| Acrylated Amine Oligomer SZ 225 | Soltech Ltd | Acrylated Amine Oligomer SZ 225 is an acrylate functional oligomeric amine resin designed to provide low viscosity, pigment wetting, adhesion, and high gloss. Common applications of this product include plastic coatings, plastic adhesives, screen ink vehi...展开 Acrylated Amine Oligomer SZ 225 is an acrylate functional oligomeric amine resin designed to provide low viscosity, pigment wetting, adhesion, and high gloss. Common applications of this product include plastic coatings, plastic adhesives, screen ink vehicles, clear paper coatings, wood coatings, and wood fillers. Acrylated Amine Oligomer SZ 225 is 100% polymer solid by weight with a viscosity of 500-1,100 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 500 | Soltech Ltd | Aliphatic Urethane Acrylate SU 500 is a aliphatic urethane diacrylate containing isobornyl acrylate that is designed to provide adhesion, a light color, flexibility, and toughness. Common applications of this product include screen inks, plastic coatings,...展开 Aliphatic Urethane Acrylate SU 500 is a aliphatic urethane diacrylate containing isobornyl acrylate that is designed to provide adhesion, a light color, flexibility, and toughness. Common applications of this product include screen inks, plastic coatings, overprint varnishes, adhesives, and wood flooring. Aliphatic Urethane Acrylate SU 500 is 78% polymer solid by weight with a mPa.s viscosity of 1,200-2,000 at 60℃. 收起 | |
| Aliphatic Urethane Acrylate SU 519 | Soltech Ltd | Aliphatic Urethane Acrylate SU 519 is an acrylated aliphatic urethane oligomer diluted with 30% of hydroxy propyl methacrylate that is designed to provide flexibility and heat resistance, Common applications of this product include marking inks, plastic a...展开 Aliphatic Urethane Acrylate SU 519 is an acrylated aliphatic urethane oligomer diluted with 30% of hydroxy propyl methacrylate that is designed to provide flexibility and heat resistance, Common applications of this product include marking inks, plastic adhesives, thick film casting, plastic coatings, clear coatings, and overprint varnishes. Aliphatic Urethane Acrylate SU 519 is 70% polymer solid by weight with an mPa.s viscosity of 12,000-18,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 530 | Soltech Ltd | Aliphatic Urethane Acrylate SU 530 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment...展开 Aliphatic Urethane Acrylate SU 530 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment coatings, and lithographic inks. Aliphatic Urethane Acrylate SU 530 is 100% polymer solid by weight with a mPs.s viscosity of 35,000-55,000 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 5347 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5347 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, gl...展开 Aliphatic Urethane Acrylate SU 5347 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment coatings, and lithographic inks. Aliphatic Urethane Acrylate SU 5347 is 100% polymer solid by weight with a mPs.s viscosity of 600-1,200 at 25℃. 收起 | |
| Aliphatic Urethane Acrylate SU 580 | Soltech Ltd | Aliphatic Urethane Acrylate SU 580 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, low odor, and light color. This product is commonly used in applications such as pigment coatings for wood, ...展开 Aliphatic Urethane Acrylate SU 580 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, low odor, and light color. This product is commonly used in applications such as pigment coatings for wood, adhesives for glass, metal coatings, plastic coatings, and screen ink binders. Aliphatic Urethane Acrylate SU 580 is 100% polymer solid by weight with an mPa.s viscosity of 13,000-19,000 at 60℃. 收起 | |
| BLUESIL PRIM 10073 | Elkem Silicones | BLUESIL PRIM 10073 is a product intended to improve the adhesion of BLUESIL one-component and two-component elastomers to metals and certain painted surfaces. The product is available as a ready-to-use solution of reactants diluted in a solvent. | |
| BLUESIL PRIM 12076 | Elkem Silicones | BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactan...展开 BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactants diluted in a solvent. 收起 | |
| BLUESIL RES 8152P | Elkem Silicones | BLUESIL RES 8152P is a 50% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 8170P | Elkem Silicones | BLUESIL RES 8170P is used to manufacture rigid insulators in the high pressure process: laminates based on glass fabric, mica (mica paper), mica/glass composite fabric and asbestos. It offers outstanding mechanical properties. | |
| BLUESIL RES 8360M | Elkem Silicones | BLUESIL RES 8360M is a methyl silicone resin supplied as a solution in toluene and intended for the manufacture of flexible insulants. | |
