UL Prospector

成功!

成功保存搜索结果
501-E Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc 501-E is an adhesive activator that rapidly and completely cures high-strength adhesives. It is used by pre-applying to metallic, plated, ceramic, or glass substrates including PCBs. 501-E is also used with Dymax industrial 600 series and 800 series struc...展开 501-E is an adhesive activator that rapidly and completely cures high-strength adhesives. It is used by pre-applying to metallic, plated, ceramic, or glass substrates including PCBs. 501-E is also used with Dymax industrial 600 series and 800 series structural adhesives, and 9- series thermal interface adhesives in gaps from less than 1 mil to 20 mils. 收起
535-A Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc 535-A is an adhesive activator that rapidly and completely cures high-strength adhesives. It does this when pre-applied to metal, painted/coated metal, plated and surface treated metal, ferrite, ceramic, glass, wood, and thermoset plastic substrates. 535-...展开 535-A is an adhesive activator that rapidly and completely cures high-strength adhesives. It does this when pre-applied to metal, painted/coated metal, plated and surface treated metal, ferrite, ceramic, glass, wood, and thermoset plastic substrates. 535-A can also be used in Dymax industrial 600 and 800 series structural adhesives. 收起
846-GEL Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc 846-GEL is an activator-curable, structural bonding adhesive that combines strength with environmental compliance. 846-GEL is ideal for applications where dissimilar substrates are to be joined and maximum tensile shear strength is required. 846-GEL cures...展开 846-GEL is an activator-curable, structural bonding adhesive that combines strength with environmental compliance. 846-GEL is ideal for applications where dissimilar substrates are to be joined and maximum tensile shear strength is required. 846-GEL cures upon contact with Dymax solvent-free activators between closely mating surfaces, or upon application of heat. 846-GEL can be used to bond metal surfaces, glass, ceramics, filled nylon, thermoset plastics, and epoxy board. 收起
BDT-1006 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BDT-1006 has very good chemical and thermal resistance (375° C); low shrinkage; rapid cure; low oxygen inhibition; abrasion and scratch resistance.
BDT-1015 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BDT-1015 has low shrinkage and warpage; tin free; rapid cure rate; superior thermal resistance (370 C); excellent stain, scratch, and chemical resistance; low oxygen inhibition.
BDT-4330 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BDT-4330 has excellent chemical and thermal resistance (395° C); low shrinkage; rapid cure; low oxygen inhibition; abrasion and scratch resistance.
BR-116 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-116 provides softness; low color; low shrinkage; oil & chemical resistance; improves adhesion and flexibility; exhibits hydrolytic stability.
BR-144B Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-144B is ideal for 3D printing resins; rapid cure speed; low color/non-yellowing; exhibits hydrolytic stability; provides abrasion & solvent resistance; low MEHQ levels; low skin irritation.
BR-144H15 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-144H15 has rapid cure speed; abrasion and solvent resistant; low color and non-yellowing; exhibits hydrolytic stability.
BR-202 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-202 is aromatic; high bond strength; high elongation; low color; low neat viscosity; exhibits hydrolytic stability; improves adhesion.
BR-204 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-204 is aromatic; high bond strength; high elongation; low color; low neat viscosity; exhibits hydrolytic stability.
BR-302 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-302 is aromatic; excellent chemical resistance; exhibits hydrolytic stability; imparts toughness; improves adhesion; low cost.
BR-3042 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-3042 is aromatic polyether urethane diacrylate; results in soft, highly elongative, tacky systems ideal for use in UV pressure sensitive adhesives (PSA), or UV-curable laminating adhesives; enhances adhesion and improves solvent resistance.
BR-343 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-343 has very low color; flexibility with low viscosity; increases CoF for high slide angle applications; INCI listed for cosmetic use.
BR-344 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-344 is non-yellowing; oil & chemical resistant; exhibits hydrolytic stability.
BR-345 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-345 is ideal for 3D printing resins; color stability; low moisture absorption; low Tg; soft surface hardness; provides impact resistance.
BR-3641AA Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-3641AA has low color and non-yellowing; tenacious adhesion; exhibits hydrolytic stability; enhances resilience; ideal for PSAs.
BR-3641AJ Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-3641AJ has low color and improved optical clarity; tenacious adhesion; non-yellowing; exhibits hydrolytic stability; enhances resilience; ideal for PSAs.
BR-371MS Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-371MS is ideal for hard nail gel coatings; high tensile strength; superior hardness; excellent adhesion to plastic; extremely low color; low heat generation; high Tg.
BR-371S Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-371S has high tensile strength; provides superior hardness & scratch resistance; non-yellowing.
