| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...展开 DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...展开 DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 4174 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing alum...展开 DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). 收起 | Request Sample |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...展开 DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起 | Request Sample |
| DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...展开 DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起 | Request Sample |
| DEGACRYL® HS 4240 D | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion ...展开 DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion to aluminum, no primer is required. 收起 | Request Sample |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...展开 DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. 收起 | Request Sample |
| DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...展开 DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. 收起 | Request Sample |
| DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...展开 DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. 收起 | Request Sample |
| DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tra...展开 DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). 收起 | Request Sample |
| DEGACRYL® HS 4792 L | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applicati...展开 DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGACRYL® HS 4792 L will achieve good adhesion to aluminium. 收起 | Request Sample |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...展开 DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...展开 DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| Dimer Acid | Anhui Elite Industrial Co., Ltd | Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起 | |
| Formaldehyde | Nanjing Shuguang Chemical Group | Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to...展开 Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to fabricate formaldehyde-phenolic resins, urea resins, melamine resins, pentaerythritol, and hexamethylenamine. 收起 | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起 | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| KH-540 (SG-Si 1110) | Nanjing Shuguang Chemical Group | KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be us...展开 KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起 | |
| KH-550 (SG-Si 1100) | Nanjing Shuguang Chemical Group | KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in ...展开 KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起 | |
| KH-560 (SG-Si 187) | Nanjing Shuguang Chemical Group | KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It ...展开 KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It can also improve the cohesive force of acrylic latex, sealants, polyurethanes, and epoxy resins for glass sealants. 收起 | |
| KH-570 (SG-Si 174) | Nanjing Shuguang Chemical Group | KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under ...展开 KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under dry or hygrometric conditions. 收起 | |
| POLYVEST® 110 | Evonik Operations GmbH, BL Coating & Adhesive Resins | 应用：封闭剂和黏结剂、防腐漆、汽缸盖衬垫浸渍、矿物基质浸渍、树脂改性、混炼胶。供货形式：粘性液体，不挥发份>99.8%。 | Request Sample |
| POLYVEST® 130 | Evonik Operations GmbH, BL Coating & Adhesive Resins | 应用：用于塑料涂装的增塑剂；用作PUR泡沫的脱模助剂；用于树脂改性；提高植物油的自干性能；室内用途的单层表面涂料（例如：机器设备用漆）的单一主体树脂；可回收橡胶的主体树脂。供货形式：粘性液体，不挥发份>99.8%。 | Request Sample |
| POLYVEST® eCO 110 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 110 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 110 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification...展开 POLYVEST® eCO 110 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 110 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 110 Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO 110 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and others, and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 110 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizer for rubber compounds, binder for recycled rubber compounds, electrical insulations and potting compounds, release agents for polyurethane foams, a modifier of vegetable oils, binder for oxidative drying alkyd resins, binder for dusty and dry quartz sand, binder for soil stabilization, and many more. 收起 | Request Sample |
| POLYVEST® eCO 130 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification...展开 POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 130 Bio brings the same well-known performance but has reduced carbon emissions. The apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 130 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 130 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizers for rubber compounds, binders for recycled rubber compounds, release agents for polyurethane foams, cell openers for polyurethane foams, defoamers, modifiers of resin systems, a modifier of vegetable oils, binder for dusty and dry quartz sand, and many more. 收起 | Request Sample |
