| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展开 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| COPONYL™ 5065 | Nippon Gohsei | COPONYL™ 5065 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides high-speed peeling characteristics and is residue free. Applications include masking tapes and protective masking...展开 COPONYL™ 5065 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides high-speed peeling characteristics and is residue free. Applications include masking tapes and protective masking films. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ 5411 | Nippon Gohsei | COPONYL™ 5411 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides permanent adhesion, and is suitable for thick-layer application. Applications include double-sided tapes and foam...展开 COPONYL™ 5411 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides permanent adhesion, and is suitable for thick-layer application. Applications include double-sided tapes and foam tapes. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ 5560 | Nippon Gohsei | COPONYL™ 5560 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and isopropyl alcohol solvents. It is a one-component cross-linkage product. Applications include films and labels. This product is well ...展开 COPONYL™ 5560 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and isopropyl alcohol solvents. It is a one-component cross-linkage product. Applications include films and labels. This product is well suited for use in adhesives. 收起 | |
| COPONYL™ 5672 | Nippon Gohsei | COPONYL™ 5672 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides strong adhesion and good removability. Applications include films and labels, masking tapes, and protective maski...展开 COPONYL™ 5672 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides strong adhesion and good removability. Applications include films and labels, masking tapes, and protective masking films. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ 5697 | Nippon Gohsei | COPONYL™ 5697 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It is a general use hard-type resin used in PVC backing materials. This product is well suited for use in adhesives. | |
| COPONYL™ 5698 | Nippon Gohsei | COPONYL™ 5698 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It is a general use soft-type resin used in PVC backing materials. This product is well suited for use in adhesives. | |
| COPONYL™ 5705L | Nippon Gohsei | COPONYL™ 5705L is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides strong adhesion and low tack. Applications include masking tapes and protective masking films. This product is w...展开 COPONYL™ 5705L is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides strong adhesion and low tack. Applications include masking tapes and protective masking films. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ 5706-A | Nippon Gohsei | COPONYL™ 5706-A is a pressure sensitive adhesive resin formulated from acrylic acid ester using toluene and cellosolve solvents. It is ideal for screen coatings. This product is well suited for use in adhesives. | |
| COPONYL™ 5740 | Nippon Gohsei | COPONYL™ 5740 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides slight adhesion, good removability, heat resistance, and is residue free. Applications include masking tapes, pro...展开 COPONYL™ 5740 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides slight adhesion, good removability, heat resistance, and is residue free. Applications include masking tapes, protective masking films, and processing. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ 8065 | Nippon Gohsei | COPONYL™ 8065 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. This product is well suited for use in adhesives in medical applications such as fixing tapes for cataplasm and elastics. | |
| COPONYL™ 8137 | Nippon Gohsei | COPONYL™ 8137 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good adhesion at low temperatures. Applications include films and labels. This product is well suited for use in ...展开 COPONYL™ 8137 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good adhesion at low temperatures. Applications include films and labels. This product is well suited for use in adhesives. 收起 | |
| COPONYL™ 8694 | Nippon Gohsei | COPONYL™ 8694 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides strong adhesion and good removability. Applications include films and labels, masking tapes, and protective maski...展开 COPONYL™ 8694 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides strong adhesion and good removability. Applications include films and labels, masking tapes, and protective masking films. This product is well suited for use in adhesives. 收起 | |
| COPONYL™ 8700 | Nippon Gohsei | COPONYL™ 8700 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It has good adhesion to olefin and is suitable for short-aging time. Applications include double-sided tapes and foam tapes. ...展开 COPONYL™ 8700 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It has good adhesion to olefin and is suitable for short-aging time. Applications include double-sided tapes and foam tapes. This product is well suited for use in adhesives. 收起 | |