| BLUESIL SLT 10B OFF WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10B PVC WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10T OFF WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| BLUESIL SLT 10T PVC WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| BLUESIL SLT 3B BLACK | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3B TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3B WHITE | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3E BLACK | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E WHITE | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3S TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 3S WHITE | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 4S TRANSCLUCENT | Elkem Silicones | BLUESIL SLT 4S is a one-component, moisture-cure silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, low modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT AQUARIUM BLACK | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起 | |
| BLUESIL SLT AQUARIUM TRANSLUCENT | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起 | |
| BLUESIL SLT NOVART S TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to...展开 BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to give a flexible seal of low modulus. 收起 | |
| BLUESIL SLT NOVART TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起 | |
| BLUESIL SLT NOVART WHITE | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起 | |
| BLUESIL SLT VEC 90 BLACK | Elkem Silicones | BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, fle...展开 BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, flexible seal. 收起 | |
| BLUESIL SLT VEC 99A BLACK | Elkem Silicones | BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and ...展开 BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and adhesion properties. Its advantage, relative to conventional two-component elastomers lies in the large tolerance relative to the accuracy of the ratio A/B. BLUESIL SLT VEC 99 has been specially designed to meet requirements in Structural Glazing applications. 收起 | |
| BLUESIL SLT VI 10 BLACK | Elkem Silicones | BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with h...展开 BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with high mechanical performance levels. 收起 | |
| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| CRYSTAZENE 110 | DRT | CRYSTAZENE 110是一种水白色、高度稳定、经萜烯改性的增粘树脂。它显示了出色的粘合性。这款产品推荐用于茂金属聚乙烯为基础的热熔合成橡胶粘合剂，丙烯酸为基础的粘合剂以及塑料薄膜改性剂。 | |
| DERCOLYTE A 115 | DRT | 一种增粘树脂，尤其推荐用于提高热熔胶粘剂或溶剂型胶粘剂的附着性能。它通过α-蒎烯聚合生成。 | |
| DERCOLYTE A 125 | DRT | DERCOLYTE A 125 is a tackifying resin recommended to improve the adhesive properties of hot melt formulations or solvent adhesives. It is produced from the polymerization of alpha pinene. | |
| DERCOLYTE LTG | DRT | DERCOLYTE LTG通过萜烃聚合制备，具有低软化点和低VOC含量。推荐用于增塑作用和改善压敏胶粘剂的附着力 | |
| DERCOLYTE S 115 | DRT | 一种增粘树脂，推荐用于提高溶剂型胶粘剂配方，尤其是PSA的附着结性能。它通过β-蒎烯聚合生成 | |
| DERCOLYTE S 125 | DRT | DERCOLYTE S 125 is a tackifying resin recommended to improve the adhesive properties of solvent based adhesive formulations, particularly in PSA. It is produced from the polymerization of beta pinene. | |
| DERCOLYTE TS 105 | DRT | DERCOLYTE TS 105 is a very light colored tackifying resin showing excellent adhesive performances with block copolymers, especially in hot melt, pressure sensitive adhesives formulations. It is produced from the copolymerisation of terpene and styrene. | |
| DERCOLYTE TS 95 | DRT | DERCOLYTE TS 95是由萜烯和苯乙烯的聚合物生产出来的。它是一种浅色粘性树脂，具有极佳附着力的嵌段共聚物。 | |
| DERMULSENE 222 | DRT | 基于萜烯和稳定松香酯的水性无溶剂树脂。设计用于增粘一系列丙烯酸，SBR和其他水性合成或天然聚合物 | |
| DERMULSENE DEG | DRT | 是一种水性、不含溶剂的树脂，基于二乙烯乙二醇树脂 | |
| DERMULSENE HBR 509 | DRT | DERMULSENE HBR 509是一种水性、不含溶剂的树脂，53%固体份，基于松香脂/碳氢树脂的混合物 | |
| DERMULSENE HBR 70 | DRT | 基于松香/碳氢化合物混合树脂的水性无溶剂树脂。专门设计用于增粘一系列丙烯酸，SBR和其他水性合成或天然聚合物 | |
| DERMULSENE RA 702 | DRT | DERMULSENE RA 702 is an aqueous, solvent free resin based on stabilized rosin. It is recommended for contact adhesives, building and industrial adhesives. | |
| DERMULSENE RE 802 | DRT | 基于稳定松香酯的水性无溶剂树脂。专门设计用于增粘一系列丙烯酸，SBR和其他水性合成或天然聚合物 | |
| DERMULSENE TR 602 | DRT | 基于萜烯酚树脂的水性树脂乳液。专门设计用于增粘一系列丙烯酸，SBR和其他水性合成或天然聚合物 | |
| DERTOLINE G2L | DRT | 甘油酯化的妥尔油树脂。它是一种增粘树脂，尤其推荐用于基于EVA或嵌段共聚物的热熔胶粘剂中 | |
| DERTOLINE P2L | DRT | 季戊四醇酯化的妥尔油树脂。它是一种增粘树脂，主要推荐用于基于EVA共聚物的热熔胶粘剂中 | |
| DERTOLINE PLS | DRT | 高稳定的季戊四醇酯化妥尔油松香。它是一种增粘树脂，主要用于基于EVA或嵌段共聚物的热熔胶 | |
| DERTOPHENE H 150 | DRT | DERTOPHENE H 150 is a terpene phenolic resin showing a high polarity. It is suitable for use in solvent based and hot melt based adhesives. | |
| DERTOPHENE T | DRT | 萜烯酚树脂，与各种弹性体，树脂和蜡均相容。可以提高热熔型或溶剂型胶粘剂的性能 | |
| DERTOPHENE T 105 | DRT | 萜烯酚树脂，与各种弹性体，树脂和蜡均相容。可以提高热熔型或溶剂型胶粘剂的性能 | |
