UL Prospector

成功!

成功保存搜索结果
CV3-2500 NuSil Silicone Technology 1 CV3-2500 is an optically clear silicone that is has controlled volatility. It is an ideal product for applications that require a low viscosity to create a superior flow and low outgassing. This is how it helps keep condensation from affecting sensitive d...展开 CV3-2500 is an optically clear silicone that is has controlled volatility. It is an ideal product for applications that require a low viscosity to create a superior flow and low outgassing. This is how it helps keep condensation from affecting sensitive devices. It can also be utilized as an adhesive for projects involving solar arrays. 收起
CV3-2640 NuSil Silicone Technology 1 CV3-2640 is a static dissipative silicone that has controlled volatility and cures at room temperature. This product can be utilized as shielding for RFI and EMI in space and electronic applications. It can also be used to adhere covers onto housings or f...展开 CV3-2640 is a static dissipative silicone that has controlled volatility and cures at room temperature. This product can be utilized as shielding for RFI and EMI in space and electronic applications. It can also be used to adhere covers onto housings or for any application where grooves require a non-flowable to limited flow material. 收起
CV4-2289-1 NuSil Silicone Technology 1 CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be u...展开 CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be used to protect electronic components, cable harness breakouts, seals, and gaskets from harsh environmental conditions. 收起
CV7-1142-1 NuSil Silicone Technology 1 CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broa...展开 CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broad operating temperature range so it can withstand hot and cold conditions. It also can be used for sealing openings in modules or housings where grooves or other configurations require a non-flowable to limited flow material.  收起
Cariflex™ IR0307 KU Polymer Kraton Polymers International Ltd. Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. 收起
Cariflex™ IR0310 KU Polymer Kraton Polymers International Ltd. Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. 收起
Cariflex™ IR0401 BU Latex Kraton Polymers International Ltd. Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Late...展开 Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Latex is used in adhesives, coatings, and sealants. 收起
Cariflex™ IR0401 SU Latex Kraton Polymers International Ltd. Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex ...展开 Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex is used in adhesives, coatings, and sealants. 收起
Request Sample Chlorinated Rubber-YURON CR-22 Yuron New Material 裕隆新材料 YURON CR-22是一种氯化橡胶产品,以白色粉末形式供应。它主要添加到溶剂型粘合剂中。它可以溶解于多数芳香族溶剂中,如甲苯或二甲苯,同时可溶于大多数酯中。
Request Sample Chlorinated Rubber-YURON CR-40 Yuron New Material 裕隆新材料 YURON CR-40是一种以白色粉末形式供货的氯化橡胶,它用作防腐涂料或胶粘剂的树脂,也可以和醇酸树脂共用或在胶粘剂配方中和其他树脂共用。
Request Sample Chlorinated Rubber-YURON CR-400 Yuron New Material 裕隆新材料 YURON CR-400是一种氯化橡胶产品,以白色粉末形式供应。主要用于在橡胶和金属应用中使用的粘合剂原料中。它可以溶解于多数芳香族溶剂中,如甲苯或二甲苯,同时可溶于大多数酯中。
Request Sample Chlorinated Rubber-YURON CR-90 Yuron New Material 裕隆新材料 YURON CR-90是一种氯化橡胶,是不溶于水的白色粉末。它用作防腐涂料或胶粘剂的树脂,也可以和醇酸树脂共用或在胶粘剂配方中和其他树脂共用。
Dow Corning® Class VI Elastomer C6-135 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-135 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part ...展开 Dow Corning® Class VI Elastomer C6-135 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part fabrication, extrusion, and medical devices, including those intended for implantation in humans for up to 29 days. This product has a nominal hardness of 35, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-150 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-150 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part ...展开 Dow Corning® Class VI Elastomer C6-150 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part fabrication, extrusion, and medical devices, including those intended for implantation in humans for up to 29 days. This product has a nominal hardness of 50, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-165 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-165 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part ...展开 Dow Corning® Class VI Elastomer C6-165 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part fabrication, extrusion, and medical devices, including those intended for implantation in humans for up to 29 days. This product has a nominal hardness of 65, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-180 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-180 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part ...展开 Dow Corning® Class VI Elastomer C6-180 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part fabrication, extrusion, and medical devices, including those intended for implantation in humans for up to 29 days. This product has a nominal hardness of 80, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. I...展开 Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together before use. This product has a nominal hardness of 40, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-750 Liquid Silicone Rubber Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. I...展开 Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together before use. This product has a nominal hardness of 50, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-770 Liquid Silicone Rubber Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-770 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. I...展开 Dow Corning® Class VI Elastomer C6-770 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together before use. This product has a nominal hardness of 70, durometer, Shore A. 收起
