UL Prospector

成功!

成功保存搜索结果
Calcium Sulfate Whisker Shanghai Tengmin Industry Co., Ltd. Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials.
Dimer Acid Anhui Elite Industrial Co., Ltd Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起
Fumed Silica (A-150) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起
Fumed Silica (A-200) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica (A-380) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica 972 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
Fumed Silica 974 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
HR-A5100 Zhejiang Chembest United Industrial Co., Ltd. HR-A5100, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ...展开 HR-A5100, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起
HR-A5101 Zhejiang Chembest United Industrial Co., Ltd. HR-A5101, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ho...展开 HR-A5101, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起
HR-A5110 Zhejiang Chembest United Industrial Co., Ltd. HR-A5110, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ho...展开 HR-A5110, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起
HR-A5120 Zhejiang Chembest United Industrial Co., Ltd. HR-A5120, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in ho...展开 HR-A5120, in the form of a transparent granule, is a C5 hydrocarbon resin. This product can be used in hot-melt adhesives, quick packaging adhesives, bookbinding adhesives, wood adhesives, and in glue sticks. It can also be used as a tackifier resin in hot melt adhesives. 收起
Kancide 6902 Kimberlite Chemicals (India) Pvt. Ltd. Kancide 6902 is an isothiozolinone based biocide that is used to preserve the wet state of aqueous formaldehyde-sensitive formulations. It is a colorless to pale yellow liquid in appearance with a mild odor. This product is VOC free and designed to provid...展开 Kancide 6902 is an isothiozolinone based biocide that is used to preserve the wet state of aqueous formaldehyde-sensitive formulations. It is a colorless to pale yellow liquid in appearance with a mild odor. This product is VOC free and designed to provide a broad activity spectrum against bacteria, yeast and molds in applications such as paints, polymer emulsions, adhesives, ceramic glazes, fillers, and sealants. 收起
Kancide 6992 Kimberlite Chemicals (India) Pvt. Ltd. Kancide 6992 is a colorless to pale yellow liquid in appearance with a mild odor that is used to preserve the wet state of aqueous formaldehyde-sensitive formulations. This product is designed to be used in applications such as paints, polymer emulsions, ...展开 Kancide 6992 is a colorless to pale yellow liquid in appearance with a mild odor that is used to preserve the wet state of aqueous formaldehyde-sensitive formulations. This product is designed to be used in applications such as paints, polymer emulsions, adhesives, ceramic glazes, fillers, and sealants. 收起
Silane Coupling Agent ELT-S 550 Anhui Elite Industrial Co., Ltd Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of ad...展开 Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of adhesives and coatings. 收起
Silane Coupling Agent ELT-S 551 Anhui Elite Industrial Co., Ltd Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in ad...展开 Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in adhesives and coatings. 收起
Silane Coupling Agent ELT-S 602 Anhui Elite Industrial Co., Ltd Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an a...展开 Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an adhesion promoter in adhesives and sealants. 收起
Silane Coupling Agent ELT-S 792 Anhui Elite Industrial Co., Ltd Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 ...展开 Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 acts as an adhesion promoter in PVC-based sealants. 收起
Silicon Dioxide GJ-103 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase th...展开 Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide JLJ-105 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is...展开 Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide NY-102 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bondin...展开 Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide SP-106 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is a...展开 Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide TL-104 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase m...展开 Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide XJ-100 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide XJ-100 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties.
Silicon Dioxide XJ-101 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide XJ-101 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties.
Silicon Dioxide ZZ-108 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide ZZ-108 is a transparent white powder that has high bulkiness and water-solubility properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength, and it is also used in paints and coatings.
