UL Prospector

成功!

成功保存搜索结果
D-101 BlueSky Chemical Co., Ltd. D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations.
D-31 BlueSky Chemical Co., Ltd. D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants.
D-32 BlueSky Chemical Co., Ltd. D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...展开 D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. 收起
D-33 BlueSky Chemical Co., Ltd. D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...展开 D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. 收起
D-34 BlueSky Chemical Co., Ltd. D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...展开 D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. 收起
D-35 BlueSky Chemical Co., Ltd. D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml.
D-36 BlueSky Chemical Co., Ltd. D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml.
D-60 BlueSky Chemical Co., Ltd. D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml.
D-70 BlueSky Chemical Co., Ltd. D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml.
D-90 BlueSky Chemical Co., Ltd. D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...展开 D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起
D-91 BlueSky Chemical Co., Ltd. D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...展开 D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起
D-92 BlueSky Chemical Co., Ltd. D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...展开 D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起
GarLAS 16/50 Ganga Rasayanie (Pvt) Ltd GarLAS 16/50 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 150 and a final boiling point of 180. It is often used in paints and varnish, can coatings, ink o...展开 GarLAS 16/50 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 150 and a final boiling point of 180. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起
GarLAS 1924 Ganga Rasayanie (Pvt) Ltd GarLAS 1924 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oi...展开 GarLAS 1924 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起
GarLAS 20/40 Ganga Rasayanie (Pvt) Ltd GarLAS 20/40 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 160 and a final boiling point of 200. It is often used in paints and varnish, can coatings, ink o...展开 GarLAS 20/40 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 160 and a final boiling point of 200. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起
GarLAS 2035 Ganga Rasayanie (Pvt) Ltd GarLAS 2035 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 180 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oi...展开 GarLAS 2035 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 180 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起
GarLAS 2035C Ganga Rasayanie (Pvt) Ltd GarLAS 2035C is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 260. It is often used in paints and varnish, can coatings, ink o...展开 GarLAS 2035C is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 260. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起
GaroSOL™ 100 Ganga Rasayanie (Pvt) Ltd GaroSOL™ 100 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 160 and a final boiling point of 180. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 100 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 160 and a final boiling point of 180. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起
GaroSOL™ 110 Ganga Rasayanie (Pvt) Ltd GaroSOL™ 110 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 110 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起
GaroSOL™ 150 Ganga Rasayanie (Pvt) Ltd GaroSOL™ 150 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 180 and a final boiling point of 220. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 150 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 180 and a final boiling point of 220. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起
GaroSOL™ 150ND Ganga Rasayanie (Pvt) Ltd GaroSOL™ 150ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 175 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coati...展开 GaroSOL™ 150ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 175 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起
GaroSOL™ 155 Ganga Rasayanie (Pvt) Ltd GaroSOL™ 155 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 250. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 155 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 250. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起
GaroSOL™ 160 Ganga Rasayanie (Pvt) Ltd GaroSOL™ 160 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 160 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起
GaroSOL™ 180 Ganga Rasayanie (Pvt) Ltd GaroSOL™ 180 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 200 and a final boiling point of 270. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 180 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 200 and a final boiling point of 270. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起
GaroSOL™ 200 Ganga Rasayanie (Pvt) Ltd GaroSOL™ 200 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 220 and a final boiling point of 300. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 200 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 220 and a final boiling point of 300. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起
GaroSOL™ 200A Ganga Rasayanie (Pvt) Ltd GaroSOL™ 200A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 230 and a final boiling point of 330. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatin...展开 GaroSOL™ 200A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 230 and a final boiling point of 330. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起
GaroSOL™ 200ND Ganga Rasayanie (Pvt) Ltd GaroSOL™ 200ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 320. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coati...展开 GaroSOL™ 200ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 320. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起
GaroSOL™ 250 Ganga Rasayanie (Pvt) Ltd GaroSOL™ 250 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 360. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 250 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 360. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起
GaroSOL™ 250A Ganga Rasayanie (Pvt) Ltd GaroSOL™ 250A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 260 and a final boiling point of 380. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatin...展开 GaroSOL™ 250A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 260 and a final boiling point of 380. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起
GaroSOL™ 300 Ganga Rasayanie (Pvt) Ltd GaroSOL™ 300 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 270 and a final boiling point of 400. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展开 GaroSOL™ 300 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 270 and a final boiling point of 400. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起
LT-151 BlueSky Chemical Co., Ltd. LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml.