| POLYVEST® eCO EP MA 100 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and acce...展开 POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. POLYVEST® eCO EP MA 100 Bio is compliant with the sustainability criteria laid down by the ISCC, a voluntary certification and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO EP MA 100 Bio brings the same well-known performance but has reduced carbon emissions. 收起 | Request Sample |
| POLYVEST® eCO HT Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a ...展开 POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a highly reactive binder providing versatile opportunities for precise chemical modifications and reactions. POLYVEST® eCO HT Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO HT Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO HT Bio exhibits the following features: high chemical resistance towards acids and bases, excellent water resistance, excellent electrical insulation properties, high cold resistance by keeping good flexibility at low temperatures, good solubility in aliphatics, aromatics, and ethers, low moisture and gas permeability, good adhesion to various substrates. POLYVEST® eCO HT Bio is used in adhesive and sealant compositions, insulated glass sealants, waterproofing membranes and coatings, gap fillers and expansion joints, electrical insulations and potting compounds, binder for rubber-based sealants and recycled rubber compounds, polymer modification, and many more. 收起 | Request Sample |
| POLYVEST® eCO MA 75 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO MA 75 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessibl...展开 POLYVEST® eCO MA 75 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. POLYVEST® eCO MA 75 Bio is compliant with the sustainability criteria laid down by the ISCC, a voluntary certification and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO MA 75 Bio brings the same well-known performance but has reduced carbon emissions. The polar, hydrophobic hydrocarbon resin POLYVEST® eCO MA 75 Bio is a highly reactive binder featuring characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers, good compatibility with long-oil alkyd resins, rosin resins and zinc resonates. POLYVEST® eCO MA 75 Bio is used in adhesives and sealants compositions, electrical insulations, and potting compounds (2pack systems), polymeric chalk activator in EPDM-compounds, modifier in carbon black filled EPDM-compounds, modifier in silica filled rubber compounds, modifier in rubber compounds for car tires, modifier in silicone sealants, and many more. 收起 | Request Sample |
| POLYVEST® EP MA 100 | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® EP MA 100 is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible fo...展开 POLYVEST® EP MA 100 is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. 收起 | Request Sample |
| POLYVEST® HT | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® HT is a stereospecific, low viscous and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® HT is a highly reactive ...展开 POLYVEST® HT is a stereospecific, low viscous and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® HT is a highly reactive binder providing versatile opportunities for precise chemical modifications and reactions. POLYVEST® HT exhibits the following features: high chemical resistance towards acids and bases, excellent water resistance, excellent electrical insulation properties, high cold resistance by keeping good flexibility at low temperatures, good solubility in aliphatics, aromatics and ethers, low moisture and gas permeability, good adhesion to various substrates. POLYVEST® HT is used in adhesive and sealant compositions, insulated glass sealants, waterproofing membranes and coatings, gap fillers and expansion joints, electrical insulations and potting compounds, binder for rubber based sealants and recycled rubber compounds, polymer modification, and many more. 收起 | Request Sample |
| POLYVEST® MA 75 | Evonik Operations GmbH, BL Coating & Adhesive Resins | 应用：双组分体系中的交联剂组分，例如电缆密封剂、封闭和黏结剂、橡胶组分，特别是EPDM组分中的聚合白垩活化剂。水溶性，氧化干燥黏合剂。供货形式：粘性液体，不挥发份>99.8%。 | Request Sample |
| SARAWAX SX 105 | Evonik Operations GmbH, BL Coating & Adhesive Resins | SARAWAX SX 105 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a drop point of 114-120 °C. The product can be used as a value additive for Hot melts or in plastic proc...展开 SARAWAX SX 105 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a drop point of 114-120 °C. The product can be used as a value additive for Hot melts or in plastic processing. SARAWAX are only available from Evonik in Europe, South America, Middle East, North Africa and India. 收起 | Request Sample |
