| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起 | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| K-FLEX® 500 Plasticizer | LANXESS (former Emerald Performance Materials) | K-FLEX® 500 is a classic blend of traditional dibenzoate plasticizers that optimizes the excellent performance of K-FLEX DP with improved handling, due to its low freeze point. It is an excellent choice for use in hot melt adhesives, water-based latex adh...展开 K-FLEX® 500 is a classic blend of traditional dibenzoate plasticizers that optimizes the excellent performance of K-FLEX DP with improved handling, due to its low freeze point. It is an excellent choice for use in hot melt adhesives, water-based latex adhesives, and latex caulks. Emerald Kalama Chemical was acquired by LANXESS in 2021. 收起 | |
| K-FLEX® 850P Plasticizer | LANXESS (former Emerald Performance Materials) | K-FLEX® 850P is a blend of dibenzoate plasticizers similar in composition to K-FLEX® 850S (DEGDB rich) that is designed for both vinyl and waterborne latex applications. Emerald Kalama Chemical was acquired by LANXESS in 2021. | |
| K-FLEX® 850S Plasticizer | LANXESS (former Emerald Performance Materials) | K-FLEX® 850S is optimized for performance, compatibility, and economy in waterborne latex applications. It is a very effective for waterborne adhesives, as well as hot melt adhesives and putty. With FDA approvals for direct food contact, it is a viable op...展开 K-FLEX® 850S is optimized for performance, compatibility, and economy in waterborne latex applications. It is a very effective for waterborne adhesives, as well as hot melt adhesives and putty. With FDA approvals for direct food contact, it is a viable option for food packaging adhesives. In both VAE an PVAc emulsions, K-FLEX 850S provides excellent performance properties, such as wet tack, extended open times, chalk point/Tg suppression, reduced set times, and strong viscosity response of the base emulsion to the plasticizer (demonstrating compatibility and allowing flexibility). Emerald Kalama Chemical was acquired by LANXESS in 2021. 收起 | |
| K-FLEX® 975P Plasticizer | LANXESS (former Emerald Performance Materials) | K-FLEX® 975P is economical to use and designed to offer a broad range of compatibility with polar polymers, with improved handling due to its lower freeze point. It improves elastomeric and adhesion characteristics, demonstrating strong viscosity response...展开 K-FLEX® 975P is economical to use and designed to offer a broad range of compatibility with polar polymers, with improved handling due to its lower freeze point. It improves elastomeric and adhesion characteristics, demonstrating strong viscosity response of the base emulsion to the plasticizer (demonstrating compatibility and allowing flexibility). It also improves wet tack, suppresses Tg, extends open times, and reduces set times in adhesives. Emerald Kalama Chemical was acquired by LANXESS in 2021. 收起 | |
| K-FLEX® DP Plasticizer | LANXESS (former Emerald Performance Materials) | K-FLEX® DP is a non-phthalate, dibenzoate plasticizer, which achieves excellent performance and compatibility in waterborne adhesives, latex caulks, and reactive sealants, including acrylic, VAE, PVAc, STPE, and STPU types chemistries, food contact adhesi...展开 K-FLEX® DP is a non-phthalate, dibenzoate plasticizer, which achieves excellent performance and compatibility in waterborne adhesives, latex caulks, and reactive sealants, including acrylic, VAE, PVAc, STPE, and STPU types chemistries, food contact adhesives, and pressure sensitive adhesives. Benefits include good flexibility, viscosity response, and adhesion (even to challenging substrates), extended open times, reduced set times, improved wet tack, and enhanced weatherability. In adhesives applications, such as putty and water-based latex adhesives, K-FLEX DP is an effective, low-VOC choice. It also offers easier handling due to its extremely low freeze point. Emerald Kalama Chemical was acquired by LANXESS in 2021. 收起 | |
| K-FLEX® PG Plasticizer | LANXESS (former Emerald Performance Materials) | K-FLEX® PG is a non-phthalate, dibenzoate plasticizer, which achieves excellent performance and compatibility in waterborne adhesives, latex caulks, and reactive sealants, including acrylic, VAE, PVAc, STPE, and STPU types chemistries, food contact adhesi...展开 K-FLEX® PG is a non-phthalate, dibenzoate plasticizer, which achieves excellent performance and compatibility in waterborne adhesives, latex caulks, and reactive sealants, including acrylic, VAE, PVAc, STPE, and STPU types chemistries, food contact adhesives, and pressure sensitive adhesives. Benefits include good flexibility, viscosity response, and adhesion (even to challenging substrates), extended open times, reduced set times, improved wet tack, and enhanced weatherability. K-FLEX PG offers an excellent chemistry and regulatory profile and has no GHS label requirements in the U.S. and Europe. Like K-FLEX DP, K-FLEX PG has an extremely low freeze point, which results in easier handling. However, K-FLEX PG offers improved economy. It can be used at higher loading levels in waterborne adhesives without degrading performance. Ask LANXESS for more information about this product’s applicability to EU Ecolabel claims. Emerald Kalama Chemical was acquired by LANXESS in 2021. 收起 | |
| Kalama® Benzyl Alcohol | LANXESS (former Emerald Performance Materials) | Kalama® Benzyl Alcohol is a cosolvent for cellulose acetate and nitro cellulose. It is available in technical, FCC, and parenteral grades. All grades are produced using the highest standards for quality and sustainability, including ISO 9001:2015 and ISO...展开 Kalama® Benzyl Alcohol is a cosolvent for cellulose acetate and nitro cellulose. It is available in technical, FCC, and parenteral grades. All grades are produced using the highest standards for quality and sustainability, including ISO 9001:2015 and ISO 14001:2015. Emerald Kalama Chemical was acquired by LANXESS in 2021. 收起 | |
| Kalama® Benzyl Alcohol NF/FCC | LANXESS (former Emerald Performance Materials) | Kalama® Benzyl Alcohol is a cosolvent for cellulose acetate and nitro cellulose. It is available in technical, FCC, and parenteral grades. All grades are produced using the highest standards for quality and sustainability, including ISO 9001:2015 and ISO...展开 Kalama® Benzyl Alcohol is a cosolvent for cellulose acetate and nitro cellulose. It is available in technical, FCC, and parenteral grades. All grades are produced using the highest standards for quality and sustainability, including ISO 9001:2015 and ISO 14001:2015. Emerald Kalama Chemical was acquired by LANXESS in 2021. 收起 | |
| Silicon Dioxide GJ-103 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase th...展开 Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide JLJ-105 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is...展开 Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide NY-102 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bondin...展开 Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide SP-106 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is a...展开 Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide TL-104 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase m...展开 Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide XJ-100 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide XJ-100 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. | |
| Silicon Dioxide XJ-101 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide XJ-101 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. | |
| Silicon Dioxide ZZ-108 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide ZZ-108 is a transparent white powder that has high bulkiness and water-solubility properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength, and it is also used in paints and coatings. |