Dow Corning® QPI-230 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-230 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...展开 Dow Corning® QPI-230 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 30, durometer Shore A. 收起
Dow Corning® QPI-240 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-240 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...展开 Dow Corning® QPI-240 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 40, durometer Shore A. 收起
Dow Corning® QPI-250 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-250 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...展开 Dow Corning® QPI-250 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 50, durometer Shore A. 收起
Dow Corning® QPI-260 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-260 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...展开 Dow Corning® QPI-260 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 60, durometer Shore A. 收起
Dow Corning® QPI-270 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-270 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...展开 Dow Corning® QPI-270 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 70, durometer Shore A. 收起
EPM-2461 NuSil Silicone Technology 1 EPM-2461 is a dissipative silicone elastomer that has a low volatility and offers low modulus. This elastomer can be used for static dissipation in electronic components and for applications that require low volatility. It can also be utilized in any appl...展开 EPM-2461 is a dissipative silicone elastomer that has a low volatility and offers low modulus. This elastomer can be used for static dissipation in electronic components and for applications that require low volatility. It can also be utilized in any applications where grooves and other configurations require a non-flowing material. 收起
EPM-2462 NuSil Silicone Technology 1 EPM-2462 is a two-part, tan-colored, electrically conductive silicone elastomer that has a 20:1 Mix Ratio (Part A: Part B). This product can be used as a thermally and electrically conductive interface material. It can also be utilized with form-in-place ...展开 EPM-2462 is a two-part, tan-colored, electrically conductive silicone elastomer that has a 20:1 Mix Ratio (Part A: Part B). This product can be used as a thermally and electrically conductive interface material. It can also be utilized with form-in-place conductive gaskets, and for applications that require a material with low volatility. 收起
EPM-2495 NuSil Silicone Technology 1 EPM-2495 is a thermal interface silicone elastomer that has a low volatility and is designed to allow a bond line thickness that is <=50 micron to reduce thermal resistance. This product can be used as an adhesive to bond integrated circuit substrates, ba...展开 EPM-2495 is a thermal interface silicone elastomer that has a low volatility and is designed to allow a bond line thickness that is <=50 micron to reduce thermal resistance. This product can be used as an adhesive to bond integrated circuit substrates, base plates, heat sinks or where grooves or other configurations require a non-flowable material. It is also ideal for applications that would require a low volatility under extreme operating conditions. 收起
FS-3730-11 NuSil Silicone Technology 1 FS-3730-11 is a grey, RTV silicone that is based on a 100 mole % fluorosilicone. This is a strong product as it bonds aggressively to most surfaces. It can be used for bonding and sealing applications that require fuel and/or solvent resistance. It is als...展开 FS-3730-11 is a grey, RTV silicone that is based on a 100 mole % fluorosilicone. This is a strong product as it bonds aggressively to most surfaces. It can be used for bonding and sealing applications that require fuel and/or solvent resistance. It is also able to provide protection or can bond hardware components that are exposed to gasoline or aviation fuels. 收起
FS-3781 NuSil Silicone Technology 1 FS-3781 is a fluorosilicone high consistency elastomer that is strained through a 400-mesh screen (minimum) to ensure freedom from particulate contamination. It can be used for applications that require solvent resistance. It can also be utilized for tran...展开 FS-3781 is a fluorosilicone high consistency elastomer that is strained through a 400-mesh screen (minimum) to ensure freedom from particulate contamination. It can be used for applications that require solvent resistance. It can also be utilized for transfer and compression molding parts such as gasket, stoppers, seals and o-rings. 收起
GEL-3500 NuSil Silicone Technology 1 GEL-3500 is a two-part, firm fluorosilicone gel that has a 1:1 mix ratio. It is available in custom formulations to offer various cure schedules, work times, and penetration values that make it convenient to match processing techniques to production requi...展开 GEL-3500 is a two-part, firm fluorosilicone gel that has a 1:1 mix ratio. It is available in custom formulations to offer various cure schedules, work times, and penetration values that make it convenient to match processing techniques to production requirements. This product is best utilized in applications that would require a gel that has a solvent resistance. 收起
GEL-8170 NuSil Silicone Technology 1 GEL-8170 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, encapsulating, backfilling, and dampening situations. It can also be used for photonics ...展开 GEL-8170 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, encapsulating, backfilling, and dampening situations. It can also be used for photonics applications including HBLED's, photo detectors, flat panel displays and tacking/staking sensitive joints. This gel is ideal for applications that require an operating temperature range of -65°C to 200°C (-85°F to 392°F). 收起