| SARAWAX SX 80 | Evonik Operations GmbH, BL Coating & Adhesive Resins | SARAWAX SX 80 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a low congealing point of 81-86 °C. The SARAWAX SX 80 shows high crystallinity and a extremely low molecu...展开 SARAWAX SX 80 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a low congealing point of 81-86 °C. The SARAWAX SX 80 shows high crystallinity and a extremely low molecular weight distribution. Applications include amongst others Hot melts especially for food packaging. The product is compliant to FDA and EU 10/2011 without specific migration limit. SARAWAX are only available from Evonik in Europe, South America, Middle East, North Africa and India. 收起 | Request Sample |
| SG-Si 151 | Nanjing Shuguang Chemical Group | SG-Si 151, in the form of a colorless to pale yellow clear liquid, is an ethoxylated vinyl silane coupling agent. This product can be used to cross-link adhesives and in special coating materials. It can also crosslink polyethylene and dip treat fibergl...展开 SG-Si 151, in the form of a colorless to pale yellow clear liquid, is an ethoxylated vinyl silane coupling agent. This product can be used to cross-link adhesives and in special coating materials. It can also crosslink polyethylene and dip treat fiberglass or inorganic siliceous fibers. 收起 | |
| SG-Ti 502 | Nanjing Shuguang Chemical Group | SG-Ti 502, in the form of a clear to slightly hazy, colorless to light yellow aqueous liquid, is a titanate coupling agent. This product improves the cross-linking performance for water-borne paints and adhesives. It also makes paint form hard and gloss...展开 SG-Ti 502, in the form of a clear to slightly hazy, colorless to light yellow aqueous liquid, is a titanate coupling agent. This product improves the cross-linking performance for water-borne paints and adhesives. It also makes paint form hard and glossy surfaces on glass, metal, filler, and pigments. 收起 | |
| SG-Zr 802 | Nanjing Shuguang Chemical Group | SG-Zr 802, in the form of a yellowish to brown organic liquid, is a zirconate coupling agent. This product can be used in adhesives and printing inks as a catalyst for cross-linking resins, which improves the binding force and adhesion to the substrate s...展开 SG-Zr 802, in the form of a yellowish to brown organic liquid, is a zirconate coupling agent. This product can be used in adhesives and printing inks as a catalyst for cross-linking resins, which improves the binding force and adhesion to the substrate surface. It can also be used in the electronic industry as a surface treatment for inorganic minerals to improve the dielectric properties of the composites. 收起 | |
| Silane Coupling Agent ELT-S 550 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of ad...展开 Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of adhesives and coatings. 收起 | |
| Silane Coupling Agent ELT-S 551 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in ad...展开 Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in adhesives and coatings. 收起 | |
| Silane Coupling Agent ELT-S 602 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an a...展开 Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an adhesion promoter in adhesives and sealants. 收起 | |
| Silane Coupling Agent ELT-S 792 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 ...展开 Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 acts as an adhesion promoter in PVC-based sealants. 收起 | |
| Silicon Dioxide GJ-103 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase th...展开 Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide JLJ-105 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is...展开 Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide NY-102 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bondin...展开 Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide SP-106 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is a...展开 Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide TL-104 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase m...展开 Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide XJ-100 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide XJ-100 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. | |
| Silicon Dioxide XJ-101 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide XJ-101 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. | |
