| Amicure® CG-NA Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Amicure® CG-NA Curing Agent is an unpulverized grade of dicyandiamide designed for use as a latent curing agent for epoxy resins in solventbased processes. It is ideal for use in electrical laminates, and solvent-based, pre-preg composites. | Request Sample |
| AMICURE® UR Curing Agent | Evonik Operations GmbH, BL Crosslinkers | AMICURE® UR Curing Agent is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamide- cured epoxy resins. It combines excellent latency at ambient temperature with rapid cure in systems heated above its activation temperature. I...展开 AMICURE® UR Curing Agent is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamide- cured epoxy resins. It combines excellent latency at ambient temperature with rapid cure in systems heated above its activation temperature. It is ideal for use in one-pack paste and film adhesives, heat-sure composites, and prepreg composites. 收起 | Request Sample |
| Ancamide® 220 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings. | Request Sample |
| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| ANCAMIDE 221® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...展开 ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起 | Request Sample |
| ANCAMIDE® 3201 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 3201 Curing Agent is a low viscosity, solvent-free formulated polyaminoamide adduct. The curing agent is an accelerated version of Ancamine® 3200 and is recommended for use with liquid epoxy resin for the development of primers, coatings particu...展开 ANCAMIDE® 3201 Curing Agent is a low viscosity, solvent-free formulated polyaminoamide adduct. The curing agent is an accelerated version of Ancamine® 3200 and is recommended for use with liquid epoxy resin for the development of primers, coatings particularly for wet and high humid application areas. In addition the curing agent can be used for high-solid coatings for corrosion protection under severe conditions. 收起 | Request Sample |
| ANCAMIDE® 400 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and p...展开 ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and putties, castings, laminates, and cable jointing compounds. 收起 | Request Sample |
| Ancamide® 910 | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel streng...展开 Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel strength, excellent thermal shock resistance, and good electrical properties. Additional features include lower viscosity than conventional polyamides and DOT non-corrosive status. Ancamide® 910 curing agent can be used either as a sole curing agent or as a modifier. 收起 | Request Sample |
| Ancamine® 2014AS/FG | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2014AS/FG is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-com...展开 Ancamine® 2014AS/FG is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-component adhesives and solvent free laminating. 收起 | Request Sample |
| Ancamine® 2337S | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepreg...展开 Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepregs. This product is a light yellow powder. 收起 | Request Sample |
| Ancamine® 2442 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2442 curing agent is a modified polyamine designed for use as a latent curing agent for one-component epoxy formulations. The product can also be used to accelerate dicyandiamide (DICY). It provides an excellent balance of low-temp...展开 Ancamine® 2442 curing agent is a modified polyamine designed for use as a latent curing agent for one-component epoxy formulations. The product can also be used to accelerate dicyandiamide (DICY). It provides an excellent balance of low-temperature activation, good shelf stability and high glass transition temperature, and can be used in many applications requiring latency and high performance. 收起 | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展开 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 | Request Sample |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| EPODIL® 748 REACTIVE DILUENT | Evonik Operations GmbH, BL Crosslinkers | 通用型稀释剂。低毒性和低蒸气压。反应速度慢，具有良好的降粘作用，可增进柔韧性并可改善对非极性表面的附着力 | Request Sample |
| EPODIL® 749 REACTIVE DILUENT | Evonik Operations GmbH, BL Crosslinkers | 低挥发性稀释剂。很小程度地降低物理性能和反应活性。可应用于国内工程、电子灌装和封装 | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展开 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起 | Request Sample |
| EPODIL® LV5 DILUENT | Evonik Operations GmbH, BL Crosslinkers | Epodil LV5 diluent is a chemically inert, low viscosity liquid hydrocarbon resin. It is soluble in and compatible with a wide variety of epoxy resins as well as most curing agents. | Request Sample |
| Fujicure 5000 | Sanho Chemical Co., Ltd. | Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive ...展开 Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive and solvent-based coating formulation applications. 收起 | |