LT-530 BlueSky Chemical Co., Ltd. LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml.
LT-540 BlueSky Chemical Co., Ltd. LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...展开 LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. 收起
LT-550 BlueSky Chemical Co., Ltd. LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...展开 LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. 收起
LT-560 BlueSky Chemical Co., Ltd. LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...展开 LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. 收起
LT-590 BlueSky Chemical Co., Ltd. LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...展开 LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. 收起
LT-602 BlueSky Chemical Co., Ltd. LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...展开 LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. 收起
LT-792 BlueSky Chemical Co., Ltd. LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml.
Speedblock 326 Lambson Group Ltd. Speedblock 326 is a UV absorber of the hydroxyl phenyl benzotriazole class and can be used to impart light stability in organic materials and as an adhesive. A pale yellow powder, it contains a range of UV protection with an absorption band width from 220...展开 Speedblock 326 is a UV absorber of the hydroxyl phenyl benzotriazole class and can be used to impart light stability in organic materials and as an adhesive. A pale yellow powder, it contains a range of UV protection with an absorption band width from 220nm to 400nm 收起
Speedblock 327 Lambson Group Ltd. Speedblock 327 is a UV absorber of the hydroxyl phenyl benzotriazole class that has absorption bands in the 200-230nm & 300-360nm ranges. A pale yellow powder, this product can be used in adhesives and polymers.
Speedblock 328 Lambson Group Ltd. Speedblock 328 is a UV absorber of the hydroxyl phenyl benzotriazole class that can be used in adhesives and polymers. This pale yellow powder can be used alone or with additional additional additives including hindered light stabilisers antioxidants.
Speedblock AO2 Lambson Group Ltd. Speedblock AO2 is a sterically hindered phenolic anti-oxidant. It is an efficient and non-discolouring stabiliser for organic substrates including elastomers and adhesives. A white crystalline powder, it is non-polluting, non-toxic with head and water res...展开 Speedblock AO2 is a sterically hindered phenolic anti-oxidant. It is an efficient and non-discolouring stabiliser for organic substrates including elastomers and adhesives. A white crystalline powder, it is non-polluting, non-toxic with head and water resisting performance while being able to combine with other stabilisers. 收起
Speedblock UV-0 Lambson Group Ltd. Speedblock UV-0 is a benzophenone type UV absorber that protects by preferentially absorbing harmful ultraviolet radiation and dissipating it as thermal energy. This pale yellow powder is used in alkyd and epoxy coatings, rubber based adhesives and lacque...展开 Speedblock UV-0 is a benzophenone type UV absorber that protects by preferentially absorbing harmful ultraviolet radiation and dissipating it as thermal energy. This pale yellow powder is used in alkyd and epoxy coatings, rubber based adhesives and lacquers. 收起
Speedblock UV-6 Lambson Group Ltd. Speedblock UV-6 is a benzophenone type UV absorber that protects by preferentially absorbing harmful ultraviolet radiation and dissipating it as thermal energy. This pale yellow powder is compatible with a range of polymers while dispersing little odour a...展开 Speedblock UV-6 is a benzophenone type UV absorber that protects by preferentially absorbing harmful ultraviolet radiation and dissipating it as thermal energy. This pale yellow powder is compatible with a range of polymers while dispersing little odour and volatility during high-temperature processes. It can be used in alkyd and epoxy coatings, varnishes, rubber based adhesives and lacquers. 收起
Speedcure 7005 Lambson Group Ltd. Speedcure 7005 is a polymeric photoinitiator suitable for use when benzophenone free formulations are necessary. This will induce rapid photo-polymerisation when formulated with a suitable polymeric tertiary amine synergist, such as Speedcure 7040. It com...展开 Speedcure 7005 is a polymeric photoinitiator suitable for use when benzophenone free formulations are necessary. This will induce rapid photo-polymerisation when formulated with a suitable polymeric tertiary amine synergist, such as Speedcure 7040. It comes as an off white to pale yellow liquid with low migration, odour and toxicity used in printing inks, wood lacquers, over print varnishes, putties and fillers for particle and chip boards, adhesives and solder masks. 收起
