UL Prospector

成功!

成功保存搜索结果
BLUESIL PRIM 10073 Elkem Silicones BLUESIL PRIM 10073 is a product intended to improve the adhesion of BLUESIL one-component and two-component elastomers to metals and certain painted surfaces. The product is available as a ready-to-use solution of reactants diluted in a solvent.
BLUESIL PRIM 12076 Elkem Silicones BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactan...展开 BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactants diluted in a solvent. 收起
BLUESIL SLT 10B OFF WHITE Elkem Silicones BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起
BLUESIL SLT 10B PVC WHITE Elkem Silicones BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起
BLUESIL SLT 10T OFF WHITE Elkem Silicones BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起
BLUESIL SLT 10T PVC WHITE Elkem Silicones BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起
BLUESIL SLT 3B BLACK Elkem Silicones BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起
BLUESIL SLT 3B TRANSLUCENT Elkem Silicones BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起
BLUESIL SLT 3B WHITE Elkem Silicones BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起
BLUESIL SLT 3E BLACK Elkem Silicones BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions.
BLUESIL SLT 3E TRANSLUCENT Elkem Silicones BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions.
BLUESIL SLT 3E WHITE Elkem Silicones BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions.
BLUESIL SLT 3S TRANSLUCENT Elkem Silicones BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing.
BLUESIL SLT 3S WHITE Elkem Silicones BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing.
BLUESIL SLT 4S TRANSCLUCENT Elkem Silicones ​BLUESIL SLT 4S is a one-component, moisture-cure silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, low modulus watertight joint for general sanitary sealing.
BLUESIL SLT AQUARIUM BLACK Elkem Silicones BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起
BLUESIL SLT AQUARIUM TRANSLUCENT Elkem Silicones BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起
BLUESIL SLT NOVART S TRANSLUCENT Elkem Silicones BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to...展开 BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to give a flexible seal of low modulus. 收起
BLUESIL SLT NOVART TRANSLUCENT Elkem Silicones BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起
BLUESIL SLT NOVART WHITE Elkem Silicones BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起
BLUESIL SLT VEC 90 BLACK Elkem Silicones BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, fle...展开 BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, flexible seal. 收起
BLUESIL SLT VEC 99A BLACK Elkem Silicones ​BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and ...展开 ​BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and adhesion properties. Its advantage, relative to conventional two-component elastomers lies in the large  tolerance relative to the accuracy of the ratio A/B. BLUESIL SLT VEC 99 has been specially designed to meet requirements in Structural Glazing applications. 收起
BLUESIL SLT VI 10 BLACK Elkem Silicones BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with h...展开 BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with high mechanical performance levels. 收起
Calcium Sulfate Whisker Shanghai Tengmin Industry Co., Ltd. Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials.
Dow Corning® Class VI Elastomer C6-135 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-135 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part ...展开 Dow Corning® Class VI Elastomer C6-135 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part fabrication, extrusion, and medical devices, including those intended for implantation in humans for up to 29 days. This product has a nominal hardness of 35, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-150 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-150 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part ...展开 Dow Corning® Class VI Elastomer C6-150 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part fabrication, extrusion, and medical devices, including those intended for implantation in humans for up to 29 days. This product has a nominal hardness of 50, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-165 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-165 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part ...展开 Dow Corning® Class VI Elastomer C6-165 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part fabrication, extrusion, and medical devices, including those intended for implantation in humans for up to 29 days. This product has a nominal hardness of 65, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-180 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-180 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part ...展开 Dow Corning® Class VI Elastomer C6-180 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part fabrication, extrusion, and medical devices, including those intended for implantation in humans for up to 29 days. This product has a nominal hardness of 80, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-235 Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-235 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a cat...展开 Dow Corning® Class VI Elastomer C6-235 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a catalyst is necessary to accomplish cure. This product has a nominal hardness of 35, Shore A durometer. 收起
Dow Corning® Class VI Elastomer C6-250 Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-250 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a cat...展开 Dow Corning® Class VI Elastomer C6-250 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a catalyst is necessary to accomplish cure. This product has a nominal hardness of 50, Shore A durometer. 收起
Dow Corning® Class VI Elastomer C6-265 Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-265 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a cat...展开 Dow Corning® Class VI Elastomer C6-265 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a catalyst is necessary to accomplish cure. This product has a nominal hardness of 65, Shore A durometer. 收起
Dow Corning® Class VI Elastomer C6-350LH Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-350LH Parts A & B is a platinum-catalyzed heat-cured silicone high consistency rubber for part fabrication, extrusion and medical devices, including those intended for implantation in humans for up to 29 days. It is supp...展开 Dow Corning® Class VI Elastomer C6-350LH Parts A & B is a platinum-catalyzed heat-cured silicone high consistency rubber for part fabrication, extrusion and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product exhibits lower hysteresis losses (more resiliency) compared to other platinum-catalyzed HCRs, and a reduction in crack growth propagation. 收起
