| Amorphous Silica Microspheres & Nanospheres | Cospheric LLC | Silica microspheres are inherently hydrophillic and negatively charged. These particles provide higher opacity than glass microspheres and are often used as contrast particles. Aqueous suspensions of silica microspheres rarely require the use of surfactan...展开 Silica microspheres are inherently hydrophillic and negatively charged. These particles provide higher opacity than glass microspheres and are often used as contrast particles. Aqueous suspensions of silica microspheres rarely require the use of surfactants or stabilizers. Silane coatings enable silica microspheres to be modified to generate functional groups or alter surface properties. Additional advantage of silica microspheres is glass transition temperature of over 1000 degrees Celsius, which makes them suitable for high temperature applications. Silica microspheres and nanospheres are composed of synthetic amorphous silica made in a laboratory batch environment. 收起 | |
| Barium Titanate Glass Spheres & Microspheres | Cospheric LLC | Barium titanate glass is a unique optical glass formulation based on a large percentage of Barium Oxide (BaO) and Titanium Oxide (TiO2), as opposed to other traditional glass formulas which are mostly Silica (SiO2). Barium titanate glass offers a much hig...展开 Barium titanate glass is a unique optical glass formulation based on a large percentage of Barium Oxide (BaO) and Titanium Oxide (TiO2), as opposed to other traditional glass formulas which are mostly Silica (SiO2). Barium titanate glass offers a much higher refractive index compared to other glass formulations. Refractive Index is the ratio of the speed of light in a vacuum to the speed of light in the specified material - a description of how light slows down as it passes through an optical material. High refractive index microspheres are critical when used for optical systems where high refractive power is required such as endoscopy, micro-optics, defense and microscopy. Barium titanate glass microspheres will reflect back more light directly to the viewer. High index of refraction enables retroreflectivity which is often desired in guard rails, traffic signs, reflective paint, tape or clothing. Barium titanate glass hemispherically coated with aluminum ensures that the light bounces off the aluminum- coated half of the sphere and produces the retroreflective effect for high visibility in dark conditions. 收起 | |
| BLUESIL PRIM 10073 | Elkem Silicones | BLUESIL PRIM 10073 is a product intended to improve the adhesion of BLUESIL one-component and two-component elastomers to metals and certain painted surfaces. The product is available as a ready-to-use solution of reactants diluted in a solvent. | |
| BLUESIL PRIM 12076 | Elkem Silicones | BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactan...展开 BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactants diluted in a solvent. 收起 | |
| BLUESIL RES 8152P | Elkem Silicones | BLUESIL RES 8152P is a 50% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 8170P | Elkem Silicones | BLUESIL RES 8170P is used to manufacture rigid insulators in the high pressure process: laminates based on glass fabric, mica (mica paper), mica/glass composite fabric and asbestos. It offers outstanding mechanical properties. | |
| BLUESIL RES 8360M | Elkem Silicones | BLUESIL RES 8360M is a methyl silicone resin supplied as a solution in toluene and intended for the manufacture of flexible insulants. | |
| BLUESIL SLT 10B OFF WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10B PVC WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10T OFF WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| BLUESIL SLT 10T PVC WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| BLUESIL SLT 3B BLACK | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3B TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3B WHITE | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3E BLACK | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E WHITE | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3S TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 3S WHITE | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 4S TRANSCLUCENT | Elkem Silicones | BLUESIL SLT 4S is a one-component, moisture-cure silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, low modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT AQUARIUM BLACK | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起 | |