| Fujicure 5260 | Sanho Chemical Co., Ltd. | Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications...展开 Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications. 收起 | |
| Fujicure 5300 | Sanho Chemical Co., Ltd. | Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-...展开 Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-leveling coating formulation applications. 收起 | |
| Fujicure 5420 | Sanho Chemical Co., Ltd. | Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive f...展开 Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Fujicure FX-220 | Sanho Chemical Co., Ltd. | Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adh...展开 Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adhesive formulation applications. 收起 | |
| Fujicure FXD-821 | Sanho Chemical Co., Ltd. | Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesiv...展开 Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesive formulation applications. 收起 | |
| Fujicure FXD-822 | Sanho Chemical Co., Ltd. | Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and m...展开 Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and mortar formulation applications. 收起 | |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展开 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
| IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展开 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
| IMICURE® AMI-2T Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-2T Curing Agent is an elevated temperature curing agent for epoxy systems. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accel...展开 IMICURE® AMI-2T Curing Agent is an elevated temperature curing agent for epoxy systems. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. It is ideal for use in electrical laminates, adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
| IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | 高反应活性、中等粘度液体咪唑，单独使用或用于催化双氰胺或酸酐固化。可应用于灯丝电源绕组、电子层合材料、模塑粉末、单组分胶粘剂和结构胶 | Request Sample |
| IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展开 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起 | Request Sample |
| Kingcure 2040-MS | Sanho Chemical Co., Ltd. | Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation appli...展开 Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation applications. 收起 | |
| Kingcure 515-KD | Sanho Chemical Co., Ltd. | Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adh...展开 Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adhesive formulation applications. 收起 | |
| Kingcure 613-B | Sanho Chemical Co., Ltd. | Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applicati...展开 Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applications. 收起 | |
| Kingcure 800-C | Sanho Chemical Co., Ltd. | Kingcure 800-C is a mercaptan terminated polymer in a light yellow-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingcure 800-C is most commonly used in construction adhesive formulation applications. | |
| Kingcure 800-F | Sanho Chemical Co., Ltd. | Kingcure 800-F is a mercaptan terminated polymer in a light yellow-colored liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s. Kingcure 800-F is most commonly used in construction adhesive formulation applications. | |
| Kingcure 800-S | Sanho Chemical Co., Ltd. | Kingcure 800-S is a mercaptan terminated polymer in a light yellow-colored viscous liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure 800-S is most commonly used in mortar and fa...展开 Kingcure 800-S is a mercaptan terminated polymer in a light yellow-colored viscous liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure 800-S is most commonly used in mortar and fast-setting adhesive formulation applications. 收起 | |
| Kingcure 925 | Sanho Chemical Co., Ltd. | Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adh...展开 Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adhesive, and coating formulation applications. 收起 | |
| Kingcure A-611 | Sanho Chemical Co., Ltd. | Kingcure A-611 is a modified aliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 13-25 mPa.s and a specific gravity of 1.09. Kingcure A-611 is most commonly used in adhesive formulation applications. | |
| Kingcure B-311 | Sanho Chemical Co., Ltd. | Kingcure B-311 is a low viscosity, modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 300-700 mPa.s. Kingcure B-311 is most commonly used in solvent-free coating formulation applicat...展开 Kingcure B-311 is a low viscosity, modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 300-700 mPa.s. Kingcure B-311 is most commonly used in solvent-free coating formulation applications. 收起 | |
| Kingcure B-312 | Sanho Chemical Co., Ltd. | Kingcure B-312 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 30 mPa.s. Kingcure B-312 is most commonly used in solvent-free coating and adhesive formulation applications. | |
| Kingcure D-211 | Sanho Chemical Co., Ltd. | Kingcure D-211 is a modified aliphatic polyamine epoxy curing agent in an amber-colored liquid form. This product has a viscosity of 50-150 mPa.s. Kingcure D-211 is most commonly used in coating and adhesive formulation applications. | |
