| ACRONAL® PRO 761 | BASF Dispersions & Resins | Acronal® PRO 761 is an acrylic latex polymer for corrosion-resistant primers for industrial coating applications. It is a medium viscosity, translucent emulsion that crosslinks upon curing to form clear, transparent, non-tacky films. Adding suitable corro...veja mais Acronal® PRO 761 is an acrylic latex polymer for corrosion-resistant primers for industrial coating applications. It is a medium viscosity, translucent emulsion that crosslinks upon curing to form clear, transparent, non-tacky films. Adding suitable corrosion protection pigments and extenders allows systems to be formulated with outstanding corrosion protection properties.This product is recommended for applications such as interior/exterior general industrial metal coating applications and industrial maintenance applications. veja menos | |
| ACRONAL® PRO 770 NA | BASF Dispersions & Resins | ACRONAL® PRO 770 NA is an acrylic emulsion polymer that can be used universally to formulate waterborne direct to metal (DTM) paints and anticorrosive primers. It shows excellent adhesion to metal substrates. ACRONALPRO 770 shows outstanding anti-corrosiv...veja mais ACRONAL® PRO 770 NA is an acrylic emulsion polymer that can be used universally to formulate waterborne direct to metal (DTM) paints and anticorrosive primers. It shows excellent adhesion to metal substrates. ACRONALPRO 770 shows outstanding anti-corrosive properties both in glossy DTM and matte monocoat/ primer applications without or with only limited addition of phosphate anticorrosive pigments. veja menos | |
| BASONAT® HB 275 B | BASF Dispersions & Resins | Basonat® HB 275 B is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is an approximately 75% solids solution in n-butyl acetate. It offers excellent weather and chemical resistance, excellent physical pro...veja mais Basonat® HB 275 B is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is an approximately 75% solids solution in n-butyl acetate. It offers excellent weather and chemical resistance, excellent physical properties, and non-yellowing. Basonat® HB 275 B is used to formulate lightfast and weather-resistant coatings. Aliphatic polyisocyanates are sometimes even used in primers for difficult substrates such as aluminum or plastics. veja menos | |
| JONCRYL® 1532 | BASF Dispersions & Resins | Joncryl® 1532 is a versatile polymer offering excellent adhesion to a wide variety of substrates including plastics, galvanized steel, previously painted or chalking surfaces. It can also be applied under a wide range of temperature and humidity condition...veja mais Joncryl® 1532 is a versatile polymer offering excellent adhesion to a wide variety of substrates including plastics, galvanized steel, previously painted or chalking surfaces. It can also be applied under a wide range of temperature and humidity conditions. This product exhibits low VOC capability. veja menos | |
| JONCRYL® 1540 | BASF Dispersions & Resins | Joncryl® 1540 is a hydroxy functional emulsion designed for thermoset coatings cured with melamines. It exhibits faster cure/lower temperature potential. The coatings offer good flexibility, chemical resistance and corrosion protection. This product is su...veja mais Joncryl® 1540 is a hydroxy functional emulsion designed for thermoset coatings cured with melamines. It exhibits faster cure/lower temperature potential. The coatings offer good flexibility, chemical resistance and corrosion protection. This product is suitable for metal and hardboard applications. veja menos | |
| JONCRYL® 500 | BASF Dispersions & Resins | Joncryl® 500 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with Joncryl® 500 features a low viscosity at high solids and excellent flow and leveling exhibiting good durability. High solids polyurethane c...veja mais Joncryl® 500 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with Joncryl® 500 features a low viscosity at high solids and excellent flow and leveling exhibiting good durability. High solids polyurethane coatings can be formulated below 2.6 pounds per gallon of Volatile Organic Compounds. Joncryl® 500 can also be used in melamine crosslinked coating systems. This acrylic is available in several alternative solvents. veja menos | |
| JONCRYL® 507 | BASF Dispersions & Resins | Joncryl® 507 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with Joncryl® 507 feature a low viscosity with high solids and excellent flow and leveling with acrylic durability. It is recommended for uretha...veja mais Joncryl® 507 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with Joncryl® 507 feature a low viscosity with high solids and excellent flow and leveling with acrylic durability. It is recommended for urethane coating applications in the industrial coatings market. Joncryl® 507 is an alternate solvent version of Joncryl® 500 for low odor and nonHAPS applications. veja menos | |
| JONCRYL® 508 | BASF Dispersions & Resins | Joncryl® 508 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with this clear liquid feature a low viscosity with high solids and excellent flow and leveling with acrylic durability. Joncryl® 508 is an alte...veja mais Joncryl® 508 is an innovative hydroxyl functional acrylic polymer for high solids systems. Coatings formulated with this clear liquid feature a low viscosity with high solids and excellent flow and leveling with acrylic durability. Joncryl® 508 is an alternate solvent version of Joncryl® 500 for low VOC applications. veja menos | |