BR-372 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-372 provides a balance of toughness and flexibility with very low color; low skin sensitivity for dental and cosmetic applications.
BR-374 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-374 has very low color; improves adhesion; chemical & oil resistant; non-yellowing; exhibits hydrolytic stability.
BR-3741AJ Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-3741AJ enhances softness and flexibility; improved optical clarity; non-yellowing; improves adhesion; adheres to a wide range of substrates; exhibits hydrolytic stability; oil & chemical resistant; ideal for PSAs.
BR-3747AE Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-3747AE enhances flexibility; provides toughness; non-yellowing; improves adhesion; adheres to a wide range of substrates.
BR-441BI20 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-441BI20 has high tensile strength; weatherable; abrasion resistant; oil and chemical resistant.
BR-541MB Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-541MB has high tensile strength; excellent optical clarity; low skin sensitivity.
BR-541S Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-541S is ideal for nail gel applications; stable color; gloss finish; optically clear; improves adhesion; weatherability.
BR-543 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-543 has abrasion resistance; exhibits hydrolytic stability; high clarity; high tensile strength; increases oil and chemical resistance.
BR-543MB Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-543MB is ideal for nail gel coatings; high tensile strength; excellent optical clarity; oil resistant; improves impact resistance and adhesion; low skin sensitivity; exhibits hydrolytic stability.
BR-551M Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-551M is a more flexible, lower modulus, lower viscosity alternative to BR-541MB; fast soak-off for nail gel applications; low color; low MeHQ content.
BR-551ME Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-551ME has low neat viscosity with good flexibility; ultra-fast soak-off with good durability for nail gel applications; low MeHQ content.
BR-5541M Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-5541M has high elongation; low modulus for soft resin applications; good surface cure; excellent elasticity/rebound; improved tear strength; adhesion to a variety of substrates.
BR-571 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-571 provides toughness; solvent resistance; exceptionally low color; imparts hardness; exhibits hydrolytic stability.
BR-571MB Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-571MB has low yellowing; improves adhesion; provides abrasion resistance; enhances flexibility; weatherability; gloss finish.
BR-5825I30 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-5825I30 is a lower viscosity alternative to BR-582; tough with good impact resistance; good hydrolytic stability and weatherability.
BR-582E8 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-582E8 develops impact resistance; imparts toughness; great tensile strength; enhances flexibility; weatherability; hydrolytic stability; gloss finish.
BR-582H15 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-582H15 develops impact resistance and toughness; great tensile strength; enhances flexibility; hydrolytic stability; weatherability; gloss finish; oil & chemical resistant.
BR-582I10 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-582I10 develops impact resistance; provides a balance of toughness and flexibility; great tensile strength; exhibits hydrolytic stability; weatherability; gloss finish.
BR-640D Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-640D has low temperature flexibility; hydrophobic; low water absorption; excellent dielectric properties; acid/base resistant.
BR-641D Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-641D forms clear, hydrophobic coatings for electronics; acid/base resistance; low temperature flexibility; excellent dielectric properties; gloss finish; outstanding adhesion and exceptional elongation.
BR-641E Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-641E is an improved version of BR-641D; hydrophobic; excellent flexibility & light stability; high temperature and chemical resistance; excellent moisture resistance; extremely low water absorption.
BR-643 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-643 is hydrophobic; improves acid/base resistance; low temperature flexibility; improves adhesion; cures with radiation; excellent dielectric properties; exhibits hydrolytic stability.
BR-741 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-741 is ideal for 3D printing resins; enhances hardness; non-yellowing; adheres to steel, aluminum, and various plastics.
BR-741MD1 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-741MD1 has high Tg, high tensile strength material with moderate elongation; low molecular weight; superior hardness; INCI listed for cosmetic use.
BR-742M Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-742M is ideal for metal, glass, and nail gel coatings; improves adhesion; excellent balance of hardness & flexibility; low skin irritation; non-yellowing.
BR-742MS Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-742MS is an ultra-low MeHQ version of BR-742M with non-detectable (<10 ppm) levels of MeHQ; non-yellowing; excellent adhesion to metals and glass.
BR-742S Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-742S is ideal for nail gel and 3D printing applications; high clarity and gloss; provides high abrasion resistance and impact strength; excellent balance of hardness and flexibility; non-yellowing.
BR-7432GB Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-7432GB imparts toughness; high tensile strength; adheres to polymer films; elastomeric; provides impact & abrasion resistance.
BR-7432GI30 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-7432GI30 imparts toughness; high tensile strength; improves impact resistance; adheres to polymer films; elastomeric.