GEL-8250 NuSil Silicone Technology 1 GEL-8250 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, backfilling, encapsulating, and dampening situations. This gel is ideal for use in appl...展开 GEL-8250 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, backfilling, encapsulating, and dampening situations. This gel is ideal for use in applications that involve extreme temperatures with an operating temperature range of -115°C to 265°C (-178°F to 500°F). 收起
LS1-6140 NuSil Silicone Technology 1 LS1-6140 is an optically clear silicone elastomer that is based on a methyl silicone polymer. It can be used for bonding, casting or compression molding of high performance optical components. This product can also be used for photonics applications that ...展开 LS1-6140 is an optically clear silicone elastomer that is based on a methyl silicone polymer. It can be used for bonding, casting or compression molding of high performance optical components. This product can also be used for photonics applications that require a low volatility silicone to avoid contamination. 收起
LS1-6941 NuSil Silicone Technology 1 LS1-6941 is a transparent, pourable silicone that has a 1:1 mix ratio. It can be used as an adhesive or encapsulant for applications that require index matching at 1.41. This product can be used in the injection and transfer molding of optical components....展开 LS1-6941 is a transparent, pourable silicone that has a 1:1 mix ratio. It can be used as an adhesive or encapsulant for applications that require index matching at 1.41. This product can be used in the injection and transfer molding of optical components. It will cure in contact with most materials common to biomedical assemblies. 收起
Nipol® DN101 Zeon Corporation Nipol® DN101 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile ru...展开 Nipol® DN101 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile rubber. 收起
Nipol® DN101L Zeon Corporation Nipol® DN101L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile r...展开 Nipol® DN101L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile rubber. This product has a lower Mooney viscosity than DN101. 收起
Pergut® B 10 Covestro (formerly Bayer MaterialScience) 科思创 是一种细粉末,可用于配制快干防腐涂料,具有良好的耐候稳定性和耐水耐化学品性能
Pergut® B 20 Covestro (formerly Bayer MaterialScience) 科思创 细粉末状,可用于配制快干防腐涂料,具有良好的耐候性和耐水耐化学品稳定性。它也可作为防磨混凝土地板涂料和路标漆
Pergut® S 10 Covestro (formerly Bayer MaterialScience) 科思创 完全氯化烯属聚合物,用作抗腐蚀涂料的主体树脂。
Pergut® S 130 Covestro (formerly Bayer MaterialScience) 科思创 作为基料与其他物质一起用于胶粘剂
Pergut® S 170 Covestro (formerly Bayer MaterialScience) 科思创 作为基料与其他物质一起用于胶粘剂
Pergut® S 20 Covestro (formerly Bayer MaterialScience) 科思创 完全氯化烯属聚合物,用作抗腐蚀和混凝土地板涂料以及道路标线油漆的主体树脂。
Pergut® S 40 Covestro (formerly Bayer MaterialScience) 科思创 完全氯化烯属聚合物,用作抗腐蚀涂料的主体树脂。
Pergut® S 5 Covestro (formerly Bayer MaterialScience) 科思创 完全氯化烯属聚合物,用作抗腐蚀涂料的主体树脂,以及高固含量涂料的联合树脂。
Pergut® S 90 Covestro (formerly Bayer MaterialScience) 科思创 完全氯化烯属聚合物,用作游泳池和混凝土涂料的主体树脂。
R-2160 NuSil Silicone Technology 1 R-2160 is a two-part, red, pourable silicone system that cures at room temperature or rapidly with heat. This product has a high tear strength and good physical properties. It is ideal for use in potting connectors, cable harness breakouts, molded high vo...展开 R-2160 is a two-part, red, pourable silicone system that cures at room temperature or rapidly with heat. This product has a high tear strength and good physical properties. It is ideal for use in potting connectors, cable harness breakouts, molded high voltage terminals. seals and gaskets due to its high physical strength. It is best used for applications that require an operating temperature range of -65°C to 315°C (-85°F to 600°F). 收起
R-2165 NuSil Silicone Technology 1 R-2165 is a thermally conductive, silicone, potting elastomer that is pourable, self-leveling, and cures at room temperature. This product has enhanced thermal conductivity for removal of heat and improved reliability. It can be used in multiple applicati...展开 R-2165 is a thermally conductive, silicone, potting elastomer that is pourable, self-leveling, and cures at room temperature. This product has enhanced thermal conductivity for removal of heat and improved reliability. It can be used in multiple applications such as potting for sensors, relays, and other electronic components that require protection from vibration and other harsh environmental conditions. 收起
R-2175 NuSil Silicone Technology 1 R-2175 is a two-part, black, pourable, self-leveling silicone potting elastomer that cures at room temperature. The low viscosity of this product allows for the potting of complex geometries without entrapping air. It is thermally stable, flowable, and ha...展开 R-2175 is a two-part, black, pourable, self-leveling silicone potting elastomer that cures at room temperature. The low viscosity of this product allows for the potting of complex geometries without entrapping air. It is thermally stable, flowable, and has several applications which include potting for connectors, sensors, relays, power devices and other electronic components that require protection from shock, vibration and other environmental hazards. 收起
