UL Prospector

成功!

成功保存搜索结果
BLUESIL PRIM 10073 Elkem Silicones BLUESIL PRIM 10073 is a product intended to improve the adhesion of BLUESIL one-component and two-component elastomers to metals and certain painted surfaces. The product is available as a ready-to-use solution of reactants diluted in a solvent.
BLUESIL PRIM 12076 Elkem Silicones BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactan...展开 BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactants diluted in a solvent. 收起
BLUESIL SLT 10B OFF WHITE Elkem Silicones BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起
BLUESIL SLT 10B PVC WHITE Elkem Silicones BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起
BLUESIL SLT 10T OFF WHITE Elkem Silicones BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起
BLUESIL SLT 10T PVC WHITE Elkem Silicones BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起
BLUESIL SLT 3B BLACK Elkem Silicones BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起
BLUESIL SLT 3B TRANSLUCENT Elkem Silicones BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起
BLUESIL SLT 3B WHITE Elkem Silicones BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起
BLUESIL SLT 3E BLACK Elkem Silicones BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions.
BLUESIL SLT 3E TRANSLUCENT Elkem Silicones BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions.
BLUESIL SLT 3E WHITE Elkem Silicones BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions.
BLUESIL SLT 3S TRANSLUCENT Elkem Silicones BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing.
BLUESIL SLT 3S WHITE Elkem Silicones BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing.
BLUESIL SLT 4S TRANSCLUCENT Elkem Silicones ​BLUESIL SLT 4S is a one-component, moisture-cure silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, low modulus watertight joint for general sanitary sealing.
BLUESIL SLT AQUARIUM BLACK Elkem Silicones BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起
BLUESIL SLT AQUARIUM TRANSLUCENT Elkem Silicones BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起
BLUESIL SLT NOVART S TRANSLUCENT Elkem Silicones BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to...展开 BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to give a flexible seal of low modulus. 收起
BLUESIL SLT NOVART TRANSLUCENT Elkem Silicones BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起
BLUESIL SLT NOVART WHITE Elkem Silicones BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起
BLUESIL SLT VEC 90 BLACK Elkem Silicones BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, fle...展开 BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, flexible seal. 收起
BLUESIL SLT VEC 99A BLACK Elkem Silicones ​BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and ...展开 ​BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and adhesion properties. Its advantage, relative to conventional two-component elastomers lies in the large  tolerance relative to the accuracy of the ratio A/B. BLUESIL SLT VEC 99 has been specially designed to meet requirements in Structural Glazing applications. 收起
BLUESIL SLT VI 10 BLACK Elkem Silicones BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with h...展开 BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with high mechanical performance levels. 收起
Calcium Sulfate Whisker Shanghai Tengmin Industry Co., Ltd. Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials.
Request Sample DEGALAN® 4150 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylen...展开 DEGALAN® 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGALAN® 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起
Request Sample DEGALAN® 4151 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (...展开 DEGALAN® 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起
Request Sample DEGALAN® 4174 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium...展开 DEGALAN® 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). 收起
Request Sample DEGALAN® 4792 L Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® 4792 L is tailormade for applications wher...展开 DEGALAN® 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGALAN® 4792 L will achieve good adhesion to aluminium. 收起
Request Sample DEGALAN® 4793 L Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® 4793 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® 4793 L is tailormade for applications wher...展开 DEGALAN® 4793 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® 4793 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGALAN® 4793 L will achieve good adhesion to aluminium. 收起
Request Sample DEGALAN® P 24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® P 24 is a bead polymer based on methyl methacrylate and n-butyl methacrylate. It is mainly applied as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® P 24 in formulati...展开 DEGALAN® P 24 is a bead polymer based on methyl methacrylate and n-butyl methacrylate. It is mainly applied as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® P 24 in formulation with PVC-copolymer shows excellent performance in aluminum blister and food packaging. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起
Request Sample DEGALAN® PM 555 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® PM 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylen...展开 DEGALAN® PM 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGALAN® PM 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起
Request Sample DEGALAN® PM 666 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® PM 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (...展开 DEGALAN® PM 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起