| Silicon Dioxide ZZ-108 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide ZZ-108 is a transparent white powder that has high bulkiness and water-solubility properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength, and it is also used in paints and coatings. | |
| VESTOPLAST® 206 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 206是一种硅烷改性聚α-烯烃。应用领域：用于生产活性、潮气固化热熔胶和封闭剂的原材料。特别适合黏结塑料(尤其是PP)及玻璃。 | Request Sample |
| VESTOPLAST® 308 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 308是一种功能化的产品。应用领域：生产黏结金属和极性基材的热熔胶的原材料。 | Request Sample |
| VESTOPLAST® 408 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 408是一种较硬等级的产品，在负载的情况下具有出色的热稳定性和撕裂强度。应用领域：生产织物、纸张和包装工业用热熔胶的原材料。 | Request Sample |
| VESTOPLAST® 508 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 508是一种低黏度、长开放时间、低软化温度的产品。应用领域：生产卫生行业用热熔胶及床垫的原材料。 | Request Sample |
| VESTOPLAST® 520 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 520是一种较高黏度、长开放时间、低软化温度的产品。应用领域：生产电缆填充化合物的原材料。 | Request Sample |
| VESTOPLAST® 608 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 608具有高软化温度及相对较低的熔化黏度。应用领域：生产纸张和包装工业用的热熔胶原材料。 | Request Sample |
| VESTOPLAST® 703 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 703是一种低熔化黏度和短开放时间的产品。应用领域：生产包装和电子工业用热熔胶，以及纤维和地毯中丝线固定剂的原材料。 | Request Sample |
| VESTOPLAST® 704 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 704是一种柔软级的产品，开放时间相对较短。应用领域：生产用于卫生行业的可喷涂热熔胶，以及商标和密封合成物的原材料。 | Request Sample |
| VESTOPLAST® 708 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 708是一种相对较软的产品，低熔化黏度、负载的情况下良好的热稳定性。应用领域：生产卫生、纸张和包装工业用热熔胶，以及纤维和地毯中丝线固定剂的原材料。 | Request Sample |
| VESTOPLAST® 750 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 750具有良好的撕裂强度和裂口延展性，相对较低的软化温度。应用领域：生产卫生和木工行业热熔胶的原材料。 | Request Sample |
| VESTOPLAST® 751 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 751 is a high viscosity product with a medium softening point. This product can be used as a raw material for various applications such as automotive. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: ...展开 VESTOPLAST® 751 is a high viscosity product with a medium softening point. This product can be used as a raw material for various applications such as automotive. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. 收起 | Request Sample |
| VESTOPLAST® 792 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 792是一种高黏度等级、良好撕裂强度和裂口延展性的产品。应用领域：生产家具工业热熔胶的原材料。 | Request Sample |
| VESTOPLAST® 828 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 828显示了在负载荷情况下良好的热稳定性以及相对较短的开放时间。应用领域：生产聚合物改性沥青的原材料，用于屋顶和桥梁；用于木工行业的热熔胶；PP接口与利乐包(包装工业)之间黏结的热熔胶, 用于地毯、瓷砖和预成型汽车地毯的重型涂料化合物。 | Request Sample |
| VESTOPLAST® 888 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 888是一种高黏度的产品，具有在负载荷情况下良好的热稳定性以及相对较短的开放时间。应用领域：生产聚合物改性沥青的原材料，用于屋顶和桥梁；用于木工行业的热熔胶。 | Request Sample |
| VESTOPLAST® 891 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 891是一种高黏度的产品，具有在负载荷情况下良好的热稳定性以及相对较短的开放时间。应用领域：生产聚合物改性沥青的原材料，用于屋顶和桥梁；用于木工行业的热熔胶。 | Request Sample |
| VESTOPLAST® EP 807 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP 807 is a low viscosity product with a high softening point and high shear adhesion failure temperature. This product can be used as a raw material for various applications amongst others automotive and packaging. By adding VESTOPLAST® EP 80...展开 VESTOPLAST® EP 807 is a low viscosity product with a high softening point and high shear adhesion failure temperature. This product can be used as a raw material for various applications amongst others automotive and packaging. By adding VESTOPLAST® EP 807 the adhesion to e.g. PP can be improved. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. 收起 | Request Sample |
| VESTOPLAST® EP V2094 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP V2094 is a low viscosity product with a an excellent hot tack and adhesion to various substrates such as PP, PE and foams.This product can be used as a raw material for various low viscosity applications especially hygiene and matresses. Lo...展开 VESTOPLAST® EP V2094 is a low viscosity product with a an excellent hot tack and adhesion to various substrates such as PP, PE and foams.This product can be used as a raw material for various low viscosity applications especially hygiene and matresses. Low process temperatures are possible with heat stability still remaining high. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. 收起 | Request Sample |
| VESTOPLAST® EP V2103 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP V2103 is a low viscosity product with a high shear adhesion failure temperature and a medium to high softening point. This product can be used as a raw material for various low viscosity applications especially packaging. In formulations, t...展开 VESTOPLAST® EP V2103 is a low viscosity product with a high shear adhesion failure temperature and a medium to high softening point. This product can be used as a raw material for various low viscosity applications especially packaging. In formulations, the polymer shows a very short setting time which enables for fast production processes. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. 收起 | Request Sample |
