| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| HR-A5100 | Zhejiang Chembest United Industrial Co., Ltd. | HR-A5100, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ...展开 HR-A5100, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起 | |
| HR-A5101 | Zhejiang Chembest United Industrial Co., Ltd. | HR-A5101, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ho...展开 HR-A5101, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起 | |
| HR-A5110 | Zhejiang Chembest United Industrial Co., Ltd. | HR-A5110, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ho...展开 HR-A5110, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起 | |
| HR-A5120 | Zhejiang Chembest United Industrial Co., Ltd. | HR-A5120, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ho...展开 HR-A5120, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起 | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展开 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起 | |
| Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
| Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...展开 Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. 收起 | |
| Ketjenflex® 9S | Axcentive Sarl | Ketjenflex® 9S is a toluene sulfonamide in the form of white crystalline powder. It is used as a reactive plasticizer in coatings and adhesives and provides fungicidal activity in coatings. Ketjenflex® 9S can be used in melamine laminates and coatings, wo...展开 Ketjenflex® 9S is a toluene sulfonamide in the form of white crystalline powder. It is used as a reactive plasticizer in coatings and adhesives and provides fungicidal activity in coatings. Ketjenflex® 9S can be used in melamine laminates and coatings, wood adhesives, epoxy and polyurethane coatings and adhesives, and other applications. 收起 | |
| Ketjenflex® CP | Axcentive Sarl | Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings. | |
| Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...展开 Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. 收起 | |
| Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...展开 Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. 收起 |
