| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展开 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起 | |
| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...展开 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. 收起 | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展开 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起 | |
| BYK®-012 | BYK 毕克 | BYK®-012是一种矿物油，不含硅的消泡剂，适用于水性无VOC胶粘剂和密封剂 | |
| BYK®-016 | BYK 毕克 | BYK®-016是一种矿物油，不含硅的消泡剂，适用于水性无VOC胶粘剂和密封剂 | |
| BYK®-022 | BYK 毕克 | 含硅消泡剂，适用于水性胶粘剂和密封剂 | |
| BYK®-023 | BYK 毕克 | 含硅消泡剂，适用于水性胶粘剂和密封剂 | |
| BYK®-024 | BYK 毕克 | 含硅消泡剂，适用于基于水性乳胶的胶粘剂和密封剂 | |
| BYK®-025 | BYK 毕克 | 含硅消泡剂，适用于基于水性乳胶的胶粘剂和密封剂 | |
| BYK®-028 | BYK 毕克 | 含硅消泡剂，适用于基于水性乳胶的胶粘剂和密封剂 | |
| BYK®-035 | BYK 毕克 | 用于有光泽和半光乳液漆以及乳液弹性体的矿物油消泡剂，消除生产和涂装过程中的泡沫。特别适合聚氯乙烯含量为20-40%的乳液体系。高剪力不会对效力产生影响。 | |
| BYK®-037 | BYK 毕克 | 矿物油消泡剂，适合乳胶漆、工业乳胶、乳液灰泥和乳液胶粘剂，用于消除生产和施工过程中产生的泡沫 | |
| BYK®-038 | BYK 毕克 | 矿物油消泡剂，适用于乳胶漆、工业乳胶、乳液灰泥和乳胶胶粘剂，可消除其生产和施工过程中产生的泡沫 | |
| BYK®-077 | BYK 毕克 | 硅树脂消泡剂，防止油漆在生产过程中和用于非极性到高极性溶剂行体系时产生泡沫和气泡。提高表面性能，特别是流平性，提高表面滑爽度，改善抗刮擦和耐划伤性。 | |
| BYK®-085 | BYK 毕克 | 含硅消泡剂和表面助剂，适用于溶剂型胶粘剂和密封剂。BYK®-085是BYK®-077的无溶剂版本，尤其适用于需要无溶剂助剂或需要特殊溶剂的体系 | |
| BYK®-088 | BYK 毕克 | 含硅脱气剂，推荐用于PUR基胶粘剂。也适用于环氧体系 | |
| BYK®-092 | BYK 毕克 | BYK®-092 is a VOC-free, silicone-containing defoamer for aqueous paint systems, printing inks and adhesives. Wide range of uses for conventional application methods | |
| BYK®-093 | BYK 毕克 | 高耐久性含硅消泡剂，适用于水性胶粘剂和密封剂。该消泡剂兼具高效性和广泛的相容性 | |
| BYK®-154 | BYK 毕克 | 基于水性乳胶的胶粘剂和密封剂用分散剂。北美市场不售卖BYK®-154，而是BYK®-156，它们的差别仅在于固含量 | |
| BYK®-1610 | BYK 毕克 | BYK®-1610是一种消泡剂，适用于基于乳胶的胶粘剂和密封剂 | |
| BYK®-1615 | BYK 毕克 | BYK®-1615是一种消泡剂，适用于基于水性乳胶的胶粘剂和密封剂 | |
| BYK®-1630 | BYK 毕克 | BYK®-1630 is a VOC and APEO-free mineral oil defoamer for aqueous architectural coatings, general industrial coatings, floor coatings and adhesives. | |
| BYK-1641 | BYK 毕克 | BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. | |
| BYK-1642 | BYK 毕克 | BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage. | |
| BYK-1745 | BYK 毕克 | BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings. | |
| BYK®-1760 | BYK 毕克 | BYK®-1760 is an emission-free silicone and polymer-containing defoamer and air release agent for solvent-borne and solvent-free coatings, adhesives, sealants and casting resins. Particularly recommended for epoxy resin systems. | |
| BYK®-1789 | BYK 毕克 | BYK®-1789 is a solvent-free, silicone-containing defoamer for aqueous, high build and fast-drying coating systems and adhesives. For improving air release and effectively preventing microfoam. | |
| BYK®-3400 | BYK 毕克 | BYK®-3400是一种含硅表面助剂，适用于水性胶粘剂和密封剂。它可以降低表面张力，从而改善基材润湿性 | |
| BYK®-3410 | BYK 毕克 | BYK®-3410是一种无硅表面助剂，适用于水性胶粘剂和密封剂。它可以降低表面张力，从而改善基材润湿性 | |
| BYK®-345 | BYK 毕克 | 用于水性体系的硅树脂表面活性剂。显著降低表面张力，因而具有出色的基材滑爽性和流平性。是无溶剂型的BYK® 346。无泡沫稳定性，不会提高表面滑爽性或削弱再涂性。 | |
| BYK®-346 | BYK 毕克 | 用于水性体系的硅树脂表面活性剂。是提高水性体系的基材润湿性的标准添加剂。用于含3-7%共溶剂的体系中时具有最适宜的效率。显著降低表面张力。 | |
| BYK®-347 | BYK 毕克 | 用于水性体系的硅树脂表面活性剂。显著降低表面张力，因而具有出色的基材滑爽性和流平性。不会提高表面滑爽性或削弱再涂性。 | |
| BYK®-348 | BYK 毕克 | 用于水性体系的硅树脂表面活性剂。显著降低表面张力，因而具有良好的基材滑爽性和流平性。无泡沫稳定性，不会提高表面滑爽性或削弱再涂性。适合用于无溶剂型水性配方。 | |
