| BLUESIL PRIM 10073 | Elkem Silicones | BLUESIL PRIM 10073 is a product intended to improve the adhesion of BLUESIL one-component and two-component elastomers to metals and certain painted surfaces. The product is available as a ready-to-use solution of reactants diluted in a solvent. | |
| BLUESIL PRIM 12076 | Elkem Silicones | BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactan...展开 BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactants diluted in a solvent. 收起 | |
| BLUESIL RES 8152P | Elkem Silicones | BLUESIL RES 8152P is a 50% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 8170P | Elkem Silicones | BLUESIL RES 8170P is used to manufacture rigid insulators in the high pressure process: laminates based on glass fabric, mica (mica paper), mica/glass composite fabric and asbestos. It offers outstanding mechanical properties. | |
| BLUESIL RES 8360M | Elkem Silicones | BLUESIL RES 8360M is a methyl silicone resin supplied as a solution in toluene and intended for the manufacture of flexible insulants. | |
| BLUESIL SLT 10B OFF WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10B PVC WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10T OFF WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| BLUESIL SLT 10T PVC WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| BLUESIL SLT 3B BLACK | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3B TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3B WHITE | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3E BLACK | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E WHITE | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3S TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 3S WHITE | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 4S TRANSCLUCENT | Elkem Silicones | BLUESIL SLT 4S is a one-component, moisture-cure silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, low modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT AQUARIUM BLACK | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起 | |
| BLUESIL SLT AQUARIUM TRANSLUCENT | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起 | |
| BLUESIL SLT NOVART S TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to...展开 BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to give a flexible seal of low modulus. 收起 | |
| BLUESIL SLT NOVART TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起 | |
| BLUESIL SLT NOVART WHITE | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起 | |
| BLUESIL SLT VEC 90 BLACK | Elkem Silicones | BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, fle...展开 BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, flexible seal. 收起 | |
| BLUESIL SLT VEC 99A BLACK | Elkem Silicones | BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and ...展开 BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and adhesion properties. Its advantage, relative to conventional two-component elastomers lies in the large tolerance relative to the accuracy of the ratio A/B. BLUESIL SLT VEC 99 has been specially designed to meet requirements in Structural Glazing applications. 收起 | |
| BLUESIL SLT VI 10 BLACK | Elkem Silicones | BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with h...展开 BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with high mechanical performance levels. 收起 | |
| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| Fujicure 5000 | Sanho Chemical Co., Ltd. | Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive ...展开 Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive and solvent-based coating formulation applications. 收起 | |
| Fujicure 5260 | Sanho Chemical Co., Ltd. | Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications...展开 Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications. 收起 | |
| Fujicure 5300 | Sanho Chemical Co., Ltd. | Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-...展开 Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-leveling coating formulation applications. 收起 | |
| Fujicure 5420 | Sanho Chemical Co., Ltd. | Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive f...展开 Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Fujicure FX-220 | Sanho Chemical Co., Ltd. | Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adh...展开 Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adhesive formulation applications. 收起 | |
| Fujicure FXD-821 | Sanho Chemical Co., Ltd. | Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesiv...展开 Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesive formulation applications. 收起 | |
| Fujicure FXD-822 | Sanho Chemical Co., Ltd. | Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and m...展开 Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and mortar formulation applications. 收起 | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起 | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Kingcure 2040-MS | Sanho Chemical Co., Ltd. | Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation appli...展开 Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation applications. 收起 | |
| Kingcure 515-KD | Sanho Chemical Co., Ltd. | Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adh...展开 Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adhesive formulation applications. 收起 | |
| Kingcure 613-B | Sanho Chemical Co., Ltd. | Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applicati...展开 Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applications. 收起 | |
| Kingcure 800-C | Sanho Chemical Co., Ltd. | Kingcure 800-C is a mercaptan terminated polymer in a light yellow-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingcure 800-C is most commonly used in construction adhesive formulation applications. | |
| Kingcure 800-F | Sanho Chemical Co., Ltd. | Kingcure 800-F is a mercaptan terminated polymer in a light yellow-colored liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s. Kingcure 800-F is most commonly used in construction adhesive formulation applications. | |