BR-744BT Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-744BT improves adhesion; provides impact resistance; enhances flexibility; non-yellowing; weather resistant; low MEHQ levels.
BR-744SD Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-744SD is an ideal adhesion promoter or reactive tackifier; promotes adhesion to various metal and plastic substrates; provides excellent flexibility and elasticity; imparts optical clarity.
BR-771F Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-771F has high tensile strength with moderate elongation; low color; excellent adhesion to plastics, particularly polycarbonate.
BR-930D Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-930D is ideal for 3D printing resins; high heat-distortion temperature; provides good toughness and impact resistance; enhances weatherability; low skin irritation.
BR-941 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-941 forms a clear, non-yellowing coating; fast cure response; hydrolytic stability; chemical and scratch resistant; superior hardness.
BR-952 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-952 has UDMA structure; ideal for nail gel applications; low MeHQ; low color; high gloss finish; non-yellowing; Bisphenol A free; provides toughness; low viscosity.
BR-970BT Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-970BT is ideal for 3D printing resins; forms clear films with superior elongation; low viscosity; chemical and stain resistant; hydrolytic stability; low yellowing.
BR-970H Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-970H is ideal for 3D printing resins; high modulus; higher heat- distortion temperature; very low viscosity; low yellowing; chemical and stain resistant; hydrolytic stability.
BR-990 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BR-990 forms a clear film with enhanced elongation, hardness, and strength; exhibits hydrolytic stability; non-yellowing.
BRC-4421 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BRC-4421 has improved balance of flexibility and toughness; excellent hydrophobicity; acid, alkaline, and abrasion resistance; non-yellowing.
BRC-443 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BRC-443 forms clear films with improved adhesion & hardness; non-yellowing; low water absorption; acid, alkaline, & abrasion resistance; gloss finish; high temperature resistance.
BRC-4434SD Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BRC-4434SD is diluted in 25% ethyl acetate; durable hydrophobic oligomer for use in tack-free curing formulations; high gloss; low MeHQ; low color.
BRC-443D Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BRC-443D is ideal for nail gel applications; low MeHQ; gloss finish; non-yellowing; low water absorption; improves adhesion; high temperature resistance; enhances hardness; provides acid & alkaline resistance.
BRC-841 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BRC-841 forms clear films with improved adhesion & hardness; non-yellowing; low surface energy for graphic art application; improved hydrolytic and outdoor stability of coatings; high tensile strength.
BRC-843 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BRC-843 forms clear films with improved adhesion & hard-ness; non-yellowing; low water absorption; alkaline and abrasion resistance; increases weatherability; gloss finish; high temperature resistance.
BRC-843D Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BRC-843D is ideal for nail gel applications; low MeHQ; low water absorption; high temperature, abrasion, and alkaline resistance; non-yellow; gloss finish; hydrophobic.
BRC-843S Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BRC-843S is a softer, more flexible version of BRC-843; excellent temperature and humidity resistance for weathering and aggressive thermal cycling environments; excellent adhesion to glass, metals, and plastics.
BRS-14320S Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc BRS-14320S is ideal for soft-touch coatings; low shrinkage; provides excellent chemical and temperature resistance; exhibits hydrolytic stability; enhances flexibility; improves adhesion.
Bomar® BR-1043MB Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc Bomar® BR-1043MB is a bio-based polyether urethane methacrylate. Provides excellent low temperature flexibility; elasticity/rebound; excellent dynamic properties. Ideal for consumer applications with low irritancy requirements
Bomar® BR-542MB Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc Bomar® BR-542MB provides a desirable balance of toughness and flexibility. Ideal for optically clear coatings; tough 3D printing resins; plastic-bonding adhesives.
Bomar® BR-543TF Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc Bomar® BR-543TF is a difunctional aliphatic polyether urethane acrylate. Films formulated with BR-543TF exhibit superior physical and weathering capabilities. Improves flexibility; improves weathering; improves adhesion.
Calcium Sulfate Whisker Shanghai Tengmin Industry Co., Ltd. Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials.
