UL Prospector

成功!

成功保存搜索结果
Calcium Sulfate Whisker Shanghai Tengmin Industry Co., Ltd. Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials.
Dimer Acid Anhui Elite Industrial Co., Ltd Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起
ERISYS™ GE-10 Emerald Performance Materials ERISYS™ GE-10 is an epoxidized ortho cresol, low viscosity, aromatic, mono-epoxide. It is intended for use as a reactive diluent for high viscosity epoxy resins in adhesives. It is compatible at all concentrations with those resins and resin/diluent blend...展开 ERISYS™ GE-10 is an epoxidized ortho cresol, low viscosity, aromatic, mono-epoxide. It is intended for use as a reactive diluent for high viscosity epoxy resins in adhesives. It is compatible at all concentrations with those resins and resin/diluent blends can be cured using any epoxy resins curing agents. It can be used in concrete, masonry and industrial coatings applications where chemical resistance is desired. 收起
Formaldehyde Nanjing Shuguang Chemical Group Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to...展开 Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to fabricate formaldehyde-phenolic resins, urea resins, melamine resins, pentaerythritol, and hexamethylenamine. 收起
Fumed Silica (A-150) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起
Fumed Silica (A-200) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica (A-380) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica 972 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
Fumed Silica 974 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
Good-Rite® 3112 Emerald Performance Materials Good-Rite® 3112 is a clear to pale straw colored liquid partially hindered primary phenolic antioxidant. It provides long-term thermal stability and color preservation in white, mineral-filled adhesive formulations, sealants and caulks.
K-FLEX® 500 Emerald Performance Materials K-FLEX® 500 is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate, used as a plasticizer and coalescent agent. It has applications in hot-melt adhesives, water-based latex adhesives, interior and exterior latex paint, coatings and l...展开 K-FLEX® 500 is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate, used as a plasticizer and coalescent agent. It has applications in hot-melt adhesives, water-based latex adhesives, interior and exterior latex paint, coatings and lacquers. 收起
K-FLEX® 500P Emerald Performance Materials K-FLEX® 500P is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate that is slightly rich in the diethylene glycol dibenzoate component. It was specifically designed for the coatings industry where very low VOC content is required or...展开 K-FLEX® 500P is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate that is slightly rich in the diethylene glycol dibenzoate component. It was specifically designed for the coatings industry where very low VOC content is required or other application areas where low VOC content is critical. It can also be used in adhesives, plastisols and other applications requiring a polar plasticizer with a lower VOC content. 收起
K-FLEX® 850P Emerald Performance Materials K-FLEX® 850P is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate specifically designed as a coalescent for dispersions and a high solvating plasticizer for plastisol/vinyl sealants, polysulphide sealants and silane modified polyme...展开 K-FLEX® 850P is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate specifically designed as a coalescent for dispersions and a high solvating plasticizer for plastisol/vinyl sealants, polysulphide sealants and silane modified polymer sealants. It is also suitable for use in latex adhesives, latex caulks and sealants and architectural and graphic arts coatings. 收起
K-FLEX® 850S Emerald Performance Materials K-FLEX® 850S is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate, optimized for use as a plasticizer in waterborne latex applications such as hot-melt adhesives, latex adhesives, interior and exterior latex paint, caulks and seala...展开 K-FLEX® 850S is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate, optimized for use as a plasticizer in waterborne latex applications such as hot-melt adhesives, latex adhesives, interior and exterior latex paint, caulks and sealants and overprint varnishes. It has full FDA approvals for adhesives and was designed to assist the formulator on issues of VOC reduction. 收起