| COPONYL™ 8708 | Nippon Gohsei | COPONYL™ 8708 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good adhesion at low temperature. Applications include double-sided tapes and foam tapes. This product is well su...展开 COPONYL™ 8708 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good adhesion at low temperature. Applications include double-sided tapes and foam tapes. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ 8711 | Nippon Gohsei | COPONYL™ 8711 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It has good processability and heat resistance. Applications include double-sided tapes and foam tapes. This product is well ...展开 COPONYL™ 8711 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It has good processability and heat resistance. Applications include double-sided tapes and foam tapes. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ 8815 | Nippon Gohsei | COPONYL™ 8815 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good removability, is residue free, and has weather resistance properties. Applications include masking tapes and...展开 COPONYL™ 8815 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good removability, is residue free, and has weather resistance properties. Applications include masking tapes and protective masking films. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ 8976L | Nippon Gohsei | COPONYL™ 8976L is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good heat resistance. Applications include films and labels. This product is well suited for use in adhesives. | |
| COPONYL™ N-2031 | Nippon Gohsei | COPONYL™ N-2031 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. This product provides different levels of adhesive properties depending on temperature. Applications include masking tapes ...展开 COPONYL™ N-2031 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. This product provides different levels of adhesive properties depending on temperature. Applications include masking tapes and protective masking films. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ N-2147 | Nippon Gohsei | COPONYL™ N-2147 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides heat resistance, dimension stability, and is suitable for window film. Applications include films and labels, P...展开 COPONYL™ N-2147 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides heat resistance, dimension stability, and is suitable for window film. Applications include films and labels, PVC backing materials, and optical. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ N-2260 | Nippon Gohsei | COPONYL™ N-2260 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides low adhesion, high tack, is heat resistant, and residue free. Applications include masking tapes, protective ma...展开 COPONYL™ N-2260 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides low adhesion, high tack, is heat resistant, and residue free. Applications include masking tapes, protective masking films, and processing. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ N-2332 | Nippon Gohsei | COPONYL™ N-2332 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. The characteristics of this product are low adherence and soft type. This product is well suited for use in adhesives for m...展开 COPONYL™ N-2332 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. The characteristics of this product are low adherence and soft type. This product is well suited for use in adhesives for medical applications. 收起 | |
| COPONYL™ N-2584 | Nippon Gohsei | COPONYL™ N-2584 is a pressure-sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and methanol solvents. It is alkaline soluble and suitable for splicing labels and paper. This product is well suited for use in adhesi...展开 COPONYL™ N-2584 is a pressure-sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and methanol solvents. It is alkaline soluble and suitable for splicing labels and paper. This product is well suited for use in adhesive labels and films. 收起 | |
| COPONYL™ N-3449L | Nippon Gohsei | COPONYL™ N-3449L is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides good adhesion to olefin. Applications include masking tapes and protective masking films. This produ...展开 COPONYL™ N-3449L is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides good adhesion to olefin. Applications include masking tapes and protective masking films. This product is well suited for use in adhesives. 收起 | |
| COPONYL™ N-3483 | Nippon Gohsei | COPONYL™ N-3483 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. Applications include masking tapes and protective masking films. This product is well suited for use in adhesives. | |
| COPONYL™ N-3495HS | Nippon Gohsei | COPONYL™ N-3495HS is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides good adhesion to olefin. Applications include masking tapes, protective masking films, double-sided...展开 COPONYL™ N-3495HS is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides good adhesion to olefin. Applications include masking tapes, protective masking films, double-sided tapes, and foam tapes. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ N-3581 | Nippon Gohsei | COPONYL™ N-3581 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It has good wettability, and good adhesion to rough surfaces. Applications include masking tapes, protective masking films,...展开 COPONYL™ N-3581 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It has good wettability, and good adhesion to rough surfaces. Applications include masking tapes, protective masking films, and processing. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ N-3816E | Nippon Gohsei | COPONYL™ N-3816E is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It has good durability and is suitable for optical film applications. This product is well suited for use in electronics and adhesives. | |
| COPONYL™ N-3933E | Nippon Gohsei | COPONYL™ N-3933E is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good adhesion for rounded surfaces and labels for refrigerated food. Applications include films and labels. Th...展开 COPONYL™ N-3933E is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good adhesion for rounded surfaces and labels for refrigerated food. Applications include films and labels. This product is well suited for use in adhesives. 收起 | |
