Dispersion contains a high modulus copolymer of chloroprene and sulfur made in an anionic colloidal system. | Request Sample |
| NEOPRENE 671-A | Univar Solutions | NEOPRENE 671-A Liquid Dispersion contains a high modulus polychloroprene homopolymer made in an anionic colloidal system. | Request Sample |
| NEOPRENE 750 | Univar Solutions | NEOPRENE 750 is an anionic aqueous colloidal dispersion of a crystallization-resistant Neoprene and isextremly stable with respect to shelf and heat aging. It immediately forms strong, highly extensible films when coagulated. . | Request Sample |
| NEOPRENE 842-A | Univar Solutions | NEOPRENE 842-A Liquid Dispersion contains a medium modulus polychloroprene homopolymer made in an anionic colloidal system. | Request Sample |
| NEOPRENE NPR 2008 | Univar Solutions | NEOPRENE NPR 2008 is a high viscosity Neoprene polymer designed specifically to provide improved solution characteristics when compared to Neoprene WHV which is intended primarily for rubber goods. Raw polymer stabilility is excellent. . | Request Sample |
| NEOPRENE WB | Univar Solutions | NEOPRENE WB is a non-staining polychloroprene that contains a high percentage of gel polymer. | Request Sample |
| NEOPRENE WHV | Univar Solutions | NEOPRENE WHV is a sulfur modified crystallization resistant Neoprene polymer stabilized with a thiuram disulfide. It is designed for non-staining and general-purpose use. | Request Sample |
| NEOPRENE WHV-100 | Univar Solutions | NEOPRENE WHV-100 is a sulfur modified crystallization resistant Neoprene polymer stabilized with a thiuram disulfide. It is designed for non-staining and general-purpose use. | Request Sample |
| NEOPRENE WRT | Univar Solutions | NEOPRENE WRT is non-staining crystallization-resistant copolymers of chloroprene and 2,3-dichlora-1,3-butadiene. . | Request Sample |
| NIKANE MS 5000 | Univar Solutions | NIKANE MS 5000 is a multifunctional solvent providing enhanced performance and appearance due to improved film formation for solvent-based systems. It has a medium evaporation rate with a wide solvency and compatibility range across various polymers, resi...veja mais NIKANE MS 5000 is a multifunctional solvent providing enhanced performance and appearance due to improved film formation for solvent-based systems. It has a medium evaporation rate with a wide solvency and compatibility range across various polymers, resins and materials. veja menos | Request Sample |
| NIPAR S-10 | Univar Solutions | NIPAR S-10 is a HAP-free, commercial-grade 1-nitropropane finds many benefits due to it's polarirty with a wide solvency range, low MIR value, low resistivity and displaces water which improves corrosion resistance. | Request Sample |
| N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine | Univar Solutions | Este é um elemento reticulador (cross-linker) para resinas epoxi. N,N'-Bis-(3-aminopropyl)-ethylene diamine é usado para revestimentos de resina epoxi de dois-componente, adesivos a base de epoxi e peças do plástico. Devido a sua alta funcionalidade alt...veja mais Este é um elemento reticulador (cross-linker) para resinas epoxi. N,N'-Bis-(3-aminopropyl)-ethylene diamine é usado para revestimentos de resina epoxi de dois-componente, adesivos a base de epoxi e peças do plástico. Devido a sua alta funcionalidade alta e baixo peso equivalente, N,N'-Bis-(3-aminopropyl)-ethylene diamine permite alta densidade reticulador (cross linking). veja menos | Request Sample |
| N,N-Diethylethanol-amine | Univar Solutions | Catalizador para a reação do uretano, agente neutralizante para resinas a base de água estabilizadas aniônicamente. N,N-Diethylethanolamine é bem adequado para a produção de poliuretanos e como catalizador para tintas de dois-componentes. N,N-Diethyleth...veja mais Catalizador para a reação do uretano, agente neutralizante para resinas a base de água estabilizadas aniônicamente. N,N-Diethylethanolamine é bem adequado para a produção de poliuretanos e como catalizador para tintas de dois-componentes. N,N-Diethylethanolamine é também utilizado como agente neutralizante em tintas baseadas em poliésteres a base de água, resinas alquídicas e acrílicas, e em poliuretanos. veja menos | Request Sample |
