| CHEMAX EMX-1155 | PCC Chemax, Inc. | Chemax EMX-1155 is designed for use in metal forming operations from stamping to deep draw applications. This material may comprise from 20–25% of a typical forming compound which would then be diluted to 5–50% based on severity of the operation. | |
| MAXHIB AA-0223 | PCC Chemax, Inc. | Maxhib AA-0223 protects multiple aluminum alloys from staining in traditional metalworking fluids. This material is both oil and solvent soluble and forms a stable dispersion at aqueous dilution. | |
| MAXLUBE 510 | PCC Chemax, Inc. | Maxlube 510 is a water soluble lubricant additive. It was developed to enhance the lubrication characteristics of metalworking and metal forming products. Due to its high viscosity and aqueous solubility, it is ideally suited for use in synthetic and semi...veja mais Maxlube 510 is a water soluble lubricant additive. It was developed to enhance the lubrication characteristics of metalworking and metal forming products. Due to its high viscosity and aqueous solubility, it is ideally suited for use in synthetic and semi-synthetic coolants to increase dynamic lubricity. veja menos | |
| MAXLUBE MV | PCC Chemax, Inc. | Maxlube MV is useful as a boundary lubricant in light duty, low viscosity oil based lubricants for soluble and semi-synthetic water based coolants. This product is also an excellent stand alone lubricant for high speed bearings. | |
| PIBSA 1000HR | Univar Solutions | PIBSA 1000HR is reacted from 1000 molecular weight highly reactive polyisobutylene. PIBSA 1000HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as ...veja mais PIBSA 1000HR is reacted from 1000 molecular weight highly reactive polyisobutylene. PIBSA 1000HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. veja menos | Request Sample |
| PIBSA 1300HR | Univar Solutions | PIBSA 1300HR is reacted from 1300 molecular weight highly reactive polyisobutylene. PIBSA 1300HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as ...veja mais PIBSA 1300HR is reacted from 1300 molecular weight highly reactive polyisobutylene. PIBSA 1300HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. veja menos | Request Sample |
| PIBSA 2300HR | Univar Solutions | PIBSA 2300HR is reacted from 2300 molecular weight highly reactive polyisobutylene. PIBSA 2300HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as ...veja mais PIBSA 2300HR is reacted from 2300 molecular weight highly reactive polyisobutylene. PIBSA 2300HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. veja menos | Request Sample |
| PIBSA 450HR | Univar Solutions | PIBSA 450HR is reacted from 450 molecular weight highly reactive polyisobutylene. PIBSA 450HR is produced via thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfact...veja mais PIBSA 450HR is reacted from 450 molecular weight highly reactive polyisobutylene. PIBSA 450HR is produced via thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. veja menos | Request Sample |
| PIBSA 750HR | Univar Solutions | PIBSA 750HR is reacted from 750 molecular weight highly reactive polyisobutylene. PIBSA 750HR is produced via thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfact...veja mais PIBSA 750HR is reacted from 750 molecular weight highly reactive polyisobutylene. PIBSA 750HR is produced via thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. veja menos | Request Sample |
| PIBSI E1 1.0 | Univar Solutions | PIBSI E1 1.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 1.0%. PIBSI E1 1.0 is derived from 2300 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...veja mais PIBSI E1 1.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 1.0%. PIBSI E1 1.0 is derived from 2300 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI E1 1.0 have common applications in a broad range of fuel and lubricants. veja menos | Request Sample |
| PIBSI E1 1.2 | Univar Solutions | PIBSI E1 1.2 is an ashless dispersant – succinimide containing a typical nitrogen content of 1.2%. PIBSI E1 1.2 is derived from 2300 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...veja mais PIBSI E1 1.2 is an ashless dispersant – succinimide containing a typical nitrogen content of 1.2%. PIBSI E1 1.2 is derived from 2300 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI E1 1.2 have common applications in a broad range of fuel and lubricants. veja menos | Request Sample |
| PIBSI F1 2.0 | Univar Solutions | PIBSI F1 2.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 2.0%. PIBSI F1 2.0 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...veja mais PIBSI F1 2.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 2.0%. PIBSI F1 2.0 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI F1 2.0 have common applications in a broad range of fuel and lubricants. veja menos | Request Sample |
| PIBSI F1 3.2 | Univar Solutions | PIBSI F1 3.2 is an ashless dispersant – succinimide containing a typical nitrogen content of 3.2%. PIBSI F1 3.2 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...veja mais PIBSI F1 3.2 is an ashless dispersant – succinimide containing a typical nitrogen content of 3.2%. PIBSI F1 3.2 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI F1 3.2 have common applications in a broad range of fuel and lubricants. veja menos | Request Sample |
| PIBSI F1 3.9 | Univar Solutions | PIBSI F1 3.9 is an ashless dispersant – succinimide containing a typical nitrogen content of 3.9%. PIBSI F1 3.9 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...veja mais PIBSI F1 3.9 is an ashless dispersant – succinimide containing a typical nitrogen content of 3.9%. PIBSI F1 3.9 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI F1 3.9 have common applications in a broad range of fuel and lubricants. veja menos | Request Sample |
| PIBSI F2 5.0 | Univar Solutions | PIBSI F2 5.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 5.0%. PIBSI F2 5.0 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...veja mais PIBSI F2 5.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 5.0%. PIBSI F2 5.0 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI F2 5.0 have common applications in a broad range of fuel and lubricants. veja menos | Request Sample |