R-2370 NuSil Silicone Technology 1 R-2370 is a two-part, RTV silicone rubber foam that has a 100:6 Mix Ratio (Base: Catalyst). It yields a low density silicone rubber foam when catalyzed. It is best utilized in shock and vibration dampening situations that require a flexible, light weight ...展开 R-2370 is a two-part, RTV silicone rubber foam that has a 100:6 Mix Ratio (Base: Catalyst). It yields a low density silicone rubber foam when catalyzed. It is best utilized in shock and vibration dampening situations that require a flexible, light weight foam with exceptional electrical and thermal properties. 收起
R-2380 NuSil Silicone Technology 1 R-2380 is a two-part, RTV silicone rubber foam that yields a medium density, and has a 100:6 Mix Ratio (Base: Catalyst). This product is specifically designed to be used in vibration and shock dampening situations that require a lightweight, flexible foam...展开 R-2380 is a two-part, RTV silicone rubber foam that yields a medium density, and has a 100:6 Mix Ratio (Base: Catalyst). This product is specifically designed to be used in vibration and shock dampening situations that require a lightweight, flexible foam that also has exceptional thermal and electrical properties. 收起
R-2550 NuSil Silicone Technology 1 R-2550 is a translucent RTV silicone elastomer has a wide service temperature range. It can be utilized as a heat shielding material for potting, sealing and bonding applications. This product will also be useful in aerospace applications for ablative coa...展开 R-2550 is a translucent RTV silicone elastomer has a wide service temperature range. It can be utilized as a heat shielding material for potting, sealing and bonding applications. This product will also be useful in aerospace applications for ablative coatings that require a material that pours. It can withstand extreme temperatures, operating in a range of -115 to 260°C (-178 to 500°F). 收起
R-3930 NuSil Silicone Technology 1 R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for...展开 R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can help minimize ice adhesion. 收起
R21-2615 NuSil Silicone Technology 1 R21-2615 is a high durometer silicone elastomer that is flowable and optically clear. This product can be used in any application that requires a high durometer, flowable material. It can be used to encapsulating and potting electronic devices and for mak...展开 R21-2615 is a high durometer silicone elastomer that is flowable and optically clear. This product can be used in any application that requires a high durometer, flowable material. It can be used to encapsulating and potting electronic devices and for making molded parts. 收起
R3-2160 NuSil Silicone Technology 1 R3-2160 is a two-part, pourable silicone system that has a high tear strength and good physical properties. It is designed for enhance performance in extreme high and low temperatures. The ideal use for this high temperature adhesive/sealant is for pottin...展开 R3-2160 is a two-part, pourable silicone system that has a high tear strength and good physical properties. It is designed for enhance performance in extreme high and low temperatures. The ideal use for this high temperature adhesive/sealant is for potting connectors, seals and gaskets, molded high voltage terminals, and cable harness breakouts. 收起
R7-3521-11 NuSil Silicone Technology 1 R7-3521-11 is a dark grey, 50 mole % fluorosilicone elastomer that can be cured with heat in an oven or heat lamp, and can also be cured at room temperature. This product has a 1:1 Mix Ratio (Part A:B). It can be used for molding parts such as seals, stop...展开 R7-3521-11 is a dark grey, 50 mole % fluorosilicone elastomer that can be cured with heat in an oven or heat lamp, and can also be cured at room temperature. This product has a 1:1 Mix Ratio (Part A:B). It can be used for molding parts such as seals, stoppers, and O-rings. It can also be used for applications that require a good solvent resistance. 收起
Resiprene 36 PT. Industri Karet Nusantara Resiprene 36 is a cyclized rubber resin derived from natural rubber that can be used with natural rubber and isocyanates to give excellent primer for polypropylene film in manufacture of pressure sensitive adhesive tapes. This product can also be used in ...展开 Resiprene 36 is a cyclized rubber resin derived from natural rubber that can be used with natural rubber and isocyanates to give excellent primer for polypropylene film in manufacture of pressure sensitive adhesive tapes. This product can also be used in protective coatings, printing inks, marine paints, and back mirror tapes. 收起
Revertex LCS Synthomer Revertex LCS is a high solids, evaporated natural rubber latex concentrate primarily stabilized with potassium hydroxide. This product has a total solids content of 67.5% and a Brookfield viscosity maximum of 1600 cPs. Revertex LCS is most commonly used...展开 Revertex LCS is a high solids, evaporated natural rubber latex concentrate primarily stabilized with potassium hydroxide. This product has a total solids content of 67.5% and a Brookfield viscosity maximum of 1600 cPs. Revertex LCS is most commonly used in adhesive manufacturing applications. 收起
Revertex STD Synthomer Revertex STD is a high-solids, evaporated, natural rubber latex concentrate stabilized with potassium hydroxide compared with centrifuged and other ammoniated latex concentrates. This product has a total solids content of 73% an a Brookfield viscosity ma...展开 Revertex STD is a high-solids, evaporated, natural rubber latex concentrate stabilized with potassium hydroxide compared with centrifuged and other ammoniated latex concentrates. This product has a total solids content of 73% an a Brookfield viscosity maximum of 9000 cPs. Revertex STD is most commonly used in adhesive production applications. 收起