Request Sample DEGALAN® VP 4220 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethy...展开 DEGALAN® VP 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGALAN® VP 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起
Request Sample DEGALAN® VP 4221 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyren...展开 DEGALAN® VP 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起
Request Sample DEGALAN® VP 4240 D Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® VP 4240 D achieves direct adhesion to...展开 DEGALAN® VP 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® VP 4240 D achieves direct adhesion to aluminium, no primer is required. 收起
Request Sample DEGALAN® VP 4250 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethy...展开 DEGALAN® VP 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGALAN® VP 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGALAN® VP 4250 E has a higher solid content compared to the equivalent grade DEGALAN® 4150 E. 收起
Request Sample DEGALAN® VP 4251 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGALAN® VP 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polyst...展开 DEGALAN® VP 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGALAN® VP 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGALAN® VP 4251 E has a higher solid content compared to the equivalent grade DEGALAN® 4151 E. 收起
Request Sample DEGALAN® VP 4294 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...展开 DEGALAN® VP 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGALAN® VP 4294 E has a high solid content of 52%. 收起
Request Sample DEGALAN® VP 4311 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4311 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4311 E achieves direct adhesion on aluminium and PET. Major usage is as a binder in PVC-free, primerless heat seal lacquers for sea...展开 DEGALAN® VP 4311 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4311 E achieves direct adhesion on aluminium and PET. Major usage is as a binder in PVC-free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). 收起
Request Sample DEGALAN® VP 4322 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tran...展开 DEGALAN® VP 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). 收起
Request Sample DEGALAN® VP P 34 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP P 34 is a bead polymer based on methyl methacrylate and n-butyl methacrylate. Usage as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). It is particularly recommended for use...展开 DEGALAN® VP P 34 is a bead polymer based on methyl methacrylate and n-butyl methacrylate. Usage as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). It is particularly recommended for use as a heat seal binder with direct adhesion to aluminium. A formulation with PVC-copolymer is therefore obsolete. DEGALAN®VP P 34 shows excellent performance in aluminium blister and food packaging. 收起
Request Sample DYNAPOL® Catalyst 1203 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® Catalyst 1203 is a non-ionic blocked sulfonic acid catalyst for aminoplast crosslinking. It is supplied in the form of 50% in xylene.
Request Sample DYNAPOL® Catalyst C 31 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 改性四烷氧基锡。用于瓷漆烤漆的PUR体系。封端单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® L 205 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings as a primer for hot dip galvanized steel, and may also be used for aluminium primers and appliance finishing. In can coatings, it may be used fo...展开 DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings as a primer for hot dip galvanized steel, and may also be used for aluminium primers and appliance finishing. In can coatings, it may be used for metal decorating enamels and interior can coatings. 收起
Request Sample DYNAPOL® L 208 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 208 is a saturated, high molecular, branched co-polyester. It is recommended for use in coil coating applications such as primers for hot dip galvanized steel and hot laminating adhesives. This product may also be suitable for can coating appli...展开 DYNAPOL® L 208 is a saturated, high molecular, branched co-polyester. It is recommended for use in coil coating applications such as primers for hot dip galvanized steel and hot laminating adhesives. This product may also be suitable for can coating applications like foil primers and printing inks. 收起
Request Sample DYNAPOL® L 210 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 210 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings for hot laminating adhesives. In can coatings, it is recommended for foil primers and printing inks, and may also be used for heat sealing lacqu...展开 DYNAPOL® L 210 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings for hot laminating adhesives. In can coatings, it is recommended for foil primers and printing inks, and may also be used for heat sealing lacquers. 收起
Request Sample DYNAPOL® L 323 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 323 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coating applications such as adhesion promoters. This product may also be suitable for metal decorating enamels, foil primers, printing inks, and heat sea...展开 DYNAPOL® L 323 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coating applications such as adhesion promoters. This product may also be suitable for metal decorating enamels, foil primers, printing inks, and heat sealing lacquers. 收起
Request Sample DYNAPOL® L 651 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 651 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coatings, especially for interior can coatings and adhesion promoters. It may also be used for metal decorating enamels and heat sealing lacquers.
