| 1, 2-Bis(triethoxysilyl)ethane | Qufu Wanda Chemical Industry Co., Ltd. | 1, 2-Bis(triethoxysilyl)ethane is a colorless clear liquid that can be used as an adhesion promoter, as an additive to silane coupling agent formulations and enhance hydrolytic stability and in corrosion resistant coating/primers for steel and aluminum. | |
| 1, 2-Bis(trimethoxysilyl)ethane | Qufu Wanda Chemical Industry Co., Ltd. | 1, 2-Bis(trimethoxysilyl)ethane is a colorless clear liquid that can be used as an adhesion promoter in RTV silicone sealants enhancing the adhesion to the dry or wet surfaces forming a strong and weather resistance bond. This product also has six hydrol...展开 1, 2-Bis(trimethoxysilyl)ethane is a colorless clear liquid that can be used as an adhesion promoter in RTV silicone sealants enhancing the adhesion to the dry or wet surfaces forming a strong and weather resistance bond. This product also has six hydrolysable groups and is believed to be more cross-linked than tri and tetra-functional analogs leading to better barrier properties in anti-corrosion applications. 收起 | |
| 1-[3-(Trimethoxysilyl)propyl]urea | Qufu Wanda Chemical Industry Co., Ltd. | 1-[3-(Trimethoxysilyl)propyl]urea is a colorless transparent liquid that can be used to improve adhesion between the inorganic filler or fiber and a polymer. This product can be applied to glass fiber sizes and finishes, wool insulation resin binders, nu...展开 1-[3-(Trimethoxysilyl)propyl]urea is a colorless transparent liquid that can be used to improve adhesion between the inorganic filler or fiber and a polymer. This product can be applied to glass fiber sizes and finishes, wool insulation resin binders, numerous primers, foundry sand binders, adhesives, sealants and abrasive grinding wheel binders 收起 | |
| 1,1,3,3-Tetramethyldisiloxane | Qufu Wanda Chemical Industry Co., Ltd. | 1,1,3,3-Tetramethyldisiloxane is a colorless transparent liquid used in a wide range of applications. Some of these applications include as a silane coupling agent, adhesion promoter, hydrophobing agent, dispersing agent and silane cross-linking agent. | |
| 1488 VT/OIL Copolymer Resin | Gabriel Performance Products | 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evapora...展开 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). 收起 | |
| 2-(3,4-Epoxycyclohexyl)ethyltriethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | 2-(3,4-Epoxycyclohexyl)ethyltriethoxysilane is a colorless transparent liquid that can be used as a finish or a size ingredient. It is an additive to polymers and an additive or primer for improving adhesion to the substrate of products such as glass and ...展开 2-(3,4-Epoxycyclohexyl)ethyltriethoxysilane is a colorless transparent liquid that can be used as a finish or a size ingredient. It is an additive to polymers and an additive or primer for improving adhesion to the substrate of products such as glass and metal. 收起 | |
| 3-[2-(2-Aminoethylamino)ethylamino]propyl-trimethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | 3-[2-(2-Aminoethylamino)ethylamino]propyl-trimethoxysilane is a colorless transparent liquid used a primer or additive and for chemical modification in sealants and adhesives. It can also be used in paints and coatings as an additive and primer for impro...展开 3-[2-(2-Aminoethylamino)ethylamino]propyl-trimethoxysilane is a colorless transparent liquid used a primer or additive and for chemical modification in sealants and adhesives. It can also be used in paints and coatings as an additive and primer for improving adhesion to the substrate. 收起 | |
| 3-(2-Aminoethylamino)propyl-dimethoxymethylsilane | Qufu Wanda Chemical Industry Co., Ltd. | 3-(2-Aminoethylamino)propyl-dimethoxymethylsilane is a colorless to light yellow transparent liquid that can be used as a dispersion agent for suspensions of coatings. | |
| 3-Aminopropylmethyldiethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | 3-Aminopropylmethyldiethoxysilane is a colorless transparent liquid that can be used in sand casting of resin to strengthen the adhesion and elastic resilience among other benefits. It is also used as an adhesion improver in polyamide, epoxy, nitrile, ph...展开 3-Aminopropylmethyldiethoxysilane is a colorless transparent liquid that can be used in sand casting of resin to strengthen the adhesion and elastic resilience among other benefits. It is also used as an adhesion improver in polyamide, epoxy, nitrile, phenol aldehyde adhesive and sealed material to assist the dispersion of pigment and the adhesion to glass, aluminum and iron. In addition, it is applicable for latex coating such as polyamide, epoxy and acrylic acid type 收起 | |
| 3-(Diethoxymethylsilyl)propyl Methacrylate | Qufu Wanda Chemical Industry Co., Ltd. | 3-(Diethoxymethylsilyl)propyl Methacrylate is a colorless transparent liquid that can be used as a cross-link of acrylic type resins improving adhesion and durability of adhesives and coatings. | |