Revultex U-LCTX Synthomer Revultex U-LCTX is an unvulcanized, centrifuged latex preserved with an ultra-low level of ammonia and other preservatives. This product is most commonly used in adhesive production applications where an ultra low level of ammonia is required.
SCV-2585 NuSil Silicone Technology 1 SCV-2585 is a silicone elastomer that features Ultra Low OutgassingTM and also has a high tear strength. This makes it an ideal product to provide protection to electronic components against shock, vibration, moisture, dust and other environmental hazards...展开 SCV-2585 is a silicone elastomer that features Ultra Low OutgassingTM and also has a high tear strength. This makes it an ideal product to provide protection to electronic components against shock, vibration, moisture, dust and other environmental hazards. It can also perform under a broad temperature range for electronic and space applications. 收起
SCV-2586 NuSil Silicone Technology 1 SCV-2586 a potting and encapsulated silicone elastomer that features Ultra Low OutgassingTM. It can be applied to provide radiation resistance, thermal and oxidation stability. This product is especially useful to bond solar cells to solar array panels an...展开 SCV-2586 a potting and encapsulated silicone elastomer that features Ultra Low OutgassingTM. It can be applied to provide radiation resistance, thermal and oxidation stability. This product is especially useful to bond solar cells to solar array panels and for applications that require a product with minimal volatility. 收起
SFM5-2350 NuSil Silicone Technology 1 SFM5-2350 is a flame retardant, RTV silicone foam that yields a medium density. It can be utilized as a flame retardant seal and for intricate back-filling due to a low viscosity and longer work time. This product can also be utilized in shock and vibrati...展开 SFM5-2350 is a flame retardant, RTV silicone foam that yields a medium density. It can be utilized as a flame retardant seal and for intricate back-filling due to a low viscosity and longer work time. This product can also be utilized in shock and vibration dampening situations that require a lightweight, flexible foam, and provides excellent thermal insulation and radiation resistance. It is useful where stability at higher and lower temperatures is required. 收起
Silastic® BioMedical Grade ETR Elastomer Q7-4535 Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4535 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for p...展开 Silastic® BioMedical Grade ETR Elastomer Q7-4535 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for peroxide cure. THis produce has a nominal hardness of 35, Shore A Durometer. 收起
Silastic® BioMedical Grade ETR Elastomer Q7-4550 Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4550 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for p...展开 Silastic® BioMedical Grade ETR Elastomer Q7-4550 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for peroxide cure. THis produce has a nominal hardness of 50, Shore A Durometer. 收起
Silastic® BioMedical Grade ETR Elastomer Q7-4565 Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4565 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for p...展开 Silastic® BioMedical Grade ETR Elastomer Q7-4565 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for peroxide cure. THis produce has a nominal hardness of 65, Shore A Durometer. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4840 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4840 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4840 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 40, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4850 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4850 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4850 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 50, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4860 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4860 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4860 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 60, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4870 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4870 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4870 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 70, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6830 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6830 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6830 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 30, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6840 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6840 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6840 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 40, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6860 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6860 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6860 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 60, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7840 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7840 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7840 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product has a nominal hardness of 40, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7850 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7850 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7850 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product has a nominal hardness of 50, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7870 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7870 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7870 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product has a nominal hardness of 70, durometer Shore A. 收起