Tylose® HS 30000 YP2 SE Tylose GmbH & Co. KG Tylose® HS 30000 YP2 is a water-soluble, non-ionic, highly etherified hydroxyethyl cellulose powder. It provides increased biostability, fast consistency development, high solution clarity and thermal stability, and low sag resitance and water demand. Thi...展开 Tylose® HS 30000 YP2 is a water-soluble, non-ionic, highly etherified hydroxyethyl cellulose powder. It provides increased biostability, fast consistency development, high solution clarity and thermal stability, and low sag resitance and water demand. This grade of hydroxyethyl cellulose (HEC) is ideal for use in emulsion tile adhesives, exterior, interior, and silicone resin paints, drilling fluids, non-woven fabrics, and washing up liquids. 收起
Tylose® MB 10008 P4 SE Tylose GmbH & Co. KG Tylose® MB 10008 P4 is a water-soluble, non-ionic, highly etherified, modified methyl hydroxyethyl cellulose powder. It provides moderate consistency development, very high sag resistance and water demand, moderate water retention and influence on cement ...展开 Tylose® MB 10008 P4 is a water-soluble, non-ionic, highly etherified, modified methyl hydroxyethyl cellulose powder. It provides moderate consistency development, very high sag resistance and water demand, moderate water retention and influence on cement hydration, and low heat stability. This grade of methyl hydroxyethyl cellulose (MHEC) is ideal for use in cement tile adhesives. 收起
Tylose® MB 15009 P2 SE Tylose GmbH & Co. KG Tylose® MB 15009 P2 is a water-soluble, non-ionic, highly etherified, modified methyl hydroxyethyl cellulose powder. It displays moderate consistency development and sag resistance, high water demand, water retention, and influence on cement hydration, an...展开 Tylose® MB 15009 P2 is a water-soluble, non-ionic, highly etherified, modified methyl hydroxyethyl cellulose powder. It displays moderate consistency development and sag resistance, high water demand, water retention, and influence on cement hydration, and low heat stability. This grade of methyl hydroxyethyl cellulose (MHEC) is ideal for use in cement tile adhesives and EIFSs. 收起
Tylose® MB 3003 P4 SE Tylose GmbH & Co. KG Tylose® MB 3003 P4 is a water-soluble, non-ionic, highly etherified, modified methyl hydroxyethyl cellulose powder. It provides moderate consistency development, high sag resistance, water demand, and influence on cement hydration, and low water retention...展开 Tylose® MB 3003 P4 is a water-soluble, non-ionic, highly etherified, modified methyl hydroxyethyl cellulose powder. It provides moderate consistency development, high sag resistance, water demand, and influence on cement hydration, and low water retention and heat stability. This grade of methyl hydroxyethyl cellulose (MHEC) is particularly well-suited for use in cement tile adhesive applications. 收起
Tylose® MH 100001 P6 SE Tylose GmbH & Co. KG Tylose® MH 100001 P6 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. It displays very fast consistency development, very high water retention, low influence on cement hydration, moderate sag resis...展开 Tylose® MH 100001 P6 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. It displays very fast consistency development, very high water retention, low influence on cement hydration, moderate sag resistance, and moderate water demand. This grade of methyl hydroxyethyl cellulose (MHEC) is ideal for use in cement skim coats and cement tile adhesives. 收起
Tylose® MH 10015 P4 SE Tylose GmbH & Co. KG Tylose® MH 10015 P4 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. It provides fast consistency development, very high sag resistance and water demand, moderate water retention and influence on c...展开 Tylose® MH 10015 P4 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. It provides fast consistency development, very high sag resistance and water demand, moderate water retention and influence on cement hydration, and high heat stability. This grade of methyl hydroxyethyl cellulose (MHEC) is ideal for use in cement tile adhesives. 收起
Tylose® MH 10016 P4 SE Tylose GmbH & Co. KG Tylose® MH 10016 P4 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. It displays fast consistency development, very high sag resistance and water demand, moderate water retention and influence on c...展开 Tylose® MH 10016 P4 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. It displays fast consistency development, very high sag resistance and water demand, moderate water retention and influence on cement hydration, and high heat stability. This grade of methyl hydroxyethyl cellulose (MHEC) is ideal for use in cement tile adhesives. 收起
