| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展开 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起 | |
| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...展开 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. 收起 | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展开 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起 | |
| Andisil 1100 Silane | AB Specialty Silicones | Andisil 1100 Silane is an amino silane coupling agent. It is used to provide a bond between inorganic substrates and organic polymers. Andisil 1100 Silane is recommended for fiberglass reinforced composites. | |
| Andisil 1110 Silane | AB Specialty Silicones | Andisil 1110 Silane is an amino silane coupling agent. It is used to provide bonds between inorganic substrates and organic polymers. Andisil 1110 Silane is recommended for fiberglass reinforced composites. It can also be used as an adhesion promoter in R...展开 Andisil 1110 Silane is an amino silane coupling agent. It is used to provide bonds between inorganic substrates and organic polymers. Andisil 1110 Silane is recommended for fiberglass reinforced composites. It can also be used as an adhesion promoter in RTV silicones, ABC, PVC, and polystyrene. 收起 | |
| Andisil 1120 Silane | AB Specialty Silicones | Andisil 1120 Silane is an amino silane that is used as a coupling agent. It can be used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, and others. Acceptable polymers include bulyl, polyurethane ...展开 Andisil 1120 Silane is an amino silane that is used as a coupling agent. It can be used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, and others. Acceptable polymers include bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, and more. 收起 | |
| Andisil 1122 Silane | AB Specialty Silicones | Andisil 1122 Silane is a diamine functional silane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1122 Silane can be used with polymers such as bulyl, poly...展开 Andisil 1122 Silane is a diamine functional silane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1122 Silane can be used with polymers such as bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, silylated polyurethane, nulamine, and others. 收起 | |
| Andisil 1130 Silane | AB Specialty Silicones | Andisil 1130 Silane is a triamine functional propyltrimethoxysilane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1130 Silane can be used with polymers su...展开 Andisil 1130 Silane is a triamine functional propyltrimethoxysilane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1130 Silane can be used with polymers such as bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, silylated polyurethane, nulamine, and others. 收起 | |
| Andisil 1170 Silane | AB Specialty Silicones | Andisil 1170 Silane is a bis(trimethoxysilylpropyl)amine amino silane. It is used as an adhesive and sealant. | |
| Andisil 1289 Silane | AB Specialty Silicones | Andisil 1289 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a bifunctional polysulfide silane used as an adhesion promoter for precious metals. Andisil 1289 Silane can also be used as a coupling agent and vulcanizing agent fo...展开 Andisil 1289 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a bifunctional polysulfide silane used as an adhesion promoter for precious metals. Andisil 1289 Silane can also be used as a coupling agent and vulcanizing agent for rubbers. 收起 | |
| Andisil 151 Silane | AB Specialty Silicones | Andisil 151 Silane is a colorless, transparent liquid vinyl silane. It is a coupling agent in filled polymer systems. Andisil 151 Silane can also be used as a finish for glass or a binder additive in glass reinforced resins. | |
| Andisil 171 Silane | AB Specialty Silicones | Andisil 171 Silane is a colorless, transparent liquid vinyl silane. It can be used as a crosslinking agent, adhesion promoter, and/or surfaces modifier since it can bind chemically with both inorganic and organic polymers. Andisil 171 Silane improves adhe...展开 Andisil 171 Silane is a colorless, transparent liquid vinyl silane. It can be used as a crosslinking agent, adhesion promoter, and/or surfaces modifier since it can bind chemically with both inorganic and organic polymers. Andisil 171 Silane improves adhesion between glass, mineral, and metal surfaces and provides elongation, flexibility, and spreading. 收起 | |
| Andisil 172 Silane | AB Specialty Silicones | Andisil 172 Silane is a colorless or light yellow liquid vinyl silane. It is used as a coupling agent and is easily dissolved in water. Andisil 172 Silane is mainly used in mineral-filled EPM and EPDM cables. Andisil 172 Silane is also used as an adhesion...展开 Andisil 172 Silane is a colorless or light yellow liquid vinyl silane. It is used as a coupling agent and is easily dissolved in water. Andisil 172 Silane is mainly used in mineral-filled EPM and EPDM cables. Andisil 172 Silane is also used as an adhesion promoter in primers and coatings. 收起 | |
| Andisil 174 Silane | AB Specialty Silicones | Andisil 174 Silane is a methacryl-functional silane adhesion promoter. It can be used as a strength improver in reinforced polyester composites and reinforced polyester resin composites. Andisil 174 Silane can also be used as a coupling agent, crosslinkin...展开 Andisil 174 Silane is a methacryl-functional silane adhesion promoter. It can be used as a strength improver in reinforced polyester composites and reinforced polyester resin composites. Andisil 174 Silane can also be used as a coupling agent, crosslinking agent, and blend additive. 收起 | |
