| 205 | U.S. Zinc | 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is a...展开 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is available in a pelleted form (205P) and with surface treatment (205S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| 205H | U.S. Zinc | 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate...展开 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate purity and greater reactivity are required. Grade 205H is available in a pelleted form (205HS) and with surface treatment (205HS). 205H has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| 205HSA | U.S. Zinc | 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applica...展开 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applications where great reactivity is required. 205HSA is obtainable with surface treatment (205HSA-S). It has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (pounds/ft3). 收起 | |
| 205L | U.S. Zinc | 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger...展开 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger than average particles. Grade 205L is available in a pelleted form (205LP) and with surface treatment (205LS). 205L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| 205XL | U.S. Zinc | 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles....展开 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles. It has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. 收起 | |
| 210 | U.S. Zinc | 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake li...展开 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake lining, and agriculture industries and in applications where General purpose zinc oxide could be used. 210 is available in a pelleted form (210P) and with surface treatment (210S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| 210E | U.S. Zinc | 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industrie...展开 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industries. 210E is available in pelleted form (210E-P) and with surface treatment (210ES). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| 210H | U.S. Zinc | 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is availab...展开 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is available in a pelleted form (210HP) and with surface treatment (210HS). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| 210HSA | U.S. Zinc | 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries an...展开 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries and in applications where high reactivity is required. 210HSA is available with surface treatment (210HSA-S). It has a surface area range of 8 to 10 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40. 收起 | |
| 210L | U.S. Zinc | 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with ...展开 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with surface treatment (210LS). It has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| AZO66 | U.S. Zinc | AZO66 is an exceptionally pure French Process, in powder form, statistically measured zinc oxide formed from zinc metal. AZO66 provides greater color and is vastly efficient in white or light colored goods. This grade is used in the zinc chemical, paint/c...展开 AZO66 is an exceptionally pure French Process, in powder form, statistically measured zinc oxide formed from zinc metal. AZO66 provides greater color and is vastly efficient in white or light colored goods. This grade is used in the zinc chemical, paint/coating, ceramic, oil additive industries and in those applications where great purity is dire. Grade AZO66 is available in a pelleted form (AZO66P), in a treated pelleted form (AZO66PT), and with surface treatment (AZO66T). AZO66 has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| AZO66L | U.S. Zinc | AZO66L is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemical, paint, and coating industries and in those applications which stem from greater than norma...展开 AZO66L is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemical, paint, and coating industries and in those applications which stem from greater than normal high purity particles. Grade AZO66L is available in a pelleted form (AZO66LP) and with the surface treatment (AZO66LT). AZO66L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| AZO66XL | U.S. Zinc | AZO66XL is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the electronic, ceramic, paint, and coating industries and in those applications which stem from greater tha...展开 AZO66XL is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the electronic, ceramic, paint, and coating industries and in those applications which stem from greater than normal high purity particles. AZO66XL has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. 收起 | |
| AZO77H | U.S. Zinc | AZO77H is an exceptionally pure powder, small particle size French Process, statistically measured zinc oxide formed from zinc metal. It is used for the manufacture of various chemicals, in the plastic, paint, latex, and coating industries and in those ap...展开 AZO77H is an exceptionally pure powder, small particle size French Process, statistically measured zinc oxide formed from zinc metal. It is used for the manufacture of various chemicals, in the plastic, paint, latex, and coating industries and in those applications where high purity and reactivity is required. Grade AZO77H is available with surface treatment (AZO77HT). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (lbs. /cu. Ft.). 收起 | |
| AZO77HSA | U.S. Zinc | AZO77HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. AZO77HSA was explicitly developed to have the highest viscosity, reactivity, purity, and fineness. This grade is used...展开 AZO77HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. AZO77HSA was explicitly developed to have the highest viscosity, reactivity, purity, and fineness. This grade is used in can sealants, latex compounds, zinc chemicals, plastics, paint/coating, and in the food can liner coating industry where the particularly fine particles freely convert certain accessible soluble into white sulfide, thus avoiding discoloration of food from sulfides of tin or iron. AZO77HSA is available with surface treatment (AZO77HSA-T), has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (lbs. /cu. Ft.). 收起 | |