Dow Corning® Class VI Elastomer C6-530 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-530 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part k...展开 Dow Corning® Class VI Elastomer C6-530 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portion of which must be thoroughly blended together prior to use. This product has a nominal hardness of 30, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-540 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-540 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part k...展开 Dow Corning® Class VI Elastomer C6-540 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portion of which must be thoroughly blended together prior to use. This product has a nominal hardness of 40, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-550 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-550 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part k...展开 Dow Corning® Class VI Elastomer C6-550 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portion of which must be thoroughly blended together prior to use. This product has a nominal hardness of 50, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-560 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-560 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part k...展开 Dow Corning® Class VI Elastomer C6-560 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portion of which must be thoroughly blended together prior to use. This product has a nominal hardness of 60, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-570 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-570 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part k...展开 Dow Corning® Class VI Elastomer C6-570 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portion of which must be thoroughly blended together prior to use. This product has a nominal hardness of 70, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. I...展开 Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together before use. This product has a nominal hardness of 40, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-750 Liquid Silicone Rubber Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. I...展开 Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together before use. This product has a nominal hardness of 50, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-770 Liquid Silicone Rubber Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-770 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. I...展开 Dow Corning® Class VI Elastomer C6-770 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together before use. This product has a nominal hardness of 70, durometer, Shore A. 收起
Dow Corning® MG 7-9800 Soft Skin Adhesives Parts A & B Dow Corning Healthcare Dow Corning® MG 7-9800 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications...展开 Dow Corning® MG 7-9800 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications. This product has low adhesion on the skin. 收起
Dow Corning® MG 7-9850 Soft Skin Adhesives Parts A & B Dow Corning Healthcare Dow Corning® MG 7-9850 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications...展开 Dow Corning® MG 7-9850 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications. This product has medium adhesion on the skin. 收起
Dow Corning® MG 7-9900 Soft Skin Adhesives Parts A & B Dow Corning Healthcare Dow Corning® MG 7-9900 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications...展开 Dow Corning® MG 7-9900 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications. This product has high adhesion on the skin. 收起
Dow Corning® MG-2401 Silicone Adhesive Dow Corning Healthcare Dow Corning® MG-2401 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy ap...展开 Dow Corning® MG-2401 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy appliances, attaching appliances for patient monitoring, affixing surgical dressings and pads, adhering external prosthetic devices, and attaching hairpiece devices. 收起
Dow Corning® MG-2402 Silicone Adhesive Dow Corning Healthcare Dow Corning® MG-2402 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy ap...展开 Dow Corning® MG-2402 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy appliances, attaching appliances for patient monitoring, affixing surgical dressings and pads, adhering external prosthetic devices, and attaching hairpiece devices. 收起
Dow Corning® MG-2502 Silicone Adhesive Dow Corning Healthcare Dow Corning® MG-2502 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy ap...展开 Dow Corning® MG-2502 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy appliances, attaching appliances for patient monitoring, affixing surgical dressings and pads, adhering external prosthetic devices, and attaching hairpiece devices. 收起
Dow Corning® QP1-30 Silicone Elastomer Dow Corning Healthcare Dow Corning® QP1-30 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-...展开 Dow Corning® QP1-30 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications. Once compounded with peroxide it can be used to fabricate parts by extrusion, calendaring or molding. When compounded and cured as indicated, the resulting elastomer consists of cross-linked dimethyl and methyl-vinyl siloxane copolymers and reinforcing silica. 收起
Dow Corning® QP1-50 Silicone Elastomer Dow Corning Healthcare Dow Corning® QP1-50 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-...展开 Dow Corning® QP1-50 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications. Once compounded with peroxide it can be used to fabricate parts by extrusion, calendaring or molding. When compounded and cured as indicated, the resulting elastomer consists of cross-linked dimethyl and methyl-vinyl siloxane copolymers and reinforcing silica. 收起
Dow Corning® QP1-60 Silicone Elastomer Dow Corning Healthcare Dow Corning® QP1-60 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-...展开 Dow Corning® QP1-60 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications. Once compounded with peroxide it can be used to fabricate parts by extrusion, calendaring or molding. When compounded and cured as indicated, the resulting elastomer consists of cross-linked dimethyl and methyl-vinyl siloxane copolymers and reinforcing silica. 收起
Dow Corning® QP1-70 Silicone Elastomer Dow Corning Healthcare Dow Corning® QP1-70 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-...展开 Dow Corning® QP1-70 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications. Once compounded with peroxide it can be used to fabricate parts by extrusion, calendaring or molding. When compounded and cured as indicated, the resulting elastomer consists of cross-linked dimethyl and methyl-vinyl siloxane copolymers and reinforcing silica. 收起
Dow Corning® QPI-230 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-230 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...展开 Dow Corning® QPI-230 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 30, durometer Shore A. 收起
Dow Corning® QPI-240 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-240 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...展开 Dow Corning® QPI-240 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 40, durometer Shore A. 收起
Dow Corning® QPI-250 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-250 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...展开 Dow Corning® QPI-250 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 50, durometer Shore A. 收起
Dow Corning® QPI-260 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-260 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...展开 Dow Corning® QPI-260 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 60, durometer Shore A. 收起
Dow Corning® QPI-270 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-270 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...展开 Dow Corning® QPI-270 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 70, durometer Shore A. 收起
Fumed Silica (A-150) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起
Fumed Silica (A-200) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica (A-380) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica 972 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