| Andisil 187 Silane | AB Specialty Silicones | Andisil 187 Silane is an epoxy functional silane coupling agent. It is used for unsaturated polyester-fiberglass composites and for polysulfide/polyurethane caulks & sealants. Andisil 187 Silane can be used in waterborne acrylic sealants and epoxy coating...展开 Andisil 187 Silane is an epoxy functional silane coupling agent. It is used for unsaturated polyester-fiberglass composites and for polysulfide/polyurethane caulks & sealants. Andisil 187 Silane can be used in waterborne acrylic sealants and epoxy coatings. 收起 | |
| Andisil 189 Silane | AB Specialty Silicones | Andisil 189 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a mercapto-functional silane coupling agent for polysulfide and polyurethane caulks and sealants. Andisil 189 Silane improves adhesion to glass and metal surfaces. | |
| Andisil 1891 Silane | AB Specialty Silicones | Andisil 1891 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a mercapto-functional silane coupling agent for polysulfide and polyurethane caulks and sealants. Andisil 1891 Silane can be chemically bonded with materials such as...展开 Andisil 1891 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a mercapto-functional silane coupling agent for polysulfide and polyurethane caulks and sealants. Andisil 1891 Silane can be chemically bonded with materials such as silica, clay, mica, and talc. 收起 | |
| Andisil 2100 Silane | AB Specialty Silicones | Andisil 2100 Silane is an aminopropylmethyldiethoxysilane coupling agent. This product is mainly used for foundry resins. | |
| Andisil 2120 Silane | AB Specialty Silicones | Andisil 2120 Silane is a diamino-functional silane that provides elongation, flexibility, and spreading at the interface as a coupling agent. It is used to improve adhesion between glass, mineral, and metal surface and aminoreactive resins. | |
| Andisil 6041 Silane | AB Specialty Silicones | Andisil 6041 Silane is a glycidoxy (epoxy) -functional silane coupling agent. It can be used for unsaturated polyester-fiberglass composites, polysulfide & polyurethane caulks and sealants, and glass roving size-binders. Andisil 6041 Silane can also be us...展开 Andisil 6041 Silane is a glycidoxy (epoxy) -functional silane coupling agent. It can be used for unsaturated polyester-fiberglass composites, polysulfide & polyurethane caulks and sealants, and glass roving size-binders. Andisil 6041 Silane can also be used in waterborne systems and is suitable for many polymers. 收起 | |
| Andisil HMDZ | AB Specialty Silicones | Andisil HMDZ, chemical name hexamethyldisilazane, is a clear, colorless liquid. It can be used as a hydrophobing agent for inorganic fillers. Andisil HMDZ can be used as a protecting agent for OH and SH functionality. | |
| Andisil MOH 1,000 | AB Specialty Silicones | Andisil MOH 1,000 is a clear, slightly hazy colorless monofunctional silanol polymer (1,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 1,000 can be used in high consistency silicone rubber and silicone ro...展开 Andisil MOH 1,000 is a clear, slightly hazy colorless monofunctional silanol polymer (1,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil MOH 10,000 | AB Specialty Silicones | Andisil MOH 10,000 is a clear, slightly hazy colorless monofunctional silanol polymer (10,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 10,000 can be used in high consistency silicone rubber and silicone...展开 Andisil MOH 10,000 is a clear, slightly hazy colorless monofunctional silanol polymer (10,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 10,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil MOH 50,000 | AB Specialty Silicones | Andisil MOH 50,000 is a clear, slightly hazy colorless monofunctional silanol polymer (50,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 50,000 can be used in high consistency silicone rubber and silicone...展开 Andisil MOH 50,000 is a clear, slightly hazy colorless monofunctional silanol polymer (50,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil MOS | AB Specialty Silicones | Andisil MOS is a colorless transparent liquid with composition methyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MOS sealants can be used on corrosion sensitive substrates like met...展开 Andisil MOS is a colorless transparent liquid with composition methyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MOS sealants can be used on corrosion sensitive substrates like metals or marble. 收起 | |
| Andisil MT 9010 | AB Specialty Silicones | Andisil MT 9010 is a colorless transparent liquid with composition 90% MOS/10% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MT 9010 sealants can be used on corrosion sensitive substrates like met...展开 Andisil MT 9010 is a colorless transparent liquid with composition 90% MOS/10% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MT 9010 sealants can be used on corrosion sensitive substrates like metals or marble. 收起 | |