| COPONYL™ N-4399 | Nippon Gohsei | COPONYL™ N-4399 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides slight adhesion, adhesion to rough surfaces, and is residue free. Applications include masking tapes,...展开 COPONYL™ N-4399 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides slight adhesion, adhesion to rough surfaces, and is residue free. Applications include masking tapes, protective masking films, and processing. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ N-4495 | Nippon Gohsei | COPONYL™ N-4495 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides high-speed peeling characteristics. Applications include masking tapes, protective masking films, and processin...展开 COPONYL™ N-4495 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides high-speed peeling characteristics. Applications include masking tapes, protective masking films, and processing. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ N-4510 | Nippon Gohsei | COPONYL™ N-4510 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It has good repulsion resistance. Applications include double-sided tapes and foam tapes. This product is well suited for u...展开 COPONYL™ N-4510 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It has good repulsion resistance. Applications include double-sided tapes and foam tapes. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ N-4519L | Nippon Gohsei | COPONYL™ N-4519L is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides strong adhesion and high tack. Applications include masking tapes and protective masking films. This...展开 COPONYL™ N-4519L is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides strong adhesion and high tack. Applications include masking tapes and protective masking films. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ N-6593 | Nippon Gohsei | COPONYL™ N-6593 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It has good durability and is suitable for optical film applications. This product is well suited for use in electronics and adhesives. | |
| COPONYL™ N-6803 | Nippon Gohsei | COPONYL™ N-6803 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It is formulated to provide good corrosion resistance and for use in thin-layer optical applications. This product is well suited for us...展开 COPONYL™ N-6803 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It is formulated to provide good corrosion resistance and for use in thin-layer optical applications. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ N-6941 | Nippon Gohsei | COPONYL™ N-6941 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It provides good bubble resistance, has good durability, and is ideal for thin layer application. This product is well suited for use in...展开 COPONYL™ N-6941 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It provides good bubble resistance, has good durability, and is ideal for thin layer application. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ N-7136 | Nippon Gohsei | COPONYL™ N-7136 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and methyl ethyl ketone solvents. It is acid free and ideal for optical applications. This product is well suited for use in electronics and adhe...展开 COPONYL™ N-7136 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and methyl ethyl ketone solvents. It is acid free and ideal for optical applications. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ N-7166 | Nippon Gohsei | COPONYL™ N-7166 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, methyl ethyl ketone solvents. It provides good corrosion resistance, and is ideal for thin layer application. This product is well suit...展开 COPONYL™ N-7166 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, methyl ethyl ketone solvents. It provides good corrosion resistance, and is ideal for thin layer application. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ N-7245 | Nippon Gohsei | COPONYL™ N-7245 is a pressure-sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and methyl ethyl ketone solvents. This product is well suited for use in electronic and adhesive applications, especially thick-layer o...展开 COPONYL™ N-7245 is a pressure-sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and methyl ethyl ketone solvents. This product is well suited for use in electronic and adhesive applications, especially thick-layer optical films. 收起 | |
| COPONYL™ N-7482 | Nippon Gohsei | COPONYL™ N-7482 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It provides good adhesion at low temperature. Applications include double-sided tapes and foam tapes. This product is well suited for us...展开 COPONYL™ N-7482 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It provides good adhesion at low temperature. Applications include double-sided tapes and foam tapes. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ N-7483 | Nippon Gohsei | COPONYL™ N-7483 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It provides good removability. Applications include double-sided tapes and foam tapes. This product is well suited for use in electronic...展开 COPONYL™ N-7483 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It provides good removability. Applications include double-sided tapes and foam tapes. This product is well suited for use in electronics and adhesives. 收起 | |
| COPONYL™ N-7486 | Nippon Gohsei | COPONYL™ N-7486 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and acetone solvents. It provides general type adhesive properties and punching processability. Applications include films and labels. This produ...展开 COPONYL™ N-7486 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and acetone solvents. It provides general type adhesive properties and punching processability. Applications include films and labels. This product is well suited for use in adhesives. 收起 | |
| COPONYL™ N-7487 | Nippon Gohsei | COPONYL™ N-7487 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and acetone solvents. It provides high transparency and punching processability. Applications include films and labels. This product is well suit...展开 COPONYL™ N-7487 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and acetone solvents. It provides high transparency and punching processability. Applications include films and labels. This product is well suited for use in adhesives. 收起 | |