| Kingcure 800-S | Sanho Chemical Co., Ltd. | Kingcure 800-S is a mercaptan terminated polymer in a light yellow-colored viscous liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure 800-S is most commonly used in mortar and fa...展开 Kingcure 800-S is a mercaptan terminated polymer in a light yellow-colored viscous liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure 800-S is most commonly used in mortar and fast-setting adhesive formulation applications. 收起 | |
| Kingcure 925 | Sanho Chemical Co., Ltd. | Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adh...展开 Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adhesive, and coating formulation applications. 收起 | |
| Kingcure A-611 | Sanho Chemical Co., Ltd. | Kingcure A-611 is a modified aliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 13-25 mPa.s and a specific gravity of 1.09. Kingcure A-611 is most commonly used in adhesive formulation applications. | |
| Kingcure B-311 | Sanho Chemical Co., Ltd. | Kingcure B-311 is a low viscosity, modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 300-700 mPa.s. Kingcure B-311 is most commonly used in solvent-free coating formulation applicat...展开 Kingcure B-311 is a low viscosity, modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 300-700 mPa.s. Kingcure B-311 is most commonly used in solvent-free coating formulation applications. 收起 | |
| Kingcure B-312 | Sanho Chemical Co., Ltd. | Kingcure B-312 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 30 mPa.s. Kingcure B-312 is most commonly used in solvent-free coating and adhesive formulation applications. | |
| Kingcure D-211 | Sanho Chemical Co., Ltd. | Kingcure D-211 is a modified aliphatic polyamine epoxy curing agent in an amber-colored liquid form. This product has a viscosity of 50-150 mPa.s. Kingcure D-211 is most commonly used in coating and adhesive formulation applications. | |
| Kingcure I-621 | Sanho Chemical Co., Ltd. | Kingcure I-621 is a modified cycloaliphatic diamine in a slightly yellow-colored viscous liquid form. This product has a viscosity of 1500-2500 mPa.s and a specific gravity of 1.02. Kingcure I-621 is most commonly used in coating formulation applications. | |
| Kingcure I-631 | Sanho Chemical Co., Ltd. | Kingcure I-631 is a modified cycloaliphatic diamine in a light yellow-colored viscous liquid form. This product has a viscosity of 70-170 mPa.s and a specific gravity of 1.03. Kingcure I-631 is most commonly used in concrete adhesive formulation applicati...展开 Kingcure I-631 is a modified cycloaliphatic diamine in a light yellow-colored viscous liquid form. This product has a viscosity of 70-170 mPa.s and a specific gravity of 1.03. Kingcure I-631 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Kingcure I-934 | Sanho Chemical Co., Ltd. | Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and ...展开 Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and adhesive formulation applications. 收起 | |
| Kingcure K-11 | Sanho Chemical Co., Ltd. | Kingcure K-11 is an accelerated aliphatic amine curing agent in an amber-colored liquid form. This product has a viscosity of 700-2400 mPa.s and a specific gravity of 1.04. Kingcure K-11 is most commonly used in adhesive formulation applications. | |
| Kingcure K-863A | Sanho Chemical Co., Ltd. | Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applica...展开 Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applications. 收起 | |
| Kingcure M-510BS | Sanho Chemical Co., Ltd. | Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation ap...展开 Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation applications. 收起 | |
| Kingcure M-530 | Sanho Chemical Co., Ltd. | Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applic...展开 Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applications. 收起 | |
| Kingcure N-768 | Sanho Chemical Co., Ltd. | Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation app...展开 Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation applications. 收起 | |
| Kingcure N-784 | Sanho Chemical Co., Ltd. | Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, l...展开 Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, laminate, and adhesive formulation applications. 收起 | |
| Kingcure T-642NA | Sanho Chemical Co., Ltd. | Kingcure T-642NA is a modified aliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of less than 80 mPa.s. Kingcure T-642NA is most commonly used in coating and adhesive formulation applications. | |
| Kingcure X-165A | Sanho Chemical Co., Ltd. | Kingcure X-165A is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 50-150 mPa.s and a specific gravity of 1.11. Kingcure X-165A is most commonly used in solvent-free coating formulat...展开 Kingcure X-165A is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 50-150 mPa.s and a specific gravity of 1.11. Kingcure X-165A is most commonly used in solvent-free coating formulation applications. 收起 | |
| Kingcure X-2001 | Sanho Chemical Co., Ltd. | Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation application...展开 Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Kingmide 305 | Sanho Chemical Co., Ltd. | Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applicat...展开 Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applications. 收起 | |
| Kingmide 310 | Sanho Chemical Co., Ltd. | Kingmide 310 is a high molecular weight, high viscosity, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 30,000-50,000 mPa.s and a specific gravity of 0.97. Kingmide 310 is most commonly used in adhesive a...展开 Kingmide 310 is a high molecular weight, high viscosity, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 30,000-50,000 mPa.s and a specific gravity of 0.97. Kingmide 310 is most commonly used in adhesive and coating formulation applications. 收起 | |