| Andisil OH 1,000 | AB Specialty Silicones | Andisil OH 1,000 is a clear, slightly hazy colorless silanol terminated fluid (1,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 1,000 can be used in high consistency silicone rubber and silicone room temp...展开 Andisil OH 1,000 is a clear, slightly hazy colorless silanol terminated fluid (1,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil OH 14,000 | AB Specialty Silicones | Andisil OH 14,000 is a clear, slightly hazy colorless silanol terminated fluid (14,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 14,000 can be used in high consistency silicone rubber and silicone room t...展开 Andisil OH 14,000 is a clear, slightly hazy colorless silanol terminated fluid (14,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 14,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil OH 2,000 | AB Specialty Silicones | Andisil OH 2,000 is a clear, slightly hazy colorless silanol terminated fluid (2,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 2,000 can be used in high consistency silicone rubber and silicone room temp...展开 Andisil OH 2,000 is a clear, slightly hazy colorless silanol terminated fluid (2,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 2,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil OH 20,000 | AB Specialty Silicones | Andisil OH 20,000 is a clear, slightly hazy colorless silanol terminated fluid (20,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 20,000 can be used in high consistency silicone rubber and silicone room t...展开 Andisil OH 20,000 is a clear, slightly hazy colorless silanol terminated fluid (20,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 20,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil OH 30 | AB Specialty Silicones | Andisil OH 30 is a clear, slightly hazy colorless silanol liquid (6%, 30 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 30 can be used in high consistency silicone rubber and silicone room temperature vulcaniz...展开 Andisil OH 30 is a clear, slightly hazy colorless silanol liquid (6%, 30 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 30 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. It can be used as a reactive diluent for high viscosity polymers to adjust the overall viscosity of the formula. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil OH 300,000 | AB Specialty Silicones | Andisil OH 300,000 is a clear, slightly hazy colorless silanol terminated fluid (300,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 300,000 can be used in high consistency silicone rubber and silicone roo...展开 Andisil OH 300,000 is a clear, slightly hazy colorless silanol terminated fluid (300,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 300,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil OH 3,500 | AB Specialty Silicones | Andisil OH 3,500 is a clear, slightly hazy colorless silanol terminated fluid (3,500 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 3,500 can be used in high consistency silicone rubber and silicone room temp...展开 Andisil OH 3,500 is a clear, slightly hazy colorless silanol terminated fluid (3,500 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 3,500 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil OH 40 | AB Specialty Silicones | Andisil OH 40 is a clear, slightly hazy colorless silanol liquid (3.5%, 40 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 40 can be used in high consistency silicone rubber and silicone room temperature vulcan...展开 Andisil OH 40 is a clear, slightly hazy colorless silanol liquid (3.5%, 40 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 40 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. It can be used as a reactive diluent for high viscosity polymers to adjust the overall viscosity of the formula. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil OH 4,000 | AB Specialty Silicones | Andisil OH 4,000 is a clear, slightly hazy colorless silanol terminated fluid (4,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 4,000 can be used in high consistency silicone rubber and silicone room temp...展开 Andisil OH 4,000 is a clear, slightly hazy colorless silanol terminated fluid (4,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 4,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil OH 50,000 | AB Specialty Silicones | Andisil OH 50,000 is a clear, slightly hazy colorless silanol terminated fluid (50,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 50,000 can be used in high consistency silicone rubber and silicone room t...展开 Andisil OH 50,000 is a clear, slightly hazy colorless silanol terminated fluid (50,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil OH 6,000 | AB Specialty Silicones | Andisil OH 6,000 is a clear, slightly hazy colorless silanol terminated fluid (6,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 6,000 can be used in high consistency silicone rubber and silicone room temp...展开 Andisil OH 6,000 is a clear, slightly hazy colorless silanol terminated fluid (6,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 6,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil OH 70 | AB Specialty Silicones | Andisil OH 70 is a clear, slightly hazy colorless silanol liquid (1.25%, 70 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 70 can be used in high consistency silicone rubber and silicone room temperature vulca...展开 Andisil OH 70 is a clear, slightly hazy colorless silanol liquid (1.25%, 70 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 70 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. It can be used as a reactive diluent for high viscosity polymers to adjust the overall viscosity of the formula. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil OH 750 | AB Specialty Silicones | Andisil OH 750 is a clear, slightly hazy colorless silanol terminated fluid (750 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 750 can be used in high consistency silicone rubber and silicone room temperatur...展开 Andisil OH 750 is a clear, slightly hazy colorless silanol terminated fluid (750 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 750 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil OH 80,000 | AB Specialty Silicones | Andisil OH 80,000 is a clear, slightly hazy colorless silanol terminated fluid (80,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 80,000 can be used in high consistency silicone rubber and silicone room t...展开 Andisil OH 80,000 is a clear, slightly hazy colorless silanol terminated fluid (80,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 80,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. 收起 | |