| BLUESIL SLT AQUARIUM TRANSLUCENT | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起 | |
| BLUESIL SLT NOVART S TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to...展开 BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to give a flexible seal of low modulus. 收起 | |
| BLUESIL SLT NOVART TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起 | |
| BLUESIL SLT NOVART WHITE | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起 | |
| BLUESIL SLT VEC 90 BLACK | Elkem Silicones | BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, fle...展开 BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, flexible seal. 收起 | |
| BLUESIL SLT VEC 99A BLACK | Elkem Silicones | BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and ...展开 BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and adhesion properties. Its advantage, relative to conventional two-component elastomers lies in the large tolerance relative to the accuracy of the ratio A/B. BLUESIL SLT VEC 99 has been specially designed to meet requirements in Structural Glazing applications. 收起 | |
| BLUESIL SLT VI 10 BLACK | Elkem Silicones | BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with h...展开 BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with high mechanical performance levels. 收起 | |
| Borosilicate Glass Spheres & Microspheres | Cospheric LLC | Borosilicate Glass is well-known for its durability, low coefficient of expansion, low density, high softening point, high resistance to acids and thermal shock, compared to other glass formulations. The chemical composition consists primarily of silicon ...展开 Borosilicate Glass is well-known for its durability, low coefficient of expansion, low density, high softening point, high resistance to acids and thermal shock, compared to other glass formulations. The chemical composition consists primarily of silicon oxide (SiO2) and boron oxide (B2O3). Solid Glass Microspheres, also called glass beads, provide multiple benefits including enhanced processing, excellent chemical and heat resistance, thermal stability, low oil absorption, and are often used in automotive, electrical, household appliance, adhesives, packaging, paint and construction industries. Glass is non-toxic, extremely stable and recyclable. Cospheric specializes in solid glass microspheres with perfect sphericity, tight tolerances and particle size distributions for biomedical, life sciences, microscopy, automotive, high-tech equipment and specialty applications. 收起 | |
| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| Density Marker Beads | Cospheric LLC | Density marker beads are small colored microspheres of known mass density that are used for calibrating density gradients and determining density in gradient columns. Density gradients are often used for separations and purification of cells, viruses and ...展开 Density marker beads are small colored microspheres of known mass density that are used for calibrating density gradients and determining density in gradient columns. Density gradients are often used for separations and purification of cells, viruses and sub-cellular particles. Generally a set of several density marker beads covering a range of densities is used. The gradient is calibrated with beads that float at different heights within the column. When a test sample is added to the column, it drops until the point of neutral buoyancy, and the density is determined from the calibration chart. Density gradient columns can be used to measure the density of any sample. 收起 | |
