| ADDITOL® XL 122 | Allnex | Aditivo de tinta para aumentar a resistência à deterioração e o deslisamento, e para melhorar a efusão e o nivelamento em tintas de secagem à ar e em estufa. | Request Sample |
| ADDITOL® XW 329 | Allnex | Aditivo de tinta para aumentar a resistência à deterioração e o deslizamento e nivelando, particularmente de tintas solúveis em água. | Request Sample |
| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| AQUACER® 513 | BYK | Emulsões da cera para melhorar a proteção de superfície de sistemas de tintas a base de água (aquosos) e de tintas de impressão. emulsão Não-Iónica baseada em uma cera oxidada de polietileno de alta densidade. | |
| AQUACER® 552 | BYK | Emulsões de cera para melhorar a proteção de superfície de sistemas de pinturas aquosas e de tintas de impressão. Emulsão Não-Iónica baseada em uma cera oxidada de polietileno de alta densidade. | |
| AquaFLON® 178G (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 178G é uma dispersão aquosa estável de uma mistura de 50% de polietileno de peso molecular médio (PE) e politetrafluoretileno (PTFE). A mistura única de PE e PTFE oferece deslizamento reforçado com resistência à abrasão ideal. O tamanho de part...veja mais AquaFLON® 178G é uma dispersão aquosa estável de uma mistura de 50% de polietileno de peso molecular médio (PE) e politetrafluoretileno (PTFE). A mistura única de PE e PTFE oferece deslizamento reforçado com resistência à abrasão ideal. O tamanho de partícula maior maximiza o desempenho e reduz o custo da formulação quando comparado com as micro dispersões e emulsões. AquaFLON® 178G tem um efeito moderado sobre o brilho e clareza, o que é desejável para sistemas de alto brilho. AquaFLON® 178G também maximiza a carga ativa com fácil manuseamento, uma excelente estabilidade e dispersabilidade. veja menos | |
| AquaFLON® 50 (PTFE Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 50 é uma dispersão de 50% de politetrafluoretileno (PTFE) estável em água. Em revestimentos à base de água e lubrificantes, que oferece excelentes propriedades de lubrificação e alto deslizamento e resistência à abrasão. Suas partículas de dimen...veja mais AquaFLON® 50 é uma dispersão de 50% de politetrafluoretileno (PTFE) estável em água. Em revestimentos à base de água e lubrificantes, que oferece excelentes propriedades de lubrificação e alto deslizamento e resistência à abrasão. Suas partículas de dimensão pequenas e uniformes (1-3 mícrons), dispersíveis em água, torná-o fácil de incorporar em uma ampla variedade de aplicações, incluindo metal, plástico, vidro e revestimentos de papel; molde lubrificantes de liberação, e lubrificantes de corte de metais e estamparia. veja menos | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® 605 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical polyethylene wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in inks. | |
| AquaFLON® 797 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 797 é uma dispersão aquosa de uma cera de mistura de polietileno de elevado peso molecular/ PTFE. Em tintas e revestimentos à base de água, fornece boa resistência à fricção e deslizamento. Este produto apresenta partículas maiores vs microdispe...veja mais AquaFLON® 797 é uma dispersão aquosa de uma cera de mistura de polietileno de elevado peso molecular/ PTFE. Em tintas e revestimentos à base de água, fornece boa resistência à fricção e deslizamento. Este produto apresenta partículas maiores vs microdispersão e emulsões, controle de deslizamento e resistência à abrasão e impacto moderado no brilho. Ele é um surfactante não-iônico para boa dispersibilidade e compatibilidade, e tem excelente estabilidade durante o armazenamento, sem o uso de resinas ou aglutinantes. veja menos | |
| AquaFLON® MG (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. AquaFLON® MG is recommended for thin film water based compositions like printing inks, and overprint varnishes. | |
| AQUAMAT® 263 | BYK | Dispersão aquosa de cera de alisamento para melhora das propriedades de superfície de sistemas de pinturas a base de água e de tintas de impressão . Dispersão de cera oxidada de polietileno de alta densidade. | |
| CERAFLOUR® 920 | BYK | Polímero orgânico micronizado para dar opacidade (matting) em sistemas de tintas à base de água e à base de solvente. Polímero orgânico micronizado. | |
