| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展开 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起 | |
| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...展开 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. 收起 | |
| A65 Polyethylene Wax | Changxing Xiehe Polymer Co., Ltd. | A65 Polyethylene Wax is produced by pyrolysis polyethylene and can be used to provide excellent lubrication and good dispersibility. A65 is widely used in the production of plastics，pigments and masterbatches. It is used extensively in the metal, construc...展开 A65 Polyethylene Wax is produced by pyrolysis polyethylene and can be used to provide excellent lubrication and good dispersibility. A65 is widely used in the production of plastics，pigments and masterbatches. It is used extensively in the metal, construction, and paper industries, ect. A65 can be used to provide excellent external and internal lubrication in most plastic processes. 收起 | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展开 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起 | |
| Anti-foam Agent BLK-6618 | BELIKE Chemical Co.,Ltd. | Anti-foam Agent BLK-6618 is a coating additive that is in the form of a white liquid. This product is most commonly used as a defoamer in water-based printing paste, paper coatings, and adhesives. | |
| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展开 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展开 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-117 | DCC (Dairen Chemical Corp.) | DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展开 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起 | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展开 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展开 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展开 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起 | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起 | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起 | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起 | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起 | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展开 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起 | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展开 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起 | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...展开 DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. 收起 | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展开 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起 | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展开 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起 | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...展开 DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. 收起 | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...展开 DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. 收起 | |
| DA-371 | DCC (Dairen Chemical Corp.) | DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...展开 DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. 收起 | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...展开 DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...展开 DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...展开 DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. 收起 | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....展开 DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-691 | DCC (Dairen Chemical Corp.) | DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...展开 DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. 收起 | |
| DA-901 | DCC (Dairen Chemical Corp.) | DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...展开 DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. 收起 | |
| DA-908 | DCC (Dairen Chemical Corp.) | DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...展开 DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. 收起 | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...展开 DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| Epotec® RD 103 | Aditya Birla | Epotec® RD 103 is a low viscosity, aliphatic di-epoxide compound based on 1,4-butane diol. It is a reactive diluent for high viscosity epoxy resins. This product is well suited for use in structural adhesives and coatings for filament winding, lamination,...展开 Epotec® RD 103 is a low viscosity, aliphatic di-epoxide compound based on 1,4-butane diol. It is a reactive diluent for high viscosity epoxy resins. This product is well suited for use in structural adhesives and coatings for filament winding, lamination, electronic encapsulation, and other industrial applications. 收起 | |
| Epotec® RD 104 | Aditya Birla | Epotec® RD 104 is a mono-functional, phenol-based glycidyl ether, primarily used for reducing the viscosity of conventional epoxy resins. This product is ideal for use in adhesives and casting, flooring, and construction applications. | |
| Epotec® RD 105 | Aditya Birla | Epotec® RD 105 is a mono-functional, o-Cresol-based reactive diluent primarily used for reducing the viscosity of conventional epoxy resins. It features excellent retention of mechanical and chemical resistance properties, with no influence on reactivity....展开 Epotec® RD 105 is a mono-functional, o-Cresol-based reactive diluent primarily used for reducing the viscosity of conventional epoxy resins. It features excellent retention of mechanical and chemical resistance properties, with no influence on reactivity. This product is ideal for use in adhesives and flooring, casting, & construction coatings. 收起 | |
