| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| Dimer Acid | Anhui Elite Industrial Co., Ltd | Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起 | |
| Formaldehyde | Nanjing Shuguang Chemical Group | Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to...展开 Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to fabricate formaldehyde-phenolic resins, urea resins, melamine resins, pentaerythritol, and hexamethylenamine. 收起 | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起 | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| KH-540 (SG-Si 1110) | Nanjing Shuguang Chemical Group | KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be us...展开 KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起 | |
| KH-550 (SG-Si 1100) | Nanjing Shuguang Chemical Group | KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in ...展开 KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起 | |
| KH-560 (SG-Si 187) | Nanjing Shuguang Chemical Group | KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It ...展开 KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It can also improve the cohesive force of acrylic latex, sealants, polyurethanes, and epoxy resins for glass sealants. 收起 | |
| KH-570 (SG-Si 174) | Nanjing Shuguang Chemical Group | KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under ...展开 KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under dry or hygrometric conditions. 收起 | |
| Lithium Chromate Solution | McGean-Rohco, Inc. | Lithium Chromate Solution is a yellow liquid. It is used as a corrosion inhibitor in various coatings, adhesives, and inks. | |
| MTD100 | Guangxi Zhongchang Resin Co., Ltd. | MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展开 MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD100W | Guangxi Zhongchang Resin Co., Ltd. | MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展开 MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD120 | Guangxi Zhongchang Resin Co., Ltd. | MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展开 MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD120W | Guangxi Zhongchang Resin Co., Ltd. | MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展开 MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD150 | Guangxi Zhongchang Resin Co., Ltd. | MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展开 MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD150W | Guangxi Zhongchang Resin Co., Ltd. | MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展开 MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. 收起 | |
| PVA ASB-516 | McGean-Rohco, Inc. | PVA ASB-516 is compromised of spherical granules that pass 8 mesh screen. They are small glass-like beads of high purity polyvinyl acetate that are clear, colorless, grease-proof and heat seal-able. They can be used in laminating, label and hot melt adhe...展开 PVA ASB-516 is compromised of spherical granules that pass 8 mesh screen. They are small glass-like beads of high purity polyvinyl acetate that are clear, colorless, grease-proof and heat seal-able. They can be used in laminating, label and hot melt adhesives, pigmented and grease-proof paper coatings, overprint varnishes, industrial lacquers and coatings, printing inks, textiles sizes and finishes, and numerous other applications. 收起 | |
| PVA B-100 | McGean-Rohco, Inc. | PVA B-100 is compromised of spherical granules that pass 8 mesh screen. They are small glass-like beads of high purity polyvinyl acetate that are clear, colorless, grease-proof and heat seal-able. They can be used in laminating, label and hot melt adhesiv...展开 PVA B-100 is compromised of spherical granules that pass 8 mesh screen. They are small glass-like beads of high purity polyvinyl acetate that are clear, colorless, grease-proof and heat seal-able. They can be used in laminating, label and hot melt adhesives, pigmented and grease-proof paper coatings, overprint varnishes, industrial lacquers and coatings, printing inks, textiles sizes and finishes, and numerous other applications. 收起 | |
| PVA B-15 | McGean-Rohco, Inc. | PVA B-15 is compromised of spherical granules that pass 8 mesh screen. They are small glass-like beads of high purity polyvinyl acetate that are clear, colorless, grease-proof and heat seal-able. They can be used in laminating, label and hot melt adhesive...展开 PVA B-15 is compromised of spherical granules that pass 8 mesh screen. They are small glass-like beads of high purity polyvinyl acetate that are clear, colorless, grease-proof and heat seal-able. They can be used in laminating, label and hot melt adhesives, pigmented and grease-proof paper coatings, overprint varnishes, industrial lacquers and coatings, printing inks, textiles sizes and finishes, and numerous other applications. 收起 | |
| PVA B-25 | McGean-Rohco, Inc. | PVA B-25 is compromised of spherical granules that pass 8 mesh screen. They are small glass-like beads of high purity polyvinyl acetate that are clear, colorless, grease-proof and heat seal-able. They can be used in laminating, label and hot melt adhesive...展开 PVA B-25 is compromised of spherical granules that pass 8 mesh screen. They are small glass-like beads of high purity polyvinyl acetate that are clear, colorless, grease-proof and heat seal-able. They can be used in laminating, label and hot melt adhesives, pigmented and grease-proof paper coatings, overprint varnishes, industrial lacquers and coatings, printing inks, textiles sizes and finishes, and numerous other applications. 收起 | |