Tylose® MH 15002 P6 SE Tylose GmbH & Co. KG Tylose® MH 15002 P6 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. It provides fast consistency development, moderate sag resistance, high water demand and water retention, and low influence on c...展开 Tylose® MH 15002 P6 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. It provides fast consistency development, moderate sag resistance, high water demand and water retention, and low influence on cement hydration. This grade of methyl hydroxyethyl cellulose (MHEC) is particularly well-suited for use in block laying adhesive and cement render applications. 收起
Tylose® MH 20007 P4 SE Tylose GmbH & Co. KG Tylose® MH 20007 P4 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. It displays fast consistency development, very high sag resistance and water demand, moderate water retention and influence on c...展开 Tylose® MH 20007 P4 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. It displays fast consistency development, very high sag resistance and water demand, moderate water retention and influence on cement hydration, and high heat stability. This grade of methyl hydroxyethyl cellulose (MHEC) is ideal for use in cement tile adhesives. 收起
Tylose® MH 60001 P4 SE Tylose GmbH & Co. KG Tylose® MH 60001 P4 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. It displays very fast consistency development, moderate sag resistance and water demand, very high water retention, and low infl...展开 Tylose® MH 60001 P4 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. It displays very fast consistency development, moderate sag resistance and water demand, very high water retention, and low influence on cement hydration. This grade of methyl hydroxyethyl cellulose (MHEC) is particularly well-suited for use in cement one coat, cement tile adhesive, gypsum mounting binder, and gypsum troweling compound applications. 收起
Tylose® MH 60004 P6 SE Tylose GmbH & Co. KG Tylose® MH 60004 P6 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. It displays very fast consistency development, moderate sag resistance and water demand, very high water retention, and low infl...展开 Tylose® MH 60004 P6 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. It displays very fast consistency development, moderate sag resistance and water demand, very high water retention, and low influence on cement hydration. This grade of methyl hydroxyethyl cellulose (MHEC) is ideal for use in cement tile adhesives. 收起
Tylose® MH 60010 P4 SE Tylose GmbH & Co. KG Tylose® MH 60010 P4 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. It provides very fast consistency development, moderate sag resistance, high water demand and water retention, and moderate infl...展开 Tylose® MH 60010 P4 is a water-soluble, non-ionic, modified methyl hydroxyethyl cellulose powder with standard etherification. It provides very fast consistency development, moderate sag resistance, high water demand and water retention, and moderate influence on cement hydration. This grade of methyl hydroxyethyl cellulose (MHEC) is ideal for use in cement renders, tile adhesives, and gypsum plasters and compounds. 收起
Tylose® MHS 150003 P4 SE Tylose GmbH & Co. KG Tylose® MHS 150003 P4 is a water-soluble, non-ionic, highly etherified, modified methyl hydroxyethyl cellulose powder. It provides very fast consistency development, high water demand, water retention, and heat stability, and moderate sag resistance and i...展开 Tylose® MHS 150003 P4 is a water-soluble, non-ionic, highly etherified, modified methyl hydroxyethyl cellulose powder. It provides very fast consistency development, high water demand, water retention, and heat stability, and moderate sag resistance and influence on cement hydration. This grade of methyl hydroxyethyl cellulose (MHEC) is ideal for use in block laying adhesives and gypsum mounting binders and spray plasters. 收起
Tylose® MHS 30024 P4 SE Tylose GmbH & Co. KG Tylose® MHS 30024 P4 is a water-soluble, non-ionic, highly etherified, modified methyl hydroxyethyl cellulose powder. It provides fast consistency development, moderate sag resistance and water demand, and high water retention, influence on cement hydrati...展开 Tylose® MHS 30024 P4 is a water-soluble, non-ionic, highly etherified, modified methyl hydroxyethyl cellulose powder. It provides fast consistency development, moderate sag resistance and water demand, and high water retention, influence on cement hydration, and heat stability. This grade of methyl hydroxyethyl cellulose (MHEC) is particularly well-suited for use in block laying and cement tile adhesive applications. 收起