| DERTOPHENE T 115 | DRT | 萜烯酚树脂，与各种弹性体相容。适用于热熔型或溶剂型胶粘剂 | |
| Epoxy Acrylate SE 120 | Soltech Ltd | Epoxy Acrylate SE 120 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, lamina...展开 Epoxy Acrylate SE 120 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, laminating adhesives, wood sealers, screen inks, lithographic inks, and fast cure coatings. Epoxy Acrylate SE 120 is 100% polymer solid by weight with a viscosity of 2,000-4,000 at 60℃. 收起 | |
| Epoxy Acrylate SE 140 | Soltech Ltd | Epoxy Acrylate SE 140 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, lamina...展开 Epoxy Acrylate SE 140 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, laminating adhesives, wood sealers, screen inks, and low odor coatings. Epoxy Acrylate SE 140 is 70% polymer solid by weight with a viscosity of 20,000-30,000 at 25℃. 收起 | |
| Epoxy Acrylate SE 145 | Soltech Ltd | Epoxy Acrylate SE 145 is a modified diacrylate ester of bisphenol A expoxy resin designed to provide surface hardness, solvent resistance, water resistance, low color, and improved pigment wetting. This product is commonly used in applications such as pap...展开 Epoxy Acrylate SE 145 is a modified diacrylate ester of bisphenol A expoxy resin designed to provide surface hardness, solvent resistance, water resistance, low color, and improved pigment wetting. This product is commonly used in applications such as paper coatings, wood coatings, wood sealers, and laminating adhesives. Epoxy Acrylate SE 145 is 75% polymer solid by weight with a viscosity of 15,000-35,000 at 25℃. 收起 | |
| Epoxy Acrylate SE 146 | Soltech Ltd | Epoxy Acrylate SE 146 is a difunctional epoxy acrylate oligomer with 25% TPGDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, light color, and a fast curing response. This product is commonly used in applicat...展开 Epoxy Acrylate SE 146 is a difunctional epoxy acrylate oligomer with 25% TPGDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, light color, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 146 is 75% polymer solid by weight with a viscosity of 8,000-14,000 at 25℃. 收起 | |
| Epoxy Acrylate SE 147 | Soltech Ltd | Epoxy Acrylate SE 147 is an difunctional epoxy acrylate oligomer with 20% HDDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as ...展开 Epoxy Acrylate SE 147 is an difunctional epoxy acrylate oligomer with 20% HDDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 147 is 80% polymer solid by weight with a viscosity of 6,500-10,500 at 25℃. 收起 | |
| Epoxy Acrylate SE 148 | Soltech Ltd | Epoxy Acrylate SE 148 is an difunctional epoxy acrylate oligomer with 20% TMPTA that is designed to provide solvent resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings...展开 Epoxy Acrylate SE 148 is an difunctional epoxy acrylate oligomer with 20% TMPTA that is designed to provide solvent resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 148 is 80% polymer solid by weight with a viscosity of 6,500-10,500 at 25℃. 收起 | |
| Epoxy Acrylate SE 1700 | Soltech Ltd | Epoxy Acrylate SE 1700 is a hdiacrylate ester of bisphenol A epoxy acrylate oligomer designed to provide water resistance, chemical resistance, surface hardness, high gloss, and a fast curing response. This product is commonly used in applications such as...展开 Epoxy Acrylate SE 1700 is a hdiacrylate ester of bisphenol A epoxy acrylate oligomer designed to provide water resistance, chemical resistance, surface hardness, high gloss, and a fast curing response. This product is commonly used in applications such as wood sealers, overprint varnishes, laminating adhesives, screen inks, and lithographic inks. Epoxy Acrylate SE 1700 is 100% polymer solid by weight with a viscosity of 2,000-5,000 at 25℃. 收起 | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起 | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| GRANOLITE G | DRT | 这是一种浅色的，与丙三醇酯化而成的除臭松香 | |
| GRANOLITE G 105 | DRT | 由松香与甘油酯化而成，GRANOLITE G 105是一种浅色的除臭树脂，适用于多种胶黏剂中。 | |
| GRANOLITE P | DRT | 是一种浅色除臭味的树脂，适用于各种胶粘剂和路标热熔融配方 | |
| GRANOLITE P 118 | DRT | 是一种松香的季戊四醇酯，具有高软化点，主要推荐用于热熔融配方 | |
| GRANOLITE SG | DRT | 是一种稳定的松香甘油酯，可除臭 | |
| GRANOLITE TEG | DRT | 改性三聚乙二醇松香酯，用于胶粘剂，主要用于地板覆盖物用胶粘剂配方 | |