| JONCRYL® 537 | BASF Dispersions & Resins | Joncryl® 537 is an acrylic emulsion for industrial coating applications. This translucent emulsion provides the fast dry characteristics of an emulsion, while providing the clarity and sandability necessary for applications such as interior wood sealers. | |
| JONCRYL® 550 | BASF Dispersions & Resins | Joncryl® 550 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially ...veja mais Joncryl® 550 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially available competitive acrylic polymers. It is a typical “workhorse”, conventional solid acrylic resin that is supplied in a 65/35 blend of PM-acetate/toluene. Joncryl® 550 differs from Joncryl® 587 in that it is slightly faster curing, slower drying, and does not have quite the outstanding UV durability properties of Joncryl® 587. veja menos | |
| JONCRYL® 551 | BASF Dispersions & Resins | Joncryl® 551 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially ...veja mais Joncryl® 551 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially available competitive acrylic polymers. It is a typical “workhorse”, conventional solid acrylic resin. Joncryl® 551 differs from Joncryl® 587 in that it is slightly faster curing, slower drying, and does not have quite the outstanding UV durability properties of Joncryl® 587. veja menos | |
| JONCRYL® 587-AC | BASF Dispersions & Resins | Joncryl® 587-AC is a conventional solids, acrylic polyol for polyurethane coating applications. This clear liquid is recommended for interior/exterior automotive OEM and refinish coating applications, interior/exterior general metal coating applications, ...veja mais Joncryl® 587-AC is a conventional solids, acrylic polyol for polyurethane coating applications. This clear liquid is recommended for interior/exterior automotive OEM and refinish coating applications, interior/exterior general metal coating applications, interior/exterior plastic component coating applications and exterior wood coatings for furniture applications veja menos | |
| JONCRYL® 901 | BASF Dispersions & Resins | Joncryl® 901 is an innovative acrylic oligomer for high solids polyurethane coatings. High solids coatings containing as low as 2.8 pounds per gallon of VOC (Volatile Organic Compounds) can be formulated to spray by conventional or airless equipment. Jon...veja mais Joncryl® 901 is an innovative acrylic oligomer for high solids polyurethane coatings. High solids coatings containing as low as 2.8 pounds per gallon of VOC (Volatile Organic Compounds) can be formulated to spray by conventional or airless equipment. Joncryl® 901 displays excellent viscosity characteristics without the addition of low molecular weight reactive diluents. Paints formulated with should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. veja menos | |
| JONCRYL® 903 | BASF Dispersions & Resins | Joncryl® 903 is an acrylic polyol for high solids urethane coating applications. | |
| JONCRYL® 909 | BASF Dispersions & Resins | Joncryl® 909 is an innovative acrylic oligomer for high solids urethane coatings. This product employs a new technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethan...veja mais Joncryl® 909 is an innovative acrylic oligomer for high solids urethane coatings. This product employs a new technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coatings with quick dry times, hardness development, and practical pot life. High solids coatings for maintenance, transportation, automotive refinish, and other applications can be formulated from 2.8 to 3.5 pounds per gallon of VOC. Joncryl® 909 is supplied in n-Butyl Acetate for use in areas where odor is a concern. This product should be considered as a candidate for high performance, maintenance, automotive refinish, and transportation coatings as a replacement for conventional solids urethane finishes. veja menos | |
| JONCRYL® 910 | BASF Dispersions & Resins | Joncryl® 910 is a gloss-retentive acrylic polyol designed for higher solids polyurethane coatings. This product employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate f...veja mais Joncryl® 910 is a gloss-retentive acrylic polyol designed for higher solids polyurethane coatings. This product employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying polyurethane coatings with good pot life and excellent dry time characteristics for maintenance, transportation, and other applications, at VOC levels as low as 3.2 pounds per gallon without exempt solvents. veja menos | |
| JONCRYL® 915 | BASF Dispersions & Resins | Joncryl® 915 is an innovative acrylic oligomer for high solids polyurethane coatings featuring fast cure times. The equivalent weight of Joncryl® 915 has been maximized to provide the lowest isocyanate demand possible while maintaining good crosslink dens...veja mais Joncryl® 915 is an innovative acrylic oligomer for high solids polyurethane coatings featuring fast cure times. The equivalent weight of Joncryl® 915 has been maximized to provide the lowest isocyanate demand possible while maintaining good crosslink density. High solids coatings that are as low as 2.8 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. Joncryl® 915 displays outstanding viscosity characteristics without the addition of low molecular weight reactive diluents. This product should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids polyurethane finishes. veja menos | |
