UL Prospector
Prospector

成功!

成功保存搜索结果
34 条结果
Calcium Sulfate Whisker Shanghai Tengmin Industry Co., Ltd. Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials.
Dimer Acid Anhui Elite Industrial Co., Ltd Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起
EXOCOAT™ AM Axcentive Sarl EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起
Fumed Silica 972 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
Fumed Silica 974 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
Fumed Silica (A-150) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起
Fumed Silica (A-200) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica (A-380) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
HR-A5100 Zhejiang Chembest United Industrial Co., Ltd. HR-A5100, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ...展开 HR-A5100, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起
HR-A5101 Zhejiang Chembest United Industrial Co., Ltd. HR-A5101, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ho...展开 HR-A5101, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起
HR-A5110 Zhejiang Chembest United Industrial Co., Ltd. HR-A5110, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ho...展开 HR-A5110, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起
HR-A5120 Zhejiang Chembest United Industrial Co., Ltd. HR-A5120, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ho...展开 HR-A5120, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起
Ketjenflex® 12 Axcentive Sarl Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展开 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起
Ketjenflex® 6 Axcentive Sarl Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more.
Ketjenflex® 8 Axcentive Sarl Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...展开 Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. 收起
Ketjenflex® 9S Axcentive Sarl Ketjenflex® 9S is a toluene sulfonamide in the form of white crystalline powder. It is used as a reactive plasticizer in coatings and adhesives and provides fungicidal activity in coatings. Ketjenflex® 9S can be used in melamine laminates and coatings, wo...展开 Ketjenflex® 9S is a toluene sulfonamide in the form of white crystalline powder. It is used as a reactive plasticizer in coatings and adhesives and provides fungicidal activity in coatings. Ketjenflex® 9S can be used in melamine laminates and coatings, wood adhesives, epoxy and polyurethane coatings and adhesives, and other applications. 收起
Ketjenflex® CP Axcentive Sarl Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings.
Ketjenflex® MH Axcentive Sarl Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...展开 Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. 收起
Ketjenflex® MS 80 Axcentive Sarl Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...展开 Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. 收起
Silane Coupling Agent ELT-S 550 Anhui Elite Industrial Co., Ltd Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of ad...展开 Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of adhesives and coatings. 收起
Silane Coupling Agent ELT-S 551 Anhui Elite Industrial Co., Ltd Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in ad...展开 Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in adhesives and coatings. 收起
Silane Coupling Agent ELT-S 602 Anhui Elite Industrial Co., Ltd Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an a...展开 Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an adhesion promoter in adhesives and sealants. 收起
Silane Coupling Agent ELT-S 792 Anhui Elite Industrial Co., Ltd Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 ...展开 Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 acts as an adhesion promoter in PVC-based sealants. 收起
Silicon Dioxide GJ-103 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase th...展开 Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide JLJ-105 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is...展开 Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide NY-102 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bondin...展开 Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide SP-106 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is a...展开 Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide TL-104 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase m...展开 Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide XJ-100 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide XJ-100 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties.
Silicon Dioxide XJ-101 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide XJ-101 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties.
Silicon Dioxide ZZ-108 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide ZZ-108 is a transparent white powder that has high bulkiness and water-solubility properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength, and it is also used in paints and coatings.
Thanox 330 Rianlon Chemical Co., Ltd. Thanox 330 is a phenolic antioxidant in the form of a white to off-white powder. It is resistant to water and solvent extraction and has been shown to decrease water carry over in water-quenched polypropylene film lines. Thanox 330 can be used in adhesive...展开 Thanox 330 is a phenolic antioxidant in the form of a white to off-white powder. It is resistant to water and solvent extraction and has been shown to decrease water carry over in water-quenched polypropylene film lines. Thanox 330 can be used in adhesive applications. 收起
Vinyl Polymer Resin (VAH) ELT-VAAL Anhui Elite Industrial Co., Ltd Vinyl Polymer Resin (VAH) ELT-VAAL is a white or slight yellow powder which has a high molecular weight. This product has a molecular weight of 25000 and is also crosslinkable with amino resins, polyisocyanates, and other generic resins. This product pr...展开 Vinyl Polymer Resin (VAH) ELT-VAAL is a white or slight yellow powder which has a high molecular weight. This product has a molecular weight of 25000 and is also crosslinkable with amino resins, polyisocyanates, and other generic resins. This product provides blocking resistance, sand-ability, adhesion, and resistance to paint, coatings, adhesives, and inks. 收起
Vinyl Polymer Resin VAM Resin Anhui Elite Industrial Co., Ltd Vinyl Polymer Resin VAM Resin is a white powder with a high molecular weight. This product has a viscosity between 40 and 48 and is also approved for food contact applications by the FDA. Vinyl Polymer Resin VAM Resin provides flexibility and adhesion to...展开 Vinyl Polymer Resin VAM Resin is a white powder with a high molecular weight. This product has a viscosity between 40 and 48 and is also approved for food contact applications by the FDA. Vinyl Polymer Resin VAM Resin provides flexibility and adhesion to paint, coatings, adhesives, and inks. 收起