Request Sample DYNAPOL® L 658 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 658 is a saturated, high molecular, branched co-polyester. It is recommended for use in can coating applications such as interior can coatings. This product may also be suitable for metal decorating enamels.
Request Sample DYNAPOL® L 850 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 850 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coating applications such as elastification resins. This product is also recommended for tube-and aerosol can coatings, and may be suitable for metal dec...展开 DYNAPOL® L 850 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coating applications such as elastification resins. This product is also recommended for tube-and aerosol can coatings, and may be suitable for metal decorating enamels. 收起
Request Sample DYNAPOL® L 907 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 907 is a saturated, high molecular, linear co-polyester. It is recommended for use in interior can coating applications. This product may also be used for metal decorating enamels.
Request Sample DYNAPOL® L 914 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 914 is a saturated, high molecular, linear co-polyester. It is recommended for use in interior can coating applications. This product may also be used for metal decorating enamels.
Request Sample DYNAPOL® LH 318-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 318-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as interior can coatings. This product may also be suitable for primers for metal decorating enamels.
Request Sample DYNAPOL® LH 538-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 538-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior architecture, appliance finishing, and traffic applications.
Request Sample DYNAPOL® LH 724-24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 724-24 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture. This product may also be suitable for appliance finishing and t...展开 DYNAPOL® LH 724-24 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture. This product may also be suitable for appliance finishing and traffic uses. 收起
Request Sample DYNAPOL® LH 727-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 727-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially for back coatings.
Request Sample DYNAPOL® LH 744-23 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 744-23 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially for exterior architecture.
Request Sample DYNAPOL® LH 773-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 773-01 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings.
Request Sample DYNAPOL® LH 775-52 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 775-52 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels. It may also be used for tube and aerosol can coatings.
Request Sample DYNAPOL® LH 815-05 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 815-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, interior can coatings, and tube and aerosol can coatings. This product may also be suitable ...展开 DYNAPOL® LH 815-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, interior can coatings, and tube and aerosol can coatings. This product may also be suitable for coil coating applications such as primers for hot dip galvanized steel and primers for aluminium. 收起
Request Sample DYNAPOL® LH 820-16 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 820-16 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as primers for hot dip galvanized steel. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 822-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 822-01 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior architecture and for traffic uses. This product may also be suitable for appliance finishing app...展开 DYNAPOL® LH 822-01 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior architecture and for traffic uses. This product may also be suitable for appliance finishing applications. 收起
Request Sample DYNAPOL® LH 823-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 823-01 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially for tube and aerosol can coatings. This product may also be suitable for metal decorating enamels.
Request Sample DYNAPOL® LH 824-16 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 824-16 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as primers for hot dip galvanized steel. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 826-05/A Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 826-05/A is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, and coil coatings such as interior architecture. This product may be suitable for other co...展开 DYNAPOL® LH 826-05/A is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, and coil coatings such as interior architecture. This product may be suitable for other coil coating applications, such as appliance finishing, primers for hot dip galvanized steel, and primers for aluminium. 收起
Request Sample DYNAPOL® LH 828-24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 828-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture and back coatings. This product may also be suitable for exterior architecture and traffic uses...展开 DYNAPOL® LH 828-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture and back coatings. This product may also be suitable for exterior architecture and traffic uses. 收起
Request Sample DYNAPOL® LH 830-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 830-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings. This product is also recommended for co...展开 DYNAPOL® LH 830-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings. This product is also recommended for coil coating applications such as exterior and interior architecture, appliance finishing, and traffic uses. 收起
Request Sample DYNAPOL® LH 832-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 832-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture, appliance finishing, and traffic uses.
