UL Prospector

成功!

成功保存搜索结果
Bitoner® C5 Resin BT-2104 Qingdao Bater Chemical Co., Ltd. Bitoner® C5 Resin BT-2104, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with a wide range of polymers, good thermal stability, low wa...展开 Bitoner® C5 Resin BT-2104, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with a wide range of polymers, good thermal stability, low wax cloud point, low odor, and water resistance. BT-2104 has recommended applications in solvent based PSA, sealants, coatings, hot melt adhesives, and HMPSA. 收起
Bitoner® C9 Resin BP-100 Qingdao Bater Chemical Co., Ltd. Bitoner® C9 Resin BP-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with SAS, EVA, and other polymers, good thermal resistance, low...展开 Bitoner® C9 Resin BP-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with SAS, EVA, and other polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-100 has recommended applications in sealants, shoe adhesives, rubber, coatings, and hot melt adhesives. 收起
Bitoner® C9 Resin BP-120 Qingdao Bater Chemical Co., Ltd. Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...展开 Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-120 has recommended applications in sealants, solvent based adhesives, rubber, coatings, printing ink, and hot melt adhesives. 收起
Bitoner® C9 Resin BP-140 Qingdao Bater Chemical Co., Ltd. Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...展开 Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-140 has recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, asphalt modification, printing ink, and hot melt adhesives. 收起
Bitoner® C9 Resin BP-150 Qingdao Bater Chemical Co., Ltd. Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent...展开 Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, printing ink, and hot melt adhesives. 收起
Bitoner® H-100 Qingdao Bater Chemical Co., Ltd. Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has re...展开 Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has recommended applications in solvent adhesives, plastic modification, hot melt adhesives, and wax modification. 收起
Bitoner® Hydrogenated C9 Resins H-120 Qingdao Bater Chemical Co., Ltd. Bitoner® Hydrogenated C9 Resins H-120, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS...展开 Bitoner® Hydrogenated C9 Resins H-120, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-120 has recommended applications in solvent adhesives, hot melt adhesives, and wax modification. 收起
Bitoner® Resin BA-120 Qingdao Bater Chemical Co., Ltd. Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water res...展开 Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water resistance, low odor, and very low VOC. BA-120 has recommended applications in sealants, rubber, coatings, printing ink, hot melt adhesive, and solvent based adhesives. 收起
Bitoner® Resin BT-100 Qingdao Bater Chemical Co., Ltd. Bitoner® Resin BT-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin. It has good chemical stability, water resistance, good affinity with a wide range of fillers, and has recommended applications in th...展开 Bitoner® Resin BT-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin. It has good chemical stability, water resistance, good affinity with a wide range of fillers, and has recommended applications in thermoplastic road marking paints, rubber, sealants, and hot melt adhesives. 收起
Bitoner® Resin BT-1102 Qingdao Bater Chemical Co., Ltd. Bitoner® Resin BT-1102, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin. It has good chemical stability, water resistance, good affinity with a wide range of fillers, and has recommended applications in t...展开 Bitoner® Resin BT-1102, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin. It has good chemical stability, water resistance, good affinity with a wide range of fillers, and has recommended applications in thermoplastic road marking paints, coatings, sealants, and hot melt adhesives. 收起
Bitoner® Resin BT-1200H Qingdao Bater Chemical Co., Ltd. Bitoner® Resin BT-1200H, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with APAO, NR, and other polymers, good thermal stability, low ...展开 Bitoner® Resin BT-1200H, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with APAO, NR, and other polymers, good thermal stability, low odor, low volatility, and water resistance. BT-1200H has recommended applications in sealants, wax modifications, asphalt modification, rubber, coatings, and hot melt adhesives. 收起