| Fluorescent & Phoshorescent Microspheres | Cospheric LLC | Polyethylene microspheres of high sphericity and narrowly graded particle size distribution are used in industrial and scientific applications for process control, diagnostics, and medical device technology. It is often advantageous to color code the part...展开 Polyethylene microspheres of high sphericity and narrowly graded particle size distribution are used in industrial and scientific applications for process control, diagnostics, and medical device technology. It is often advantageous to color code the particles by size to better understand which part of the process the spheres of the specific size were able to pass through, or where the contamination in the process is coming from. Polyethylene is inert to most solvents. Polyethylene microspheres are hydrophobic and need to be coated with surfactant prior to suspending in water or aqueous media. 收起 | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起 | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Hollow Glass Microspheres | Cospheric LLC | Hollow Glass Microspheres, also called bubbles, microbubbles, or microballoons, are typically made out of borosilicate- sodalime glass blend formulation and provide the benefits of low density, high heat and chemical resistance. The walls of glass microsp...展开 Hollow Glass Microspheres, also called bubbles, microbubbles, or microballoons, are typically made out of borosilicate- sodalime glass blend formulation and provide the benefits of low density, high heat and chemical resistance. The walls of glass microspheres are rigid and typically have the thickness of 10% of the diameter of the sphere. The crush strength of the hollow spheres is determined by the thickness of the walls and, as expected, the higher the sphere density the higher the crush strength. The lightweight hollow glass spheres are chemically stable, noncombustible, nonporous, and have excellent water resistance. 收起 | |
| KOMERATE A0010 | Green Chemical Co., Ltd. | KOMERATE A0010 is an aliphatic monofunctional acrylate monomer. It is characterized by good adhesion, low shrinkage, and low viscosity. | |
| KOMERATE A0010M | Green Chemical Co., Ltd. | KOMERATE A0010M is an aliphatic monofunctional monomer. It is characterized by low viscosity, low odor, and excellent solvency. | |
| KOMERATE A0016 | Green Chemical Co., Ltd. | KOMERATE A0016 is an aliphatic monofunctional monomer. It is characterized by low viscosity, low odor, and good compatibility. | |
| KOMERATE A0016M | Green Chemical Co., Ltd. | KOMERATE A0016M is a monofunctional monomer. It is characterized by good adhesion and high Tg. | |
| KOMERATE A0017 | Green Chemical Co., Ltd. | KOMERATE A0017 is an aliphatic, monofunctional tertiobutyl cyclohexanol acrylate. Fast reactivity, low viscosity and improved adhesion to plastics, metals, and other difficult substrates. | |
| KOMERATE A0017M | Green Chemical Co., Ltd. | KOMERATE A0017M is an aliphatic, monofunctional tertiobutyl cyclohexanol methacrylate. Low viscosity and improved adhesion to plastics, metals, and other difficult substrates. | |
| KOMERATE A002 | Green Chemical Co., Ltd. | KOMERATE A002 is a monofunctional monomer. It is characterized by good solvency and good adhesion on metal and plastics. | |
| KOMERATE A003 | Green Chemical Co., Ltd. | KOMERATE A003 is a monofunctional monomer. It has high refractive index and low volatility. | |
| KOMERATE A003M | Green Chemical Co., Ltd. | KOMERATE A003M is a monofunctional monomer. It is used to make polymers of high refractive index. | |
| KOMERATE A005 | Green Chemical Co., Ltd. | KOMERATE A005 is tetrahydrofurfuryl acrylate. It is a low viscosity polar mono-functional monomer that offers good adhesion properties. | |
| KOMERATE A005M | Green Chemical Co., Ltd. | KOMERATE A005M is a monofunctional monomer. It is characterized by excellent adhesion and good chemical resistance. | |
| KOMERATE A007 | Green Chemical Co., Ltd. | KOMERATE A007 is ethoxy ethoxy ethyl acrylate. It is a low viscosity monomer that offers good adhesion, flexibility, and low shrinkage properties. | |
| KOMERATE A008 | Green Chemical Co., Ltd. | KOMERATE A008 is a monofunctional monomer. It is characterized by high refractive index and good adhesion. | |
| KOMERATE A011 | Green Chemical Co., Ltd. | KOMERATE A011 is an ethoxylated o-phenylphenol acrylate monomer. It has high refractive index, low shrinkage, and good adhesion product. | |
| KOMERATE A014 | Green Chemical Co., Ltd. | KOMERATE A014 is phenol (EO) acrylate. It is a low volatility mono-functional, aromatic monomer that offers good adhesion properties. | |