Speedcure 7040 Lambson Group Ltd. Speedcure 7040 is an amine synergist which, when used with Type II polymeric photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale amber liquid contains low migration, toxicity and odour in a...展开 Speedcure 7040 is an amine synergist which, when used with Type II polymeric photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale amber liquid contains low migration, toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It can be applied to wood varnishes, printing inks, over printing varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure 73 Lambson Group Ltd. Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and pro...展开 Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and provides good surface cure with low yellowing. It can be applied to clear coatings, overprint varnishes, wood laquers, silicone based coatings and printing inks. 收起
Speedcure 84 Lambson Group Ltd. Speedcure 84 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This white crystalline powder produces hard coatings with high gloss and provides good s...展开 Speedcure 84 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This white crystalline powder produces hard coatings with high gloss and provides good surface core with low yellowing. It is applied to clear coatings, overprint varnishes, wood lacquers, adhesives, silicone based coatings and printing inks. 收起
Speedcure 97 Lambson Group Ltd. Speedcure 97 is a Type I photoinitiator used to initiate UV photo-polymerisation typically with unsaturated monomers and polymers such as acrylates/methacrylates or vinyl polymers. This white powder increases cure speed, provide surface core and good reac...展开 Speedcure 97 is a Type I photoinitiator used to initiate UV photo-polymerisation typically with unsaturated monomers and polymers such as acrylates/methacrylates or vinyl polymers. This white powder increases cure speed, provide surface core and good reactivity. It is applied to clear coatings, overprint varnishes, wood lacquers, adhesives, silicone based coatings and printing inks. 收起
Speedcure BDMB Lambson Group Ltd. Speedcure BDMB is a reactive Type I photoinitiator that will induce rapid photo-polymerisation when exposed to UV light. This fine pale yellow powder can be used as a through cure in dark colour pigmented systems and will cure complex systems with other c...展开 Speedcure BDMB is a reactive Type I photoinitiator that will induce rapid photo-polymerisation when exposed to UV light. This fine pale yellow powder can be used as a through cure in dark colour pigmented systems and will cure complex systems with other co-initiators. It is applied to UV curable screen printing inks, varnishes for paper metal and plastics, photresists and solder maks, UV curable off-set printing inks, printing plates and adhesives. 收起
Speedcure BEDB Lambson Group Ltd. Speedcure BEDB is a liquid amine synergist which, when used with Type II photoinitiators, generates free radicals capable of initiating the rapid photo-polymerisation of suitable resin formulations. Thioxanthone photoinitiators are highly soluble in Speed...展开 Speedcure BEDB is a liquid amine synergist which, when used with Type II photoinitiators, generates free radicals capable of initiating the rapid photo-polymerisation of suitable resin formulations. Thioxanthone photoinitiators are highly soluble in Speedcure BEDB, affording a single liquid additive. This clear, pale yellow liquid has good soluble properties, low toxicity and low odor. It is used in wood varnishes, printing inks, over print varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure BEM Lambson Group Ltd. Speedcure BEM is a liquid, non-yellowing photoinitiator which, with tertiary amine synergists, initiates rapid polymerisation of suitable resin formulations. This clear light yellow oily liquid is a eutectic mixture of benzophenone and methylbenzophenones...展开 Speedcure BEM is a liquid, non-yellowing photoinitiator which, with tertiary amine synergists, initiates rapid polymerisation of suitable resin formulations. This clear light yellow oily liquid is a eutectic mixture of benzophenone and methylbenzophenones that helps reduce viscosity of formulations, contains solubility and compatibility with unsaturated monomers and does not contribute to photo yellowing. It is applied to printing inks, clear overprint varnishes, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. 收起
Speedcure BKL Lambson Group Ltd. Speedcure BKL is a Type I photoinitiator that forms radicals rapidly by an α cleavage mechanism that initiates the photo-polymerisation of suitable resin formulations. This white crystalline powder is compatible with most pre-polymers, resins and monomers...展开 Speedcure BKL is a Type I photoinitiator that forms radicals rapidly by an α cleavage mechanism that initiates the photo-polymerisation of suitable resin formulations. This white crystalline powder is compatible with most pre-polymers, resins and monomers used in UV curing industry and is a general purpose photoinitiator for inks and coatings. It can be applied to printing inks, over print varnishes, wood lacquers, adhesives as well as putties and fillers for particle and chip boards. 收起