Bitoner® Resin BT-2110 Qingdao Bater Chemical Co., Ltd. Bitoner® Resin BT-2110, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with polymers and SIS, low wax cloud point, good thermal stabili...展开 Bitoner® Resin BT-2110, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with polymers and SIS, low wax cloud point, good thermal stability, low odor, low volatility, and water resistance. BT-2104 has recommended applications in solvent based PSA, sealants, coatings, hot melt adhesives, and HMPSA. 收起
Bitoner® Resin C-2120 Qingdao Bater Chemical Co., Ltd. Bitoner® Resin C-2120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C5 hydrocarbon resin. It has good heat stability, low odor, good compatibility, and solubility in various solvents. C-2120 has recommended a...展开 Bitoner® Resin C-2120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C5 hydrocarbon resin. It has good heat stability, low odor, good compatibility, and solubility in various solvents. C-2120 has recommended applications in hot melt adhesives, sealants, solvent based PSA, HMPSA, and coatings. 收起
Bitoner® Resin C-2125 Qingdao Bater Chemical Co., Ltd. Bitoner® Resin C-2125, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C5 hydrocarbon resin. It has good heat stability, low odor, good compatibility, and solubility in various solvents. C-2120 has recommended a...展开 Bitoner® Resin C-2125, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C5 hydrocarbon resin. It has good heat stability, low odor, good compatibility, and solubility in various solvents. C-2120 has recommended applications in hot melt adhesives, sealants, solvent based PSA, HMPSA, and coatings. 收起
Bitoner® Resin C2130 Qingdao Bater Chemical Co., Ltd. Bitoner® Resin C2130, in the form of a slightly yellow granular, is low molecular weight, C9 modified C5 hydrocarbon resin. It has low odor, low volatility, good heat stability, good compatibility, and recommended applications in sealants, coatings, hot m...展开 Bitoner® Resin C2130, in the form of a slightly yellow granular, is low molecular weight, C9 modified C5 hydrocarbon resin. It has low odor, low volatility, good heat stability, good compatibility, and recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 收起
Bitoner® Resin DH-1110 Qingdao Bater Chemical Co., Ltd. Bitoner® Resin DH-1110, in the form of a white granular, is a thermoplastic resin obtained from hydrogenation and polymerization of cyclic ingredients such as derived monomers. It has good heat stability, good initial color, low VOC, water resistance, and...展开 Bitoner® Resin DH-1110, in the form of a white granular, is a thermoplastic resin obtained from hydrogenation and polymerization of cyclic ingredients such as derived monomers. It has good heat stability, good initial color, low VOC, water resistance, and good compatibility. DH-1110 has recommended applications in hot melt adhesives, sealants, pressure sensitive adhesives, and wax modifications. 收起
Bitoner® Resin LH-3100 Qingdao Bater Chemical Co., Ltd. Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications...展开 Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications in sealants, coatings, ink, pressure sensitive adhesives, and hot melt adhesives. 收起
Bitoner® Resin TR-100 Qingdao Bater Chemical Co., Ltd. Bitoner® Resin TR-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended appli...展开 Bitoner® Resin TR-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 收起
Bitoner® Resin TR-120 Qingdao Bater Chemical Co., Ltd. Bitoner® Resin TR-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C9 hydrocarbon resin. . It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended appl...展开 Bitoner® Resin TR-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C9 hydrocarbon resin. . It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 收起
Bitoner® Resin TR-2080 Qingdao Bater Chemical Co., Ltd. Bitoner® Resin TR-2080, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat resistance, good compatibility, water resistance, and has recommended app...展开 Bitoner® Resin TR-2080, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat resistance, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 收起
Calcium Sulfate Whisker Shanghai Tengmin Industry Co., Ltd. Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials.