| Epotec® RD 106 | Aditya Birla | Epotec® RD 106 is an aromatic, mono-functional, p-tertiary butyl phenol-based reactive diluent. It features a combination of good electrical properties, low viscosity, low volatility, and low odor level. This product is ideal for use in coatings, adhesive...展开 Epotec® RD 106 is an aromatic, mono-functional, p-tertiary butyl phenol-based reactive diluent. It features a combination of good electrical properties, low viscosity, low volatility, and low odor level. This product is ideal for use in coatings, adhesives, laminates, and flooring applications. 收起 | |
| Epotec® RD 107 | Aditya Birla | Epotec® RD 107 is a low viscosity, aliphatic di-epoxide compound based on 1,6-hexanediol, designed for use as a reactive diluent for high viscosity epoxy resins. It helps to improve toughness and retain chemical resistance in final formulations. This prod...展开 Epotec® RD 107 is a low viscosity, aliphatic di-epoxide compound based on 1,6-hexanediol, designed for use as a reactive diluent for high viscosity epoxy resins. It helps to improve toughness and retain chemical resistance in final formulations. This product is ideal for use in structural adhesives, coatings, and filament winding, lamination, & electronic encapsulation applications. 收起 | |
| Epotec® RD 108 | Aditya Birla | Epotec® RD 108 is a mono-glycidyl ether of C12-C14 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. It features improved non-yellowing characteristics, excellent wetting properties, and low odor. This product is ideal f...展开 Epotec® RD 108 is a mono-glycidyl ether of C12-C14 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. It features improved non-yellowing characteristics, excellent wetting properties, and low odor. This product is ideal for use in self-leveling flooring & screed applications, metal and concrete primers & coatings, and general purpose adhesives. 收起 | |
| Epotec® RD 109 | Aditya Birla | Epotec® RD 109 is a mono-glycidyl ether of C12-C13 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in self-leveling flooring applications, general purpose coatings, and general purpose adh...展开 Epotec® RD 109 is a mono-glycidyl ether of C12-C13 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in self-leveling flooring applications, general purpose coatings, and general purpose adhesives. 收起 | |
| Epotec® RD 110 | Aditya Birla | Epotec® RD 110 is a mono-glycidyl ether of 2-ethyl hexanol, primarily used as a reactive diluent for high viscosity epoxy resins. It features very low viscosity and exceptional dilution efficiency. This product is ideal for use in flooring applications, c...展开 Epotec® RD 110 is a mono-glycidyl ether of 2-ethyl hexanol, primarily used as a reactive diluent for high viscosity epoxy resins. It features very low viscosity and exceptional dilution efficiency. This product is ideal for use in flooring applications, coatings, and general purpose adhesives. 收起 | |
| Epotec® RD 113 | Aditya Birla | Epotec® RD 113 is a low viscosity, trifunctional epoxy reactive diluent based on trimethylol propane. It features good cross-link density, which helps improve chemical resistance in formulations based on conventional BPA epoxy resins. This product is idea...展开 Epotec® RD 113 is a low viscosity, trifunctional epoxy reactive diluent based on trimethylol propane. It features good cross-link density, which helps improve chemical resistance in formulations based on conventional BPA epoxy resins. This product is ideal for chemical resistant coatings, fast setting adhesives & sealants, tank linings, abrasion resistant castings, and encapsulation & other electronic applications. 收起 | |
| Epotec® RD 114LE | Aditya Birla | Epotec® RD 114LE is a diglycidyl ether of neopentyl glycol, designed primarily as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in coatings and adhesives. | |
| Epotec® RD 119LE | Aditya Birla | Epotec® RD 119LE is a diglycidyl ether of polypropylene glycol which, when blended with conventional epoxy resins, improves flexibility, increases elongation, improves impact resistance, and reduces viscosity. This product is ideal for use in automotive c...展开 Epotec® RD 119LE is a diglycidyl ether of polypropylene glycol which, when blended with conventional epoxy resins, improves flexibility, increases elongation, improves impact resistance, and reduces viscosity. This product is ideal for use in automotive coatings & adhesives, tank linings, coil coatings, and flooring applications. 收起 | |
| Epotec® RD 121 | Aditya Birla | Epotec® RD 121 is a low color di-epoxide, based on dipropylene glycol, which improves flexibility and impact strength and increases elongation in cured systems. This product is ideal for use in adhesives and protective and marine coatings. | |
| Epotec® TH 7202 | Aditya Birla | Epotec® TH 7202 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it features good chemical resistance and can be used alone or as an accelerator for other curing agents. This ...展开 Epotec® TH 7202 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it features good chemical resistance and can be used alone or as an accelerator for other curing agents. This product is ideal for use in fast setting adhesives and gel coats. 收起 | |
