UL Prospector

成功!

成功保存搜索结果
Calcium Sulfate Whisker Shanghai Tengmin Industry Co., Ltd. Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials.
Dow Corning® Class VI Elastomer C6-135 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-135 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part ...展开 Dow Corning® Class VI Elastomer C6-135 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part fabrication, extrusion, and medical devices, including those intended for implantation in humans for up to 29 days. This product has a nominal hardness of 35, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-150 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-150 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part ...展开 Dow Corning® Class VI Elastomer C6-150 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part fabrication, extrusion, and medical devices, including those intended for implantation in humans for up to 29 days. This product has a nominal hardness of 50, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-165 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-165 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part ...展开 Dow Corning® Class VI Elastomer C6-165 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part fabrication, extrusion, and medical devices, including those intended for implantation in humans for up to 29 days. This product has a nominal hardness of 65, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-180 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-180 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part ...展开 Dow Corning® Class VI Elastomer C6-180 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part fabrication, extrusion, and medical devices, including those intended for implantation in humans for up to 29 days. This product has a nominal hardness of 80, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-235 Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-235 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a cat...展开 Dow Corning® Class VI Elastomer C6-235 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a catalyst is necessary to accomplish cure. This product has a nominal hardness of 35, Shore A durometer. 收起
Dow Corning® Class VI Elastomer C6-250 Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-250 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a cat...展开 Dow Corning® Class VI Elastomer C6-250 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a catalyst is necessary to accomplish cure. This product has a nominal hardness of 50, Shore A durometer. 收起
Dow Corning® Class VI Elastomer C6-265 Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-265 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a cat...展开 Dow Corning® Class VI Elastomer C6-265 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a catalyst is necessary to accomplish cure. This product has a nominal hardness of 65, Shore A durometer. 收起
Dow Corning® Class VI Elastomer C6-350LH Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-350LH Parts A & B is a platinum-catalyzed heat-cured silicone high consistency rubber for part fabrication, extrusion and medical devices, including those intended for implantation in humans for up to 29 days. It is supp...展开 Dow Corning® Class VI Elastomer C6-350LH Parts A & B is a platinum-catalyzed heat-cured silicone high consistency rubber for part fabrication, extrusion and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product exhibits lower hysteresis losses (more resiliency) compared to other platinum-catalyzed HCRs, and a reduction in crack growth propagation. 收起
Dow Corning® Class VI Elastomer C6-530 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-530 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part k...展开 Dow Corning® Class VI Elastomer C6-530 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portion of which must be thoroughly blended together prior to use. This product has a nominal hardness of 30, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-540 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-540 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part k...展开 Dow Corning® Class VI Elastomer C6-540 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portion of which must be thoroughly blended together prior to use. This product has a nominal hardness of 40, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-550 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-550 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part k...展开 Dow Corning® Class VI Elastomer C6-550 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portion of which must be thoroughly blended together prior to use. This product has a nominal hardness of 50, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-560 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-560 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part k...展开 Dow Corning® Class VI Elastomer C6-560 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portion of which must be thoroughly blended together prior to use. This product has a nominal hardness of 60, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-570 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-570 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part k...展开 Dow Corning® Class VI Elastomer C6-570 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portion of which must be thoroughly blended together prior to use. This product has a nominal hardness of 70, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. I...展开 Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together before use. This product has a nominal hardness of 40, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-750 Liquid Silicone Rubber Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. I...展开 Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together before use. This product has a nominal hardness of 50, durometer, Shore A. 收起