K-FLEX® 975P Emerald Performance Materials K-FLEX® 975P is a patent-pending blend of diethylene glycol dibenzoate, dipropylene glycol dibenzoate and propylene glycol dibenzoate. It is used as a low VOC plasticizer for water-based latex adhesives , caulks and sealants, putties, screen-printing plas...展开 K-FLEX® 975P is a patent-pending blend of diethylene glycol dibenzoate, dipropylene glycol dibenzoate and propylene glycol dibenzoate. It is used as a low VOC plasticizer for water-based latex adhesives , caulks and sealants, putties, screen-printing plastisol inks, architectural latex coatings as a low VOC coalescent/plasticizer, other coatings including graphic arts applications such as waterborne overprint varnish and waterborne flexographic ink. It can also be used as a low VOC coalescent for paint and coating dispersions. 收起
K-FLEX® DP Emerald Performance Materials K-FLEX® DP is a high solvating plasticizer, comprised of dipropylene glycol dibenzoate. It is compatible with a wide range of polar polymers and can be used in applications such as a low VOC plasticizer in putties, latex adhesives, latex caulks and sealan...展开 K-FLEX® DP is a high solvating plasticizer, comprised of dipropylene glycol dibenzoate. It is compatible with a wide range of polar polymers and can be used in applications such as a low VOC plasticizer in putties, latex adhesives, latex caulks and sealants, coatings and screen-printing plastisol inks. 收起
K-FLEX® PG Emerald Performance Materials K-FLEX® PG is a grade of propylene glycol dibenzoate designed primarily for used as a low VOC plasticizer for silane modified polymer sealants and plastisol printing inks. It is also suitable for use in latex adhesives, latex caulks and sealants and latex...展开 K-FLEX® PG is a grade of propylene glycol dibenzoate designed primarily for used as a low VOC plasticizer for silane modified polymer sealants and plastisol printing inks. It is also suitable for use in latex adhesives, latex caulks and sealants and latex coatings. 收起
KH-540 (SG-Si 1110) Nanjing Shuguang Chemical Group KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be us...展开 KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起
KH-550 (SG-Si 1100) Nanjing Shuguang Chemical Group KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in ...展开 KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起
KH-560 (SG-Si 187) Nanjing Shuguang Chemical Group KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It ...展开 KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It can also improve the cohesive force of acrylic latex, sealants, polyurethanes, and epoxy resins for glass sealants. 收起
KH-570 (SG-Si 174) Nanjing Shuguang Chemical Group KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under ...展开 KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under dry or hygrometric conditions. 收起
Kalama® Benzyl Alcohol NF/FCC Emerald Performance Materials Kalama® Benzyl Alcohol NF/FCC is a low volatility and low toxicity general purpose solvent which functions as a coalescent, solvent and co-solvent for cellulose acetate and nitrocellulose. It can be used in a wide range of curing agent formulations for ep...展开 Kalama® Benzyl Alcohol NF/FCC is a low volatility and low toxicity general purpose solvent which functions as a coalescent, solvent and co-solvent for cellulose acetate and nitrocellulose. It can be used in a wide range of curing agent formulations for epoxy resins, as a co-catalyst and plasticizer and to keep the temperature low during the curing process. It is also used as a solvent or co-solvent in coatings, inks, adhesives, lacquers and photo developer systems. 收起
Kalama® Benzyl Alcohol Technical Grade Emerald Performance Materials Kalama® Benzyl Alcohol Technical Grade is used as a general solvent in the formulation of inks and lacquers where low volatility and low toxicity are desired. It functions as a coalescent, solvent and co-solvent for cellulose acetate and nitrocellulose. I...展开 Kalama® Benzyl Alcohol Technical Grade is used as a general solvent in the formulation of inks and lacquers where low volatility and low toxicity are desired. It functions as a coalescent, solvent and co-solvent for cellulose acetate and nitrocellulose. It can be used in a wide range of curing agent formulations for epoxy resins, as a co-catalyst and plasticizer and to keep the temperature low during the curing process. It is also used as a solvent or co-solvent in coatings, inks, adhesives, lacquers and photo developer systems. 收起
Nychem™1562 Emerald Performance Materials Nychem™1562 is a noncarboxylated butadiene acrylonitrile copolymer latex with a medium nitrile content featuring a combination oil, grease and hydrocarbon resistance, toughness/resilience, and tear and abrasion resistance. This product is primarily used ...展开 Nychem™1562 is a noncarboxylated butadiene acrylonitrile copolymer latex with a medium nitrile content featuring a combination oil, grease and hydrocarbon resistance, toughness/resilience, and tear and abrasion resistance. This product is primarily used as a nitrile emulsion for paper saturation and textile coatings. Nychem™1562 may also be used as a wet laminating resin or heat seal adhesive for rubber and textiles. 收起