| Andisil POS | AB Specialty Silicones | Andisil POS is a colorless transparent liquid with composition phenyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil POS sealants can be used on corrosion sensitive substrates like met...展开 Andisil POS is a colorless transparent liquid with composition phenyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil POS sealants can be used on corrosion sensitive substrates like metals or marble. 收起 | |
| Andisil TT 5050 | AB Specialty Silicones | Andisil TT 5050 is a colorless transparent liquid with composition tetrakis(MEKO)silane in toluene. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil TT 5050 sealants can be used on corrosion sensitive sub...展开 Andisil TT 5050 is a colorless transparent liquid with composition tetrakis(MEKO)silane in toluene. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil TT 5050 sealants can be used on corrosion sensitive substrates like metals or marble. 收起 | |
| Andisil VOS | AB Specialty Silicones | Andisil VOS is a colorless transparent liquid with composition vinyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VOS sealants can be used on corrosion sensitive substrates like meta...展开 Andisil VOS is a colorless transparent liquid with composition vinyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VOS sealants can be used on corrosion sensitive substrates like metals or marble. 收起 | |
| Andisil VT 6535 | AB Specialty Silicones | Andisil VT 6535 is a yellowish to brownish liquid with composition 65% VOS/35% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 6535 sealants can be used on corrosion sensitive substrates like met...展开 Andisil VT 6535 is a yellowish to brownish liquid with composition 65% VOS/35% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 6535 sealants can be used on corrosion sensitive substrates like metals or marble. 收起 | |
| Andisil VT 8218 | AB Specialty Silicones | Andisil VT 8218 is a yellowish to brownish liquid with composition 82% VOS/18% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 8218 sealants can be used on corrosion sensitive substrates like met...展开 Andisil VT 8218 is a yellowish to brownish liquid with composition 82% VOS/18% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 8218 sealants can be used on corrosion sensitive substrates like metals or marble. 收起 | |
| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展开 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展开 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-117 | DCC (Dairen Chemical Corp.) | DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展开 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起 | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展开 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展开 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展开 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起 | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起 | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起 | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起 | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起 | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展开 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起 | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展开 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起 | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...展开 DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. 收起 | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展开 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起 | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展开 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起 | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...展开 DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. 收起 | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...展开 DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. 收起 | |
| DA-371 | DCC (Dairen Chemical Corp.) | DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...展开 DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. 收起 | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...展开 DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...展开 DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...展开 DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. 收起 | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....展开 DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-691 | DCC (Dairen Chemical Corp.) | DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...展开 DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. 收起 | |
| DA-901 | DCC (Dairen Chemical Corp.) | DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...展开 DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. 收起 | |
| DA-908 | DCC (Dairen Chemical Corp.) | DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...展开 DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. 收起 | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...展开 DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| Dimer Acid | Anhui Elite Industrial Co., Ltd | Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起 | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起 | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 |
