| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展开 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起 | |
| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...展开 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. 收起 | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展开 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起 | |
| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展开 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展开 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-117 | DCC (Dairen Chemical Corp.) | DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展开 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起 | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展开 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展开 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展开 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起 | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起 | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起 | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起 | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起 | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展开 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起 | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展开 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起 | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...展开 DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. 收起 | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展开 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起 | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展开 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起 | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...展开 DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. 收起 | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...展开 DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. 收起 | |
| DA-371 | DCC (Dairen Chemical Corp.) | DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...展开 DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. 收起 | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...展开 DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...展开 DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...展开 DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. 收起 | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....展开 DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-691 | DCC (Dairen Chemical Corp.) | DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...展开 DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. 收起 | |
| DA-901 | DCC (Dairen Chemical Corp.) | DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...展开 DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. 收起 | |
| DA-908 | DCC (Dairen Chemical Corp.) | DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...展开 DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. 收起 | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...展开 DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起 | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| n-Propanol | DCC (Dairen Chemical Corp.) | n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether...展开 n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether. n-Propanol is used in solvents, as an intermediate chemical for synthesis, industrial coatings, adhesives, and printing inks. 收起 | |
| Propylene Carbonate | Linyi Lixing Chemical Co., Ltd. | Propylene Carbonate is a clear transparent liquid. This product finds application as an additive in paint strippers and as a setting agent in chemical grouting to control gel time. | |
| Silicon Dioxide GJ-103 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase th...展开 Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide JLJ-105 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is...展开 Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide NY-102 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bondin...展开 Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide SP-106 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is a...展开 Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide TL-104 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase m...展开 Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide XJ-100 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide XJ-100 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. | |
| Silicon Dioxide XJ-101 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide XJ-101 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. | |
| Silicon Dioxide ZZ-108 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide ZZ-108 is a transparent white powder that has high bulkiness and water-solubility properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength, and it is also used in paints and coatings. | |
| Vinyl Acetate Monomer | DCC (Dairen Chemical Corp.) | Vinyl Acetate Monomer (VAM) is an active, colorless, and liquid phase chemical, produced by the vapor phase reaction of Ethylene, Acetic Acid, and Oxygen over a catalyst. It is stabilized with a hydroquinone inhibitor so that it can be put in storage. VAM...展开 Vinyl Acetate Monomer (VAM) is an active, colorless, and liquid phase chemical, produced by the vapor phase reaction of Ethylene, Acetic Acid, and Oxygen over a catalyst. It is stabilized with a hydroquinone inhibitor so that it can be put in storage. VAM can be used in many different applications. Vinyl Acetate Monomer is used in polyvinyl acetate as an adhesive for paper, wood, non-woven fabrics, rug backing, and as a material in paint. It is used in polyvinyl alcohol as a laminating adhesive, and in emulsifying agents and films. VAM is used in vinyl acetate-vinyl chloride copolymers as packaging film, adhesives, paints, and paper coatings. In ethylene-vinyl acetate-vinyl chloride terpolymer it is used as an adhesive with water resistance and fire retardant characteristics. 收起 | |
| ASC Automatic Sample Changer | Anton Paar Viscosity & Rheology | 该ASC样品自动进样系统可一次同时全自动测量32个样品，包括测量系统的清洗。可按照实验室质量和精度进行质量控制和全流变学分析。 |  |
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | 日常生活中所使用的材料，如玻璃和金属，是在超过1000 °C的条件下处理或精炼熔化的。为了确保最终产品的始终一致的高品质以及优化能源密集型的过程，懂得熔体粘度是非常重要的。该熔炉流变仪系统(FRS 1600)结合流变仪和实验室火炉可测量超过1600 °C。 |  |
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | HTR是第一台全自动流变仪。流变学测量是由高质量的MCR流变仪完成的，同时由一个机器人控制所有其他项目的测量。 |  |
| Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME是一款滚球式粘度计，通过透明或不透明的液体根据Hoepple的落球原则计算球的滚动时间。该方法只需要400微升的液体。结果可通过运动学粘度和动力学粘度呈现。该粘度计简洁经济，可节省实验室的空间。是Anton Paar’s AMVn自动粘度计的更新版本。 |  |
| MCR Rheometer Series | Anton Paar Viscosity & Rheology | 该新的MCR流变仪拥有最新的技术。EC运动技术，低摩擦的轴承以及专利的正交力传感器经过多年的优化可满足最高的流变要求。任何类型的或组合的流变测试，转动或振动模式，都可用MCR流变仪测量。该系统的模块化设计，可适合宽广的温度范围的装置和特定程序的应用。 |  |
| RheoLabQC Quality Control Rheometer | Anton Paar Viscosity & Rheology | RheolabQC 是一款迄今最先进的质量控制流变仪，也可用于研发。结合了无与伦比的性能，易于操作以及稳健设计于一身。可执行从单点快速检查流动曲线到屈服点确定等一系列复杂的流变控制。 |  |
| Rheometer Measuring Head | Anton Paar Viscosity & Rheology | 具有MCR流变仪性能的自定义流变测量仪器。其流变测量头可用于自动化操作或超过实验室流变仪要求的其他特殊测量目的。是工艺联合或建立自定义流变仪系统的完美方案。该模块装置包含一个配备有知名马达的测量头以及MCR系列的空气轴承，还有一个单独的控制单元。 |  |
| RheoPlus Rheometer Software | Anton Paar Viscosity & Rheology | 易于使用，灵活且功能强大 - RheoPlus软件用于所有Anton Paar流变仪，从质量控制仪器到高通量的流变仪。不同用户可轻松切换方法模块以及测量数据。该迄今为止最先进的软件可提供大量的模板，自动测量以及在RheoManager上处理数据，一个LIM/SAP界面，和21 CFR 的11章的兼容。 |  |