Dow Corning® Class VI Elastomer C6-770 Liquid Silicone Rubber Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-770 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. I...展开 Dow Corning® Class VI Elastomer C6-770 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together before use. This product has a nominal hardness of 70, durometer, Shore A. 收起
Dow Corning® MG 7-9800 Soft Skin Adhesives Parts A & B Dow Corning Healthcare Dow Corning® MG 7-9800 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications...展开 Dow Corning® MG 7-9800 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications. This product has low adhesion on the skin. 收起
Dow Corning® MG 7-9850 Soft Skin Adhesives Parts A & B Dow Corning Healthcare Dow Corning® MG 7-9850 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications...展开 Dow Corning® MG 7-9850 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications. This product has medium adhesion on the skin. 收起
Dow Corning® MG 7-9900 Soft Skin Adhesives Parts A & B Dow Corning Healthcare Dow Corning® MG 7-9900 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications...展开 Dow Corning® MG 7-9900 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications. This product has high adhesion on the skin. 收起
Dow Corning® MG-2401 Silicone Adhesive Dow Corning Healthcare Dow Corning® MG-2401 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy ap...展开 Dow Corning® MG-2401 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy appliances, attaching appliances for patient monitoring, affixing surgical dressings and pads, adhering external prosthetic devices, and attaching hairpiece devices. 收起
Dow Corning® MG-2402 Silicone Adhesive Dow Corning Healthcare Dow Corning® MG-2402 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy ap...展开 Dow Corning® MG-2402 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy appliances, attaching appliances for patient monitoring, affixing surgical dressings and pads, adhering external prosthetic devices, and attaching hairpiece devices. 收起
Dow Corning® MG-2502 Silicone Adhesive Dow Corning Healthcare Dow Corning® MG-2502 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy ap...展开 Dow Corning® MG-2502 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy appliances, attaching appliances for patient monitoring, affixing surgical dressings and pads, adhering external prosthetic devices, and attaching hairpiece devices. 收起
Dow Corning® QP1-30 Silicone Elastomer Dow Corning Healthcare Dow Corning® QP1-30 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-...展开 Dow Corning® QP1-30 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications. Once compounded with peroxide it can be used to fabricate parts by extrusion, calendaring or molding. When compounded and cured as indicated, the resulting elastomer consists of cross-linked dimethyl and methyl-vinyl siloxane copolymers and reinforcing silica. 收起
Dow Corning® QP1-50 Silicone Elastomer Dow Corning Healthcare Dow Corning® QP1-50 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-...展开 Dow Corning® QP1-50 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications. Once compounded with peroxide it can be used to fabricate parts by extrusion, calendaring or molding. When compounded and cured as indicated, the resulting elastomer consists of cross-linked dimethyl and methyl-vinyl siloxane copolymers and reinforcing silica. 收起
Dow Corning® QP1-60 Silicone Elastomer Dow Corning Healthcare Dow Corning® QP1-60 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-...展开 Dow Corning® QP1-60 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications. Once compounded with peroxide it can be used to fabricate parts by extrusion, calendaring or molding. When compounded and cured as indicated, the resulting elastomer consists of cross-linked dimethyl and methyl-vinyl siloxane copolymers and reinforcing silica. 收起
Dow Corning® QP1-70 Silicone Elastomer Dow Corning Healthcare Dow Corning® QP1-70 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-...展开 Dow Corning® QP1-70 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications. Once compounded with peroxide it can be used to fabricate parts by extrusion, calendaring or molding. When compounded and cured as indicated, the resulting elastomer consists of cross-linked dimethyl and methyl-vinyl siloxane copolymers and reinforcing silica. 收起
Dow Corning® QPI-230 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-230 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...展开 Dow Corning® QPI-230 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 30, durometer Shore A. 收起
Dow Corning® QPI-240 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-240 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...展开 Dow Corning® QPI-240 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 40, durometer Shore A. 收起
Dow Corning® QPI-250 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-250 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...展开 Dow Corning® QPI-250 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 50, durometer Shore A. 收起
Dow Corning® QPI-260 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-260 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...展开 Dow Corning® QPI-260 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 60, durometer Shore A. 收起
Dow Corning® QPI-270 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-270 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...展开 Dow Corning® QPI-270 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 70, durometer Shore A. 收起
Formaldehyde Nanjing Shuguang Chemical Group Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to...展开 Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to fabricate formaldehyde-phenolic resins, urea resins, melamine resins, pentaerythritol, and hexamethylenamine. 收起
Fumed Silica (A-150) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起
Fumed Silica (A-200) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica (A-380) Shanghai Tengmin Industry Co., Ltd. Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起
Fumed Silica 972 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
Fumed Silica 974 Shanghai Tengmin Industry Co., Ltd. Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks.
