UL Prospector

成功!

成功保存搜索结果
CAPCURE® 3-800 Gabriel Performance Products CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in ...展开 CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. 收起
CAPCURE® 3830-81 Gabriel Performance Products CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine an...展开 CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. 收起
CAPCURE® 3830-CB Gabriel Performance Products CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves ...展开 CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves bonds between glass and metal, especially brass and bronze. This material is ideal for two-component mixing equipment in assembly line use when mixed at a 1:1 epoxy/hardener ratio. CAPCURE® 3830-CB can be used as a catalyst or co-curing material where it will impart properties typical of mercaptans and provide improved adhesion. 收起
CAPCURE® 3850-101 Gabriel Performance Products CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine ...展开 CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. 收起
Calcium Sulfate Whisker Shanghai Tengmin Industry Co., Ltd. Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials.
Fumed Silica (A-150) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起
Fumed Silica (A-200) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica (A-380) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica 972 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
Fumed Silica 974 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
GABEPRO® GPM-800 Gabriel Performance Products GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and i...展开 GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. 收起
GABEPRO® GPM-8003 Gabriel Performance Products GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and ...展开 GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. 收起
GABEPRO® GPM-800LO Gabriel Performance Products GABEPRO® GPM-800LO is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and...展开 GABEPRO® GPM-800LO is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. GPM-800LO is formulated to have an improved odor relative to our standard product. 收起
GABEPRO® GPM-888 Gabriel Performance Products GABEPRO® GPM-888 is formulated from a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low te...展开 GABEPRO® GPM-888 is formulated from a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. This material is formulated to cure epoxy resin in approximately 5 minutes. 收起
GABEPRO® GPM-891 Gabriel Performance Products GABEPRO® GPM-891 is an easy to use epoxy curing agent with reduced odor and provides a non-yellowing casting color. The amine additive in GPM-891 is formaldehyde-free and is less sensitive to the addition of a chelator that can be used help reduce skinnin...展开 GABEPRO® GPM-891 is an easy to use epoxy curing agent with reduced odor and provides a non-yellowing casting color. The amine additive in GPM-891 is formaldehyde-free and is less sensitive to the addition of a chelator that can be used help reduce skinning problems. GABEPRO® GPM-891 is designed to provide a gel time of 5 minutes when formulated with a standard bis-phenol A epoxy resin. 收起
LithoFill 100 LITHOS Industrial Minerals GmbH LithoFill 100 is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, an...展开 LithoFill 100 is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. 收起
LithoFill BM LITHOS Industrial Minerals GmbH LithoFill BM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, ant...展开 LithoFill BM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. 收起
LithoFill MM LITHOS Industrial Minerals GmbH LithoFill MM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, ant...展开 LithoFill MM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. 收起
Phenoxy PK™FE Gabriel Performance Products Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resin...展开 Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™FE may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™FE is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. 收起
Phenoxy PK™HA Gabriel Performance Products Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins...展开 Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HA may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HA is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. 收起
Phenoxy PK™HB Gabriel Performance Products Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins...展开 Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HB may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HB is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. 收起
Phenoxy PK™HH Gabriel Performance Products Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resin...展开 Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HH may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HH is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. 收起
Phenoxy PK™HM-301 Gabriel Performance Products Phenoxy PK™HM-301 is a solid-grade phenoxy PKHC resin melt blended with an oligomeric polyester polyol containing primary hydroxyl functional groups. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent...展开 Phenoxy PK™HM-301 is a solid-grade phenoxy PKHC resin melt blended with an oligomeric polyester polyol containing primary hydroxyl functional groups. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). PK™HM-301 provides for improved reactivity due to the presence of primary hydroxyls and the lower glass transition temperature of the alloy. PK™HM-301 has a glass transition temperature of about 35 °C which imparts improved solids/viscosity ratios in common solvents like MEK. Coatings of PK™HM-301 exhibit high levels of flexibility and formability when appropriately cured. 收起
Phenoxy PK™HP-80 Gabriel Performance Products Phenoxy PK™HP-80 is a micronized powder–grade Phenoxy resin with a particle size of approximately 70 microns. Phenoxy resins (poly hydroxyl ethers) are tough, ductile, amorphous polymers having excellent thermal stability, adhesion and cohesion strength, ...展开 Phenoxy PK™HP-80 is a micronized powder–grade Phenoxy resin with a particle size of approximately 70 microns. Phenoxy resins (poly hydroxyl ethers) are tough, ductile, amorphous polymers having excellent thermal stability, adhesion and cohesion strength, and excellent vapor barrier properties. Phenoxy resins also react with cross-linkers like isocyanates, phenolic and melamine resins along the backbone hydroxyl groups. PK™HP-80 provides for ease of incorporation into liquid resins due to its high surface area; recommended levels of PKHP-80 incorporated into epoxy resins are 5 to 25% depending on the desired mix viscosity. 收起
Silicon Dioxide GJ-103 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase th...展开 Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide JLJ-105 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is...展开 Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide NY-102 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bondin...展开 Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide SP-106 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is a...展开 Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide TL-104 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase m...展开 Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide XJ-100 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide XJ-100 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties.
Silicon Dioxide XJ-101 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide XJ-101 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties.
Silicon Dioxide ZZ-108 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide ZZ-108 is a transparent white powder that has high bulkiness and water-solubility properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength, and it is also used in paints and coatings.