| COPONYL™ N-7520 | Nippon Gohsei | COPONYL™ N-7520 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It provides good corrosion resistance, good whitening resistance, and is ideal for thin layer application. This product is well suited f...展开 COPONYL™ N-7520 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It provides good corrosion resistance, good whitening resistance, and is ideal for thin layer application. This product is well suited for use in electronics and adhesives. 收起 | |
| Dimer Acid | Anhui Elite Industrial Co., Ltd | Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起 | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| HR-A5100 | Zhejiang Chembest United Industrial Co., Ltd. | HR-A5100, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ...展开 HR-A5100, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起 | |
| HR-A5101 | Zhejiang Chembest United Industrial Co., Ltd. | HR-A5101, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ho...展开 HR-A5101, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起 | |
| HR-A5110 | Zhejiang Chembest United Industrial Co., Ltd. | HR-A5110, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ho...展开 HR-A5110, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起 | |
| HR-A5120 | Zhejiang Chembest United Industrial Co., Ltd. | HR-A5120, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ho...展开 HR-A5120, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展开 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展开 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展开 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展开 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展开 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Mowinyl 081F | Nippon Gohsei | Mowinyl 081F is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With good heat sealing properties, transparency of film, and adhesion to plastics, this product is well suited for use in adhesive and laminate applicat...展开 Mowinyl 081F is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With good heat sealing properties, transparency of film, and adhesion to plastics, this product is well suited for use in adhesive and laminate applications. 收起 | |
| Mowinyl 082 | Nippon Gohsei | Mowinyl 082 is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With good heat sealing properties, transparency of film, and adhesion to PE, this product is well suited for use in adhesive and laminate applications. | |
| Mowinyl 109E | Nippon Gohsei | Mowinyl 109E is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With good adhesion to polyvinyl, plywood, plastic, and paper surfaces, this product is well suited for use in adhesive and laminate applications. | |
| Mowinyl 127N | Nippon Gohsei | Mowinyl 127N is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion, a longer open time, and good mechanical stability, this product is well suited for use in woodworking and plywood adhesives and laminates. | |
| Mowinyl 128N | Nippon Gohsei | Mowinyl 128N is a water-based synthetic resin emulsion composed of vinyl acetate. With good general adhesion properties, this product is well suited for use in woodworking, plywood, and packaging adhesive applications. | |
| Mowinyl 135N | Nippon Gohsei | Mowinyl 135N is a water-based synthetic resin emulsion composed of vinyl acetate. With high viscosity and good adhesion properties, this product is well suited for use in woodworking and plywood adhesives and laminates. | |
| Mowinyl 138N | Nippon Gohsei | Mowinyl 138N is a water-based synthetic resin emulsion composed of vinyl acetate. With good adhesion and compatibility with urea-formaldehyde, this product is well suited for use in woodworking and plywood adhesives and and laminates. | |
| Mowinyl 168N | Nippon Gohsei | Mowinyl 168N is a water-based synthetic resin emulsion composed of vinyl acetate. With good mechanical stability and a longer open time, this product is well suited for use in woodworking, plywood, and packaging adhesives. | |
| Mowinyl 172E | Nippon Gohsei | Mowinyl 172E is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With good adhesion and temperature resistance, this product is well suited for use in bookbinding and plastic and paper laminating applications. | |
| Mowinyl 180E | Nippon Gohsei | Mowinyl 180E is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With high ethylene content and good adhesion, especially to polyvinyl and other plastics, this product is well suited for use in adhesive and laminate a...展开 Mowinyl 180E is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With high ethylene content and good adhesion, especially to polyvinyl and other plastics, this product is well suited for use in adhesive and laminate applications. 收起 | |
| Mowinyl 185EK | Nippon Gohsei | Mowinyl 185EK is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With high solids content and good adhesion to polyvinyl, plywood, plastic, and paper surfaces, this product is well suited for use in adhesive and lami...展开 Mowinyl 185EK is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With high solids content and good adhesion to polyvinyl, plywood, plastic, and paper surfaces, this product is well suited for use in adhesive and laminate applications. 收起 | |
| Mowinyl 461 | Nippon Gohsei | Mowinyl 461 is a synthetic acrylic resin emulsion that provides good adhesion, high tack, and good retention for olefins. This product is well suited for use in film- and paper-type adhesive label and tape applications. | |