| (3-Glycidoxypropyl)methyldiethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | (3-Glycidoxypropyl)methyldiethoxysilane is a colorless transparent liquid that can be used as an automotive laminate, furniture laminate or flocking adhesive. This product benefits from a silane cross-linked water stable single component system that redu...展开 (3-Glycidoxypropyl)methyldiethoxysilane is a colorless transparent liquid that can be used as an automotive laminate, furniture laminate or flocking adhesive. This product benefits from a silane cross-linked water stable single component system that reduces scrap, improves process efficiency and reduces cross-linker toxicity. It can also be used as an adhesion promoter for waterborne system such as acrylic sealant. 收起 | |
| 3-glycidoxypropylmethyldimethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | 3-glycidoxypropylmethyldimethoxysilane is a colorless transparent liquid used as an adhesion promoter or crosslinker. It is used as a water stable single component crosslinker in automotive laminate adhesives, furniture laminate adhesives and flocking ad...展开 3-glycidoxypropylmethyldimethoxysilane is a colorless transparent liquid used as an adhesion promoter or crosslinker. It is used as a water stable single component crosslinker in automotive laminate adhesives, furniture laminate adhesives and flocking adhesives. As an adhesion promoter, it is used for waterborne systems such as acrylic sealant, offering consistent and dramatic improvements in water stable adhesion performance. 收起 | |
| 3-Glycidoxypropyltrimethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | 3-Glycidoxypropyltrimethoxysilane is a colorless transparent liquid that can be used as an adhesion between the surface of organic and inorganic materials including the treatment of glass fibers and silicon fillers in plastic, rubber and painting. It is ...展开 3-Glycidoxypropyltrimethoxysilane is a colorless transparent liquid that can be used as an adhesion between the surface of organic and inorganic materials including the treatment of glass fibers and silicon fillers in plastic, rubber and painting. It is also suitable for other various adhesives and as a sealing agent in silica, epoxy concrete remedy material and coating to stuff sand and epoxy mould material used to stuff metal. 收起 | |
| 3-(Triethoxysilyl)propyl methacrylate | Qufu Wanda Chemical Industry Co., Ltd. | 3-(Triethoxysilyl)propyl methacrylate is a colorless transparent liquid that can be used a cross-link to acrylic type resins improving adhesion and durability of adhesives and coating. | |
| 4070-M-60 L/S Alkyd Resin | Gabriel Performance Products | 4070-M-60 L/S Alkyd Resin conforms to Federal Specification TT-R-266D, Type I, Class B. It is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery paints. | |
| 4070-M-70 ALKYD RESIN | Gabriel Performance Products | 4070-M-70 ALKYD RESIN is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery primers/enamels. This product conforms to Federal Specification TT-R-26D, Type I, Class A. | |
| 4412-M-50 M/S Alkyd Resin | Gabriel Performance Products | 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cu...展开 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cured with U-F or melamine resins with excellent results. 收起 | |
| 4412-V-50 Alkyd Resin | Gabriel Performance Products | 4412-V-50 Alkyd Resin is a medium oil alkyd resin for interior or exterior use. It is suitable for air drying or baking coatings. | |
| 4489-M-60 Long Oil Silicone Modified Alkyd Resin | Gabriel Performance Products | 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include ...展开 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include machinery, freight cars, metal drums, signs, railings, metal doors and siding and metal structures. 4489-M-60 may also be used to make TT-E-490E enamels. 收起 | |
| 4646-X-50 Epoxy Ester | Gabriel Performance Products | 4646-X-50 Epoxy Ester is a versatile epoxy ester resin which gives fast air drying enamels and primers excellent adhesion. 4646-X-50 can be cross linked with melamines for chemical and corrosion resistant finishes. | |
| 4653-V-50 Rosin Modified Alkyd | Gabriel Performance Products | 4653-V-50 Rosin Modified Alkyd is a fast drying rosin modified alkyd supplied at 50% non-volatile in VM&P Naphtha. This product can be used for fast drying, low cost enamels and primers. | |
| 4702-X-50 Chain Stopped Alkyd Resin | Gabriel Performance Products | 4702-X-50 Chain Stopped Alkyd Resin is based on low rosin, tall oil fatty acids. This resin gives rapid set and tack free times in air dry systems. | |