| Epotec® TH 7207 | Aditya Birla | Epotec® TH 7207 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It features high reactivity even at low temperatures, rapid development of physical strength, and good compatibility & accelerator fun...展开 Epotec® TH 7207 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It features high reactivity even at low temperatures, rapid development of physical strength, and good compatibility & accelerator functionality with other polyamine curing agents. This product is ideal for use in chemical resistant coatings and rapid setting adhesives. 收起 | |
| Epotec® TH 7210 | Aditya Birla | Epotec® TH 7210 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it yields good chemical resistance and can be used alone or as an accelerator for other curing agent...展开 Epotec® TH 7210 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it yields good chemical resistance and can be used alone or as an accelerator for other curing agents. This product is ideal for use in solvent-free coatings and fast setting adhesives. 收起 | |
| Epotec® TH 7211 | Aditya Birla | Epotec® TH 7211 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It yields systems with long working times, excellent resistance to carbonation, and outstanding gloss, clarity, & toughness. This prod...展开 Epotec® TH 7211 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It yields systems with long working times, excellent resistance to carbonation, and outstanding gloss, clarity, & toughness. This product is ideal for use in high solids & solvent-free coatings, adhesives, and floor toppings. 收起 | |
| Epotec® TH 7212 | Aditya Birla | Epotec® TH 7212 is a very low viscosity, modified aliphatic amine curing agent featuring good impact resistance, high reactivity, and good penetration in smaller cracks. This product is ideal for use in crack injection systems, adhesives, castings, and hi...展开 Epotec® TH 7212 is a very low viscosity, modified aliphatic amine curing agent featuring good impact resistance, high reactivity, and good penetration in smaller cracks. This product is ideal for use in crack injection systems, adhesives, castings, and high solids, low VOC, & solvent-free coatings. 收起 | |
| Epotec® TH 7903 | Aditya Birla | Epotec® TH 7903 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product...展开 Epotec® TH 7903 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product is ideal for use in chemical resistant coatings, adhesives, and concrete bonding compounds. 收起 | |
| Epotec® TH 7905 | Aditya Birla | Epotec® TH 7905 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product...展开 Epotec® TH 7905 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product is ideal for use in chemical resistant coatings, adhesives, and concrete bonding compounds. 收起 | |
| Epotec® TW 5001 | Aditya Birla | Epotec® TW 5001 is an aqueous dispersion of liquid bisphenol-A epoxy resin with moderate viscosity. It is completely water reducible, contains no organic solvents, and includes an internal emulsifier for improved stability and reduced water sensitivity. T...展开 Epotec® TW 5001 is an aqueous dispersion of liquid bisphenol-A epoxy resin with moderate viscosity. It is completely water reducible, contains no organic solvents, and includes an internal emulsifier for improved stability and reduced water sensitivity. This product is ideal for use in fiber sizing applications, protective coatings for steel & concrete, and adhesives. 收起 | |
| Epotec® TW 5002 | Aditya Birla | Epotec® TW 5002 is an aqueous dispersion of type-1 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improve...展开 Epotec® TW 5002 is an aqueous dispersion of type-1 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improved stability & reduced water sensitivity. This product is ideal for use in fiber sizing applications, protective coatings for steel & concrete, adhesives, and textile binders. 收起 | |
| Epotec® TW 5003H | Aditya Birla | Epotec® TW 5003H is an aqueous dispersion of type-7 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improv...展开 Epotec® TW 5003H is an aqueous dispersion of type-7 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improved stability & reduced water sensitivity. This product is ideal for use in protective coatings for steel & concrete, adhesives, fiber sizing applications, and textile binders. 收起 | |
| Epotec® TW 5004 | Aditya Birla | Epotec® TW 5004 is an aqueous dispersion of standard Bisphenol F/A epoxy resin featuring moderate viscosity and 60% nonvolatile content. This product is well-suited for various applications in different temperature environments - including textile binders...展开 Epotec® TW 5004 is an aqueous dispersion of standard Bisphenol F/A epoxy resin featuring moderate viscosity and 60% nonvolatile content. This product is well-suited for various applications in different temperature environments - including textile binders, coatings, and adhesives. 收起 | |