| Kingcure I-621 | Sanho Chemical Co., Ltd. | Kingcure I-621 is a modified cycloaliphatic diamine in a slightly yellow-colored viscous liquid form. This product has a viscosity of 1500-2500 mPa.s and a specific gravity of 1.02. Kingcure I-621 is most commonly used in coating formulation applications. | |
| Kingcure I-631 | Sanho Chemical Co., Ltd. | Kingcure I-631 is a modified cycloaliphatic diamine in a light yellow-colored viscous liquid form. This product has a viscosity of 70-170 mPa.s and a specific gravity of 1.03. Kingcure I-631 is most commonly used in concrete adhesive formulation applicati...展开 Kingcure I-631 is a modified cycloaliphatic diamine in a light yellow-colored viscous liquid form. This product has a viscosity of 70-170 mPa.s and a specific gravity of 1.03. Kingcure I-631 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Kingcure I-934 | Sanho Chemical Co., Ltd. | Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and ...展开 Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and adhesive formulation applications. 收起 | |
| Kingcure K-11 | Sanho Chemical Co., Ltd. | Kingcure K-11 is an accelerated aliphatic amine curing agent in an amber-colored liquid form. This product has a viscosity of 700-2400 mPa.s and a specific gravity of 1.04. Kingcure K-11 is most commonly used in adhesive formulation applications. | |
| Kingcure K-863A | Sanho Chemical Co., Ltd. | Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applica...展开 Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applications. 收起 | |
| Kingcure M-510BS | Sanho Chemical Co., Ltd. | Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation ap...展开 Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation applications. 收起 | |
| Kingcure M-530 | Sanho Chemical Co., Ltd. | Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applic...展开 Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applications. 收起 | |
| Kingcure N-768 | Sanho Chemical Co., Ltd. | Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation app...展开 Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation applications. 收起 | |
| Kingcure N-784 | Sanho Chemical Co., Ltd. | Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, l...展开 Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, laminate, and adhesive formulation applications. 收起 | |
| Kingcure T-642NA | Sanho Chemical Co., Ltd. | Kingcure T-642NA is a modified aliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of less than 80 mPa.s. Kingcure T-642NA is most commonly used in coating and adhesive formulation applications. | |
| Kingcure X-165A | Sanho Chemical Co., Ltd. | Kingcure X-165A is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 50-150 mPa.s and a specific gravity of 1.11. Kingcure X-165A is most commonly used in solvent-free coating formulat...展开 Kingcure X-165A is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 50-150 mPa.s and a specific gravity of 1.11. Kingcure X-165A is most commonly used in solvent-free coating formulation applications. 收起 | |
| Kingcure X-2001 | Sanho Chemical Co., Ltd. | Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation application...展开 Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Kingmide 305 | Sanho Chemical Co., Ltd. | Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applicat...展开 Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applications. 收起 | |
| Kingmide 310 | Sanho Chemical Co., Ltd. | Kingmide 310 is a high molecular weight, high viscosity, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 30,000-50,000 mPa.s and a specific gravity of 0.97. Kingmide 310 is most commonly used in adhesive a...展开 Kingmide 310 is a high molecular weight, high viscosity, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 30,000-50,000 mPa.s and a specific gravity of 0.97. Kingmide 310 is most commonly used in adhesive and coating formulation applications. 收起 | |
| Kingmide 315 | Sanho Chemical Co., Ltd. | Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formula...展开 Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formulation applications. 收起 | |
| Kingmide 315-FC | Sanho Chemical Co., Ltd. | Kingmide 315-FC is a polyaminoamide-type curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 315-FC is most commonly used in adhesive formulation applications. | |
| Kingmide 315-FS | Sanho Chemical Co., Ltd. | Kingmide 315-FS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-15,000 mPa.s. Kingmide 315-FS is most commonly used in adhesive formulation applications. | |
| Kingmide 315-L | Sanho Chemical Co., Ltd. | Kingmide 315-L is a polyaminoamide-type curing agent in a brown-colored viscous liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.97. Kingmide 315-L is most commonly used in adhesive, sealant, surface coating, and pu...展开 Kingmide 315-L is a polyaminoamide-type curing agent in a brown-colored viscous liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.97. Kingmide 315-L is most commonly used in adhesive, sealant, surface coating, and putty formulation applications. 收起 | |