| CERAFLOUR® 999 | BYK | CERAFLOUR® 999 is an extra-fine, micronized PTFE-modified polyethylene wax for organic cosolvent-containing aqueous, solvent-borne, solvent-free, and UV coating systems, powder coatings, and printing inks to improve surface properties such as scratch and ...veja mais CERAFLOUR® 999 is an extra-fine, micronized PTFE-modified polyethylene wax for organic cosolvent-containing aqueous, solvent-borne, solvent-free, and UV coating systems, powder coatings, and printing inks to improve surface properties such as scratch and abrasion resistance. veja menos | |
| CeraSPERSE UV 636 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. | EverGlide UV 636 é uma emulsão de cera de carnaúba 25% em TRPGDA para tintas e revestimentos UV. Proporciona resistência ao deslizamento e desgaste, embora mantendo o brilho e claridade. Possui uma cera de tamanho pequeno de partícula (2-3 microns), que a...veja mais EverGlide UV 636 é uma emulsão de cera de carnaúba 25% em TRPGDA para tintas e revestimentos UV. Proporciona resistência ao deslizamento e desgaste, embora mantendo o brilho e claridade. Possui uma cera de tamanho pequeno de partícula (2-3 microns), que a torna ideal para películas muito finas e claras. Este produto é fornecido como uma suspensão estável e uniforme sem surfactantes adicionados ou agentes dispersantes. Pode ser incorporada por mistura simples. veja menos | |
| CeraSPERSE UV 691 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE UV 691 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| Deuteron MM 823 Scratch Resistance Additive | P.A.T. Products | Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...veja mais Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. veja menos | Request Sample |
| DOWSIL™ 11 Additive | Univar Solutions | Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coat...veja mais Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. veja menos | Request Sample |
| DOWSIL™ 56 Additive | Dow Performance Silicones | Dow Corning® 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based ...veja mais Dow Corning® 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. veja menos | |
| DOWSIL™ 56 Additive | Univar Solutions | Dow Corning® 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based ...veja mais Dow Corning® 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. veja menos | Request Sample |
| DOWSIL™ 57 Additive | Univar Solutions | Dow Corning® 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with ac...veja mais Dow Corning® 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. veja menos | Request Sample |
| EBECRYL® 3418 | Allnex | O EBECRYL® 3418 é um diacrilato de epoxi modificado que exibe excelentes reatividade e baixa viscosidade. Filmes de EBECRYL® 3418 curados por luz ultravioleta (UV) ou raio elétron (EB) apresentam uma alta flexibilidade, brilho, robustez, aderência e alta ...veja mais O EBECRYL® 3418 é um diacrilato de epoxi modificado que exibe excelentes reatividade e baixa viscosidade. Filmes de EBECRYL® 3418 curados por luz ultravioleta (UV) ou raio elétron (EB) apresentam uma alta flexibilidade, brilho, robustez, aderência e alta resistência química e resistência a riscos. veja menos | Request Sample |
| EBECRYL® 50 | Allnex | EBECRYL® 50 is the tetraacrylate ester of 5 mole ethoxylated pentaerythritol. It is a low viscosity diluting oligomer characterized by low odor and light color. EBECRYL® 50 provides fast cure response in ultraviolet light (UV) or electron beam (EB) cured ...veja mais EBECRYL® 50 is the tetraacrylate ester of 5 mole ethoxylated pentaerythritol. It is a low viscosity diluting oligomer characterized by low odor and light color. EBECRYL® 50 provides fast cure response in ultraviolet light (UV) or electron beam (EB) cured coatings and inks. Besides its high reactivity, EBECRYL® 50 improves the hardness and solvent resistance of cured coatings and inks. This product is particularly useful in offset inks, flexo inks and overprint varnishes. veja menos | Request Sample |
| EBECRYL® 8602 | Allnex | O EBECRYL® 8602 é um acrilato de uretano alifático nono-funcional. Após a polimerização, os filmes de EBECRYL® 8602 exibem uma melhora significativa na resistência às intempéries quando comparado com o acrilato de uretano alifático hexafuncional sem compr...veja mais O EBECRYL® 8602 é um acrilato de uretano alifático nono-funcional. Após a polimerização, os filmes de EBECRYL® 8602 exibem uma melhora significativa na resistência às intempéries quando comparado com o acrilato de uretano alifático hexafuncional sem comprometer a resistência à abrasão e riscos. Além disso, o EBECRYL® 8602 não contem compostos de estanho orgânico, metais pesados* ou quinonas adicionados intencionalmente. veja menos | Request Sample |