Request Sample DYNAPOL® LH 833-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 833-03 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially primers for hot dip galvanized steel and primers for aluminium. It may also be suitable for applian...展开 DYNAPOL® LH 833-03 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially primers for hot dip galvanized steel and primers for aluminium. It may also be suitable for appliance finishing and for metal decorating enamels. 收起
Request Sample DYNAPOL® LH 834-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 834-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 838-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 838-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses and for can coating applicatio...展开 DYNAPOL® LH 838-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses and for can coating applications like metal decorating enamels. 收起
Request Sample DYNAPOL® LH 874-26 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 874-26 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture. This product may also be suitable for appliance finishing and for back coatings.
Request Sample DYNAPOL® LH 898-14 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 898-14 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses.
Request Sample DYNAPOL® LS 4131-10 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 4131-10 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coatings for traffic uses and for can coatings such as foil primers and printing inks. Other can coating applicati...展开 DYNAPOL® LS 4131-10 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coatings for traffic uses and for can coatings such as foil primers and printing inks. Other can coating applications for this product may include adhesion promoters and heat sealing lacquers. 收起
Request Sample DYNAPOL® LS 436-12 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 436-12 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture. This product may also be suitable for can coatings...展开 DYNAPOL® LS 436-12 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture. This product may also be suitable for can coatings, including heat sealing lacquers. 收起
Request Sample DYNAPOL® P 1500 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® P 1500 is a saturated, high molecular, semi-crystallin, linear co-polyester resin. It is recommended for thermoplastic applications.
Request Sample DYNAPOL® Terra 125 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® Terra 125 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil...展开 DYNAPOL® Terra 125 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as exterior and interior architecture, and may also be suitable for appliance finishing applications. 收起
Request Sample DYNAPOL® Terra 127-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® Terra 125 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as e...展开 DYNAPOL® Terra 125 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as exterior and interior architecture, and may also be suitable for primers for hot dip galvanized steel and primers for aluminium. 收起
Request Sample DYNAPOL® UB 1052-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 热固化单组分聚氨酯体系。用于PUR瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 1173-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 热固化单组分聚氨酯体系。用于PUR瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 1174-27 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® UB 1174-27 is a blocked one pack polyester-polyurethane system. It is recommended for coil coating applications such as exterior architecture. This product may also be suitable for traffic uses and for industrial coatings.
Request Sample DYNAPOL® UB 1256-06 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 热固化单组分体系。用于瓷漆烤漆的PUR体系。封端单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 41-05 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® UB 41-05 is a blocked one pack polyester-polyurethane system. It is recommended for can coating applications such as metal decorating enamels. This product may also be suitable for coil coatings, such as interior architecture, appliance finishing...展开 DYNAPOL® UB 41-05 is a blocked one pack polyester-polyurethane system. It is recommended for can coating applications such as metal decorating enamels. This product may also be suitable for coil coatings, such as interior architecture, appliance finishing, and primers for aluminium. 收起
Request Sample DYNAPOL® UB 790-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 热固化单组分聚氨酯体系。用于PUR瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 791-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 热固化单组分聚氨酯体系。用于PUR瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 877-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 基于饱和低分子量羟基聚酯树脂和己内酰胺封闭聚氨酯树脂的热固化单组分聚氨酯体系。用于瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 909-06 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 聚氨酯树脂溶液。用于瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Fumed Silica (A-150) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起
Fumed Silica (A-200) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica (A-380) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica 972 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
Fumed Silica 974 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
Griltex® 11A EMS-CHEMIE AG (PRIMID) Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a...展开 Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® 1A EMS-CHEMIE AG (PRIMID) Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...展开 Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® 2A EMS-CHEMIE AG (PRIMID) Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...展开 Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® 2A S EMS-CHEMIE AG (PRIMID) Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination ...展开 Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® 6E EMS-CHEMIE AG (PRIMID) Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® 8E EMS-CHEMIE AG (PRIMID) Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® 9E EMS-CHEMIE AG (PRIMID) Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is well used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起
Griltex® CE 20 EMS-CHEMIE AG (PRIMID) Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...展开 Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起