UL Prospector

成功!

成功保存搜索结果
BARECO™ C-4040 Baker Hughes (Baker Petrolite - Coatings) BARECO™ C-4040 is a hard synthetic wax comprised of linear, fully saturated ethylene homopolymers. In application, BARECO C-4040 polymer exhibits low melt viscosity, heat stability and resistance to chemical attack. BARECO™ C-4040 has a melting point of 1...展开 BARECO™ C-4040 is a hard synthetic wax comprised of linear, fully saturated ethylene homopolymers. In application, BARECO C-4040 polymer exhibits low melt viscosity, heat stability and resistance to chemical attack. BARECO™ C-4040 has a melting point of 104 and a viscosity of 54. BARECO™ C-4040 is intended for use as a hold melt adhesive. 收起
Calcium Sulfate Whisker Shanghai Tengmin Industry Co., Ltd. Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials.
Fumed Silica (A-150) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起
Fumed Silica (A-200) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica (A-380) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica 972 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
Fumed Silica 974 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
LithoFill 100 LITHOS Industrial Minerals GmbH LithoFill 100 is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, an...展开 LithoFill 100 is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. 收起
LithoFill BM LITHOS Industrial Minerals GmbH LithoFill BM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, ant...展开 LithoFill BM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. 收起
LithoFill MM LITHOS Industrial Minerals GmbH LithoFill MM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, ant...展开 LithoFill MM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. 收起
PETROLITE™ EP-1100 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ EP-1100 is a copolymer of propylene and ethylene. The addition of propylene results in short chain branching, which reduces the polymer’s crystallinity. PETROLITE™ EP-1100 has a melting point of 110 and a viscosity of 15 at 149°C. This copolyme...展开 PETROLITE™ EP-1100 is a copolymer of propylene and ethylene. The addition of propylene results in short chain branching, which reduces the polymer’s crystallinity. PETROLITE™ EP-1100 has a melting point of 110 and a viscosity of 15 at 149°C. This copolymer has a narrow molecular weight distribution and the branching provides a more flexible and softer polymer with solvent solubility. The targeted end uses of this copolymer is to promote anti-block, release aid, and slip aid in thermoplastic elastomers and for hot melt adhesives applications. 收起
PETROLITE™ EP-700 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ EP-700 is a copolymer of propylene and ethylene. The addition of propylene results in short chain branching, which reduces the polymer’s crystallinity. PETROLITE™ EP-700 has a melting point of 96 and a viscosity of 12 at 99°C. This copolymer ha...展开 PETROLITE™ EP-700 is a copolymer of propylene and ethylene. The addition of propylene results in short chain branching, which reduces the polymer’s crystallinity. PETROLITE™ EP-700 has a melting point of 96 and a viscosity of 12 at 99°C. This copolymer has a narrow molecular weight distribution and the branching provides a more flexible and softer polymer with solvent solubility. The targeted end uses of this copolymer is to promote anti-block, release aid, and slip aid in thermoplastic elastomers and for hot melt adhesives applications. 收起
POLYWAX™ 1000 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 1000 has a melting point of 113 and a viscosity of 15. It exhibits a sharp melting point, fast recrystalliz...展开 POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 1000 has a melting point of 113 and a viscosity of 15. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 2000 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 2000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 2000 has a melting point of 126 and a viscosity of 55. It exhibits a sharp melting point, fast recrystalliz...展开 POLYWAX™ 2000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 2000 has a melting point of 126 and a viscosity of 55. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 3000 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 3000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 3000 has a melting point of 129 and a viscosity of 130. It exhibits a sharp melting point, fast recrystalli...展开 POLYWAX™ 3000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 3000 has a melting point of 129 and a viscosity of 130. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 400 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 400 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 400 has a melting point of 81 and a viscosity of 7. It exhibits a sharp melting point, fast recrystallizatio...展开 POLYWAX™ 400 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 400 has a melting point of 81 and a viscosity of 7. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 500 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 500 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 500 has a melting point of 88 and a viscosity of 8.5. It exhibits a sharp melting point, fast recrystallizat...展开 POLYWAX™ 500 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 500 has a melting point of 88 and a viscosity of 8.5. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 600 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 600 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 600 has a melting point of 94 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallizati...展开 POLYWAX™ 600 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 600 has a melting point of 94 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 655 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 655 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 655 has a melting point of 99 and a viscosity of 7. It exhibits a sharp melting point, fast recrystallizatio...展开 POLYWAX™ 655 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 655 has a melting point of 99 and a viscosity of 7. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 725 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 725 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 725 has a melting point of 104 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallizat...展开 POLYWAX™ 725 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 725 has a melting point of 104 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 850 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 850 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 850 has a melting point of 107 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallizat...展开 POLYWAX™ 850 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 850 has a melting point of 107 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
Silicon Dioxide GJ-103 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase th...展开 Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide JLJ-105 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is...展开 Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide NY-102 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bondin...展开 Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide SP-106 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is a...展开 Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide TL-104 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase m...展开 Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide XJ-100 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide XJ-100 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties.
Silicon Dioxide XJ-101 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide XJ-101 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties.
Silicon Dioxide ZZ-108 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide ZZ-108 is a transparent white powder that has high bulkiness and water-solubility properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength, and it is also used in paints and coatings.