Dimer Acid Anhui Elite Industrial Co., Ltd Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起
Fumed Silica (A-150) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起
Fumed Silica (A-200) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica (A-380) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica 972 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
Fumed Silica 974 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
HECTALITE® 200 American Colloid Company HECTALITE® 200 is a high-purity, micronized sodium hectorite clay, consisting of microfine particles for emulsion stabilizing, gelling, suspending, and binding. This product is a high-yielding hectorite clay that exhibits high efficiency, excellent rheolo...展开 HECTALITE® 200 is a high-purity, micronized sodium hectorite clay, consisting of microfine particles for emulsion stabilizing, gelling, suspending, and binding. This product is a high-yielding hectorite clay that exhibits high efficiency, excellent rheology and stability, and is typically used in architectural paints, ceramics, and adhesives. 收起
HR-A5100 Zhejiang Chembest United Industrial Co., Ltd. HR-A5100, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ...展开 HR-A5100, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起
HR-A5101 Zhejiang Chembest United Industrial Co., Ltd. HR-A5101, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ho...展开 HR-A5101, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起
HR-A5110 Zhejiang Chembest United Industrial Co., Ltd. HR-A5110, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ho...展开 HR-A5110, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起
HR-A5120 Zhejiang Chembest United Industrial Co., Ltd. HR-A5120, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ho...展开 HR-A5120, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起
Silane Coupling Agent ELT-S 550 Anhui Elite Industrial Co., Ltd Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of ad...展开 Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of adhesives and coatings. 收起
Silane Coupling Agent ELT-S 551 Anhui Elite Industrial Co., Ltd Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in ad...展开 Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in adhesives and coatings. 收起
Silane Coupling Agent ELT-S 602 Anhui Elite Industrial Co., Ltd Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an a...展开 Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an adhesion promoter in adhesives and sealants. 收起
Silane Coupling Agent ELT-S 792 Anhui Elite Industrial Co., Ltd Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 ...展开 Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 acts as an adhesion promoter in PVC-based sealants. 收起
Silicon Dioxide GJ-103 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase th...展开 Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide JLJ-105 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is...展开 Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide NY-102 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bondin...展开 Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide SP-106 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is a...展开 Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide TL-104 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase m...展开 Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide XJ-100 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide XJ-100 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties.
Silicon Dioxide XJ-101 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide XJ-101 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties.
Silicon Dioxide ZZ-108 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide ZZ-108 is a transparent white powder that has high bulkiness and water-solubility properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength, and it is also used in paints and coatings.
VOLCLAY® HPM-20 American Colloid Company VOLCLAY® HPM-20 is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, ...展开 VOLCLAY® HPM-20 is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, and emulsion stabilizer in adhesives and industrial applications. 收起
VOLCLAY® HPM-75 American Colloid Company VOLCLAY® HPM-75 is a high-purity sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, and emulsion sta...展开 VOLCLAY® HPM-75 is a high-purity sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, and emulsion stabilizer for adhesives, coatings, and other industrial applications. 收起
Vinyl Polymer Resin (VAH) ELT-VAAL Anhui Elite Industrial Co., Ltd Vinyl Polymer Resin (VAH) ELT-VAAL is a white or slight yellow powder which has a high molecular weight. This product has a molecular weight of 25000 and is also crosslinkable with amino resins, polyisocyanates, and other generic resins. This product pr...展开 Vinyl Polymer Resin (VAH) ELT-VAAL is a white or slight yellow powder which has a high molecular weight. This product has a molecular weight of 25000 and is also crosslinkable with amino resins, polyisocyanates, and other generic resins. This product provides blocking resistance, sand-ability, adhesion, and resistance to paint, coatings, adhesives, and inks. 收起
Vinyl Polymer Resin VAM Resin Anhui Elite Industrial Co., Ltd Vinyl Polymer Resin VAM Resin is a white powder with a high molecular weight. This product has a viscosity between 40 and 48 and is also approved for food contact applications by the FDA. Vinyl Polymer Resin VAM Resin provides flexibility and adhesion to...展开 Vinyl Polymer Resin VAM Resin is a white powder with a high molecular weight. This product has a viscosity between 40 and 48 and is also approved for food contact applications by the FDA. Vinyl Polymer Resin VAM Resin provides flexibility and adhesion to paint, coatings, adhesives, and inks. 收起