| Disproportionated Rosin 1st Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起 | |
| Disproportionated Rosin Extra Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起 | |
| HIKOREZ A-1100 | Kolon | HIKOREZ A-1100 is a pale yellow thermoplastic resin. This product can be used as tackifier for pressure sensitive adhesives. HIKOREZ A-1100 can be used as the binder for hot melt road marking as well as a binder for hot melt road marking. | |
| HIKOREZ A-1100S | Kolon | HIKOREZ A-1100S is a pale yellow thermoplastic resin which is primarily used as tackifier for pressure sensitive adhesives. | |
| HIKOREZ A-1115 | Kolon | HIKOREZ A-1115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ A-2115 | Kolon | HIKOREZ A-2115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ C-1100 | Kolon | HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhes...展开 HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhesive, binder for hot melt road marking and rubber compounding agent for tires, tubes, rubber coated clothes and etc. 收起 | |
| HIKOREZ H-2100 | Kolon | HIKOREZ H-2100 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot me...展开 HIKOREZ H-2100 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot melt adhesive, because of its good compatibility with base polymer such as Styrene Isoprene Styrene and Ethylene Vinyl Acetate. 收起 | |
| HIKOREZ H-2130 | Kolon | HIKOREZ H-2130 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot me...展开 HIKOREZ H-2130 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot melt adhesive, because it is compatible with base polymer such as Styrene Isoprene Styrene and Ethylene Vinyl Acetate. 收起 | |
| HIKOREZ H-2200 | Kolon | HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Sty...展开 HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Styrene Butadiene Styrene and Styrene Isoprene Styrene. 收起 | |
| HIKOREZ H-2300 | Kolon | HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethyl...展开 HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethylene Vinyl Acetate and Styrene Isoprene Styrene. 收起 | |
| HIKOREZ R-1095 | Kolon | HIKOREZ R-1095 is a pale yellow thermoplastic resinwhich is primarily used as a binder for hot melt road marking. | |
| HIKOREZ R-1100S | Kolon | HIKOREZ R-1100S is a pale yellow thermoplastic which is used primarily as a binder for hot melt road marking. | |
| HIKOREZ T-1080 | Kolon | HIKOREZ T-1080 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ T-1095 | Kolon | HIKOREZ T-1095 is a pale yellow thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-1095 also can be used as tackifier for hot melt adhesives. | |
| HIKOREZ T-1100 | Kolon | HIKOREZ T-1100 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ T-2093 | Kolon | HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of i...展开 HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as EVA. 收起 | |
| HIKOREZ T-3100 | Kolon | HIKOREZ T-3100 is a modified aliphatic hydrocarbon resin. HIKOREZ T-3100 was developed for solvent based pressure sensitive adhesive tapes, hot melt pressure adhesives and hot melt adhesives. | |
| HIKOTACK DP-100 | Kolon | HIKOTACK DP-100 is pale yellow thermoplastic resin. HIKOTACK DP-100 can be used as a vehicle for paint products as well as a tackifier for EVA based hot melt adhesives. | |
| HIKOTACK P-110S | Kolon | HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete c...展开 HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete curing agent and binder for asphalt. 收起 | |
| HIKOTACK P-120H | Kolon | HIKOTACK P-120H is pale yellow thermoplastic resin which is primarily used as a modifying resin for paint & ink products and hot melt adhesives. | |
| HIKOTACK P-120HS | Kolon | HIKOTACK P-120HS is pale yellow thermoplastic resin. HIKOTACK P-120HS has a relatively higher softening point than HIKOTACK P-120, and is mainly used as a vehicle for paint and ink products, water repellent agents, concrete curing agent and binder for asp...展开 HIKOTACK P-120HS is pale yellow thermoplastic resin. HIKOTACK P-120HS has a relatively higher softening point than HIKOTACK P-120, and is mainly used as a vehicle for paint and ink products, water repellent agents, concrete curing agent and binder for asphalt. 收起 | |
| HIKOTACK P-120P | Kolon | HIKOTACK P-120P is pale yellow thermoplastic resin which is primarily used as a vehicle for other chemicals in the coating industry and tackifier for Ethylene Vinyl Acetate based hot melt adhesives. | |
| HIKOTACK P-120S | Kolon | HIKOTACK P-120S is pale yellow thermoplastic resin which is primarily used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-120S can be also used as water repellent agent, concrete curing agent, and binder for asphalt. | |
| HIKOTACK P-140 | Kolon | HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and inc...展开 HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. HIKOTACK P-140 can also be used as binder for color asphalt and tackifier for EVA based hot melt adhesives. 收起 | |
| HIKOTACK P-150 | Kolon | HIKOTACK P-150 is pale yellow thermoplastic resin which is primarily used as a vehicle for ink. HIKOTACK P-150 is compatible with rosin modified phenolic resin, which means it can be used with phenolic resin in off-set ink to decrease the set time and inc...展开 HIKOTACK P-150 is pale yellow thermoplastic resin which is primarily used as a vehicle for ink. HIKOTACK P-150 is compatible with rosin modified phenolic resin, which means it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. 收起 | |
| HIKOTACK P-90 | Kolon | HIKOTACK P-90 is pale yellow thermoplastic resin that can be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK P-90HS | Kolon | HIKOTACK P-90HS is pale yellow thermoplastic resin which is used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK P-90I | Kolon | HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with vario...展开 HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with various solvents. 收起 | |