| Epotec® YD 011X-75 | Aditya Birla | Epotec® YD 011X-75 is a solution of unmodified, low molecular weight, bisphenol-A resin-based solid diglycidyl ether in xylene. When applied to coating formulations, it delivers improved flexibility and drying characteristics. This product is ideal for us...展开 Epotec® YD 011X-75 is a solution of unmodified, low molecular weight, bisphenol-A resin-based solid diglycidyl ether in xylene. When applied to coating formulations, it delivers improved flexibility and drying characteristics. This product is ideal for use in solvent-based anti-corrosive coatings, marine paints, industrial paints, adhesives, and laminates. 收起 | |
| Epotec® YD 012 X 75 | Aditya Birla | Epotec® YD 012 X 75 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved in xylene. This product is mainly used in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. | |
| Epotec® YD 126 | Aditya Birla | Epotec® YD 126 is an unmodified, low viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. Lower viscosity allows for the production of solvent-free and high solids coatings without or with minimal use of diluents. This product is id...展开 Epotec® YD 126 is an unmodified, low viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. Lower viscosity allows for the production of solvent-free and high solids coatings without or with minimal use of diluents. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automotive coatings, can & coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YD 127 | Aditya Birla | Epotec® YD 127 is an unmodified, medium viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is i...展开 Epotec® YD 127 is an unmodified, medium viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automotive coatings, can & coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YD 127LC | Aditya Birla | Epotec® YD 127LC is a liquid epoxy resin produced from bisphenol-A and epichlorohydrin. It displays less crystallization tendency compared with standard liquid resins, and when cured with a hardener, it delivers excellent mechanical, chemical, electrical,...展开 Epotec® YD 127LC is a liquid epoxy resin produced from bisphenol-A and epichlorohydrin. It displays less crystallization tendency compared with standard liquid resins, and when cured with a hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, and construction applications. 收起 | |
| Epotec® YD 128 | Aditya Birla | Epotec® YD 128 is an unmodified liquid epoxy resin with medium viscosity produced from bisphenol-A and epichlorohydrin. When cured with a hardener, it provides good mechanical, chemical, electrical, and adhesion properties. This product is ideal for use i...展开 Epotec® YD 128 is an unmodified liquid epoxy resin with medium viscosity produced from bisphenol-A and epichlorohydrin. When cured with a hardener, it provides good mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automobile coatings, can & coil coatings, and marine & industrial protective coatings. 收起 | |
| Epotec® YD 128 EL | Aditya Birla | Epotec® YD 128 EL is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for ...展开 Epotec® YD 128 EL is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in high solids solvent-free coatings, adhesives, and construction, electrical, & electronics applications. 收起 | |
| Epotec® YD 128 J | Aditya Birla | Epotec® YD 128 J is an unmodified epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical strength and chemical resistance. This product is ideal for use in solvent-free co...展开 Epotec® YD 128 J is an unmodified epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical strength and chemical resistance. This product is ideal for use in solvent-free coatings, adhesives, and construction, electrical, & electronics applications. 收起 | |
| Epotec® YD 128 R | Aditya Birla | Epotec® YD 128 R is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for u...展开 Epotec® YD 128 R is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in high solids solvent-free coatings, adhesives, and construction, electrical, & electronics applications. 收起 | |
| Epotec® YD 128 S | Aditya Birla | Epotec® YD 128 S is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it displays excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for u...展开 Epotec® YD 128 S is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it displays excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in high solids solvent-free coatings and adhesives. 收起 | |
| Epotec® YD 129 | Aditya Birla | Epotec® YD 129 is an unmodified, high viscosity, liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring appli...展开 Epotec® YD 129 is an unmodified, high viscosity, liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. 收起 | |
| Epotec® YD 134 | Aditya Birla | Epotec® YD 134 is an unmodified, high viscosity, bisphenol-A-based semi-solid epoxy resin used to impart or improve toughness, flexibility, and adhesion. This product is ideal for use in adhesives, marine & industrial protective coatings, solvent-based co...展开 Epotec® YD 134 is an unmodified, high viscosity, bisphenol-A-based semi-solid epoxy resin used to impart or improve toughness, flexibility, and adhesion. This product is ideal for use in adhesives, marine & industrial protective coatings, solvent-based coatings, construction coatings & systems, and electrical & electronic applications. 收起 | |