| Mowinyl 462 | Nippon Gohsei | Mowinyl 462 is a synthetic acrylic resin emulsion that provides good adhesion, high tack, and good retention for olefins. This product is well suited for use in film- and paper-type adhesive label and tape applications. | |
| Mowinyl 490 | Nippon Gohsei | Mowinyl 490 is a synthetic acrylic resin emulsion that features good adhesion, high tack, and a transparent starch type. This product is well suited for use in adhesive film sheet and tape applications. | |
| Mowinyl 500N | Nippon Gohsei | Mowinyl 500N is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion, sprayability, and anticorrosion properties, this product is well suited for use in packaging adhesive and laminate applications. | |
| Mowinyl 502N | Nippon Gohsei | Mowinyl 502N is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion, stable viscosity at low temperature, and excellent pressure resistance strength, this product is well suited for use in packaging adhesive and la...展开 Mowinyl 502N is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion, stable viscosity at low temperature, and excellent pressure resistance strength, this product is well suited for use in packaging adhesive and laminate applications. 收起 | |
| Mowinyl 503N | Nippon Gohsei | Mowinyl 503N is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion and stable viscosity at low temperature, this product is well suited for use in packaging adhesive and laminate applications. | |
| Mowinyl 504N | Nippon Gohsei | Mowinyl 504N is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion and stable viscosity at low temperature, this product is well suited for use in packaging adhesive and laminate applications. | |
| Mowinyl 590N | Nippon Gohsei | Mowinyl 590N is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion, a longer open time, and good anticorrosion properties, this product is well suited for use in packaging adhesive and laminate applications. | |
| Mowinyl 650 | Nippon Gohsei | Mowinyl 650 is a water-based synthetic resin emulsion composed of a vinyl acetate/acrylic copolymer. With good adhesion to polyolefin substrates, this product is well suited for use in packaging adhesive applications. | |
| Mowinyl 6610 | Nippon Gohsei | Mowinyl 6610 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. Crosslinkable by isocyanate and featuring good mechanical stability, this product is well suited for use in woodworking adhesive and laminate applications. | |
| Mowinyl 6720 | Nippon Gohsei | Mowinyl 6720 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good adherence to films and topcoats, this product is well suited for use in primer and sealer applications. | |
| Mowinyl 743N | Nippon Gohsei | Mowinyl 743N is a synthetic acrylic resin emulsion that provides good adherence and alkaline resistance. This product is well suited for use in primers, sealers, paints, and coatings. | |
| Mowinyl 745 | Nippon Gohsei | Mowinyl 745 is a synthetic acrylic resin emulsion with an added auxiliary filming agent. This product is well suited for use in clear coats, sealers, and gloss varnishes for paper. | |
| Mowinyl 760H | Nippon Gohsei | Mowinyl 760H is a water-based synthetic resin emulsion composed of a vinyl acetate/acrylic copolymer. Self-crosslinking and featuring has good adhesion with plastics and synthetic fibers, this product is well suited for use in laminate and bookbinding adh...展开 Mowinyl 760H is a water-based synthetic resin emulsion composed of a vinyl acetate/acrylic copolymer. Self-crosslinking and featuring has good adhesion with plastics and synthetic fibers, this product is well suited for use in laminate and bookbinding adhesive applications. 收起 | |
| Mowinyl 761HG | Nippon Gohsei | Mowinyl 761HG is a water-based synthetic resin emulsion composed of a vinyl acetate/acrylic copolymer. Self-crosslinking and featuring good mechanical stability, this product is well suited for use in packaging adhesive and laminate applications. | |
| Mowinyl 763 | Nippon Gohsei | Mowinyl 763 is a water-based synthetic resin emulsion composed of a vinyl acetate/acrylic copolymer. With good adhesion properties, this product is well suited for use in textile and paper laminate applications. | |
| Mowinyl 771H | Nippon Gohsei | Mowinyl 771H is a water-based synthetic resin emulsion composed of a vinyl acetate/acrylic copolymer. Self-crosslinking and featuring good initial adhesion and heat resistance, this product is well suited for use in woodworking, plywood, and canvas wood f...展开 Mowinyl 771H is a water-based synthetic resin emulsion composed of a vinyl acetate/acrylic copolymer. Self-crosslinking and featuring good initial adhesion and heat resistance, this product is well suited for use in woodworking, plywood, and canvas wood filling adhesive applications. 收起 | |
| Mowinyl 7980 | Nippon Gohsei | Mowinyl 7980 is a synthetic acrylic resin emulsion that provides good heat sealing properties, transparency, and adhesion to plastics. This product is well suited for use in film and label adhesive applications. | |
| Mowinyl 880 | Nippon Gohsei | Mowinyl 880 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. Featuring good miscible stability with colloidal silica, this product is well suited for use in clear coat and sealer applications. | |
| Mowinyl 940 | Nippon Gohsei | Mowinyl 940 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good adherence to base materials, this product is well suited for use in primer and sealer applications. | |
| Mowinyl 987B | Nippon Gohsei | Mowinyl 987B is a synthetic acrylic resin emulsion that provides good adhesion to heat-resistant and water-resistant materials. This product is well suited for use in aluminum foil and paper laminate applications. | |
| Mowinyl A24EN | Nippon Gohsei | Mowinyl A24EN is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion, a longer open time, and good winter functionality, this product is well suited for use in packaging and paper adhesive applications. |