| 4714-P-75 Chain Stopped Water Soluble Alkyd Resin | Gabriel Performance Products | 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solve...展开 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solvent ratio in finished product should be 80:20 ratio of water to co-solvent by volume. 收起 | |
| 4724-XT-80 High Solids VT Alkyd Copolymer Resin | Gabriel Performance Products | 4724-XT-80 High Solids VT Alkyd Copolymer Resin is supplied at 80% non- volatile in a blend of xylene and toluene. The resin exhibits rapid dry, good toughness, and hardness. It is intended for use in fast drying industrial finishes with low VOCs. | |
| 4731-X-80 High Solids Polyester Resin | Gabriel Performance Products | 4731-X-80 High Solids Polyester Resin is a low molecular weight, oil free polyester resin designed to be cross linked with melamine type resins in high solids baking enamels. | |
| 4770-X-60 Short Oil Alkyd Resin | Gabriel Performance Products | 4770-X-60 Short Oil Alkyd Resin is a non-drying short oil alkyd resin containing coconut oil. Typical uses include plasticizer for nitrocellulose lacquers, and high quality low yellowing baking enamels with excellent durability. | |
| 4778-X-50 Phenolic/rosin Modified Alkyd Resin | Gabriel Performance Products | 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used ...展开 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used in the following government specification finishes: TT-P-64C, TT- E-515A, and MIL-E-15090C, Type II. 收起 | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...展开 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. 收起 | |
| 4892-SD-50 Epoxy Ester | Gabriel Performance Products | 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enam...展开 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enamels. 收起 | |
| 4915-PMA-85 High Solids Short Oil Alkyd | Gabriel Performance Products | 4915-PMA-85 High Solids Short Oil Alkyd which is cut to 85% non-volatile in PM Acetate Solvent. This resin has good cure response with melamine/butylated melamine type resins and offers a fast reduction curve in aromatic and oxygenated solvents. | |
| 4929-X-50 Silicone Modified Short Oil Alkyd | Gabriel Performance Products | 4929-X-50 Silicone Modified Short Oil Alkyd is a fast air dry silicone modified alkyd for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. | |
| 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd | Gabriel Performance Products | 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd based on tall oil. It is recommended for high solids industrial enamels and primers. This resin has an extremely fast set time and rate of through dry. | |
| 4947-SP-75 Water Reducible Alkyd | Gabriel Performance Products | 4947-SP-75 Water Reducible Alkyd is designed for air dry, force dry, or low bake application. This resin is for use in all colors including whites and pastels, and also in primers. It will give good corrosion and water resistance when properly formulated. | |
| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...展开 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. 收起 | |
| 4965-XMP-80 High Solids Silicone Modified Short Oil | Gabriel Performance Products | 4965-XMP-80 High Solids Silicone Modified Short Oil is an air dry silicone modified alkyd resin intended for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. This product offers excellen...展开 4965-XMP-80 High Solids Silicone Modified Short Oil is an air dry silicone modified alkyd resin intended for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. This product offers excellent adhesion to most metal surfaces. 收起 | |
| 4971-BC-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank...展开 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank, flow coat, and spray applications. 收起 | |
| 4983-BA-70 High Solids Epoxy Ester Resin | Gabriel Performance Products | 4983-BA-70 High Solids Epoxy Ester Resin gives rapid set to touch and tack free times. Very good adhesion to metal surfaces and good chemical resistance. | |
| 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil | Gabriel Performance Products | 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil can be used for air dry, force dry, and baking applications and is intended for industrial and OEM coatings. | |
| 4986-V-50 VT Modified Alkyd Resin | Gabriel Performance Products | 4986-V-50 VT Modified Alkyd Resin is a fast drying general purpose alkyd resin which features a slow solvent reduction curve. Typical uses include drum enamels, aerosol finishes, and fast drying trade sale enamels. | |
| 4987-V-60VT Modified Alkyd Resin | Gabriel Performance Products | 4987-V-60VT Modified Alkyd Resin is a fast drying vinyl toluene modified alkyd resin intended for use in fast drying primers and enamels. Its adhesion and flexibility are very good and it can be used on a variety of surfaces including wood and metal. | |