Nychem™1562X103 Emerald Performance Materials Nychem™1562X103 is a butadiene acrylonitrile copolymer latex with a medium nitrile content which features a combination of oil, grease and hydrocarbon resistance, toughness/resilience, and tear and abrasion resistance. This product's primary application...展开 Nychem™1562X103 is a butadiene acrylonitrile copolymer latex with a medium nitrile content which features a combination of oil, grease and hydrocarbon resistance, toughness/resilience, and tear and abrasion resistance. This product's primary applications are in adhesives, RFL dips, and metal coatings. Nychem™1562X103 can also be applied as a wet laminating resin or heat seal adhesive to rubber and textiles. 收起
Nychem™1570X79 Emerald Performance Materials Nychem™1570x79 is a carboxylated butadiene acrylonitrile copolymer that is used as a medium nitrile synthetic anionic emulsifier. This product can be applied as a wet laminating resin/hot seal adhesive or can be used to increase abrasion, oil and water r...展开 Nychem™1570x79 is a carboxylated butadiene acrylonitrile copolymer that is used as a medium nitrile synthetic anionic emulsifier. This product can be applied as a wet laminating resin/hot seal adhesive or can be used to increase abrasion, oil and water resistance, and/or wear resistance and flexibility in textile coatings. Nychem™1570x79 can also be used in textile coatings to improve tear strength and puncture resistance and is commonly deployed as a nonwoven binder. 收起
Nychem™1572 Emerald Performance Materials Nychem™1572 is a carboxylated butadiene acrylonitrile copolymer that is used as a nitrile synthetic anionic emulsifier. As an adhesive, this product can be used as a wet laminating resin/heat seal adhesive. Nychem™1572 can be used to improved tear resis...展开 Nychem™1572 is a carboxylated butadiene acrylonitrile copolymer that is used as a nitrile synthetic anionic emulsifier. As an adhesive, this product can be used as a wet laminating resin/heat seal adhesive. Nychem™1572 can be used to improved tear resistance and toughness in paper coatings and can be used in textile coatings to increase abrasion, improve tear resistance, flexibility, and puncture resistance. 收起
Nychem™1577 Emerald Performance Materials Nychem™1577 is a non-carboxylated ABS latex that offers a balance of resistance to both polar and nonpolar solvents. Since this product is non-carboxylated, it has a strong resistance to caustic entities. This product is primarily used in RFL dip adhe...展开 Nychem™1577 is a non-carboxylated ABS latex that offers a balance of resistance to both polar and nonpolar solvents. Since this product is non-carboxylated, it has a strong resistance to caustic entities. This product is primarily used in RFL dip adhesive applications because of its durability and resistance to water and alkili. 收起
Nychem™1578X1 Emerald Performance Materials Nychem™1578X1 is a carboxylated acrylonitrile butadiene styrene latex that can be used as a wet laminating resin or heat seal adhesive on rubber, metal and textiles. This product is a also used to enhance textile coating properties for water resistance, ...展开 Nychem™1578X1 is a carboxylated acrylonitrile butadiene styrene latex that can be used as a wet laminating resin or heat seal adhesive on rubber, metal and textiles. This product is a also used to enhance textile coating properties for water resistance, oil or solvent resistance, abrasion and wear resistance and flexibility. It is often used in conjunction with other compatible water-based polymers. 收起
Nychem™1581 Emerald Performance Materials Nychem™1581 is carboxylated butadiene acrylonitrile polymer latex with a high nitrile content featuring a combination oil, grease and hydrocarbon resistance. This product is used as a wet laminating resin or heat seal adhesive as well as an enhancer for...展开 Nychem™1581 is carboxylated butadiene acrylonitrile polymer latex with a high nitrile content featuring a combination oil, grease and hydrocarbon resistance. This product is used as a wet laminating resin or heat seal adhesive as well as an enhancer for textile coating properties which provides water, oil, solvent, abrasion, and wear resistance. Nychem™1581 is compatible with phenolic resins and resistant to caustic entities. 收起
SG-Si 151 Nanjing Shuguang Chemical Group SG-Si 151, in the form of a colorless to pale yellow clear liquid, is an ethoxylated vinyl silane coupling agent. This product can be used to cross-link adhesives and in special coating materials. It can also crosslink polyethylene and dip treat fibergl...展开 SG-Si 151, in the form of a colorless to pale yellow clear liquid, is an ethoxylated vinyl silane coupling agent. This product can be used to cross-link adhesives and in special coating materials. It can also crosslink polyethylene and dip treat fiberglass or inorganic siliceous fibers. 收起