| Kingmide 315-S | Sanho Chemical Co., Ltd. | Kingmide 315-S is a high viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315-S is most commonly used in adhesive and high-solids anti-co...展开 Kingmide 315-S is a high viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315-S is most commonly used in adhesive and high-solids anti-corrosive coating formulation applications. 收起 | |
| Kingmide 326-A | Sanho Chemical Co., Ltd. | Kingmide 326-A is a polyaminoamide curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-16,000 mPa.s. Kingmide 326-A is most commonly used in adhesive formulation applications. | |
| Kingmide 328-A | Sanho Chemical Co., Ltd. | Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation application...展开 Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation applications. 收起 | |
| Kingmide 334 | Sanho Chemical Co., Ltd. | Kingmide 334 is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s and a specific gravity of 0.96. Kingmide 334 is most commonly used in adhesive formulation applications. | |
| Kingmide 338 | Sanho Chemical Co., Ltd. | Kingmide 338 is a low-viscosity, ractive polyamide resin in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s and a specific gravity of 0.97. Kingmide 338 is most commonly used in adhesive and putty formulation ap...展开 Kingmide 338 is a low-viscosity, ractive polyamide resin in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s and a specific gravity of 0.97. Kingmide 338 is most commonly used in adhesive and putty formulation applications. 收起 | |
| Kingmide 340 | Sanho Chemical Co., Ltd. | Kingmide 340 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 400-600 mPa.s and a specific gravity of 0.96. Kingmide 340 is most commonly used in coating, mortar, adhesive, and putty form...展开 Kingmide 340 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 400-600 mPa.s and a specific gravity of 0.96. Kingmide 340 is most commonly used in coating, mortar, adhesive, and putty formulation applications. 收起 | |
| Kingmide 370 | Sanho Chemical Co., Ltd. | Kingmide 370 is a medium-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 2500-4500 mPa.s and a specific gravity of 0.95. Kingmide 370 is most commonly used in adhesive and putty formulation appli...展开 Kingmide 370 is a medium-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 2500-4500 mPa.s and a specific gravity of 0.95. Kingmide 370 is most commonly used in adhesive and putty formulation applications. 收起 | |
| Kingmide 374-L | Sanho Chemical Co., Ltd. | Kingmide 374-L is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.95. Kingmide 374-L is most commonly used in mortar, adhesive, and putty formulati...展开 Kingmide 374-L is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.95. Kingmide 374-L is most commonly used in mortar, adhesive, and putty formulation applications. 收起 | |
| Kingmide 384-S | Sanho Chemical Co., Ltd. | Kingmide 384-S is a modified polyaminoamide epoxy adduct curing agent in a brown-colored viscous liquid form. This product has a viscosity of 7000-10,000 mPa.s. Kingmide 384-S is most commonly used in adhesive formulation applications. | |
| Kingmide 507-KS | Sanho Chemical Co., Ltd. | Kingmide 507-KS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 507-KS is most commonly used in adhesive formulation applications. | |
| Kingmide 513-F | Sanho Chemical Co., Ltd. | Kingmide 513-F is a poly amide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingmide 513-F is most commonly used in adhesive formulation applications. | |
| Kingmide 533 | Sanho Chemical Co., Ltd. | Kingmide 533 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 100-110°C. Kingmide 533 is most commonly used in flexographic printing ink formulation applications. | |
| Kingmide 550-A | Sanho Chemical Co., Ltd. | Kingmide 550-A is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550-A is most commonly used in hot-melt adhesive formulation applications. | |
| Kingmide 550-G | Sanho Chemical Co., Ltd. | Kingmide 550-G is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550-G is most commonly used in hot-melt adhesive formulation applications. | |
| Kingmide 551 | Sanho Chemical Co., Ltd. | Kingmide 551 is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C and an application temperature of 150-180°C. Kingmide 551 is most commonly used in hot-melt adhesive formulation applica...展开 Kingmide 551 is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C and an application temperature of 150-180°C. Kingmide 551 is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide 701 | Sanho Chemical Co., Ltd. | Kingmide 701 is a modified aliphatic amidoamine curing agent in an amber liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.98. Kingmide 701 is most commonly used in adhesive formulation applications. | |