| 4996 Long Oil Alkyd Resin | Gabriel Performance Products | 4996 Long Oil Alkyd Resin is intended for use as a plasticizer for hot melt coatings. | |
| 4997-X-50 Epoxy Ester Resin | Gabriel Performance Products | 4997-X-50 Epoxy Ester Resin is formulated to resist discoloration when exposed to heat. | |
| 5009-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5009-BS-70 Water Reducible Alkyd Resin is a general purpose resin designed for air dry, force dry, or low temperature bake applications. This product is supplied at 70% non-volatiles. | |
| 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and...展开 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and good gloss retention. 收起 | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| 5018-X-50 Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retenti...展开 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retention. 收起 | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5063-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film...展开 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film properties at the same time. 收起 | |
| 5075-BS-85 Water Reducible Saturated Polyester Resin | Gabriel Performance Products | 5075-BS-85 Water Reducible Saturated Polyester Resin is a fast curing water reducible polyester resin intended for industrial and OEM finishes. | |
| 5113-V-60 Medium Oil Alkyd | Gabriel Performance Products | 5113-V-60 Medium Oil Alkyd is suitable for use in traffic and road marking paints. | |
| 5121-BC-85 Water Reducible Alkyd Resin | Gabriel Performance Products | 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an ...展开 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an 80:20 ratio of water to co-solvent. For a baking coating, 12-30% of a melamine resin can be used for cross-linking. Co-solvent and/or melamines and neutralizer should be added to the resin and mixed completely before the addition of water. 收起 | |
| Bis(triethoxysilylpropyl)tetrasulfide | Qufu Wanda Chemical Industry Co., Ltd. | Bis(triethoxysilylpropyl)tetrasulfide is yellowish clear liquid that is soluble in primary alcohols, ketones, benzene, toluene, chlorinated hydtocarbons, acetonitrile, dimethylfomaminde and dimethysulfoxide, but insoluble in water. It is used in the rubb...展开 Bis(triethoxysilylpropyl)tetrasulfide is yellowish clear liquid that is soluble in primary alcohols, ketones, benzene, toluene, chlorinated hydtocarbons, acetonitrile, dimethylfomaminde and dimethysulfoxide, but insoluble in water. It is used in the rubber industry for improved modulus and tensile strength and reducing compound viscosity to save energy consumption during processing. This product can be used in a variety of rubbers. 收起 | |
| Bis(trimethoxysilylpropyl)amine | Qufu Wanda Chemical Industry Co., Ltd. | Bis(trimethoxysilylpropyl)amine is a colorless transparent liquid used as an additive to phenolic resin binderies and primers for improving adhesion to the substrate. | |
| Butyltrimethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | Butyltrimethoxysilane is a colorless clear liquid that can be used as silane coupling agent, silane adhesion promoter and a silane crosslinking agent. | |
| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| CAPCURE® 3-800 | Gabriel Performance Products | CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in ...展开 CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. 收起 | |
| CAPCURE® 3830-81 | Gabriel Performance Products | CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine an...展开 CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. 收起 | |
| CAPCURE® 3830-CB | Gabriel Performance Products | CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves ...展开 CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves bonds between glass and metal, especially brass and bronze. This material is ideal for two-component mixing equipment in assembly line use when mixed at a 1:1 epoxy/hardener ratio. CAPCURE® 3830-CB can be used as a catalyst or co-curing material where it will impart properties typical of mercaptans and provide improved adhesion. 收起 | |
| CAPCURE® 3850-101 | Gabriel Performance Products | CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine ...展开 CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. 收起 | |
| Chloromethyltriethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | Chloromethyltriethoxysilane is a colorless transparent liquid. It is used as a freezing agent of silicon sulfide rubber at normal temperatures and as an intermediate in silane couple agents. This product may also be used as a coupling agent to improve adh...展开 Chloromethyltriethoxysilane is a colorless transparent liquid. It is used as a freezing agent of silicon sulfide rubber at normal temperatures and as an intermediate in silane couple agents. This product may also be used as a coupling agent to improve adhesion of organic resins to inorganic surfaces. 收起 | |
| Chloromethyltrimethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | Chloromethyltrimethoxysilane is a colorless transparent liquid used as a coupling agent to improve adhesion or organic resin to inorganic surfaces. It is also used as an intermediate for other functional organosilanes. | |
| Dimer Acid | Anhui Elite Industrial Co., Ltd | Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起 | |
| Dimethyldichlorosilane | Qufu Wanda Chemical Industry Co., Ltd. | Dimethyldichlorosilane is a colorless transparent liquid is used as coating for silicon and glass surfaces, and in the production of silicone polymers. This product contains chlorine atoms which can produce a more rubbery polymer. | |
| Dodecyltrichlorosilane | Qufu Wanda Chemical Industry Co., Ltd. | Dodecyltrichlorosilane is a colorless transparent liquid used as a coating for silicon and glass surfaces, and in the production of silicone polymers. | |
| Dodecyltriethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | Dodecyltriethoxysilane is a colorless transparent liquid used to improve paint quality through water repelling, preventetching, freeze-thaw and for insulation to prevent weather damage. | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起 | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| GABEPRO® GPM-800 | Gabriel Performance Products | GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and i...展开 GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. 收起 | |
| GABEPRO® GPM-8003 | Gabriel Performance Products | GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and ...展开 GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. 收起 | |
| GABEPRO® GPM-800LO | Gabriel Performance Products | GABEPRO® GPM-800LO is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and...展开 GABEPRO® GPM-800LO is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. GPM-800LO is formulated to have an improved odor relative to our standard product. 收起 | |
| GABEPRO® GPM-888 | Gabriel Performance Products | GABEPRO® GPM-888 is formulated from a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low te...展开 GABEPRO® GPM-888 is formulated from a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. This material is formulated to cure epoxy resin in approximately 5 minutes. 收起 | |
| GABEPRO® GPM-891 | Gabriel Performance Products | GABEPRO® GPM-891 is an easy to use epoxy curing agent with reduced odor and provides a non-yellowing casting color. The amine additive in GPM-891 is formaldehyde-free and is less sensitive to the addition of a chelator that can be used help reduce skinnin...展开 GABEPRO® GPM-891 is an easy to use epoxy curing agent with reduced odor and provides a non-yellowing casting color. The amine additive in GPM-891 is formaldehyde-free and is less sensitive to the addition of a chelator that can be used help reduce skinning problems. GABEPRO® GPM-891 is designed to provide a gel time of 5 minutes when formulated with a standard bis-phenol A epoxy resin. 收起 | |
| Hexamethyldisilazane | Qufu Wanda Chemical Industry Co., Ltd. | Hexamethyldisilazane is a colorless clear liquid used in surface treatment of white carbon black, Ti and other powder. It is also used as an adhesion promotion agent, commonly in photolithography. | |
| Isobutyltriethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | Isobutyltriethoxysilane is a colorless clear liquid that can be used as silane coupling agent, silane adhesion promoter and a silane crosslinking agent. | |
| Isobutyltrimethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | Isobutyltrimethoxysilane is a colorless clear liquid that can be used as silane coupling agent, silane adhesion promoter and a silane crosslinking agent. | |
| Mercaptopropylmethyldiethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | Mercaptopropylmethyldiethoxysilane is a colorless transparent liquid that is used as a coupling agent in polysulfide and polyurethane caulks and sealants. It is commonly used in sulfur-cured and metal oxide-cured elastomers for modulus, tensile and tear ...展开 Mercaptopropylmethyldiethoxysilane is a colorless transparent liquid that is used as a coupling agent in polysulfide and polyurethane caulks and sealants. It is commonly used in sulfur-cured and metal oxide-cured elastomers for modulus, tensile and tear strength, heat buildup, abrasion resistance and resilience. Compression set and cure time are also improved. This product can be applied as a pretreatment on minerals or as in ingredient at the time of compounding. Due to it being a fast sulfur containing silane only relatively small levels are necessary. 收起 | |
| Mercaptopropylmethyldimethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | Mercaptopropylmethyldimethoxysilane is a colorless transparent liquid that is used as a coupling agent in polysulfide and polyurethane caulks and sealants. It is commonly used in sulfur-cured and metal-cured elastomers for modulus, tensile and tear stren...展开 Mercaptopropylmethyldimethoxysilane is a colorless transparent liquid that is used as a coupling agent in polysulfide and polyurethane caulks and sealants. It is commonly used in sulfur-cured and metal-cured elastomers for modulus, tensile and tear strength, heat buildup, abrasion resistance and resilience. Compression set and cure time are also improved. This product can be applied as a pretreatment on minerals or as in ingredient at the time of compounding. Due to it being a fast sulfur containing silane only relatively small levels are necessary. 收起 | |
| Methylphenyldimethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | Methylphenyldimethoxysilane is a colorless clear liquid that can be used as silane coupling agent, silane adhesion promoter and a silane crosslinking agent. | |
| Methyltriacetoxysilane(MTAC) | Qufu Wanda Chemical Industry Co., Ltd. | Methyltriacetoxysilane(MTAC) is a colorless transparent liquid and an acetoxy silane commonly used as a one-component mixture to make RTV-1 silicone sealant. When this compound is exposed to moisture some acetoxy groups are hydrolyzed and self-condense or...展开 Methyltriacetoxysilane(MTAC) is a colorless transparent liquid and an acetoxy silane commonly used as a one-component mixture to make RTV-1 silicone sealant. When this compound is exposed to moisture some acetoxy groups are hydrolyzed and self-condense or react with other acetoxy and rapid crosslinking takes place. 收起 | |
| Methyltriethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | Methyltriethoxysilane is a colorless transparent liquid that can be used as a penetrating sealer and surface modifier to generate hydrophobicity (mineral fillers or inorganic pigments). When the product is introduced to polymers it gives a medium-chain a...展开 Methyltriethoxysilane is a colorless transparent liquid that can be used as a penetrating sealer and surface modifier to generate hydrophobicity (mineral fillers or inorganic pigments). When the product is introduced to polymers it gives a medium-chain alkyl functionality. 收起 | |
| Methyltris(methylethylketoxime)silane(MOS) | Qufu Wanda Chemical Industry Co., Ltd. | Methyltris(methylethylketoxime)silane(MOS) is a colorless or yellowish transparent liquid that can be used as a neutral curing agent in silicone sealant formulations. This product is commonly used a cross-linker for oxime silicone sealants and can be use...展开 Methyltris(methylethylketoxime)silane(MOS) is a colorless or yellowish transparent liquid that can be used as a neutral curing agent in silicone sealant formulations. This product is commonly used a cross-linker for oxime silicone sealants and can be used alone or with other combinations of oxime silanes to enable the sealant with targeted properties. 收起 | |
| Methylvinyldichlorosilane | Qufu Wanda Chemical Industry Co., Ltd. | Methylvinyldichlorosilane is a colorless transparent liquid used as a coupling agent, adhesion promoter and cross-linking agent in polyethylenes. This product can also be used for surface treatment of mineral fillers in plastics, peroxide cured rubber, p...展开 Methylvinyldichlorosilane is a colorless transparent liquid used as a coupling agent, adhesion promoter and cross-linking agent in polyethylenes. This product can also be used for surface treatment of mineral fillers in plastics, peroxide cured rubber, polyester, polyolefins, styrenics and acrylics. 收起 | |
| Methylvinyldiethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | Methylvinyldiethoxysilane is a colorless transparent liquid used as a coupling agent, adhesion promoter and cross-linking agent in polyethylenes. This product can also be used for surface treatment of mineral fillers in plastics, peroxide cured rubber, po...展开 Methylvinyldiethoxysilane is a colorless transparent liquid used as a coupling agent, adhesion promoter and cross-linking agent in polyethylenes. This product can also be used for surface treatment of mineral fillers in plastics, peroxide cured rubber, polyester, polyolefins, styrenics and acrylics. 收起 | |
| N-[3-(Trimethoxysilyl)propyl]ethylenediamine | Qufu Wanda Chemical Industry Co., Ltd. | N-[3-(Trimethoxysilyl)propyl]ethylenediamine is a colorless to light yellow liquid that can be used as a finish or size constituent in glass fiber composites, a primer or additive for chemical modification in sealants and adhesives and an additive and pri...展开 N-[3-(Trimethoxysilyl)propyl]ethylenediamine is a colorless to light yellow liquid that can be used as a finish or size constituent in glass fiber composites, a primer or additive for chemical modification in sealants and adhesives and an additive and primer for improving adhesion to the substrate in paints and coatings. 收起 | |