| Kingmide 315 | Sanho Chemical Co., Ltd. | Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formula...展开 Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formulation applications. 收起 | |
| Kingmide 315-FC | Sanho Chemical Co., Ltd. | Kingmide 315-FC is a polyaminoamide-type curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 315-FC is most commonly used in adhesive formulation applications. | |
| Kingmide 315-FS | Sanho Chemical Co., Ltd. | Kingmide 315-FS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-15,000 mPa.s. Kingmide 315-FS is most commonly used in adhesive formulation applications. | |
| Kingmide 315-L | Sanho Chemical Co., Ltd. | Kingmide 315-L is a polyaminoamide-type curing agent in a brown-colored viscous liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.97. Kingmide 315-L is most commonly used in adhesive, sealant, surface coating, and pu...展开 Kingmide 315-L is a polyaminoamide-type curing agent in a brown-colored viscous liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.97. Kingmide 315-L is most commonly used in adhesive, sealant, surface coating, and putty formulation applications. 收起 | |
| Kingmide 315-S | Sanho Chemical Co., Ltd. | Kingmide 315-S is a high viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315-S is most commonly used in adhesive and high-solids anti-co...展开 Kingmide 315-S is a high viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315-S is most commonly used in adhesive and high-solids anti-corrosive coating formulation applications. 收起 | |
| Kingmide 326-A | Sanho Chemical Co., Ltd. | Kingmide 326-A is a polyaminoamide curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-16,000 mPa.s. Kingmide 326-A is most commonly used in adhesive formulation applications. | |
| Kingmide 328-A | Sanho Chemical Co., Ltd. | Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation application...展开 Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation applications. 收起 | |
| Kingmide 334 | Sanho Chemical Co., Ltd. | Kingmide 334 is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s and a specific gravity of 0.96. Kingmide 334 is most commonly used in adhesive formulation applications. | |
| Kingmide 338 | Sanho Chemical Co., Ltd. | Kingmide 338 is a low-viscosity, ractive polyamide resin in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s and a specific gravity of 0.97. Kingmide 338 is most commonly used in adhesive and putty formulation ap...展开 Kingmide 338 is a low-viscosity, ractive polyamide resin in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s and a specific gravity of 0.97. Kingmide 338 is most commonly used in adhesive and putty formulation applications. 收起 | |
| Kingmide 340 | Sanho Chemical Co., Ltd. | Kingmide 340 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 400-600 mPa.s and a specific gravity of 0.96. Kingmide 340 is most commonly used in coating, mortar, adhesive, and putty form...展开 Kingmide 340 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 400-600 mPa.s and a specific gravity of 0.96. Kingmide 340 is most commonly used in coating, mortar, adhesive, and putty formulation applications. 收起 | |
| Kingmide 370 | Sanho Chemical Co., Ltd. | Kingmide 370 is a medium-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 2500-4500 mPa.s and a specific gravity of 0.95. Kingmide 370 is most commonly used in adhesive and putty formulation appli...展开 Kingmide 370 is a medium-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 2500-4500 mPa.s and a specific gravity of 0.95. Kingmide 370 is most commonly used in adhesive and putty formulation applications. 收起 | |
| Kingmide 374-L | Sanho Chemical Co., Ltd. | Kingmide 374-L is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.95. Kingmide 374-L is most commonly used in mortar, adhesive, and putty formulati...展开 Kingmide 374-L is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.95. Kingmide 374-L is most commonly used in mortar, adhesive, and putty formulation applications. 收起 | |
| Kingmide 384-S | Sanho Chemical Co., Ltd. | Kingmide 384-S is a modified polyaminoamide epoxy adduct curing agent in a brown-colored viscous liquid form. This product has a viscosity of 7000-10,000 mPa.s. Kingmide 384-S is most commonly used in adhesive formulation applications. | |
| Kingmide 507-KS | Sanho Chemical Co., Ltd. | Kingmide 507-KS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 507-KS is most commonly used in adhesive formulation applications. | |
| Kingmide 513-F | Sanho Chemical Co., Ltd. | Kingmide 513-F is a poly amide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingmide 513-F is most commonly used in adhesive formulation applications. | |
| Kingmide 533 | Sanho Chemical Co., Ltd. | Kingmide 533 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 100-110°C. Kingmide 533 is most commonly used in flexographic printing ink formulation applications. | |
| Kingmide 550-A | Sanho Chemical Co., Ltd. | Kingmide 550-A is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550-A is most commonly used in hot-melt adhesive formulation applications. | |
| Kingmide 550-G | Sanho Chemical Co., Ltd. | Kingmide 550-G is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550-G is most commonly used in hot-melt adhesive formulation applications. | |
| Kingmide 551 | Sanho Chemical Co., Ltd. | Kingmide 551 is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C and an application temperature of 150-180°C. Kingmide 551 is most commonly used in hot-melt adhesive formulation applica...展开 Kingmide 551 is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C and an application temperature of 150-180°C. Kingmide 551 is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide 701 | Sanho Chemical Co., Ltd. | Kingmide 701 is a modified aliphatic amidoamine curing agent in an amber liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.98. Kingmide 701 is most commonly used in adhesive formulation applications. | |