| EBECRYL® 895 | Allnex | Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and E...veja mais Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required. veja menos | Request Sample |
| EDAPLAN® LA 410 | Munzing Chemie | EDAPLAN® LA 410 is a colourless to slightly yellowish liquid, suitable for all non-aqueous coating and printing ink systems. It improves surface properties and can be used in curtain coatings. EDAPLAN® LA 410 is recommended for improved scratch resistance...veja mais EDAPLAN® LA 410 is a colourless to slightly yellowish liquid, suitable for all non-aqueous coating and printing ink systems. It improves surface properties and can be used in curtain coatings. EDAPLAN® LA 410 is recommended for improved scratch resistance and slip of metallic effect lacquers and varnishes. It prevents surface defects like craters and orange peel. EDAPLAN® LA 410 provides defoaming and degassing. veja menos | |
| FluoroSLIP® 225 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 225 is a PTFE and low molecular weight micronized polyethylene wax blend. FluoroSLIP® 225 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 511 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 511 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 511 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 605 (PTFE / Polytheylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 605 is a spherical polyethylene wax and PTFE blend. FluoroSLIP® 605 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSPERSE® 153V (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 153V is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 153V is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 6153V (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 6153V is a micronized PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 6153V is recommended for use in offset inks. | |
| FluoroSPERSE® 755 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 755 is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 755 is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 7908 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 7908 is a PTFE (polytetrafluoroethylene) micropowder dispersion in a lithographic varnish. | |
| Hydrocer 257 (Polyethylene Wax Disperison) | Shamrock Technologies, Inc. | Hydrocer 257 is polyethylene wax in a non-ionic aqueous dispersion recommended for water based ink systems. | |
| Hydrocer 357 (Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | Hydrocer 357 is a spherical polyethylene wax in a non-ionic aqueous dispersion recommended for water based ink systems. | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer EE 95 (Polyethylene Wax Emulsion) | Shamrock Technologies, Inc. | Hydrocer EE 95 is an anionic, high-density polyethylene wax emulsion. Hydrocer EE-95 is used in liquid inks for flexographic systems. | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies, Inc. | Hydrocer EP 91 is an anionic aqueous paraffin wax emulsion. Hydrocer EP 91 is recommended for use in aqueous ink systems. | |
| JONCRYL® WAX 26 | BASF Dispersions & Resins | Joncryl® WAX 26 is a 26% solids, small particle size, polyethylene wax emulsion that improves the rub resistance of water-based inks and coatings with no significant loss of gloss. | |
| JONCRYL® WAX 28 | BASF Dispersions & Resins | Joncryl® WAX 28 is a 35% solids polyethylene wax emulsion that improves the rub resistance of water-based inks and coatings without significant loss of gloss often associated with polyethylene wax additions. | |
| JONCRYL® WAX 4 | BASF Dispersions & Resins | Highly efficient, large particle size polyethylene wax dispersion designed to impart outstanding rub and scuff resistance to water based ink formulations. Its unique composition results in very high rub and scuff resistance at low use levels. | |
| LUDOX® CL-P | Univar Solutions | LUDOX® CL-P can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may hav...veja mais LUDOX® CL-P can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may have possible utility, LUDOX® CL-P and CL-X have been specially formulated to give superior performance and easy cleanup from coating machine surfaces. veja menos | Request Sample |