| N-(Triethoxysilylpropyl)urea | Qufu Wanda Chemical Industry Co., Ltd. | N-(Triethoxysilylpropyl)urea is a colorless transparent liquid used to improve adhesion between inorganic filler or fiber and the polymer. It is applied to glass fiber sizes and finishes, wool insulation resin binders, numerous primers, foundry sand bind...展开 N-(Triethoxysilylpropyl)urea is a colorless transparent liquid used to improve adhesion between inorganic filler or fiber and the polymer. It is applied to glass fiber sizes and finishes, wool insulation resin binders, numerous primers, foundry sand binders, adhesives, sealants and abrasive grinding wheel binders. 收起 | |
| Phenoxy PK™FE | Gabriel Performance Products | Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resin...展开 Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™FE may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™FE is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. 收起 | |
| Phenoxy PK™HA | Gabriel Performance Products | Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins...展开 Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HA may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HA is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. 收起 | |
| Phenoxy PK™HB | Gabriel Performance Products | Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins...展开 Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HB may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HB is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. 收起 | |
| Phenoxy PK™HH | Gabriel Performance Products | Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resin...展开 Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HH may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HH is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. 收起 | |
| Phenoxy PK™HM-301 | Gabriel Performance Products | Phenoxy PK™HM-301 is a solid-grade phenoxy PKHC resin melt blended with an oligomeric polyester polyol containing primary hydroxyl functional groups. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent...展开 Phenoxy PK™HM-301 is a solid-grade phenoxy PKHC resin melt blended with an oligomeric polyester polyol containing primary hydroxyl functional groups. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). PK™HM-301 provides for improved reactivity due to the presence of primary hydroxyls and the lower glass transition temperature of the alloy. PK™HM-301 has a glass transition temperature of about 35 °C which imparts improved solids/viscosity ratios in common solvents like MEK. Coatings of PK™HM-301 exhibit high levels of flexibility and formability when appropriately cured. 收起 | |
| Phenoxy PK™HP-80 | Gabriel Performance Products | Phenoxy PK™HP-80 is a micronized powder–grade Phenoxy resin with a particle size of approximately 70 microns. Phenoxy resins (poly hydroxyl ethers) are tough, ductile, amorphous polymers having excellent thermal stability, adhesion and cohesion strength, ...展开 Phenoxy PK™HP-80 is a micronized powder–grade Phenoxy resin with a particle size of approximately 70 microns. Phenoxy resins (poly hydroxyl ethers) are tough, ductile, amorphous polymers having excellent thermal stability, adhesion and cohesion strength, and excellent vapor barrier properties. Phenoxy resins also react with cross-linkers like isocyanates, phenolic and melamine resins along the backbone hydroxyl groups. PK™HP-80 provides for ease of incorporation into liquid resins due to its high surface area; recommended levels of PKHP-80 incorporated into epoxy resins are 5 to 25% depending on the desired mix viscosity. 收起 | |
| Propyltrimethoxysilane | Qufu Wanda Chemical Industry Co., Ltd. | Propyltrimethoxysilane is a colorless clear liquid used as a primer or additive and for chemical modification in sealants and adhesives. It is also used in paints and coatings as an additive and primer for improving adhesion to the substrate. | |
| Silane Coupling Agent ELT-S 550 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of ad...展开 Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of adhesives and coatings. 收起 | |
| Silane Coupling Agent ELT-S 551 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in ad...展开 Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in adhesives and coatings. 收起 | |
| Silane Coupling Agent ELT-S 602 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an a...展开 Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an adhesion promoter in adhesives and sealants. 收起 | |
| Silane Coupling Agent ELT-S 792 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 ...展开 Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 acts as an adhesion promoter in PVC-based sealants. 收起 |