| OPTIGEL® CK | Univar Solutions | O OPTIGEL CK® é um produto de bentonite especialmente selecionado e ativado, tem alta capacidade de expandir em água e mostra um efeito espessante tixotrópico marcante. Ela impede a decantação de pigmentos pesados/extensores e incorpora um valor de rendim...veja mais O OPTIGEL CK® é um produto de bentonite especialmente selecionado e ativado, tem alta capacidade de expandir em água e mostra um efeito espessante tixotrópico marcante. Ela impede a decantação de pigmentos pesados/extensores e incorpora um valor de rendimento ao sistema. Este produto tem aplicações em áreas como tintas de emulsão e rebocos, revestimentos de imersão, primers, selantes e betumes, fritas cerâmicas e compostos, hastes de solda, lavagens de fundição, produtos de limpeza e polimentos, adesivos, emulsões betuminosas, sistemas redutíveis de água e emulsões de óleo em água. veja menos | Request Sample |
| OPTIGEL® WX | Univar Solutions | O OPTIGEL® WX, um produto de esmectite especialmente selecionado e ativado, tem uma elevada capacidade de expansão em água e mostra um efeito espessante tixotrópico acentuado. Este produto é estável em ácidos e bases diluídos e é particularmente eficaz em...veja mais O OPTIGEL® WX, um produto de esmectite especialmente selecionado e ativado, tem uma elevada capacidade de expansão em água e mostra um efeito espessante tixotrópico acentuado. Este produto é estável em ácidos e bases diluídos e é particularmente eficaz em sistemas ácidos, neutros e alcalinos. Este produto tem aplicações em tintas de emulsão, revestimentos de liberação, tintas de silicato, decapantes, tintas redutíveis água, produtos de limpeza líquidos, tintas, pastas de polimento e abrasivos e sub revestimentos automotivos. veja menos | Request Sample |
| OROTAN™ 731 DP | Univar Solutions | OROTAN™ 731 DP is a formaldhyde free, free flowing, spray dry powder dispersant providing good gloss and hiding power at economical use levels. When formulated with a high performance binder and other high-quality additives, it can provide greater corrosi...veja mais OROTAN™ 731 DP is a formaldhyde free, free flowing, spray dry powder dispersant providing good gloss and hiding power at economical use levels. When formulated with a high performance binder and other high-quality additives, it can provide greater corrosion resistance for flat primers, low VOC paints, interior and exterior flat, sheen, and semi-gloss paints, and glossy topcoats. It lends to improved dispersing, stability, and film properties in a broad array of coating systems. veja menos | Request Sample |
| OXFILM 351 | Univar Solutions | OXFILM 351 is a low odor, almost zero VOC coalescing agent. By definition, a non-VOC remains in the dried film where OXFILM 351 acts as a permanent plasticizer yielding a slightly softer film. To compensate, a slightly harder, higher Tg, resin is required...veja mais OXFILM 351 is a low odor, almost zero VOC coalescing agent. By definition, a non-VOC remains in the dried film where OXFILM 351 acts as a permanent plasticizer yielding a slightly softer film. To compensate, a slightly harder, higher Tg, resin is required to obtain the desired final film hardness. OXFILM 351 is not designed to be a drop-in replacement for traditional ester alcohol or glycol ether coalescents. It is intended for next generation low odor, low VOC coatings. Use of a slightly harder polymer is recommended to compensate for its permanence and plasticizing effect in the dried film. Low odor, extremely low 28 day emission results are achievable with OXFILM 351 when properly formulated. veja menos | Request Sample |
| Oxymer™ HD112 | Univar Solutions | Oxymer™ HD112 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 1000g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinker...veja mais Oxymer™ HD112 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 1000g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. veja menos | Request Sample |
| Oxymer™ HD56 | Univar Solutions | Oxymer™ HD56 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 2000 g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers...veja mais Oxymer™ HD56 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 2000 g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. veja menos | Request Sample |