| JONCRYL® 920 | BASF Dispersions & Resins | Joncryl® 920 is an innovative acrylic oligomer for high solids polyurethane coatings, which features fast cure with a practical pot life. High solids coatings that are as low as 2.3 pounds per gallon of VOC can be formulated to spray by conventional or ai...veja mais Joncryl® 920 is an innovative acrylic oligomer for high solids polyurethane coatings, which features fast cure with a practical pot life. High solids coatings that are as low as 2.3 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. It displays outstanding viscosity characteristics without the addition of low molecular weight reactive diluents. Joncryl® 920 should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. veja menos | |
| JONCRYL® 922 | BASF Dispersions & Resins | Joncryl® 922 is an innovative acrylic oligomer for high solids polyurethane coatings. It employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coa...veja mais Joncryl® 922 is an innovative acrylic oligomer for high solids polyurethane coatings. It employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying urethane coatings with quick dry times and a practical pot life. High solids coatings for maintenance, transportation, and other applications can be formulated from 2.3 to 3.8 pounds per gallon of VOC. Joncryl® 922 is supplied in n-Butyl Acetate for use in areas where odor is a concern. This product is also available in MAK as Joncryl® 920. It should be considered as a candidate for high performance, maintenance, and transportation coatings as a replacement for conventional solids urethane finishes. veja menos | |
| JONCRYL® 924 | BASF Dispersions & Resins | Joncryl® 924 is an innovative acrylic oligomer for high solids urethane coatings, which features fast cure with a practical pot life. It is supplied in the exempt solvent PCBTF for very low to zero VOC applications, although most formulations will contain...veja mais Joncryl® 924 is an innovative acrylic oligomer for high solids urethane coatings, which features fast cure with a practical pot life. It is supplied in the exempt solvent PCBTF for very low to zero VOC applications, although most formulations will contain 1.0 – 2.5 lbs/gal of VOC content. It possesses outstanding exterior durability and outstanding gloss, flow, leveling, and application properties. veja menos | |
| JONCRYL® 934 | BASF Dispersions & Resins | Joncryl® 934 is a high equivalent weight polyol designed for low isocyanate demand, 2-component polyurethane coatings. High solids coatings that are as low as 2.9 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. Jo...veja mais Joncryl® 934 is a high equivalent weight polyol designed for low isocyanate demand, 2-component polyurethane coatings. High solids coatings that are as low as 2.9 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. Joncryl® 934 displays good cure rate and pot life. This product should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. veja menos | |
| JONCRYL® 935 | BASF Dispersions & Resins | Joncryl® 935 is a high performance polyol for polyurethane coatings suitable for automotive refinish and industrial applications. It offers excellent exterior durability with good chemical resistance and is available in PCBTF as Joncryl® 939. | |
| JONCRYL® 945 | BASF Dispersions & Resins | Joncryl® 945 is a fast curing acrylic polyol designed for high solids polyurethane coatings. It displays excellent gloss and gloss retention as well as good chemical resistance. Joncryl® 945 should be considered as a candidate for high performance mainten...veja mais Joncryl® 945 is a fast curing acrylic polyol designed for high solids polyurethane coatings. It displays excellent gloss and gloss retention as well as good chemical resistance. Joncryl® 945 should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. veja menos | |
| JONCRYL® RPD 950-AC/P | BASF Dispersions & Resins | Joncryl® RPD 950-AC/P is a specialty acrylic polyol with rapid property development for solvent-borne 2K polyurethane systems in automotive refinish and general industrial applications. This polyol, when cross-linked with either Basonat® HI 100 or HI 190 ...veja mais Joncryl® RPD 950-AC/P is a specialty acrylic polyol with rapid property development for solvent-borne 2K polyurethane systems in automotive refinish and general industrial applications. This polyol, when cross-linked with either Basonat® HI 100 or HI 190 aliphatic trimer isocyanate, provides fast cure with early hardness development and a long pot life. Joncryl® RPD 950-AC/P offers early buffability for automotive refinish applications. veja menos | |
| Water-based 2K High-gloss PUR for DTM and Topcoat Applications (With End-of-Pot-Life Indication) | BASF Dispersions & Resins | High-performance coatings with low VOC content are needed to meet the market demand and government regulations. BASF has developed a low VOC, high-performance, water-based 2K polyurethane coating system for direct-to-metal and topcoat applications. | |
| Water-Based Single Component High Gloss Acrylic for DTM and Topcoat Applications | BASF Dispersions & Resins | High performance coatings with low VOC content are needed to meet the market demand and government regulation. BASF has developed a low VOC, high performance, water-based coating system for direct to metal and topcoat applications. |