| KOMERATE A014M | Green Chemical Co., Ltd. | KOMERATE A014M is a monofunctional methacrylate monomer. It is a low volatility mono-functional, aromatic monomer that offers good adhesion properties. | |
| KOMERATE A015 | Green Chemical Co., Ltd. | KOMERATE A015 is tetrahydrofurfuryl acrylate. It is a low viscosity and low toxicity polar mono-functional monomer that offers good adhesion properties. | |
| KOMERATE A015M | Green Chemical Co., Ltd. | KOMERATE A015M is mono-functional methacrylate. It is a low viscosity and low toxicity polar mono-functional monomer that offers good adhesion properties. | |
| KOMERATE A015P | Green Chemical Co., Ltd. | KOMERATE A015P is a monofunctional monomer. It is characterized by low skin irritation, and good adhesion. | |
| KOMERATE A021 | Green Chemical Co., Ltd. | KOMERATE A021 is a low volatility mono-functional monomer which can be polymerized in the presence of free radicals. Exhibits high refractive index. | |
| KOMERATE A024 | Green Chemical Co., Ltd. | KOMERATE A024 is phenol (EO)2 acrylate. It is a low volatility mono-functional, aromatic monomer that is good viscosity reducer. | |
| KOMERATE A026 | Green Chemical Co., Ltd. | KOMERATE A026 is a monofunctional monomer. It is characterized by low odor, low shrinkage, and low skin irritation. | |
| KOMERATE A030 | Green Chemical Co., Ltd. | KOMERATE A030 is mono-functional monomer. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A030M | Green Chemical Co., Ltd. | KOMERATE A030M is mono-functional monomer. It features water solubility, excellent wetting, and low Tg. It is recommended as a versatile intermediate for coatings and polymer modification. | |
| KOMERATE A031 | Green Chemical Co., Ltd. | KOMERATE A031 is a low volatility mono-functional monomer which can be polymerized in the presence of free radicals. Exhibits high refractive index. | |
| KOMERATE A040 | Green Chemical Co., Ltd. | KOMERATE A040 is a methoxy PEG400 acrylate monomer. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A040M | Green Chemical Co., Ltd. | KOMERATE A040M is a monofunctional methaacrylate. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A040TT | Green Chemical Co., Ltd. | KOMERATE A040TT is a methoxy PEG400 acrylate. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A044 | Green Chemical Co., Ltd. | KOMERATE A044 is mono-functional acrylate monomer. Offers low volatility, low shrinkage and good adhesion. | |
| KOMERATE A046 | Green Chemical Co., Ltd. | KOMERATE A046 is a monofunctional monomer. It is characterized by low skin irritation, good adhesion, and flexibility. | |
| KOMERATE A050 | Green Chemical Co., Ltd. | KOMERATE A050 is a methoxy PEG500 acrylate. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A050M | Green Chemical Co., Ltd. | KOMERATE A050M is a monofunctional monomer. It is characterized by good water solubility, low shrinkage, and excellent wetting. | |
| KOMERATE A060 | Green Chemical Co., Ltd. | KOMERATE A060 is a mono-functional acrylate monomer. It features water solubility, excellent wetting, and low Tg. | |
| KOMERATE A060M | Green Chemical Co., Ltd. | KOMERATE A060M is a mono-functional monomer. It features water solubility, excellent wetting, and low Tg. It is recommended as a versatile intermediate for coatings and polymer modification. | |
| KOMERATE A086 | Green Chemical Co., Ltd. | KOMERATE A086 is a monofunctional acrylate monomer. It is characterized by low skin irritation, good adhesion, and flexibility. | |
| KOMERATE A089 | Green Chemical Co., Ltd. | KOMERATE A089 is a monofunctional monomer. It is characterized by good adhesion, low shrinkage, and low viscosity. | |
| KOMERATE A099 | Green Chemical Co., Ltd. | KOMERATE A099 is a reactive diluent that polymerizes when exposed to sources of free radicals. | |
| KOMERATE A100 | Green Chemical Co., Ltd. | KOMERATE A100 is mono-functional monomer. It features water solubility, excellent wetting, and low Tg. It is recommended as a versatile intermediate for coatings and polymer modification. | |