Dimer Acid Anhui Elite Industrial Co., Ltd Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起
Dual-Cure 3401 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc Dual-Cure 3401 is designed for rapid bonding of a wide variety of plastic and metal substrates and is ideally suited for PC and ABS bonding applications. The product provides superior bond strength and is formulated with a UV/visible light and secondary a...展开 Dual-Cure 3401 is designed for rapid bonding of a wide variety of plastic and metal substrates and is ideally suited for PC and ABS bonding applications. The product provides superior bond strength and is formulated with a UV/visible light and secondary ambient moisture-cure system for curing in shadow areas. Dual-Cure 3401 is also moisture and thermal resistant, has low shrinkage, and fluoresces blue under low-intensity “black light” (365 nm) for easy in-line inspection. Dual-Cure 3401 has applications that include plastic assembly, appliance assembly, and bonding, sealing, or encapsulating PC and ABS components. 收起
Dymax 8-20626 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc Dymax 8-20626 is an epoxy resin adhesive that forms bonds to a variety of materials. Bonds form rapidly between close-fitting substrates upon induction or heat curing. Dymax 8-20626 exhibits thermal shock characteristics and adhesion to a wide variety of ...展开 Dymax 8-20626 is an epoxy resin adhesive that forms bonds to a variety of materials. Bonds form rapidly between close-fitting substrates upon induction or heat curing. Dymax 8-20626 exhibits thermal shock characteristics and adhesion to a wide variety of plated surfaces. It is formulated as a one-part epoxy adhesive, and requires no mixing or activator application. Dymax 8-20626 can be used on metal surfaces, glass, ceramics, thermoset plastics, and filled nylon. 收起
Formaldehyde Nanjing Shuguang Chemical Group Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to...展开 Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to fabricate formaldehyde-phenolic resins, urea resins, melamine resins, pentaerythritol, and hexamethylenamine. 收起
Fumed Silica (A-150) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起
Fumed Silica (A-200) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica (A-380) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica 972 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
Fumed Silica 974 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
Jaylink® 106E Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc Jaylink® 106E has a high degree of acrylamide substitution thus cures very rapidly in response to UV/LED. Films using Jaylink® exhibit excellent abrasion, chemical, and impact resistance. Commonly used in the cosmetic industry.
KH-540 (SG-Si 1110) Nanjing Shuguang Chemical Group KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be us...展开 KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起
KH-550 (SG-Si 1100) Nanjing Shuguang Chemical Group KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in ...展开 KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起
KH-560 (SG-Si 187) Nanjing Shuguang Chemical Group KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It ...展开 KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It can also improve the cohesive force of acrylic latex, sealants, polyurethanes, and epoxy resins for glass sealants. 收起
KH-570 (SG-Si 174) Nanjing Shuguang Chemical Group KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under ...展开 KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under dry or hygrometric conditions. 收起
Light Weld® 425 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc Light Weld® 425 is a structural glass adhesive that cures in seconds upon exposure to UV light to form clear bonds for glass assembly. The "on demand" feature of this glass adhesive allows for parts to be perfectly positioned prior to cure for manual proc...展开 Light Weld® 425 is a structural glass adhesive that cures in seconds upon exposure to UV light to form clear bonds for glass assembly. The "on demand" feature of this glass adhesive allows for parts to be perfectly positioned prior to cure for manual processes. Light Weld® 425's durable bonds are highly resistant to heat and moisture, and are dishwasher safe. This material exhibits exceptional tensile strength. Light Weld® 425 is also used to bond a variety of substrates other than glass such as ceramic, ferrite, and metal surfaces. 收起
Light Weld® 429 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc Light Weld® 429 is an optically clear structural bonding glass adhesive, which cures in seconds upon exposure to UV light for clear, structural adhesive bonds to glass and metals. It is engineered for large area, high-impact applications where a flexible ...展开 Light Weld® 429 is an optically clear structural bonding glass adhesive, which cures in seconds upon exposure to UV light for clear, structural adhesive bonds to glass and metals. It is engineered for large area, high-impact applications where a flexible glass bonding adhesive is required. Light Weld® 429 is recommended for potting, sealing, and bonding. 收起
LumiSet™ LSR-141 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc LumiSet™ LSR-141 is a hybrid nail polish base/color or gel polish base/color coats. Sunlight-curable film forming base/color coat resin with good toughness; excellent adhesion.
LumiSet™ LSR-141N Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc LumiSet™ LSR-141N is a hybrid nail polish base/color or gel polish base/color coats. Tack free film forming base/color coat resin with good toughness compared to traditional cellulose-based film formers; excellent adhesion.
LumiSet™ LSR-241 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc LumiSet™ LSR-241 is a hybrid nail polish top coat. Sunlight-curable film forming base/color coat resin with good toughness; excellent hydrophobicity.
LumiSet™ LSR-241N Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc LumiSet™ LSR-241N is a hybrid nail polish top coat. Tack free film forming top coat resin with good toughness compared to traditional cellulose-based film formers; excellent adhesion.
LumiSet™ LSR-241P Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc LumiSet™ LSR-241P is a hybrid nail polish top coat. Sunlight curable film forming top coat with good toughness; excellent hydrophobicity.