| RA100 | Guangxi Zhongchang Resin Co., Ltd. | RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展开 RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
| RA100W | Guangxi Zhongchang Resin Co., Ltd. | RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展开 RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
| RA120 | Guangxi Zhongchang Resin Co., Ltd. | RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展开 RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
| RA120W | Guangxi Zhongchang Resin Co., Ltd. | RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展开 RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
| RA140 | Guangxi Zhongchang Resin Co., Ltd. | RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展开 RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
| RA140W | Guangxi Zhongchang Resin Co., Ltd. | RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展开 RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
| RA90 | Guangxi Zhongchang Resin Co., Ltd. | RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive...展开 RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
| RA90W | Guangxi Zhongchang Resin Co., Ltd. | RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展开 RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
| RF95 | Guangxi Zhongchang Resin Co., Ltd. | RF95 is a light yellow flaky solid and a glycerol modified pentaerythritol ester. This product is designed for hot-melt adhesives and provides storage stability, hot oxidation resistance and light color in addition to tackification. It dissolves in esters...展开 RF95 is a light yellow flaky solid and a glycerol modified pentaerythritol ester. This product is designed for hot-melt adhesives and provides storage stability, hot oxidation resistance and light color in addition to tackification. It dissolves in esters, azulene ketones and aromatic hydrocarbon. 收起 | |
| RGF100 | Guangxi Zhongchang Resin Co., Ltd. | RGF100 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon so...展开 RGF100 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. 收起 | |
| RGF100W | Guangxi Zhongchang Resin Co., Ltd. | RGF100W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon s...展开 RGF100W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. 收起 | |
| RGF90 | Guangxi Zhongchang Resin Co., Ltd. | RGF90 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solv...展开 RGF90 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. 收起 | |
| RGF90W | Guangxi Zhongchang Resin Co., Ltd. | RGF90W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon sol...展开 RGF90W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. 收起 | |
| RL10 | Guangxi Zhongchang Resin Co., Ltd. | RL10 is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 25 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a pr...展开 RL10 is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 25 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a premium rosin ester is required. It can also be applied to sealants and coatings. 收起 | |
| RL10W | Guangxi Zhongchang Resin Co., Ltd. | RL10W is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 20 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a p...展开 RL10W is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 20 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a premium rosin ester is required. It can also be applied to sealants and coatings. 收起 | |
| Rosin Modified Phenolic Resin - 2112 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It ...展开 Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| Rosin Modified Phenolic Resin - 2116 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble i...展开 Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| Rosin Modified Phenolic Resin - 2118 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble i...展开 Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| Rosin Pentaerythrite Ester - 145 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Pentaerythrite Ester - 145 is the produce of esterification of rosin with pentaerythrite. This product dissolves in ester ,ketone and aromatic hydrocarbon and mixes well with polymers. It is used to increase initial adhesive strength of various kind...展开 Rosin Pentaerythrite Ester - 145 is the produce of esterification of rosin with pentaerythrite. This product dissolves in ester ,ketone and aromatic hydrocarbon and mixes well with polymers. It is used to increase initial adhesive strength of various kinds of adhesive. 收起 | |
| RPF100 | Guangxi Zhongchang Resin Co., Ltd. | RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ...展开 RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100A | Guangxi Zhongchang Resin Co., Ltd. | RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low...展开 RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100B | Guangxi Zhongchang Resin Co., Ltd. | RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low...展开 RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100W | Guangxi Zhongchang Resin Co., Ltd. | RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ...展开 RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF90 | Guangxi Zhongchang Resin Co., Ltd. | RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ca...展开 RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF90W | Guangxi Zhongchang Resin Co., Ltd. | RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ca...展开 RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| SG-Si 151 | Nanjing Shuguang Chemical Group | SG-Si 151, in the form of a colorless to pale yellow clear liquid, is an ethoxylated vinyl silane coupling agent. This product can be used to cross-link adhesives and in special coating materials. It can also crosslink polyethylene and dip treat fibergl...展开 SG-Si 151, in the form of a colorless to pale yellow clear liquid, is an ethoxylated vinyl silane coupling agent. This product can be used to cross-link adhesives and in special coating materials. It can also crosslink polyethylene and dip treat fiberglass or inorganic siliceous fibers. 收起 | |