Speedcure BMS Lambson Group Ltd. Speedcure BMS is a Type II photoinitiator that can induce the rapid photo-polymerisation when formulated with a suitable tertiary amine synergist. This white powder, when used in combination with other substances, can initiate polymerisation of pigmented ...展开 Speedcure BMS is a Type II photoinitiator that can induce the rapid photo-polymerisation when formulated with a suitable tertiary amine synergist. This white powder, when used in combination with other substances, can initiate polymerisation of pigmented systems and can form a single liquid additive with a liquid amine synergist comprising both initiator and synergist. It also has low yellowing and can be used in printing inks, clear over print varnishes and adhesives as well as decorative coatings for metal cans and food cartons. 收起
Speedcure BP Lambson Group Ltd. Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibitio...展开 Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibition in printing inks, clear over print varnishes, wood varnishes, decorative coatings for metal cans and cartons as well as adhesives. 收起
Speedcure CPTX Lambson Group Ltd. Speedcure CPTX is a thioxanthone photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations and can also be used with Speedcure 73 to sensitise iodonium salts in cationic cure. Thi...展开 Speedcure CPTX is a thioxanthone photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations and can also be used with Speedcure 73 to sensitise iodonium salts in cationic cure. This yellow crystalline powder contains fast cure speed, excellent depth cure and high final degree of cure suitable for pigmented and thick films. It can be applied to printing inks, wood varnishes, adhesives as well as decorative coatings for metal cans and food cartons. 收起
Speedcure DETX Lambson Group Ltd. Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce prepara...展开 Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce preparation time in printing inks, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. 收起
Speedcure DMB Lambson Group Ltd. Speedcure DMB is an amine synergist that, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale yellow liquid contains low volatiliy and freezing point in addition to l...展开 Speedcure DMB is an amine synergist that, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale yellow liquid contains low volatiliy and freezing point in addition to little photo-yellowing. It is applied to printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. 收起
Speedcure EDB Lambson Group Ltd. Speedcure EDB is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This off white to white powder is used in wood varnishes, printing inks, over pri...展开 Speedcure EDB is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This off white to white powder is used in wood varnishes, printing inks, over printing varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure EHA Lambson Group Ltd. Speedcure EHA is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate the photo-polymerisation of suitable resin formulations. This pale yellow liquid contains a low freezing point and volatility in addit...展开 Speedcure EHA is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate the photo-polymerisation of suitable resin formulations. This pale yellow liquid contains a low freezing point and volatility in addition to acting as a useful solvent in UV formulations. It can be applied to wood varnishes, printing inks, adhesives and decorative coatings for metal cans and food cartons. 收起
Speedcure EPD Lambson Group Ltd. Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addi...展开 Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It is applied to wood varnishes, printing inks, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure MBF Lambson Group Ltd. Speedcure MBF is a photoinitiator that is commonly used for overprint varnish and wood coating applications where excellent surface cure response and non-yellowing are desired. This clear, pale yellow liquid is recommended for systems requiring low odor a...展开 Speedcure MBF is a photoinitiator that is commonly used for overprint varnish and wood coating applications where excellent surface cure response and non-yellowing are desired. This clear, pale yellow liquid is recommended for systems requiring low odor and enables a surface cure as well as increased cross-link density. In addition to wood coating and overprint varnish, it can be applied to inks, industrial coatings and adhesives. 收起