Versamid® 100 Gabriel Performance Products Versamid® 100 is a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 and epoxy resin systems provide long pot lives and fast tack-free formulatio...展开 Versamid® 100 is a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 and epoxy resin systems provide long pot lives and fast tack-free formulations. Formulations based on this resin system cure less quickly than Versamid® 115 systems and exhibit somewhat lower chemical and solvent resistance than Versamid® 125 coating systems. Versamid® 100 and epoxy resin systems are recommended for applications such as: Maintenance coating applications, primers, and enamel paint formulations. 收起
Versamid® 100 I-70 Gabriel Performance Products Versamid® 100 I-70 is an iso-propanol solution of a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 I-70 and epoxy resin systems provide long ...展开 Versamid® 100 I-70 is an iso-propanol solution of a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 I-70 and epoxy resin systems provide long pot lives and fast tack-free formulations. Formulations based on this resin system cure less quickly than Versamid® 115 systems and exhibit somewhat lower chemical and solvent resistance than Versamid® 125 coating systems. 收起
Versamid® 100 T-60 Gabriel Performance Products Versamid® 100 T-60 is a toluene solution of a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 T-60 and epoxy resin systems provide long pot liv...展开 Versamid® 100 T-60 is a toluene solution of a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 T-60 and epoxy resin systems provide long pot lives and fast tack-free formulations. Formulations based on this resin system cure less quickly than Versamid® 115 systems and exhibit somewhat lower chemical and solvent resistance than Versamid® 125 coating systems. 收起
Versamid® 115 Gabriel Performance Products Versamid® 115 is a high viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins for flexible and resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications. Ver...展开 Versamid® 115 is a high viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins for flexible and resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications. Versamid® 115 and epoxy resin systems provide excellent resistance properties, adhesion and superior corrosion resistance. They are more solvent and chemical resistant than Versamid® 100 systems and generally dry faster than Versamid® 125 systems. Versamid® 115 and epoxy resin systems are recommended for applications such as: Maintenance coating applications, Primers, and Enamel paint formulations. 收起
Versamid® 125 Gabriel Performance Products Versamid® 125 is a medium viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins for tough, chemical-resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications...展开 Versamid® 125 is a medium viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins for tough, chemical-resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications. Versamid® 125 and epoxy resin systems are generally harder than and cure more rapidly than Versamid® 140 systems. It is often blended with Versamid® G 250 US, a fatty amido amine resin, to provide a range of viscosities, cure speeds and resistance properties. 收起
Versamid® 140 Gabriel Performance Products Versamid® 140 is a medium to low viscosity, reactive polyamide resin solution designed for use with solid or liquid epoxy resins to provide tough, chemical-resistant thermoset coating applications that cure at room temperature. This resin is also useful i...展开 Versamid® 140 is a medium to low viscosity, reactive polyamide resin solution designed for use with solid or liquid epoxy resins to provide tough, chemical-resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications. Versamid® 140 and epoxy resin coating systems are more chemical and solvent resistant than Versamid® 115 systems and generally lower in viscosity than Versamid® 125 systems. It offers a unique combination of hardness and flexibility along with the highest chemical and solvent resistance of the dimer-based polyamide resin series. 收起
Versamid® 228 Gabriel Performance Products Versamid® 228 is a modified polyamide/epoxy adduct designed for reactions with low viscosity liquid epoxy resins. Versamid® 228 and epoxy resin systems are recommended for applications such as industrial maintenance coating applications, primers, and enam...展开 Versamid® 228 is a modified polyamide/epoxy adduct designed for reactions with low viscosity liquid epoxy resins. Versamid® 228 and epoxy resin systems are recommended for applications such as industrial maintenance coating applications, primers, and enamel paint formulations. 收起
Versamid® C-30 Gabriel Performance Products Versamid® C-30 is a low viscosity, light colored, amine curing agent that is moisture insensitive at room temperature. It has been designed specifically for use in high solids coatings, self-leveling flooring and castings where excellent chemical resistan...展开 Versamid® C-30 is a low viscosity, light colored, amine curing agent that is moisture insensitive at room temperature. It has been designed specifically for use in high solids coatings, self-leveling flooring and castings where excellent chemical resistance, good color retention and excellent flow and blush resistance are required. 收起
Versamid® EH-30 Gabriel Performance Products Versamid® EH-30 is a tertiary amine accelerator and curing agent for epoxy resin systems. The anionic catalyst is a Lewis base that contains unshared electrons to facilitate opening the oxirane ring. Versamid® EH-30, a Mannich base, shows marked accelerat...展开 Versamid® EH-30 is a tertiary amine accelerator and curing agent for epoxy resin systems. The anionic catalyst is a Lewis base that contains unshared electrons to facilitate opening the oxirane ring. Versamid® EH-30, a Mannich base, shows marked acceleration because of the presence of the phenolic hydroxyl. 收起
Versamid® G-151 Gabriel Performance Products Versamid® G-151 is an amidoamine resin of low viscosity suitable for catalyzing both liquid and solid epoxy. It offers the same advantages as other types of amino-amides, however, Versamid® G-151 has a lower sensitivity to humidity.
Versamid® G-490 Gabriel Performance Products Versamid® G-490 is a liquid amidoamine resin designed for reaction with liquid or solid epoxy resins. It can be used as all or part of the curing agent component in high solids, adhesive, sealant, electrical potting, coating and flooring applications.