KH-540 (SG-Si 1110) Nanjing Shuguang Chemical Group KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be us...展开 KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起
KH-550 (SG-Si 1100) Nanjing Shuguang Chemical Group KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in ...展开 KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起
KH-560 (SG-Si 187) Nanjing Shuguang Chemical Group KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It ...展开 KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It can also improve the cohesive force of acrylic latex, sealants, polyurethanes, and epoxy resins for glass sealants. 收起
KH-570 (SG-Si 174) Nanjing Shuguang Chemical Group KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under ...展开 KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under dry or hygrometric conditions. 收起
SG-Si 151 Nanjing Shuguang Chemical Group SG-Si 151, in the form of a colorless to pale yellow clear liquid, is an ethoxylated vinyl silane coupling agent. This product can be used to cross-link adhesives and in special coating materials. It can also crosslink polyethylene and dip treat fibergl...展开 SG-Si 151, in the form of a colorless to pale yellow clear liquid, is an ethoxylated vinyl silane coupling agent. This product can be used to cross-link adhesives and in special coating materials. It can also crosslink polyethylene and dip treat fiberglass or inorganic siliceous fibers. 收起
SG-Ti 502 Nanjing Shuguang Chemical Group SG-Ti 502, in the form of a clear to slightly hazy, colorless to light yellow aqueous liquid, is a titanate coupling agent. This product improves the cross-linking performance for water-borne paints and adhesives. It also makes paint form hard and gloss...展开 SG-Ti 502, in the form of a clear to slightly hazy, colorless to light yellow aqueous liquid, is a titanate coupling agent. This product improves the cross-linking performance for water-borne paints and adhesives. It also makes paint form hard and glossy surfaces on glass, metal, filler, and pigments. 收起
SG-Zr 802 Nanjing Shuguang Chemical Group SG-Zr 802, in the form of a yellowish to brown organic liquid, is a zirconate coupling agent. This product can be used in adhesives and printing inks as a catalyst for cross-linking resins, which improves the binding force and adhesion to the substrate s...展开 SG-Zr 802, in the form of a yellowish to brown organic liquid, is a zirconate coupling agent. This product can be used in adhesives and printing inks as a catalyst for cross-linking resins, which improves the binding force and adhesion to the substrate surface. It can also be used in the electronic industry as a surface treatment for inorganic minerals to improve the dielectric properties of the composites. 收起
Silastic® BioMedical Grade ETR Elastomer Q7-4535 Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4535 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for p...展开 Silastic® BioMedical Grade ETR Elastomer Q7-4535 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for peroxide cure. THis produce has a nominal hardness of 35, Shore A Durometer. 收起
Silastic® BioMedical Grade ETR Elastomer Q7-4550 Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4550 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for p...展开 Silastic® BioMedical Grade ETR Elastomer Q7-4550 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for peroxide cure. THis produce has a nominal hardness of 50, Shore A Durometer. 收起
Silastic® BioMedical Grade ETR Elastomer Q7-4565 Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4565 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for p...展开 Silastic® BioMedical Grade ETR Elastomer Q7-4565 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for peroxide cure. THis produce has a nominal hardness of 65, Shore A Durometer. 收起
Silastic® BioMedical Grade ETR Elastomer Q7-4720 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4720 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricat...展开 Silastic® BioMedical Grade ETR Elastomer Q7-4720 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominal hardness of 20, Shore A durometer. 收起
Silastic® BioMedical Grade ETR Elastomer Q7-4735 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4735 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricat...展开 Silastic® BioMedical Grade ETR Elastomer Q7-4735 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominal hardness of 35, Shore A durometer. 收起
Silastic® BioMedical Grade ETR Elastomer Q7-4750 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4750 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricat...展开 Silastic® BioMedical Grade ETR Elastomer Q7-4750 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominal hardness of 50, Shore A durometer. 收起
Silastic® BioMedical Grade ETR Elastomer Q7-4765 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4765 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricat...展开 Silastic® BioMedical Grade ETR Elastomer Q7-4765 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominal hardness of 65, Shore A durometer. 收起
Silastic® BioMedical Grade ETR Elastomer Q7-4780 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4780 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricat...展开 Silastic® BioMedical Grade ETR Elastomer Q7-4780 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominal hardness of 80, Shore A durometer. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4840 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4840 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4840 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 40, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4850 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4850 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4850 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 50, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4860 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4860 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4860 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 60, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4870 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4870 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4870 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 70, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6830 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6830 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6830 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 30, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6840 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6840 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6840 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 40, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6860 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6860 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6860 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 60, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7840 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7840 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7840 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product has a nominal hardness of 40, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7850 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7850 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7850 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product has a nominal hardness of 50, durometer Shore A. 收起
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7870 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7870 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is...展开 Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7870 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product has a nominal hardness of 70, durometer Shore A. 收起
Silastic® Medical Adhesive Silicone, Type A Dow Corning Healthcare Silastic® Medical Adhesive Silicone, Type A is a one-component, low slump, translucent silicone material for bonding elastomers, synthetics, and metals for part fabrication and medical devices. It is solventless and cures at room temperature upon exposure...展开 Silastic® Medical Adhesive Silicone, Type A is a one-component, low slump, translucent silicone material for bonding elastomers, synthetics, and metals for part fabrication and medical devices. It is solventless and cures at room temperature upon exposure to atmospheric moisture. During the curing process, the silicone adhesive releases acetic acid vapor as a by-product. After final cure, the resulting silicone elastomer possesses the appearance, texture, and general composition of many conventional silicone elastomers. 收起
Silicon Dioxide GJ-103 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase th...展开 Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide JLJ-105 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is...展开 Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide NY-102 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bondin...展开 Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide SP-106 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is a...展开 Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide TL-104 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase m...展开 Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起
Silicon Dioxide XJ-100 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide XJ-100 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties.
Silicon Dioxide XJ-101 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide XJ-101 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties.
Silicon Dioxide ZZ-108 Shanghai Tengmin Industry Co., Ltd. Silicon Dioxide ZZ-108 is a transparent white powder that has high bulkiness and water-solubility properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength, and it is also used in paints and coatings.