| Griltex® 11A | EMS-CHEMIE AG (PRIMID) | Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a...展开 Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 1A | EMS-CHEMIE AG (PRIMID) | Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...展开 Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 2A | EMS-CHEMIE AG (PRIMID) | Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...展开 Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 2A S | EMS-CHEMIE AG (PRIMID) | Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination ...展开 Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 6E | EMS-CHEMIE AG (PRIMID) | Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 8E | EMS-CHEMIE AG (PRIMID) | Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 9E | EMS-CHEMIE AG (PRIMID) | Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is well used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CE 20 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...展开 Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CE 21 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 21 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...展开 Griltex® CE 21 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 160-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CE 22 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 22 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...展开 Griltex® CE 22 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CT 100 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 100 is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle ...展开 Griltex® CT 100 is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CT 101 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 210-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CT 102 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 102 is a polyphenylamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various parti...展开 Griltex® CT 102 is a polyphenylamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1260A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1260A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It h...展开 Griltex® D 1260A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has good steam and dry cleaning resistance. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1299A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1299A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, non-wovens, apparel materials and non-textile substrates. It is available in granule form in various pa...展开 Griltex® D 1299A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, non-wovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1309E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1309E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1309E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1377E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1377E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1377E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a lamination temperature of 170-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1442E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1442E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1442E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 190-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1500A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1500A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1500A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 150-170°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1519E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1519E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1519E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1523A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1523A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1523A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 210-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1539E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1539E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1539E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 140-170°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1541A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1541A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1541A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1549A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1549A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...展开 Griltex® D 1549A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 180-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1556A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1556A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1556A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1566A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1566A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...展开 Griltex® D 1566A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1582E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1582E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1582E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 120-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 |