| SG-Ti 502 | Nanjing Shuguang Chemical Group | SG-Ti 502, in the form of a clear to slightly hazy, colorless to light yellow aqueous liquid, is a titanate coupling agent. This product improves the cross-linking performance for water-borne paints and adhesives. It also makes paint form hard and gloss...展开 SG-Ti 502, in the form of a clear to slightly hazy, colorless to light yellow aqueous liquid, is a titanate coupling agent. This product improves the cross-linking performance for water-borne paints and adhesives. It also makes paint form hard and glossy surfaces on glass, metal, filler, and pigments. 收起 | |
| SG-Zr 802 | Nanjing Shuguang Chemical Group | SG-Zr 802, in the form of a yellowish to brown organic liquid, is a zirconate coupling agent. This product can be used in adhesives and printing inks as a catalyst for cross-linking resins, which improves the binding force and adhesion to the substrate s...展开 SG-Zr 802, in the form of a yellowish to brown organic liquid, is a zirconate coupling agent. This product can be used in adhesives and printing inks as a catalyst for cross-linking resins, which improves the binding force and adhesion to the substrate surface. It can also be used in the electronic industry as a surface treatment for inorganic minerals to improve the dielectric properties of the composites. 收起 | |
| Silane Coupling Agent ELT-S 550 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of ad...展开 Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of adhesives and coatings. 收起 | |
| Silane Coupling Agent ELT-S 551 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in ad...展开 Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in adhesives and coatings. 收起 | |
| Silane Coupling Agent ELT-S 602 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an a...展开 Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an adhesion promoter in adhesives and sealants. 收起 | |
| Silane Coupling Agent ELT-S 792 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 ...展开 Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 acts as an adhesion promoter in PVC-based sealants. 收起 | |
| Silicon Dioxide GJ-103 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase th...展开 Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide JLJ-105 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is...展开 Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide NY-102 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bondin...展开 Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide SP-106 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is a...展开 Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide TL-104 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase m...展开 Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide XJ-100 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide XJ-100 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. | |
| Silicon Dioxide XJ-101 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide XJ-101 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. | |
| Silicon Dioxide ZZ-108 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide ZZ-108 is a transparent white powder that has high bulkiness and water-solubility properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength, and it is also used in paints and coatings. | |
| Vinyl Polymer Resin (VAH) ELT-VAAL | Anhui Elite Industrial Co., Ltd | Vinyl Polymer Resin (VAH) ELT-VAAL is a white or slight yellow powder which has a high molecular weight. This product has a molecular weight of 25000 and is also crosslinkable with amino resins, polyisocyanates, and other generic resins. This product pr...展开 Vinyl Polymer Resin (VAH) ELT-VAAL is a white or slight yellow powder which has a high molecular weight. This product has a molecular weight of 25000 and is also crosslinkable with amino resins, polyisocyanates, and other generic resins. This product provides blocking resistance, sand-ability, adhesion, and resistance to paint, coatings, adhesives, and inks. 收起 | |
| Vinyl Polymer Resin VAM Resin | Anhui Elite Industrial Co., Ltd | Vinyl Polymer Resin VAM Resin is a white powder with a high molecular weight. This product has a viscosity between 40 and 48 and is also approved for food contact applications by the FDA. Vinyl Polymer Resin VAM Resin provides flexibility and adhesion to...展开 Vinyl Polymer Resin VAM Resin is a white powder with a high molecular weight. This product has a viscosity between 40 and 48 and is also approved for food contact applications by the FDA. Vinyl Polymer Resin VAM Resin provides flexibility and adhesion to paint, coatings, adhesives, and inks. 收起 |