| LUDOX® CL-X | Univar Solutions | LUDOX® CL-X can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may hav...veja mais LUDOX® CL-X can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may have possible utility, LUDOX CL-P and CL-X have been specially formulated to give superior performance and easy cleanup from coating machine surfaces. veja menos | Request Sample |
| NANOARC® AL-2125 | Nanophase Technologies | A 45 wt% dispersion of 150 nm Aluminum Oxide in Propylene Glycol Methyl Ether Acetate. Improves scratch resistance in solvent-borne coating formulations. | |
| NANOARC® AL-2156 | Nanophase Technologies | A 45 wt% dispersion of 150 nm Aluminum Oxide in Water. Improves scratch resistance in water-borne coating formulations. | |
| NANOARC® AL-2255 | Nanophase Technologies | A 30 wt% dispersion of 20 nm Aluminum Oxide in Water. Improves scratch resistance in water-borne coating formulations. | |
| NANOARC® AL-2260 | Nanophase Technologies | A 30 wt% dispersion of 20 nm Aluminum Oxide in Tripropylene Glycol Diacrylate. Improves scratch resistance in UV/EB curable coating formulations. | |
| NANOARC® AL-2325 | Nanophase Technologies | A 55 wt% dispersion of 250 nm Aluminum Oxide in Propylene Glycol Methyl Ether Acetate. Improves scratch resistance in solvent-borne coating formulations. | |
| NANOARC® AL-2350 | Nanophase Technologies | A 55 wt% dispersion of 250 nm Aluminum Oxide in Water. Improves scratch resistance in water-borne coating formulations. | |
| NANOARC® AL-2360 | Nanophase Technologies | A 55 wt% dispersion of 250 nm Aluminum Oxide in Tripropylene Glycol Diacrylate. Improves scratch resistance in UV/EB curable coating formulations. | |
| NANOARC® AL-2425 | Nanophase Technologies | NANOARC® AL-2425 is a 50 wt% dispersion of 40 nm Aluminum Oxide in Propylene Glycol Methyl Ether Acetate. This product is recommended for use in a broad range of solvent borne coating applications to improves scratch resistance without significantly impac...veja mais NANOARC® AL-2425 is a 50 wt% dispersion of 40 nm Aluminum Oxide in Propylene Glycol Methyl Ether Acetate. This product is recommended for use in a broad range of solvent borne coating applications to improves scratch resistance without significantly impacting optical clarity, gloss, color or physical properties. veja menos | |
| NANOARC® AL-2460 | Nanophase Technologies | A 30 wt% dispersion of 40 nm Aluminum Oxide in Tripropylene Glycol Diacrylate. Improves scratch resistance in UV/EB curable coating formulations. | |
| NANOARC® AL-2825 | Nanophase Technologies | A 55 wt% dispersion of 800 nm Aluminum Oxide in Propylene Glycol Methyl Ether Acetate. Improves scratch resistance in solvent-borne coating formulations. | |
| NanoArc® AL-2850 | Nanophase Technologies | A 55 wt% dispersion of 800 nm Aluminum Oxide in Water. Improves scratch resistance in water-borne coating formulations. | |
| NANOBYK®-3620 | BYK | O NANOBYK®-3620 é uma dispersão aquosa livre de VOC composta de partículas nanohíbridas para proteger revestimentos de cobertura brilhantes, aquosos, pigmentados e não pigmentados contra arranhões e abrasão. Esta propriedade de proteção tem efeito logo de...veja mais O NANOBYK®-3620 é uma dispersão aquosa livre de VOC composta de partículas nanohíbridas para proteger revestimentos de cobertura brilhantes, aquosos, pigmentados e não pigmentados contra arranhões e abrasão. Esta propriedade de proteção tem efeito logo depois de um breve período de secagem. O NANOBYK® 3620 não tem influências negativas sobre o brilho e a transparência e é, portanto, particularmente adequado para vernizes. veja menos | |
| NANOPOL® C 750 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 750 shows very high performance in scratch- and abrasion-resistance without influencing the gloss or transparency of waterborne coatings. | Request Sample |
| NANOPOL® C 784 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 784 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the coating. | Request Sample |
| NANOPOX® C 620 | Evonik Operations GmbH, BL Coating Additives | NANOPOX® C 620 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the cured cationic UV-coating. | Request Sample |
| Neptune 1-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. | O Neptune 1 N1 é uma cera de polietileno de peso molecular médio. Oferece deslizamento excelente, assim como boa resistência à deterioração por raspagem, abrasão e unha. Este produto tem formulação extremamente estável e ajuda a evitar a expulsão de aditi...veja mais O Neptune 1 N1 é uma cera de polietileno de peso molecular médio. Oferece deslizamento excelente, assim como boa resistência à deterioração por raspagem, abrasão e unha. Este produto tem formulação extremamente estável e ajuda a evitar a expulsão de aditivo anti-espumante. veja menos | |