Speedcure MBP Lambson Group Ltd. Speedcure MBP is a cost effective photoinitiator used when benzophenone free formulations are required. It is a free-flowing, easy-to-handle, low-dusting, white crystalline small-flaked material that contains the same curing efficiency and performance cha...展开 Speedcure MBP is a cost effective photoinitiator used when benzophenone free formulations are required. It is a free-flowing, easy-to-handle, low-dusting, white crystalline small-flaked material that contains the same curing efficiency and performance characteristics as benzophenone. It can be applied to printing inks, wood lacquers, over print varnishes, putties and fillers for particle and chips boards, adhesives and solder masks. 收起
Speedcure PBZ Lambson Group Ltd. Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing in...展开 Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing inks, wood varnishes, over print varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. 收起
Speedcure PDO Lambson Group Ltd. Speedcure PDO is a reactive Type I photoinitiator that absorbs at 259 nm. The excited triplet state undergoes fast fragmentation of the N-O bond to form an oxime radical, which is the prime initiator of the polymerisation. This white to pale cream powder ...展开 Speedcure PDO is a reactive Type I photoinitiator that absorbs at 259 nm. The excited triplet state undergoes fast fragmentation of the N-O bond to form an oxime radical, which is the prime initiator of the polymerisation. This white to pale cream powder can be used for curing additives and unsaturated polyesters while exhibiting low yellowing. It is recommended for use in clear coating, adhesives and composites. 收起
Speedcure XFs Lambson Group Ltd. Speedcure XFs is a liquid photoinitiator specifically developed for use in clear coatings such as varnishes and lacquers for wood, paper, metals and plastics. It is also used in the formulation of adhesives and printing inks. A transparent pale yellow liq...展开 Speedcure XFs is a liquid photoinitiator specifically developed for use in clear coatings such as varnishes and lacquers for wood, paper, metals and plastics. It is also used in the formulation of adhesives and printing inks. A transparent pale yellow liquid, it has little odour while exhibiting non-yellowing post curing and efficient surface core. 收起
Uvi-Cure S105E Lambson Group Ltd. Uvi-Cure S105E is a pure cycloaliphatic epoxy base resin designed for electronic coatings and sealants, but can also be used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives as well as flexo, screen and ink jet inks. This...展开 Uvi-Cure S105E is a pure cycloaliphatic epoxy base resin designed for electronic coatings and sealants, but can also be used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives as well as flexo, screen and ink jet inks. This pale yellow to colourless transparent liquid, when cured with cationic photoinitiators, can provide a clear, hard, glossy coating in addition to adhesion and flexibility uses. 收起
Uvi-Cure S110-LV Lambson Group Ltd. Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains l...展开 Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low viscosity enabling a greater scope for meeting end-use processing needs. When this pale yellow to colourless transparent liquid is combined with photoinitiators it produces a clear, hard, glossy coatings. 收起
Uvi-Cure S128 Lambson Group Ltd. Uvi-Cure S128 is a standard cycloaliphatic epoxide resin that contains an adipate chain that can make formulations of this product more flexible. When this product is combined with photoinitiators it can yield a clear, flexible, glossy coating in addition...展开 Uvi-Cure S128 is a standard cycloaliphatic epoxide resin that contains an adipate chain that can make formulations of this product more flexible. When this product is combined with photoinitiators it can yield a clear, flexible, glossy coating in addition to combinations of flexibility and hardness. It is used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants as well as flexo, screen and ink jet inks 收起
Uvi-Cure S130 Lambson Group Ltd. Uvi-Cure S130 is a clear liquid and mono alcohol oxetane used as a reactive diluent, but in particularly for cationic UV curing applications. This product can also improve adhesion to various substrates and hardness of various coatings.
UviCure S105 Lambson Group Ltd. UviCure S105 is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low v...展开 UviCure S105 is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low viscosity enabling a greater scope for meeting end-use processing needs. When this pale yellow to colourless transparent liquid is combined with photoinitiators it produces a clear, hard, glossy coatings. 收起