Fumed Silica 974 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
Griltex® 11A EMS-CHEMIE AG (PRIMID) Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a...展开 Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® 1A EMS-CHEMIE AG (PRIMID) Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...展开 Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® 2A EMS-CHEMIE AG (PRIMID) Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...展开 Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® 2A S EMS-CHEMIE AG (PRIMID) Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination ...展开 Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® 6E EMS-CHEMIE AG (PRIMID) Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® 8E EMS-CHEMIE AG (PRIMID) Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® 9E EMS-CHEMIE AG (PRIMID) Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is well used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® CE 20 EMS-CHEMIE AG (PRIMID) Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...展开 Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® CE 21 EMS-CHEMIE AG (PRIMID) Griltex® CE 21 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...展开 Griltex® CE 21 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 160-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® CE 22 EMS-CHEMIE AG (PRIMID) Griltex® CE 22 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...展开 Griltex® CE 22 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® CT 100 EMS-CHEMIE AG (PRIMID) Griltex® CT 100 is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle ...展开 Griltex® CT 100 is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® CT 101 EMS-CHEMIE AG (PRIMID) Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 210-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® CT 102 EMS-CHEMIE AG (PRIMID) Griltex® CT 102 is a polyphenylamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various parti...展开 Griltex® CT 102 is a polyphenylamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1260A EMS-CHEMIE AG (PRIMID) Griltex® D 1260A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It h...展开 Griltex® D 1260A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has good steam and dry cleaning resistance. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1299A EMS-CHEMIE AG (PRIMID) Griltex® D 1299A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, non-wovens, apparel materials and non-textile substrates. It is available in granule form in various pa...展开 Griltex® D 1299A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, non-wovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1309E EMS-CHEMIE AG (PRIMID) Griltex® D 1309E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1309E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1377E EMS-CHEMIE AG (PRIMID) Griltex® D 1377E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1377E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a lamination temperature of 170-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1442E EMS-CHEMIE AG (PRIMID) Griltex® D 1442E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1442E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 190-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1500A EMS-CHEMIE AG (PRIMID) Griltex® D 1500A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1500A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 150-170°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1519E EMS-CHEMIE AG (PRIMID) Griltex® D 1519E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1519E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1523A EMS-CHEMIE AG (PRIMID) Griltex® D 1523A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1523A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 210-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1539E EMS-CHEMIE AG (PRIMID) Griltex® D 1539E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1539E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 140-170°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1541A EMS-CHEMIE AG (PRIMID) Griltex® D 1541A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1541A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1549A EMS-CHEMIE AG (PRIMID) Griltex® D 1549A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...展开 Griltex® D 1549A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 180-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1556A EMS-CHEMIE AG (PRIMID) Griltex® D 1556A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1556A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1566A EMS-CHEMIE AG (PRIMID) Griltex® D 1566A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...展开 Griltex® D 1566A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1582E EMS-CHEMIE AG (PRIMID) Griltex® D 1582E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1582E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 120-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1595E EMS-CHEMIE AG (PRIMID) Griltex® D 1595E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1595E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1616E EMS-CHEMIE AG (PRIMID) Griltex® D 1616E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1616E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1619E EMS-CHEMIE AG (PRIMID) Griltex® D 1619E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1619E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 210-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1655E EMS-CHEMIE AG (PRIMID) Griltex® D 1655E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1655E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 200-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1662A EMS-CHEMIE AG (PRIMID) Griltex® D 1662A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...展开 Griltex® D 1662A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1666A EMS-CHEMIE AG (PRIMID) Griltex® D 1666A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...展开 Griltex® D 1666A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 140-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1682E EMS-CHEMIE AG (PRIMID) Griltex® D 1682E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1682E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1694A EMS-CHEMIE AG (PRIMID) Griltex® D 1694A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1694A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1709A EMS-CHEMIE AG (PRIMID) Griltex® D 1709A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1709A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1796A EMS-CHEMIE AG (PRIMID) Griltex® D 1796A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1796A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1841E EMS-CHEMIE AG (PRIMID) Griltex® D 1841E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1841E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 210-230°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 1939E EMS-CHEMIE AG (PRIMID) Griltex® D 1939E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1939E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 190-230°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® D 2132E EMS-CHEMIE AG (PRIMID) Griltex® D 2132E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 2132E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a lamination temperature of 110-140°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起