| Neptune 1-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. | Neptune 1-N5 is a water dispersible grade of polyethylene wax showing melting peaks ranging from 93 – 106°C. Neptune 1-N5 is recommended for water based inks. | |
| Neptune 5223 (Polyethylene Wax) | Shamrock Technologies, Inc. | Neptune 5223 is a polyethylene wax that has been oxidized to provide water wettability and has a uniform melting range peaking at 97°C. Neptune 5223 is recommended for water based liquid and UV inks. | |
| ORGASOL® 1002 D NAT 1 | Arkema Orgasol | Ultrafine powder of polyamide 6, with a narrow particle size distribution and nearly round particle shape. | |
| ORGASOL® 2001 EXD NAT 1 | Arkema Orgasol | Ultrafine powder of polyamide 12, with a narrow particle size distribution and nearly round particle shape. | |
| ORGASOL® 2001 UD NAT 1 | Arkema Orgasol | Ultrafine powder of polyamide 12, with a narrow particle size distribution and nearly round particle shape. | |
| ORGASOL® 2002 D NAT 1 | Arkema Orgasol | Ultrafine powder of polyamide 12, with a narrow particle size distribution and nearly round particle shape. | |
| ORGASOL® 3501 EXD NAT 1 | Arkema Orgasol | Ultrafine powder of copolyamide 6/12, with a narrow particle size distribution and nearly round particle shape. | |
| ORGASOL® 3502 D NAT 1 | Arkema Orgasol | Ultrafine powder of coplyamide 6/12, with a narrow particle size distribution and nearly round particle shape. | |
| PEL-SIL CL310 | Ele Corporation | PEL-SIL CL310 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and polypropylene oxide (PO) side chains. PEL-SIL CL310 minimizes foam stability and is an excellent defoamer for waterborne industrial or decorative ...veja mais PEL-SIL CL310 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and polypropylene oxide (PO) side chains. PEL-SIL CL310 minimizes foam stability and is an excellent defoamer for waterborne industrial or decorative coatings. PEL-SIL CL310 is compatible with solvent-borne coatings and inks. It provides good low and leveling performance, mar resistance, antiblocking and releasing properties. veja menos | |
| PEL-SIL CL380 | Ele Corporation | PEL-SIL CL380 is a linear, 100% active, PEG-10 siloxane polyether. It is an excellent flow and leveling agent for both waterborne and solventborne coatings. It also provides slip and mar resistance as well as anti-blocking properties. For UV/EB cure coati...veja mais PEL-SIL CL380 is a linear, 100% active, PEG-10 siloxane polyether. It is an excellent flow and leveling agent for both waterborne and solventborne coatings. It also provides slip and mar resistance as well as anti-blocking properties. For UV/EB cure coatings, PEL-SIL CL380 can reduce coefficient of friction reduction without generating foams or lowering gloss. It may also be incorporated into polymer systems by virtue of its two primary hydroxyl in polyurethane systems. veja menos | |
| R-8004 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. | R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...veja mais R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8004 has ≥70% siloxane content. veja menos | |
| R-8005 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. | R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...veja mais R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8005 has ≥50% siloxane content. veja menos | |
| Raybo 43 MarHard | Raybo Chemical | Raybo 43 MarHard is a silicone-free additive in a workable paste to thin liquid form, depending on temperature. This product is most commonly used to improve scratch and mar resistance in solventborne bake coating and ink system applications. | |
| Raybo 68 HydroSlip | Raybo Chemical | Raybo 68 HydroSlip is a coating and ink additive in a white liquid form. This product is most commonly used to improve flow control, mar resistance, and slip in water-based and water-reducible coating and ink system applications. | |