Tylose® MHS 60000 YP4 SE Tylose GmbH & Co. KG Tylose® MHS 60000 YP4 is a water-soluble, non-ionic, highly etherified methyl hydroxyethyl cellulose powder. It provides fast consistency development, very high water retention, low sag resistance, water demand, and influence on cement hydration, and high...展开 Tylose® MHS 60000 YP4 is a water-soluble, non-ionic, highly etherified methyl hydroxyethyl cellulose powder. It provides fast consistency development, very high water retention, low sag resistance, water demand, and influence on cement hydration, and high heat stability. This grade of methyl hydroxyethyl cellulose (MHEC) is ideal for use in emulsion tile adhesives. 收起
Tylose® MOT 60000 YP4 SE Tylose GmbH & Co. KG Tylose® MOT 60000 YP4 is a water-soluble, non-ionic methyl hydroxypropyl cellulose powder with standard etherification. It displays fast consistency development, very high water retention, low sag resistance, water demand, and influence on cement hydratio...展开 Tylose® MOT 60000 YP4 is a water-soluble, non-ionic methyl hydroxypropyl cellulose powder with standard etherification. It displays fast consistency development, very high water retention, low sag resistance, water demand, and influence on cement hydration, and high heat stability. This grade of methyl hydroxypropyl cellulose (MHPC) is particularly well-suited for use in emulsion joint filler and emulsion tile adhesive applications. 收起
Tylovis® PVA 18 SE Tylose GmbH & Co. KG Tylovis® PVA 18 is used in dry mixed mortars in combination with gypsum or cement as a co-binder. Because of its high adhesive strength to paper, Tylovis® PVA 18 is especially recommended for gypsum based adhesives, jointing and troweling compounds, which...展开 Tylovis® PVA 18 is used in dry mixed mortars in combination with gypsum or cement as a co-binder. Because of its high adhesive strength to paper, Tylovis® PVA 18 is especially recommended for gypsum based adhesives, jointing and troweling compounds, which are used to install plaster board walls and ceilings. Tylovis® PVA 18 reduces the surface tension of water and increases workability and pumpability of mortars. 收起
Tylovis® SE 7 SE Tylose GmbH & Co. KG Tylovis® SE 7 is a starch ether developed especially for dry mixed mortars such as adhesives, plasters and troweling compounds. Tylovis® SE 7 is typically used together with Tylose® MC grades in such building products. It is also compatible with all commo...展开 Tylovis® SE 7 is a starch ether developed especially for dry mixed mortars such as adhesives, plasters and troweling compounds. Tylovis® SE 7 is typically used together with Tylose® MC grades in such building products. It is also compatible with all common dry mixed mortar additives, e.g. air entraining, dispersing and hydrophobic agents. Tylovis® SE 7 gives higher thickening, better slip and sag resistance as well as easy workability. In adhesives and troweling compounds, which contain higher dosages of methyl cellulose, the stickiness and skin formation can be reduced by addition of Tylovis® SE 7. 收起
Vinyl Polymer Resin (VAH) ELT-VAAL Anhui Elite Industrial Co., Ltd Vinyl Polymer Resin (VAH) ELT-VAAL is a white or slight yellow powder which has a high molecular weight. This product has a molecular weight of 25000 and is also crosslinkable with amino resins, polyisocyanates, and other generic resins. This product pr...展开 Vinyl Polymer Resin (VAH) ELT-VAAL is a white or slight yellow powder which has a high molecular weight. This product has a molecular weight of 25000 and is also crosslinkable with amino resins, polyisocyanates, and other generic resins. This product provides blocking resistance, sand-ability, adhesion, and resistance to paint, coatings, adhesives, and inks. 收起
Vinyl Polymer Resin VAM Resin Anhui Elite Industrial Co., Ltd Vinyl Polymer Resin VAM Resin is a white powder with a high molecular weight. This product has a viscosity between 40 and 48 and is also approved for food contact applications by the FDA. Vinyl Polymer Resin VAM Resin provides flexibility and adhesion to...展开 Vinyl Polymer Resin VAM Resin is a white powder with a high molecular weight. This product has a viscosity between 40 and 48 and is also approved for food contact applications by the FDA. Vinyl Polymer Resin VAM Resin provides flexibility and adhesion to paint, coatings, adhesives, and inks. 收起