| VESTOPLAST® S | Evonik Operations GmbH, BL Coating & Adhesive Resins | 用于制造道路建设用聚合物改性沥青的原材料。 | Request Sample |
| VESTOPLAST® SR | Evonik Operations GmbH, BL Coating & Adhesive Resins | 用于制造道路建设用聚合物改性沥青的原材料。 | Request Sample |
| VESTOWAX® C 20 Flakes/Micro prills | Evonik Operations GmbH, BL Coating & Adhesive Resins | 氧化费-托蜡。 | Request Sample |
| VESTOWAX® C 60 Powder | Evonik Operations GmbH, BL Coating & Adhesive Resins | 氧化费-托蜡。 | Request Sample |
| VESTOWAX® C 60 Prills | Evonik Operations GmbH, BL Coating & Adhesive Resins | 氧化费-托蜡。 | Request Sample |
| VESTOWAX® C40 Micro prills | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® C40 is a Fischer-Tropsch wax oxidate with an acid number of 24-27 mg KOH/g | Request Sample |
| VESTOWAX® EH 100 Pellets | Evonik Operations GmbH, BL Coating & Adhesive Resins | 非功能化费-托硬石蜡。 | Request Sample |
| VESTOWAX® FM 1012 | Evonik Operations GmbH, BL Coating & Adhesive Resins | 微粉化费-托/PFTE蜡。 | Request Sample |
| VESTOWAX® H 2050 MG | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® H 2050 MG is a non-functionalised Fischer-Tropsch hard paraffin. | Request Sample |
| VESTOWAX® SH 105 Pellets | Evonik Operations GmbH, BL Coating & Adhesive Resins | 非功能化费-托硬石蜡。 | Request Sample |
| VESTOWAX® SH 105 Powder | Evonik Operations GmbH, BL Coating & Adhesive Resins | 非功能化费-托硬石蜡。 | Request Sample |
| VESTOWAX® SH 112 | Evonik Operations GmbH, BL Coating & Adhesive Resins | 微粉化费-托硬蜡。 | Request Sample |
| Vinyl Polymer Resin (VAH) ELT-VAAL | Anhui Elite Industrial Co., Ltd | Vinyl Polymer Resin (VAH) ELT-VAAL is a white or slight yellow powder which has a high molecular weight. This product has a molecular weight of 25000 and is also crosslinkable with amino resins, polyisocyanates, and other generic resins. This product pr...展开 Vinyl Polymer Resin (VAH) ELT-VAAL is a white or slight yellow powder which has a high molecular weight. This product has a molecular weight of 25000 and is also crosslinkable with amino resins, polyisocyanates, and other generic resins. This product provides blocking resistance, sand-ability, adhesion, and resistance to paint, coatings, adhesives, and inks. 收起 | |
| Vinyl Polymer Resin VAM Resin | Anhui Elite Industrial Co., Ltd | Vinyl Polymer Resin VAM Resin is a white powder with a high molecular weight. This product has a viscosity between 40 and 48 and is also approved for food contact applications by the FDA. Vinyl Polymer Resin VAM Resin provides flexibility and adhesion to...展开 Vinyl Polymer Resin VAM Resin is a white powder with a high molecular weight. This product has a viscosity between 40 and 48 and is also approved for food contact applications by the FDA. Vinyl Polymer Resin VAM Resin provides flexibility and adhesion to paint, coatings, adhesives, and inks. 收起 | |
| WeKcelo™ ME | Yangzhou WeiKem Chemical Co., Ltd. (Joyvo New Material Co., Ltd i) | WeKcelo™ ME is methyl hydroxyethyl cellulose that is a non-ionic cellulose derivative that dissolves easily in either hot or cold water. It is applicable in the coating, adhesive, paper, and textile industries. | |
| ASC Automatic Sample Changer | Anton Paar Viscosity & Rheology | 该ASC样品自动进样系统可一次同时全自动测量32个样品，包括测量系统的清洗。可按照实验室质量和精度进行质量控制和全流变学分析。 |  |
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | 日常生活中所使用的材料，如玻璃和金属，是在超过1000 °C的条件下处理或精炼熔化的。为了确保最终产品的始终一致的高品质以及优化能源密集型的过程，懂得熔体粘度是非常重要的。该熔炉流变仪系统(FRS 1600)结合流变仪和实验室火炉可测量超过1600 °C。 |  |
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | HTR是第一台全自动流变仪。流变学测量是由高质量的MCR流变仪完成的，同时由一个机器人控制所有其他项目的测量。 |  |
| Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME是一款滚球式粘度计，通过透明或不透明的液体根据Hoepple的落球原则计算球的滚动时间。该方法只需要400微升的液体。结果可通过运动学粘度和动力学粘度呈现。该粘度计简洁经济，可节省实验室的空间。是Anton Paar’s AMVn自动粘度计的更新版本。 |  |
| MCR Rheometer Series | Anton Paar Viscosity & Rheology | 该新的MCR流变仪拥有最新的技术。EC运动技术，低摩擦的轴承以及专利的正交力传感器经过多年的优化可满足最高的流变要求。任何类型的或组合的流变测试，转动或振动模式，都可用MCR流变仪测量。该系统的模块化设计，可适合宽广的温度范围的装置和特定程序的应用。 |  |
| RheoLabQC Quality Control Rheometer | Anton Paar Viscosity & Rheology | RheolabQC 是一款迄今最先进的质量控制流变仪，也可用于研发。结合了无与伦比的性能，易于操作以及稳健设计于一身。可执行从单点快速检查流动曲线到屈服点确定等一系列复杂的流变控制。 |  |
| Rheometer Measuring Head | Anton Paar Viscosity & Rheology | 具有MCR流变仪性能的自定义流变测量仪器。其流变测量头可用于自动化操作或超过实验室流变仪要求的其他特殊测量目的。是工艺联合或建立自定义流变仪系统的完美方案。该模块装置包含一个配备有知名马达的测量头以及MCR系列的空气轴承，还有一个单独的控制单元。 |  |
| RheoPlus Rheometer Software | Anton Paar Viscosity & Rheology | 易于使用，灵活且功能强大 - RheoPlus软件用于所有Anton Paar流变仪，从质量控制仪器到高通量的流变仪。不同用户可轻松切换方法模块以及测量数据。该迄今为止最先进的软件可提供大量的模板，自动测量以及在RheoManager上处理数据，一个LIM/SAP界面，和21 CFR 的11章的兼容。 |  |