Multi-Cure® 6-621 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc Multi-Cure® 6-621 is an adhesive that is designed for rapid assembling of parts. Multi-Cure 6-621 adhesive is specially formulated to cure with heat in applications where shadowed areas exist. It can be cured with a UV/visible light, heat, or pre-applied ...展开 Multi-Cure® 6-621 is an adhesive that is designed for rapid assembling of parts. Multi-Cure 6-621 adhesive is specially formulated to cure with heat in applications where shadowed areas exist. It can be cured with a UV/visible light, heat, or pre-applied activator. Multi-Cure® 6-621 can be used with products made of metal, glass, ceramic, phenolic, filled polyamide, and other substrate materials. 收起
Pacer Technology® MR-290 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc Pacer Technology® MR-290 is a moisture-resistant cyanoacrylate instant adhesive that is specially formulated to resist moisture and humidity while retaining tensile shear strength, impact strength, and heat resistance. This product is well suited for bond...展开 Pacer Technology® MR-290 is a moisture-resistant cyanoacrylate instant adhesive that is specially formulated to resist moisture and humidity while retaining tensile shear strength, impact strength, and heat resistance. This product is well suited for bonding rubber, magnets, speaker cones, electronics, and plastics. 收起
Pacer Technology® MR-3000 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc Pacer Technology® MR-3000 is a moisture-resistant cyanoacrylate instant adhesive that is specially formulated to resist moisture and humidity while retaining tensile shear strength, impact strength, and heat resistance. This product is well suited for bon...展开 Pacer Technology® MR-3000 is a moisture-resistant cyanoacrylate instant adhesive that is specially formulated to resist moisture and humidity while retaining tensile shear strength, impact strength, and heat resistance. This product is well suited for bonding rubber, magnets, speaker cones, electronics, and plastics. 收起
Pacer Technology® RX GEL Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc Pacer Technology® RX GEL is an extended instant cyanoacrylate adhesive that is fast-curing and non-surface sensitive. This product is particularly well suited for use on porous, acidic, contaminated, or hard-to-bond surfaces, such as certain plastics and ...展开 Pacer Technology® RX GEL is an extended instant cyanoacrylate adhesive that is fast-curing and non-surface sensitive. This product is particularly well suited for use on porous, acidic, contaminated, or hard-to-bond surfaces, such as certain plastics and plated applications. 收起
Pacer Technology® RX-100 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc Pacer Technology® RX-100 is an extended instant cyanoacrylate adhesive that is fast-curing and non-surface sensitive. This product is particularly well suited for use on porous, acidic, contaminated, or hard-to-bond surfaces, such as certain plastics and ...展开 Pacer Technology® RX-100 is an extended instant cyanoacrylate adhesive that is fast-curing and non-surface sensitive. This product is particularly well suited for use on porous, acidic, contaminated, or hard-to-bond surfaces, such as certain plastics and plated applications. 收起
Pacer Technology® RX-5 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc Pacer Technology® RX-5 is an extended instant cyanoacrylate adhesive that is fast-curing and non-surface sensitive. This product is particularly well suited for use on porous, acidic, contaminated, or hard-to-bond surfaces, such as certain plastics and pl...展开 Pacer Technology® RX-5 is an extended instant cyanoacrylate adhesive that is fast-curing and non-surface sensitive. This product is particularly well suited for use on porous, acidic, contaminated, or hard-to-bond surfaces, such as certain plastics and plated applications. 收起
Pacer Technology® RX-50 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc Pacer Technology® RX-50 is an extended instant cyanoacrylate adhesive that is fast-curing and non-surface sensitive. This product is particularly well suited for use on porous, acidic, contaminated, or hard-to-bond surfaces, such as certain plastics and p...展开 Pacer Technology® RX-50 is an extended instant cyanoacrylate adhesive that is fast-curing and non-surface sensitive. This product is particularly well suited for use on porous, acidic, contaminated, or hard-to-bond surfaces, such as certain plastics and plated applications. 收起
Pacer Technology® RX-500 Dymax Oligomers & Coatings, formerly Bomar Specialties, Inc Pacer Technology® RX-500 is an extended instant cyanoacrylate adhesive that is fast-curing and non-surface sensitive. This product is particularly well suited for use on porous, acidic, contaminated, or hard-to-bond surfaces, such as certain plastics and ...展开 Pacer Technology® RX-500 is an extended instant cyanoacrylate adhesive that is fast-curing and non-surface sensitive. This product is particularly well suited for use on porous, acidic, contaminated, or hard-to-bond surfaces, such as certain plastics and plated applications. 收起