| Bisomer® Amine D700 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 多功能氨基醇助剂 | |
| Bisomer® BDDMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer BDDMA是一种低粘度低气味二甲基丙烯酸酯单体 | |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | BISOMER®BZMA（甲基丙烯酸苄基酯）是一种低粘度单官能单体，广泛适用于多种应用。Bisomer BZMA粘度低，疏水性差，它特别适合作为胶黏剂，密封剂，墨水和涂料的活性稀释剂。 | |
| Bisomer® C13MA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer C13MA是一种憎水性单官能团甲基丙烯酸酯单体，具有低玻璃化转变温度（Tg），是一种出色的柔韧和增塑单体 | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® CHMA是疏水性甲基丙烯酸酯单体。它是一种单官能甲基丙烯酸酯，这使其成为合成丙烯酸类聚合物的理想选择。Bisomer® CHMA可用于提高丙烯酸树脂的疏水性，耐候性，耐物理和化学性。这款产品在2K粘合剂和涂料中也是有效的活性稀释剂。 | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展开 Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起 | |
| Bisomer® DALP | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer DALP是一种稳定的高纯度脂类，可以在中等温度下进行聚合以产生热固性或热塑性树脂。这种珍贵的属性对胶黏剂，涂料，铸件和灌封化合物等产品的生产十分重要。 | |
| Bisomer® DEGDMA HI | GEO Specialty Chemicals, Inc. TRIMET Products Group | 它是一种低粘度脂肪族二甲基丙烯酸酯齐聚物，可理想地作为共聚单体用于提高各种塑胶、胶粘剂、密封剂和不饱和聚酯和丙烯酸聚合物，例如丙烯酸切片和丙烯酸地坪的硬度和机械性能 | |
| Bisomer® EP 100 DMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | 特殊设计的嵌段聚烷撑乙二醇的二甲基丙烯酸酯 | |
| Bisomer® EP 150 DMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | 特殊设计的嵌段聚烷撑乙二醇的二甲基丙烯酸酯，可更改配方体系的憎水/亲水平衡 | |
| Bisomer® HEMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer HEMA广泛用于制备丙烯酸多醇汽车原厂和修补漆，以及工业涂料，它无毒不黄变 | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...展开 Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. 收起 | |
| Bisomer® HPMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | 特殊聚合物单体 | |
| Bisomer® IDMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | 甲基丙烯酸异癸酯，一种疏水的单官能团甲基丙烯酸酯，具有低玻璃化转变温度是优异的柔韧性和增塑性单体。 | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | 憎水性单官能团甲基丙烯酸酯单体，具有低玻璃化转变温度（Tg），具有出色的柔韧性和增塑性 | |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® LMA 97SP 是一款疏水，低玻璃态转化温度(Tg)的单功能丙烯酸甲酯单体。作为聚合型塑化剂使用时，展现出很好的可塑性。使用Bisomer® LMA 97SP的配方可以减少不同批次产品在粘度、颜料润湿性、抗化学品性、附着力、硬度、剪切强度、粘性等性能上的差异性。 该产品是合成应用于工业涂料、印刷油墨、压敏胶等领域的高质量丙烯酸树脂的核心原料。 | |
| Bisomer® MPEG 350 MA | GEO Specialty Chemicals, Inc. TRIMET Products Group | 长链甲基丙烯酸酯单酯，基于乙烯氧化物主链 | |
| Bisomer® MPEG 550 MA | GEO Specialty Chemicals, Inc. TRIMET Products Group | 长链甲基丙烯酸酯单酯，基于乙烯氧化物主链 | |
| Bisomer® PEG 200 DMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | 低粘度脂肪族二甲基丙烯酸酯单体，非常适合作为共同单体用于改进机械性能和耐化学品性能 | |
| Bisomer® PEM6 LD | GEO Specialty Chemicals, Inc. TRIMET Products Group | 基于乙烯氧化物，Bisomer PEM6 LD溶于水，含伯羟基。它无毒，属于欧洲现有商业化学品目录（EINECS）“聚合物”分类。很适合用于水凝胶、木器浸润剂、土壤稳定剂和聚氨酯分散体（PUDs）。它也广泛应用于更传统的丙烯酸多醇和氨基甲酸酯丙烯酸酯齐聚物，用于光学成像应用例如印刷电路板（PCBs）和干膜抗蚀剂（DFRs） | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 为制备UV固化氨基甲酸酯丙烯酸酯齐聚物提供了一种非常规的途径。它是用于基于氨基甲酸酯丙烯酸酯和乙烯基酯（环氧乙烯基酯）UV体系的出色的低收缩反应性稀释剂 | |
| Bisomer® PPM5 LI | GEO Specialty Chemicals, Inc. TRIMET Products Group | 用于氨基甲酸酯甲基丙烯酸酯齐聚物的一种稳固的封端剂，用于制备光聚合物印刷板和干膜抗蚀剂 | |
| Bisomer® PTE | GEO Specialty Chemicals, Inc. TRIMET Products Group | 广泛用于活化MMA基丙烯酸树脂，苯乙烯基不饱和聚酯和乙烯酯甲基丙烯酸酯配方 | |
| Bisomer® TEGDMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | 低粘度脂肪族二甲基丙烯酸酯单体，非常适合作为共同单体用于改进塑胶、聚烯烃、胶粘剂和密封剂的硬度和机械性能。它尤其适合用于改进不饱和聚酯和丙烯酸聚合物，例如丙烯酸切片和丙烯酸地坪的机械性能 | |
| BLUESIL PRIM 10073 | Elkem Silicones | BLUESIL PRIM 10073 is a product intended to improve the adhesion of BLUESIL one-component and two-component elastomers to metals and certain painted surfaces. The product is available as a ready-to-use solution of reactants diluted in a solvent. | |
| BLUESIL PRIM 12076 | Elkem Silicones | BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactan...展开 BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactants diluted in a solvent. 收起 | |
| BLUESIL RES 8152P | Elkem Silicones | BLUESIL RES 8152P is a 50% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 8170P | Elkem Silicones | BLUESIL RES 8170P is used to manufacture rigid insulators in the high pressure process: laminates based on glass fabric, mica (mica paper), mica/glass composite fabric and asbestos. It offers outstanding mechanical properties. | |
| BLUESIL RES 8360M | Elkem Silicones | BLUESIL RES 8360M is a methyl silicone resin supplied as a solution in toluene and intended for the manufacture of flexible insulants. | |
| BLUESIL SLT 10B OFF WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10B PVC WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10T OFF WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| BLUESIL SLT 10T PVC WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| BLUESIL SLT 3B BLACK | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3B TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3B WHITE | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3E BLACK | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E WHITE | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3S TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 3S WHITE | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 4S TRANSCLUCENT | Elkem Silicones | BLUESIL SLT 4S is a one-component, moisture-cure silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, low modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT AQUARIUM BLACK | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起 | |
| BLUESIL SLT AQUARIUM TRANSLUCENT | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起 | |
| BLUESIL SLT NOVART S TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to...展开 BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to give a flexible seal of low modulus. 收起 | |
| BLUESIL SLT NOVART TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起 | |
| BLUESIL SLT NOVART WHITE | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起 | |
| BLUESIL SLT VEC 90 BLACK | Elkem Silicones | BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, fle...展开 BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, flexible seal. 收起 | |