| S-381-N5 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | S-381 N5 é uma mistura de ceras modificada, micronizada para o desempenho de tipo de polipropileno com boa resistência aos raios UV. É um agente de controle de brilho para revestimentos de bobina à base de resina, em pó, madeira e industriais, bem como re...veja mais S-381 N5 é uma mistura de ceras modificada, micronizada para o desempenho de tipo de polipropileno com boa resistência aos raios UV. É um agente de controle de brilho para revestimentos de bobina à base de resina, em pó, madeira e industriais, bem como revestimentos e tintas UV. Com S-381 N5, a lata formuladora controlar o brilho, mantendo as características de dureza superficial. O S-381 N5 pode ser agitado em revestimentos para produzir acabamentos acetinados ou lisos com excelente resistência à deterioração e redução de COF. Um revestimento misturado com S-381 N5 terá uma superfície livre de polimento de pigmento, problemas típicos vividos com sílica. veja menos | |
| S-390-C (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. | S-390-C is a spherical polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-390-C is recommended for liquid and paste inks. | |
| S-394-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-N1 is a polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-N1 is recommended for liquid and paste inks. | |
| S-394-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-N5 is a polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-N5 is recommended for liquid and paste inks. | |
| S-394-SD4 (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-SD4 is a spherical polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-SD4 is recommended for liquid and paste inks. | |
| S-395-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-395-N5 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N5 is recommended for liquid and paste inks. | |
| S-395-SP5 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-395-SP5 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-SP5 is recommended for liquid and paste inks. | |
| S-413 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-413 is a polyethylene wax showing multiple melting peaks ranging from 107 – 142°C. S-413 is recommended for offset inks. | |
| SILCO GA 5143 | CHT USA (formerly ICM) | SILCO GA 5143 is an 80% active non-ionic emulsion of extremely high molecular weight polydimethylsiloxane. This emulsion is completely VOC free and specially developed to impart slip and mar resistance in water borne systems. SILCO GA 5143 reduces the coe...veja mais SILCO GA 5143 is an 80% active non-ionic emulsion of extremely high molecular weight polydimethylsiloxane. This emulsion is completely VOC free and specially developed to impart slip and mar resistance in water borne systems. SILCO GA 5143 reduces the coefficient of friction, provides antilocking, and imparts leveling and wetting. veja menos | |
| Silmer® ACR Di-50 | Siltech Corp. | Silmer® ACR Di-50 is a high molecular weight silicone acrylate fluid. It is used to give permanent slip and mar resistance to UV-curable coatings systems. Silmer®ACR Di-50 is used to improve surface smoothness and scratch resistance in UV-curable systems....veja mais Silmer® ACR Di-50 is a high molecular weight silicone acrylate fluid. It is used to give permanent slip and mar resistance to UV-curable coatings systems. Silmer®ACR Di-50 is used to improve surface smoothness and scratch resistance in UV-curable systems. The acrylate functionality gives a permanent binding into the matrix of the coating. It is a 100% active silicone that is soluble in aliphatic and aromatic solvents. veja menos | |
| Siltech® C-173 | Siltech Corp. | Siltech® C-173 is a 52% active carbinol functional silicone glycol copolymer that is primarily used to improve leveling and mar resistance in solvent based systems. Siltech® C-173 is designed for use in both solvent based and solvent free systems. It incr...veja mais Siltech® C-173 is a 52% active carbinol functional silicone glycol copolymer that is primarily used to improve leveling and mar resistance in solvent based systems. Siltech® C-173 is designed for use in both solvent based and solvent free systems. It increases surface slip, improves leveling, gloss, substrate wetting & gives anti-blocking benefits. It also prevents formation of Bernard cells and reduces the surface tension. It provides benefits that are not obtained with conventional silicone oil additives. veja menos | |