| Kingmide 705 | Sanho Chemical Co., Ltd. | Kingmide 705 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 150-400 mPa.s and a specific gravity of 0.98. Kingmide 705 is most commonly used in mortar, putty, and adhesive formulation a...展开 Kingmide 705 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 150-400 mPa.s and a specific gravity of 0.98. Kingmide 705 is most commonly used in mortar, putty, and adhesive formulation applications. 收起 | |
| Kingmide 710-SS | Sanho Chemical Co., Ltd. | Kingmide 710-SS is a modified aliphatic amidoamine curing agent. This product has a viscosity of 150-500 mPa.s and a specific gravity of 0.99. Kingmide 710-SS is most commonly used in mortar and adhesive formulation applications. | |
| Kingmide 715-A | Sanho Chemical Co., Ltd. | Kingmide 715-A is a medium viscosity, modified polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s. Kingmide 715-A is most commonly used in putty and adhesive formulation applications. | |
| Kingmide 74 | Sanho Chemical Co., Ltd. | Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation app...展开 Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation applications. 收起 | |
| Kingmide 74-KB | Sanho Chemical Co., Ltd. | Kingmide 74-KB is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Kingmide 74-KB is most commonly used in putty and adhesive for...展开 Kingmide 74-KB is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Kingmide 74-KB is most commonly used in putty and adhesive formulation applications. 收起 | |
| Kingmide 74-NP | Sanho Chemical Co., Ltd. | Kingmide 74-NP is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.96. Kingmide 74-NP is most commonly used in putty and adhesive form...展开 Kingmide 74-NP is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.96. Kingmide 74-NP is most commonly used in putty and adhesive formulation applications. 收起 | |
| Kingmide H-110 | Sanho Chemical Co., Ltd. | Kingmide H-110 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 500-1000 mPa.s and a softening point of 105-115°C. Kingmide H-110 is most commonly used in hot-melt adhesive formulation application...展开 Kingmide H-110 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 500-1000 mPa.s and a softening point of 105-115°C. Kingmide H-110 is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide H-120 | Sanho Chemical Co., Ltd. | Kingmide H-120 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2200-2800 mPa.s and a softening point of 115-125°C. Kingmide H-120 is most commonly used in hot-melt adhesive formulation applicatio...展开 Kingmide H-120 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2200-2800 mPa.s and a softening point of 115-125°C. Kingmide H-120 is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide H-130 | Sanho Chemical Co., Ltd. | Kingmide H-130 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2000-4000 mPa.s and a softening point of 125-135°C. Kingmide H-130 is most commonly used in hot-melt adhesive formulation applicatio...展开 Kingmide H-130 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2000-4000 mPa.s and a softening point of 125-135°C. Kingmide H-130 is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide H-130W | Sanho Chemical Co., Ltd. | Kingmide H-130W is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2500-5000 mPa.s and a softening point of 125-135°C. Kingmide H-130W is most commonly used in hot-melt adhesive formulation applicat...展开 Kingmide H-130W is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2500-5000 mPa.s and a softening point of 125-135°C. Kingmide H-130W is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide H-140HP | Sanho Chemical Co., Ltd. | Kingmide H-140HP is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 5000-10,000 mPa.s and a softening point of 140-150°C. Kingmide H-140HP is most commonly used in hot-melt adhesive formulation appl...展开 Kingmide H-140HP is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 5000-10,000 mPa.s and a softening point of 140-150°C. Kingmide H-140HP is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide H-170HV | Sanho Chemical Co., Ltd. | Kingmide H-170HV is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 3000-7000 mPa.s and a softening point of 165-175°C. Kingmide H-170HV is most commonly used in hot-melt adhesive formulation applic...展开 Kingmide H-170HV is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 3000-7000 mPa.s and a softening point of 165-175°C. Kingmide H-170HV is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide X-2100 | Sanho Chemical Co., Ltd. | Kingmide X-2100 is a medium viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 6000-12,000 mPa.s and a specific gravity of 1.04. Kingmide X-2100 is most commonly used in adhesive, coating, ...展开 Kingmide X-2100 is a medium viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 6000-12,000 mPa.s and a specific gravity of 1.04. Kingmide X-2100 is most commonly used in adhesive, coating, and putty formulation applications. 收起 | |
| Kingmide X-220B | Sanho Chemical Co., Ltd. | Kingmide X-220B is a low viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s. Kingmide X-220B is most commonly used in adhesive, coating, and patch repair mortar formulation ap...展开 Kingmide X-220B is a low viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s. Kingmide X-220B is most commonly used in adhesive, coating, and patch repair mortar formulation applications. 收起 | |