| BYK®-349 | BYK 毕克 | BYK®-349是一种用于水性体系的硅树脂表面活性剂。BYK®-349特别适合基于丙烯酸、苯丙、丙烯酸 PU组合、可交联聚氨酯和烘干体系的各种水性配方。 | |
| BYK®-3764 | BYK 毕克 | BYK®-3764 is a solvent-free silicone surface additive for aqueous, solvent-borne and solvent-free coatings and adhesives to increase surface slip and to greatly reduce surface tension. Minor foam stabilization and low dosage. | |
| BYK®-3771 | BYK 毕克 | BYK®-3771 is a silicone surface additive for solvent-free, radiation-curable, and solvent-borne coatings, adhesives, and printing inks with a strong reduction in the surface tension. OH-functional and solvent-free. | |
| BYK®-4509 | BYK 毕克 | BYK-4509是一种用于水溶性和水性体系的应用在金属基材的粘合促进剂。它与大多数粘合剂相匹配，所以是普遍使用的理想选择。 | |
| BYK®-4512 | BYK 毕克 | BYK®-4512是一种用于水溶性和水性体系的应用在金属基材的粘合促进剂。它特别适用于不含铬酸盐的处理剂以及预先用无铬酸盐的方式处理过的金属基板上。 | |
| BYK®-9076 | BYK 毕克 | BYK®-9076是一种高分子量助剂，适用于无溶剂胶粘剂和密封剂，BYK®-9076尤其适用于酸性和中性炭黑的稳定 | |
| BYK®-9077 | BYK 毕克 | 用于无溶剂型浓缩颜料的新型高分子添加剂，用来稳定基本型碳黑。低黏度、高颜料承载量；在羟基官能聚醚/增塑剂等无溶剂型载体中稳定。 | |
| BYK®-A 530 | BYK 毕克 | 脱气剂和消泡剂，适合溶剂型和无溶剂环氧体系 | |
| BYK®-A 535 | BYK 毕克 | 无硅消泡剂/脱气剂，适用于无溶剂和溶剂型环氧和PUR基胶粘剂和密封剂 | |
| BYK®-A 550 | BYK 毕克 | BYK®-A 550具有强脱气效果，却不会导致强雾影效果 | |
| BYK®-A 555 | BYK 毕克 | BYK®-A 555应用于各种胶粘剂具有最高效率 | |
| BYK®-DYNWET 800 | BYK 毕克 | BYK®-DYNWET 800是一种无硅表面助剂，适用于水性胶粘剂和密封剂。它可降低快速施工过程中的动态表面张力，从而改善基材润湿性 | |
| BYK-P 2710 | BYK 毕克 | BYK-P 2710 is a processing additive for solvent-free and solvent-borne epoxy resins for the adjustment of rheological properties of 2-K systems in combination with hydrophilic fumed silica (Thixbreaker). | |
| BYK-P 2720 | BYK 毕克 | BYK-P 2720 is a rheology additive for solvent-free and solvent-borne amine hardeners to enhance the rheological properties of two-component systems in combination with hydrophilic fumed silica (Thixbooster). | |
| BYK®-W 940 | BYK 毕克 | BYK®-W 940可阻止矿物填料例如碳酸钙和三氢氧化铝的沉降，并减少无机和有机颜料的浮色和发花 | |
| BYK®-W 961 | BYK 毕克 | BYK®-W 961可作为润湿和分散剂，阻止矿物填料沉降 | |
| BYK®-W 966 | BYK 毕克 | BYK®-W 966可增加聚酯树脂体系中各种最常用填料例如碳酸钙和三氢氧化铝的分散。它可降低粘度，从而使更高颜填料负载量成为可能，它还可防止沉降 | |
| BYK®-W 969 | BYK 毕克 | BYK®-W 969可作为胶粘剂和密封剂的润湿和分散剂，并降低其粘度 | |
| BYK®-W 980 | BYK 毕克 | BYK®-W 980可增加各种最常用填料例如碳酸钙和三氢氧化铝的分散。它可降低粘度，从而使更高颜填料负载量成为可能，它还可防止沉降 | |
| BYK®-W 985 | BYK 毕克 | BYK®-W 985可增加最常用填料例如碳酸钙和三氢氧化铝的润湿和分散速度。它可极大地降低粘度，从而使更高颜填料负载量成为可能。BYK®-W 985通常不起防沉降作用 | |
| BYKANOL-A | BYK 毕克 | BYKANOL-A is an anti-gelling additive for solvent-borne coatings to prevent increased viscosity in air-drying and baking coatings, gelling in long-term storage, and skin formation in oxidative-drying systems. Suitable for post addition. | |
| BYKJET-9171 | BYK 毕克 | BYKJET-9171 is a solvent-free wetting and dispersing additive for aqueous inkjet inks.It is particularly suitable for stabilizing organic pigments and disperse dyes. It greatly reduces the viscosity of the mill base, which enables a higher pigment content...展开 BYKJET-9171 is a solvent-free wetting and dispersing additive for aqueous inkjet inks.It is particularly suitable for stabilizing organic pigments and disperse dyes. It greatly reduces the viscosity of the mill base, which enables a higher pigment content in pigment concentrates. It is particularly recommended for binder-free grinding. 收起 | |
| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| CLAYTONE 34 | BYK 毕克 | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...展开 CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. 收起 | |
| CLAYTONE® 40 | BYK 毕克 | Claytone® 40是一种亲有机膨润土衍生物，用作触变增稠剂和抗沉降剂，用于低到中等极性溶剂型涂料。这是一个传统的有机粘土，需要添加活化剂以获取充分的效能。作为亲有机的蒙脱石产品，它可以在有机介质中溶胀，并建立一种凝胶结构（纸房状构造）。单蒙脱石片层之间的弱氢键是此触变凝胶结构的原因。为了获取最佳效率，片层的完全分离是必要的（附聚物解聚成初级粒子完全分散）。 | |
| CLAYTONE® AF | BYK 毕克 | Claytone® AF是一种改性蒙脱石，用于含低到中等极性的脂肪族溶剂和脂肪族 - 芳香族溶剂混合物的体系。Claytone®产生可重复的黏度和触变控制，高程度流挂控制，并防止颜料沉降。Claytone® AF是自分散的，不需要极性活化剂。Claytone® AF无需高剪切力或预凝胶。 | |
| CLAYTONE® APA | BYK 毕克 | Claytone® APA是一种改性蒙脱石，用于含中等到高极性的芳香族溶剂或芳香族氧化物溶剂混合物的体系。Claytone® APA具有高凝胶效率、可重复的黏度和触变控制，高程度流挂控制，并防止颜料和填料沉降。 | |
| CLAYTONE® HT | BYK 毕克 | Claytone® HT是一种改性蒙脱石，用于含低到中等极性的芳香族溶剂和脂肪族溶剂的体系。Claytone® HT具有高凝胶效率、可重复的黏度和触变控制，高程度流挂控制，并防止颜料和填料沉降。本产品是一种高性能的流变助剂，用于在高性能的油性涂料，特别适合于工业、船舶和防护涂料。 | |
| CLAYTONE® HY | BYK 毕克 | Claytone® HY是一种改性蒙脱石，用于低到中等极性的印刷油墨。Claytone® HY具有高凝胶效率、可增加黏度和屈服值，防止颜料聚集、沉降，减少起雾，并使油墨生产商可控制粘性粘度。 | |
| CLAYTONE-40 | BYK 毕克 | TIXOGEL® VP是一个触变、防沉降剂，可用于低到中等极性体系。为了达到最佳的效率，TIXOGEL® VP应使用高剪切力分散。 | |
| CLAYTONE-EM | BYK 毕克 | CLAYTONE-EM is a high efficiency rheological additive suitable for use in synthetic base fluids and all-oil systems to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-ER | BYK 毕克 | CLAYTONE-ER is a high efficiency rheological additive suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-IMG 400 | BYK 毕克 | CLAYTONE-IMG 400 is a general purpose rheological additive for diesel and mineral oil based drilling fluids to increase the carrying capacity and hole cleaning capabilities. | |
| CLAYTONE-MPZ | BYK 毕克 | TIXOGEL® MPZ是最高性能有机粘土系列产品。它是一种高效触变增稠剂、抗沉降剂，用于中等到高极性的的系统。高极性体系中没必要添加活化剂是一种规则，但对于中等极性体系有益。 | |
| CLAYTONE-SF | BYK 毕克 | CLAYTONE-SF is an ultra high efficiency rheological suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展开 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展开 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-117 | DCC (Dairen Chemical Corp.) | DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展开 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起 | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展开 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展开 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展开 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起 | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起 | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起 | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起 | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起 | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展开 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起 | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展开 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起 | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...展开 DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. 收起 | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展开 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起 | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展开 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起 |