| BLUESIL SLT VEC 99A BLACK | Elkem Silicones | BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and ...展开 BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and adhesion properties. Its advantage, relative to conventional two-component elastomers lies in the large tolerance relative to the accuracy of the ratio A/B. BLUESIL SLT VEC 99 has been specially designed to meet requirements in Structural Glazing applications. 收起 | |
| BLUESIL SLT VI 10 BLACK | Elkem Silicones | BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with h...展开 BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with high mechanical performance levels. 收起 | |
| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc. TRIMET Products Group | 产品技术指导 - 一种独特和多用途的位阻二醇分子，具羟基和羧基官能性。 | |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 是一种DMPA CHDA BDO己二酸聚酯树脂，98%不挥发组分。它可作为水性体系的酸官能团来源和作为共树脂改进颜料的润湿、分散和稳定。 | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc. TRIMET Products Group | DMPA® Polyol HA-0135LV2是一种同时带酸和羟基官能团的低结晶聚酯多醇。类似DMPA® Polyol HA-0135，该树脂可消除在聚氨酯乳液生产过程中NMP作为加工溶剂的需球 | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起 | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Griltex® 11A | EMS-CHEMIE AG (PRIMID) | Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a...展开 Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 1A | EMS-CHEMIE AG (PRIMID) | Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...展开 Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 2A | EMS-CHEMIE AG (PRIMID) | Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...展开 Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 2A S | EMS-CHEMIE AG (PRIMID) | Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination ...展开 Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 6E | EMS-CHEMIE AG (PRIMID) | Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 8E | EMS-CHEMIE AG (PRIMID) | Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 9E | EMS-CHEMIE AG (PRIMID) | Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is well used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CE 20 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...展开 Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CE 21 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 21 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...展开 Griltex® CE 21 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 160-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CE 22 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 22 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...展开 Griltex® CE 22 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CT 100 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 100 is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle ...展开 Griltex® CT 100 is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CT 101 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 210-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CT 102 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 102 is a polyphenylamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various parti...展开 Griltex® CT 102 is a polyphenylamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1260A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1260A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It h...展开 Griltex® D 1260A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has good steam and dry cleaning resistance. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1299A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1299A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, non-wovens, apparel materials and non-textile substrates. It is available in granule form in various pa...展开 Griltex® D 1299A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, non-wovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1309E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1309E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1309E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1377E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1377E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1377E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a lamination temperature of 170-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1442E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1442E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1442E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 190-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1500A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1500A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1500A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 150-170°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1519E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1519E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1519E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1523A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1523A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1523A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 210-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1539E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1539E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1539E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 140-170°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1541A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1541A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1541A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1549A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1549A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...展开 Griltex® D 1549A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 180-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1556A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1556A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1556A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1566A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1566A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...展开 Griltex® D 1566A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 |