| Siltech® C-174 | Siltech Corp. | Siltech® C-174 is a 52% active carbinol functional silicone glycol copolymer that is primarily used to improve leveling and mar resistance in solvent based systems. Siltech® C-174 is primarily used in solvent-based systems although it is also suitable for...veja mais Siltech® C-174 is a 52% active carbinol functional silicone glycol copolymer that is primarily used to improve leveling and mar resistance in solvent based systems. Siltech® C-174 is primarily used in solvent-based systems although it is also suitable for solvent free systems. It increases slip and gloss in addition to providing substrate wetting and leveling. It also prevents the formation of Benard cells. veja menos | |
| Siltech® C-20 | Siltech Corp. | Siltech® C-20 is a carbinol functional silicone glycol copolymer surfactant. It is a solvent free, 100% active product. It imparts mar resistance and better slip to coatings. Siltech® C-20 additive can be used in solvent, water-based or solvent=less syste...veja mais Siltech® C-20 is a carbinol functional silicone glycol copolymer surfactant. It is a solvent free, 100% active product. It imparts mar resistance and better slip to coatings. Siltech® C-20 additive can be used in solvent, water-based or solvent=less systems. It effectively reduces surface tension and provides mar resistance or slip finishes. It also provides other benefits such as leveling, wetting, flow-out and aids pigment dispersion. It is effective at low concentrations. The recommended concentration used is between-% weight percent based on total solids. It should be added during the final thinning step. Preliminary tests in laboratory or a small-scale production unit necessary to obtain optimum results. veja menos | |
| Siltech® C-215 | Siltech Corp. | Siltech® C-215 is a reactive silicone glycol surfactant with carbinol functionality supplied at a 10% concentration in xylene. Siltech® C-215 is used in solvent-based formulations to provide anti-blocking benefits, and to improve slip & mar, rub and ab...veja mais Siltech® C-215 is a reactive silicone glycol surfactant with carbinol functionality supplied at a 10% concentration in xylene. Siltech® C-215 is used in solvent-based formulations to provide anti-blocking benefits, and to improve slip & mar, rub and abrasion resistance. It also prevents pigment separation and improves flow-out, wetting, leveling and gloss. veja menos | |
| Siltech® C-241 | Siltech Corp. | Siltech® C-241 is a polyether siloxane copolymer that is primarily used to eliminate cratering and improve slip. It is used in solvent-based, water-based and energy curing coatings and inks formulations to eliminate cratering, improve slip, anti-blocking ...veja mais Siltech® C-241 is a polyether siloxane copolymer that is primarily used to eliminate cratering and improve slip. It is used in solvent-based, water-based and energy curing coatings and inks formulations to eliminate cratering, improve slip, anti-blocking and flow. Siltech®C-241 prevents pigment flotation and provides mar resistance. veja menos | |
| Siltech® C-261 | Siltech Corp. | Siltech® C-261 is a modified silicone glycol copolymer diluted in butyl acetate. It provides leveling, substrate wetting and mar and abrasion resistance to solvent-based paints, inks, and coatings. | |
| Siltech® C-32 | Siltech Corp. | Siltech® C-32 is an alkyl aryl functional silicone fluid. It imparts leveling, de-aeration, mar resistance and pigment treatment without affecting the coatability or adhesion of the treated surface. Siltech® C-32 additive is used as an additive in solvent...veja mais Siltech® C-32 is an alkyl aryl functional silicone fluid. It imparts leveling, de-aeration, mar resistance and pigment treatment without affecting the coatability or adhesion of the treated surface. Siltech® C-32 additive is used as an additive in solvent, solvent-less and powder systems. It provides such benefits as leveling, de-aeration, mar resistance and pigment treatment. veja menos | |
| Siltech® C-608 | Siltech Corp. | Siltech®C-608 is a 100% active non-foaming water-soluble silicone glycol copolymer. It provides slip and mar resistance to water-borne based paints, inks and coatings. Siltech® C-608 is used as a non-foaming additive for water-borne systems. The primary f...veja mais Siltech®C-608 is a 100% active non-foaming water-soluble silicone glycol copolymer. It provides slip and mar resistance to water-borne based paints, inks and coatings. Siltech® C-608 is used as a non-foaming additive for water-borne systems. The primary function is to improve flow, leveling and release. It is recommended that Siltech® C-608 be used between 0.05-0.5% weight percent based on the total formulation. It can be added at any stage during the process. veja menos | |