| NOURYBOND® 289 Adhesion Promoter | Evonik Operations GmbH, BL Crosslinkers | 封闭型异氰酸酯PVC塑料溶胶附着力促进剂，适用于汽车密封剂，应用于可见区域和抗裂底漆 | Request Sample |
| Tohmide 1310 | Sanho Chemical Co., Ltd. | Tohmide 1310 is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 1500-4500 mPa.s and a softening point of 115-125°C. Tohmide 1310 is most commonly used in hot-melt adhesive formulation applications. | |
| Tohmide 1360 | Sanho Chemical Co., Ltd. | Tohmide 1360 is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 1500-4500 mPa.s and a softening point of 165-175°C. Tohmide 1360 is most commonly used in hot-melt adhesive formulation applications. | |
| Tohmide 225-R | Sanho Chemical Co., Ltd. | Tohmide 225-R is a medium viscosity, reactive polyaminoamide in a brown-colored viscous liquid form. This product has a viscosity of 3500-10,000 mPa.s and a specific gravity of 0.97. Tohmide 225-R is most commonly used in adhesive, sealant, putty, and sur...展开 Tohmide 225-R is a medium viscosity, reactive polyaminoamide in a brown-colored viscous liquid form. This product has a viscosity of 3500-10,000 mPa.s and a specific gravity of 0.97. Tohmide 225-R is most commonly used in adhesive, sealant, putty, and surface coating formulation applications. 收起 | |
| Tohmide 225-X | Sanho Chemical Co., Ltd. | Tohmide 225-X is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-X is most commonly used in adhesive, sealant, and surface coati...展开 Tohmide 225-X is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-X is most commonly used in adhesive, sealant, and surface coating formulation applications. 收起 | |
| Tohmide 225-XX | Sanho Chemical Co., Ltd. | Tohmide 225-XX is a polyaminoamide-type epoxy curing agent with a longer pot life in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-XX is most commonly used in adhesive, s...展开 Tohmide 225-XX is a polyaminoamide-type epoxy curing agent with a longer pot life in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-XX is most commonly used in adhesive, sealant, and surface coating formulation applications. 收起 | |
| Tohmide 235-A | Sanho Chemical Co., Ltd. | Tohmide 235-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-18,000 mPa.s and a specific gravity of 0.97. TOHMIDE 235-A is most commonly used in structural adhesive and grout formul...展开 Tohmide 235-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-18,000 mPa.s and a specific gravity of 0.97. TOHMIDE 235-A is most commonly used in structural adhesive and grout formulation applications. 收起 | |
| Tohmide 235-S | Sanho Chemical Co., Ltd. | Tohmide 235-S is a medium viscosity, polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 4500-9000 mPa.s and a specific gravity of 0.97. Tohmide 235-S is most commonly used in structural adhesive ...展开 Tohmide 235-S is a medium viscosity, polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 4500-9000 mPa.s and a specific gravity of 0.97. Tohmide 235-S is most commonly used in structural adhesive and grout formulation applications. 收起 | |
| Tohmide 2400 | Sanho Chemical Co., Ltd. | Tohmide 2400 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 2500-5000 mPa.s and a specific gravity of 0.97. Tohmide 2400 is most commonly used in medium heat adhesive formulation app...展开 Tohmide 2400 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 2500-5000 mPa.s and a specific gravity of 0.97. Tohmide 2400 is most commonly used in medium heat adhesive formulation applications. 收起 | |
| Tohmide 245 | Sanho Chemical Co., Ltd. | Tohmide 245 is a polyaminoamide-type epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.96. Tohmide 245 is most commonly used in bonding, sealing, and resin mortar formulation app...展开 Tohmide 245 is a polyaminoamide-type epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.96. Tohmide 245 is most commonly used in bonding, sealing, and resin mortar formulation applications. 收起 | |
| Tohmide 245-HS | Sanho Chemical Co., Ltd. | Tohmide 245-HS is a very low viscosity, fatty polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 800-1100 cPs. Tohmide 245-HS is most commonly used in structural adhesive and protective coating formulation applications...展开 Tohmide 245-HS is a very low viscosity, fatty polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 800-1100 cPs. Tohmide 245-HS is most commonly used in structural adhesive and protective coating formulation applications. 收起 | |
| Tohmide 245-LP | Sanho Chemical Co., Ltd. | Tohmide 245-LP is a low viscosity, polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 0.90. Tohmide 245-LP is most commonly used in structural adhesive and protective c...展开 Tohmide 245-LP is a low viscosity, polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 0.90. Tohmide 245-LP is most commonly used in structural adhesive and protective coating formulation applications. 收起 |