| KOMERATE A100M | Green Chemical Co., Ltd. | KOMERATE A100M is methoxy polyethylene glycol monomethacrylate. It features water solubility, and excellent wetting. It is recommended as a versatile intermediate for coatings and polymer modification. | |
| KOMERATE A109 | Green Chemical Co., Ltd. | KOMERATE A109 is a monofunctional monomer with long chain. It is characterized by good adhesion, low shrinkage and flexibility. | |
| KOMERATE A109M | Green Chemical Co., Ltd. | KOMERATE A109M is a monofunctional monomer. It is characterized by good flexibility, and good adhesion. | |
| KOMERATE A129 | Green Chemical Co., Ltd. | KOMERATE A129 is a monofunctional monomer. It is characterized by good flexibility and a long hydrophobic chain. | |
| KOMERATE A1290 | Green Chemical Co., Ltd. | KOMERATE A1290 is lauryl acrylate forms homopolymers and copolymers. It has a low viscosity and low toxicity monomer. | |
| KOMERATE A1290M | Green Chemical Co., Ltd. | KOMERATE A1290M is a monofunctional monomer. It is characterized by long chain hydrophobic group. It offers adhesion, flexibility, and low skin irritation. | |
| KOMERATE A1291 | Green Chemical Co., Ltd. | KOMERATE A1291 is Lauryl Acrylate 1214 (LA 1214), which is a low viscosity, low toxicity monomer with a long pendant aliphatic chain and the high reactivity of acrylates. | |
| KOMERATE A1291M | Green Chemical Co., Ltd. | KOMERATE A1291M is Lauryl methacrylate 1214 (LMA 1214) is a low viscosity, low toxicity monomer with a long pendant aliphatic chain and the high reactivity of acrylates. It is characterized by good adhesion, low shrinkage and flexibility. | |
| KOMERATE A129M | Green Chemical Co., Ltd. | KOMERATE A129M is a monofunctional monomer. It is characterized by good flexibility and a long hydrophobic chain. | |
| KOMERATE A149 | Green Chemical Co., Ltd. | KOMERATE A149 is tetradecyl acrylate. Low viscosity and improved adhesion to plastics, metals, and other difficult substrates. | |
| KOMERATE A149M | Green Chemical Co., Ltd. | KOMERATE A149M is a monofunctional monomer. It is characterized by good adhesion and good flexibility. | |
| KOMERATE A169 | Green Chemical Co., Ltd. | KOMERATE A169 is a monofunctional monomer. It is characterized by good flexibility, low shrinkage, and good adhesion. | |
| KOMERATE A1691 | Green Chemical Co., Ltd. | KOMERATE A1691 iscetyl acrylate. It is a monomer with a long chain hydrophobic backbone. It is used for manufacturing polymers and for use as a feed stock for syntheses. | |
| KOMERATE A169M | Green Chemical Co., Ltd. | KOMERATE A169M is a monofunctional methacrylate monomer. It is characterized by good flexibility, low shrinkage, and good water resistance. | |
| KOMERATE A189 | Green Chemical Co., Ltd. | KOMERATE A189 is stearyl acrylate or octadecyl acrylate. It is a monomer with a long chain hydrophobic backbone. It may act as a bubble breaker. | |
| KOMERATE A1891 | Green Chemical Co., Ltd. | KOMERATE A1891 is monofunctional acrylate monomer. It is a monomer with a long chain hydrophobic backbone. | |
| KOMERATE A189M | Green Chemical Co., Ltd. | KOMERATE A189M is stearyl methacrylate or octadecyl metha. It is a monomer with a long chain hydrophobic backbone. | |
| KOMERATE A2013 | Green Chemical Co., Ltd. | KOMERATE A2013 is monofunctional acrylate monomer. It has a water soluble, flexible, and low shrinkage. | |
| KOMERATE A209 | Green Chemical Co., Ltd. | KOMERATE A209 is a monofunctional monomer. It is characterized by low shrinkage, and good adhesion. | |
| KOMERATE A2091 | Green Chemical Co., Ltd. | KOMERATE A2091 is a monofunctional monomer. It is characterized by good flexibility and a long hydrophobic chain. | |
| KOMERATE A229 | Green Chemical Co., Ltd. | KOMERATE A229 is a monofunctional monomer. It is characterized by low shrinkage, and excellent flexibility. | |
| KOMERATE A2291 | Green Chemical Co., Ltd. | KOMERATE A2291 is a monofunctional monomer. It is characterized by low shrinkage, and excellent flexibility. | |
| KOMERATE A2291M | Green Chemical Co., Ltd. | KOMERATE A2291M is a monofunctional methacrylate monomer. It is characterized by low shrinkage, and excellent flexibility. | |
| KOMERATE A229M | Green Chemical Co., Ltd. | KOMERATE A229M is a monofunctional monomer. It is characterized by low shrinkage, and excellent flexibility. |