SG-Ti 502 Nanjing Shuguang Chemical Group SG-Ti 502, in the form of a clear to slightly hazy, colorless to light yellow aqueous liquid, is a titanate coupling agent. This product improves the cross-linking performance for water-borne paints and adhesives. It also makes paint form hard and gloss...展开 SG-Ti 502, in the form of a clear to slightly hazy, colorless to light yellow aqueous liquid, is a titanate coupling agent. This product improves the cross-linking performance for water-borne paints and adhesives. It also makes paint form hard and glossy surfaces on glass, metal, filler, and pigments. 收起
SG-Zr 802 Nanjing Shuguang Chemical Group SG-Zr 802, in the form of a yellowish to brown organic liquid, is a zirconate coupling agent. This product can be used in adhesives and printing inks as a catalyst for cross-linking resins, which improves the binding force and adhesion to the substrate s...展开 SG-Zr 802, in the form of a yellowish to brown organic liquid, is a zirconate coupling agent. This product can be used in adhesives and printing inks as a catalyst for cross-linking resins, which improves the binding force and adhesion to the substrate surface. It can also be used in the electronic industry as a surface treatment for inorganic minerals to improve the dielectric properties of the composites. 收起
Silane Coupling Agent ELT-S 550 Anhui Elite Industrial Co., Ltd Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of ad...展开 Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of adhesives and coatings. 收起
Silane Coupling Agent ELT-S 551 Anhui Elite Industrial Co., Ltd Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in ad...展开 Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in adhesives and coatings. 收起
Silane Coupling Agent ELT-S 602 Anhui Elite Industrial Co., Ltd Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an a...展开 Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an adhesion promoter in adhesives and sealants. 收起
Silane Coupling Agent ELT-S 792 Anhui Elite Industrial Co., Ltd Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 ...展开 Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 acts as an adhesion promoter in PVC-based sealants. 收起
Silicon Dioxide GJ-103 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase th...展开 Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide JLJ-105 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is...展开 Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide NY-102 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bondin...展开 Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide SP-106 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is a...展开 Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide TL-104 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase m...展开 Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide XJ-100 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide XJ-100 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties.
Silicon Dioxide XJ-101 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide XJ-101 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties.
Silicon Dioxide ZZ-108 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide ZZ-108 is a transparent white powder that has high bulkiness and water-solubility properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength, and it is also used in paints and coatings.
Vinyl Polymer Resin (VAH) ELT-VAAL Anhui Elite Industrial Co., Ltd Vinyl Polymer Resin (VAH) ELT-VAAL is a white or slight yellow powder which has a high molecular weight. This product has a molecular weight of 25000 and is also crosslinkable with amino resins, polyisocyanates, and other generic resins. This product pr...展开 Vinyl Polymer Resin (VAH) ELT-VAAL is a white or slight yellow powder which has a high molecular weight. This product has a molecular weight of 25000 and is also crosslinkable with amino resins, polyisocyanates, and other generic resins. This product provides blocking resistance, sand-ability, adhesion, and resistance to paint, coatings, adhesives, and inks. 收起
Vinyl Polymer Resin VAM Resin Anhui Elite Industrial Co., Ltd Vinyl Polymer Resin VAM Resin is a white powder with a high molecular weight. This product has a viscosity between 40 and 48 and is also approved for food contact applications by the FDA. Vinyl Polymer Resin VAM Resin provides flexibility and adhesion to...展开 Vinyl Polymer Resin VAM Resin is a white powder with a high molecular weight. This product has a viscosity between 40 and 48 and is also approved for food contact applications by the FDA. Vinyl Polymer Resin VAM Resin provides flexibility and adhesion to paint, coatings, adhesives, and inks. 收起