| Kingmide 705 | Sanho Chemical Co., Ltd. | Kingmide 705 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 150-400 mPa.s and a specific gravity of 0.98. Kingmide 705 is most commonly used in mortar, putty, and adhesive formulation a...展开 Kingmide 705 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 150-400 mPa.s and a specific gravity of 0.98. Kingmide 705 is most commonly used in mortar, putty, and adhesive formulation applications. 收起 | |
| Kingmide 710-SS | Sanho Chemical Co., Ltd. | Kingmide 710-SS is a modified aliphatic amidoamine curing agent. This product has a viscosity of 150-500 mPa.s and a specific gravity of 0.99. Kingmide 710-SS is most commonly used in mortar and adhesive formulation applications. | |
| Kingmide 715-A | Sanho Chemical Co., Ltd. | Kingmide 715-A is a medium viscosity, modified polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s. Kingmide 715-A is most commonly used in putty and adhesive formulation applications. | |
| Kingmide 74 | Sanho Chemical Co., Ltd. | Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation app...展开 Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation applications. 收起 | |
| Kingmide 74-KB | Sanho Chemical Co., Ltd. | Kingmide 74-KB is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Kingmide 74-KB is most commonly used in putty and adhesive for...展开 Kingmide 74-KB is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Kingmide 74-KB is most commonly used in putty and adhesive formulation applications. 收起 | |
| Kingmide 74-NP | Sanho Chemical Co., Ltd. | Kingmide 74-NP is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.96. Kingmide 74-NP is most commonly used in putty and adhesive form...展开 Kingmide 74-NP is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.96. Kingmide 74-NP is most commonly used in putty and adhesive formulation applications. 收起 | |
| Kingmide H-110 | Sanho Chemical Co., Ltd. | Kingmide H-110 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 500-1000 mPa.s and a softening point of 105-115°C. Kingmide H-110 is most commonly used in hot-melt adhesive formulation application...展开 Kingmide H-110 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 500-1000 mPa.s and a softening point of 105-115°C. Kingmide H-110 is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide H-120 | Sanho Chemical Co., Ltd. | Kingmide H-120 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2200-2800 mPa.s and a softening point of 115-125°C. Kingmide H-120 is most commonly used in hot-melt adhesive formulation applicatio...展开 Kingmide H-120 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2200-2800 mPa.s and a softening point of 115-125°C. Kingmide H-120 is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide H-130 | Sanho Chemical Co., Ltd. | Kingmide H-130 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2000-4000 mPa.s and a softening point of 125-135°C. Kingmide H-130 is most commonly used in hot-melt adhesive formulation applicatio...展开 Kingmide H-130 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2000-4000 mPa.s and a softening point of 125-135°C. Kingmide H-130 is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide H-130W | Sanho Chemical Co., Ltd. | Kingmide H-130W is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2500-5000 mPa.s and a softening point of 125-135°C. Kingmide H-130W is most commonly used in hot-melt adhesive formulation applicat...展开 Kingmide H-130W is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2500-5000 mPa.s and a softening point of 125-135°C. Kingmide H-130W is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide H-140HP | Sanho Chemical Co., Ltd. | Kingmide H-140HP is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 5000-10,000 mPa.s and a softening point of 140-150°C. Kingmide H-140HP is most commonly used in hot-melt adhesive formulation appl...展开 Kingmide H-140HP is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 5000-10,000 mPa.s and a softening point of 140-150°C. Kingmide H-140HP is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide H-170HV | Sanho Chemical Co., Ltd. | Kingmide H-170HV is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 3000-7000 mPa.s and a softening point of 165-175°C. Kingmide H-170HV is most commonly used in hot-melt adhesive formulation applic...展开 Kingmide H-170HV is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 3000-7000 mPa.s and a softening point of 165-175°C. Kingmide H-170HV is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide X-2100 | Sanho Chemical Co., Ltd. | Kingmide X-2100 is a medium viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 6000-12,000 mPa.s and a specific gravity of 1.04. Kingmide X-2100 is most commonly used in adhesive, coating, ...展开 Kingmide X-2100 is a medium viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 6000-12,000 mPa.s and a specific gravity of 1.04. Kingmide X-2100 is most commonly used in adhesive, coating, and putty formulation applications. 收起 | |
| Kingmide X-220B | Sanho Chemical Co., Ltd. | Kingmide X-220B is a low viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s. Kingmide X-220B is most commonly used in adhesive, coating, and patch repair mortar formulation ap...展开 Kingmide X-220B is a low viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s. Kingmide X-220B is most commonly used in adhesive, coating, and patch repair mortar formulation applications. 收起 | |
| Silicon Dioxide GJ-103 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase th...展开 Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide JLJ-105 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is...展开 Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 |