| HIKOTACK P-90S | Kolon | HIKOTACK P-90S is pale yellow thermoplastic resin n be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK(CIR) C-120 | Kolon | HIKOTACK(CIR) C-120 is a kind of thermoplastic aromatic resin which is used as vehicle for paint varnish and various types of ink. | |
| HIKOTACK(CIR) C-90 | Kolon | HIKOTACK(CIR) C-90 is a kind of thermoplastic aromatic resin, which is produced through the polymerization of ingredients such as Styrene, Coumarone and Indenet. HIKOTACK(CIR) C-90 is mainly used in the rubber industry. | |
| Hydrocarbon DCPD Resin HSU100 | Resin Chemicals Co., Ltd. | Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used a...展开 Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used as a tackifier for hot melt adhesives, hot melt pressure sensitive adhesives, and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrocarbon Resin C5 HPE100A | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing o...展开 Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100A-L | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing...展开 Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C9 HPE100P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE100P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120PL | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展开 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrogenated Hydrocarbon Resin C5 HPE100H | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is c...展开 Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrogenated Hydrocarbon Resin C9 HFM-100 | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manu...展开 Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manufacturing of hot melt adhesives and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrogenated Rosin Ester | Resin Chemicals Co., Ltd. | Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color...展开 Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color, low odor, good heat stability, and excellent aging resistance. 收起 | |
| Hydrogenated Rosin-A | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-B | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-C | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-D | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Liquid Rosin Ester LRE-1 | Resin Chemicals Co., Ltd. | Liquid Rosin Ester LRE-1 is a liquid rosin resin created from gum rosin through esterification with polyol. This product is commonly used in applications such as solvent-based PSA, adhesive tapes, and glue. | |
| Polymerized Rosin | Resin Chemicals Co., Ltd. | Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起 | |
| Refined Rosin Modified Resin GE-85L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin GE-90L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-100L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-105L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-95L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Rosin Modified Resin GE85 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used ...展开 Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin GE90 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used ...展开 Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE 105 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly us...展开 Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE100 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly use...展开 Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE95 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used ...展开 Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 105 | Resin Chemicals Co., Ltd. | Terpene Resin 105 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 100-110°C and contains a maximum impurity level of 30ppm. This product is commonly used in the...展开 Terpene Resin 105 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 100-110°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 115 | Resin Chemicals Co., Ltd. | Terpene Resin 115 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 110-120°C and contains a maximum impurity level of 30ppm. This product is commonly used in the...展开 Terpene Resin 115 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 110-120°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 85 | Resin Chemicals Co., Ltd. | Terpene Resin 85 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 80-90°C and contains a maximum impurity level of 30ppm. This product is commonly used in the ma...展开 Terpene Resin 85 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 80-90°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 95 | Resin Chemicals Co., Ltd. | Terpene Resin 95 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 90-100°C and contains a maximum impurity level of 30ppm. This product is commonly used in the m...展开 Terpene Resin 95 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 90-100°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Waterborne Emulsion Rosin Ester WBE138 | Resin Chemicals Co., Ltd. | Waterborne Emulsion Rosin Ester WBE138 is a unique waterborne tackifier that combines high solids content and high adhesion performance and stability at high speed. This product is commonly used in applications such as water-based adhesives and glue. It c...展开 Waterborne Emulsion Rosin Ester WBE138 is a unique waterborne tackifier that combines high solids content and high adhesion performance and stability at high speed. This product is commonly used in applications such as water-based adhesives and glue. It can provide aggressive tack and peel, and give a unique balance of room temperature and low temperature adhesion in pressure sensitive adhesives. 收起 |