| Siltech® C-816 | Siltech Corp. | Siltech® C-816 is a water-soluble alkyl functional silicone polyether. Its primary function is to provide soil resistance to water borne coatings. Siltech® C-816 is used as an additive in water-borne inks, paints and other coatings. It provides soil repel...veja mais Siltech® C-816 is a water-soluble alkyl functional silicone polyether. Its primary function is to provide soil resistance to water borne coatings. Siltech® C-816 is used as an additive in water-borne inks, paints and other coatings. It provides soil repellence to such coatings, as well as mar resistance and improved slip. veja menos | |
| SLIP-AYD® FS 444 | Elementis | O SLIP-AYD ® FS 444 é um aditivo líquido para aumentar a superfície de deslizamento e resistência à estragos em revestimentos à base de água e de solvente polar. | |
| SST®-2 (PTFE Micropowder) | Shamrock Technologies, Inc. | SST-2 é um pó de PTFE micronizado que é insolúvel, resistente ao calor, fácil de incorporar e altamente eficiente. SST-2 proporciona excelente deslizamento. SST-2 é ideal para uso com ceras de polietileno da Séries S da Shamrock, proporcionando melhor des...veja mais SST-2 é um pó de PTFE micronizado que é insolúvel, resistente ao calor, fácil de incorporar e altamente eficiente. SST-2 proporciona excelente deslizamento. SST-2 é ideal para uso com ceras de polietileno da Séries S da Shamrock, proporcionando melhor deslizamento e abrasão. veja menos | |
| SST®-3 (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-3 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 5.0 µm. SST®-3 is recommended for use in offset and liquid inks. | |
| SST®-3D (PTFE Micropowder) | Shamrock Technologies, Inc. | Shamrock SST-3D é pó PTFE micronizado que oferece excelente deslizamento e resistência à abrasão/fricção em tintas e revestimentos. | |
| SST®-4 (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-4 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 3.0 µm. SST®-4 is recommended for use in offset and liquid inks. | |
| SST®-5 (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-5 is a low MW PTFE micropowder (white) with particle size distribution at a mean value of 3.0 µm. SST®-5 is recommened for use in offset inks. | |
| TexMATTE 6005 (PMMA Powder) | Shamrock Technologies, Inc. | TexMatte 6005 é um produto de polimetil metacrilato reticulado. Ele pode ser facilmente disperso sob mistura em alta velocidade em solvente, em revestimentos à base de água ou UV. Este produto é resistente ao solvente, e é estável e compatível com todos o...veja mais TexMatte 6005 é um produto de polimetil metacrilato reticulado. Ele pode ser facilmente disperso sob mistura em alta velocidade em solvente, em revestimentos à base de água ou UV. Este produto é resistente ao solvente, e é estável e compatível com todos os tipos de revestimentos líquidos. TexMatte 6005 é ideal para sistemas a ar seco, secagem forçada e de cozimento. Este produto tem um tamanho médio de partícula de 5-8 μm. veja menos | |
| TexMATTE 6010 (PMMA Powder) | Shamrock Technologies, Inc. | TexMatte 6010 é um produto de polimetil metacrilato reticulado. Ele pode ser facilmente disperso sob mistura em alta velocidade em solvente, em revestimentos à base de água ou UV. Este produto é resistente ao solvente, e é estável e compatível com todos o...veja mais TexMatte 6010 é um produto de polimetil metacrilato reticulado. Ele pode ser facilmente disperso sob mistura em alta velocidade em solvente, em revestimentos à base de água ou UV. Este produto é resistente ao solvente, e é estável e compatível com todos os tipos de revestimentos líquidos. TexMatte 6010 é ideal para sistemas a ar seco, secagem forçada e de cozimento. Este produto tem um tamanho médio de partícula de 8-11 μm. veja menos | |
| TexMATTE 6014 (PMMA Powder) | Shamrock Technologies, Inc. | TexMatte 6014 é um produto de polimetil metacrilato reticulado. Ele pode ser facilmente disperso sob mistura em alta velocidade em solvente, em revestimentos à base de água ou UV. Este produto é resistente ao solvente, e é estável e compatível com todos o...veja mais TexMatte 6014 é um produto de polimetil metacrilato reticulado. Ele pode ser facilmente disperso sob mistura em alta velocidade em solvente, em revestimentos à base de água ou UV. Este produto é resistente ao solvente, e é estável e compatível com todos os tipos de revestimentos líquidos. TexMatte 6014 é ideal para sistemas a ar seco, secagem forçada e de cozimento. Este produto tem um tamanho médio de partícula de 11-15 μm. veja menos |