| Epotec® YD 134 A | Aditya Birla | Epotec® YD 134 A is an unmodified, semi-solid diglycidyl ether of bisphenol-A, dissolved in acetone for ease of handling. This product is ideal for use in coal tar-based coatings, adhesives, flooring applications, road coverings, and high solids protectiv...展开 Epotec® YD 134 A is an unmodified, semi-solid diglycidyl ether of bisphenol-A, dissolved in acetone for ease of handling. This product is ideal for use in coal tar-based coatings, adhesives, flooring applications, road coverings, and high solids protective coatings. 收起 | |
| Epotec® YD 134 S | Aditya Birla | Epotec® YD 134 S is a high molecular weight, bisphenol-A-based semi-solid epoxy resin. This product is ideal for use in high solids protective coatings, tank linings, adhesives, and coal tar-based coatings. | |
| Epotec® YD 134 X 80 | Aditya Birla | Epotec® YD 134 X 80 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 80% solid in xylene for ease of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-base...展开 Epotec® YD 134 X 80 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 80% solid in xylene for ease of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. 收起 | |
| Epotec® YD 134 X 90 | Aditya Birla | Epotec® YD 134 X 90 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 90% solid in xylene for easy of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-base...展开 Epotec® YD 134 X 90 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 90% solid in xylene for easy of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. 收起 | |
| Epotec® YD 136 | Aditya Birla | Epotec® YD 136 is an unmodified, high viscosity, bisphenol-A-based semi-solid diglycidyl ether which can be used to modify other resins to improve adhesion and flexibility. This product is ideal for use in marine & industrial protective coatings, adhesive...展开 Epotec® YD 136 is an unmodified, high viscosity, bisphenol-A-based semi-solid diglycidyl ether which can be used to modify other resins to improve adhesion and flexibility. This product is ideal for use in marine & industrial protective coatings, adhesives, and solvent-based coatings. 收起 | |
| Epotec® YD 515 | Aditya Birla | Epotec® YD 515 is a bisphenol-A liquid epoxy resin, modified with reactive diluent, which displays reduced viscosity and surface tension. This product is ideal for use in self-leveling flooring applications, high solids and solvent-free coatings, and adhe...展开 Epotec® YD 515 is a bisphenol-A liquid epoxy resin, modified with reactive diluent, which displays reduced viscosity and surface tension. This product is ideal for use in self-leveling flooring applications, high solids and solvent-free coatings, and adhesives. 收起 | |
| Epotec® YD 519 | Aditya Birla | Epotec® YD 519 is a general purpose, medium viscosity, reactive diluent-modified diglycidyl ether of bisphenol-A. This product is ideal for use in adhesives, coatings, and laminates. | |
| Epotec® YD 522 | Aditya Birla | Epotec® YD 522 is a low viscosity bisphenol-A liquid epoxy resin, modified with a reactive diluent. The lower viscosity of this product allows for increased filler loading of a formulation. This product is ideal for use in self-leveling flooring applicati...展开 Epotec® YD 522 is a low viscosity bisphenol-A liquid epoxy resin, modified with a reactive diluent. The lower viscosity of this product allows for increased filler loading of a formulation. This product is ideal for use in self-leveling flooring applications, high solids & solvent-free coatings, and adhesives. 收起 | |
| Epotec® YD 529 | Aditya Birla | Epotec® YD 529 is a reactive diluent-modified diglycidyl ether of bisphenol-A, which imparts excellent mechanical properties with minimum effect on chemical resistance. This product is ideal for use in coatings, adhesives, laminates, and filament winding ...展开 Epotec® YD 529 is a reactive diluent-modified diglycidyl ether of bisphenol-A, which imparts excellent mechanical properties with minimum effect on chemical resistance. This product is ideal for use in coatings, adhesives, laminates, and filament winding applications. 收起 | |
| Epotec® YD 535 | Aditya Birla | Epotec® YD 535 is a low viscosity, modified, bisphenol-A-based epoxy resin which displays very good wet out and degassing, as well as excellent adhesion and mechanical, physical, and thermal properties. This product is ideal for use in coatings and adhesi...展开 Epotec® YD 535 is a low viscosity, modified, bisphenol-A-based epoxy resin which displays very good wet out and degassing, as well as excellent adhesion and mechanical, physical, and thermal properties. This product is ideal for use in coatings and adhesives for fiber-reinforced structural components - such as those used in automotive, sporting equipment, navy, aeronautic, marine, and electrical insulation applications. 收起 | |
| Epotec® YD 801 X 75 | Aditya Birla | Epotec® YD 801 X 75 is an unmodified, standard, solid, medium molecular weight epoxy resin dissolved in xylene to facilitate handling. It is a general purpose resin used for coatings. This product is ideal for use in marine & industrial paints, anti-corro...展开 Epotec® YD 801 X 75 is an unmodified, standard, solid, medium molecular weight epoxy resin dissolved in xylene to facilitate handling. It is a general purpose resin used for coatings. This product is ideal for use in marine & industrial paints, anti-corrosive coatings, adhesives, and laminates. 收起 |
