UL Prospector

成功!

成功保存搜索结果
Alcotex 359B Synthomer Alcotex 359B is a partially hydrolysed polyvinyl acetate. This product has a total solids content of 25-27% and a viscosity of less than 2500 mPa.s. Alcotex 359B is most commonly used in ink jet receivable paper and film coating applications.
Alcotex 864 Synthomer Alcotex 864 is a polyvinyl alcohol, internally plasticized and supplied in a water solution. This product has a total solids content of 34-36% and a viscosity of 3-5 mPa.s. Alcotex 864 is most commonly used in water-soluble film, in jet receivable paper...展开 Alcotex 864 is a polyvinyl alcohol, internally plasticized and supplied in a water solution. This product has a total solids content of 34-36% and a viscosity of 3-5 mPa.s. Alcotex 864 is most commonly used in water-soluble film, in jet receivable paper and film coating, and temporary adhesive applications. 收起
Alcotex 975 Synthomer Alcotex 975 is an internally plasticized polyvinyl alcohol supplied in a solvent system of water and propan-1-ol. This product has a total solid content of 34-36% and a viscosity of 4.5-5.5 mPa.s. Alcotex 975 is most commonly used in water-soluble film,...展开 Alcotex 975 is an internally plasticized polyvinyl alcohol supplied in a solvent system of water and propan-1-ol. This product has a total solid content of 34-36% and a viscosity of 4.5-5.5 mPa.s. Alcotex 975 is most commonly used in water-soluble film, ink jet receivable paper and film coating, and temporary adhesive applications. 收起
D-101 BlueSky Chemical Co., Ltd. D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations.
D-31 BlueSky Chemical Co., Ltd. D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants.
D-32 BlueSky Chemical Co., Ltd. D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...展开 D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. 收起
D-33 BlueSky Chemical Co., Ltd. D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...展开 D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. 收起
D-34 BlueSky Chemical Co., Ltd. D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...展开 D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. 收起
D-35 BlueSky Chemical Co., Ltd. D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml.
D-36 BlueSky Chemical Co., Ltd. D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml.
D-60 BlueSky Chemical Co., Ltd. D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml.
D-70 BlueSky Chemical Co., Ltd. D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml.
D-90 BlueSky Chemical Co., Ltd. D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...展开 D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起
D-91 BlueSky Chemical Co., Ltd. D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...展开 D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起
D-92 BlueSky Chemical Co., Ltd. D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...展开 D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起
Emultex 518 Synthomer Emultex 518 is a polyvinyl alcohol stabilized vinyl acetate homopolymer dispersion. This product has been designed specifically for use in the building industry as a general purpose bonding agent, a concrete and cement additive, and as a general purpose a...展开 Emultex 518 is a polyvinyl alcohol stabilized vinyl acetate homopolymer dispersion. This product has been designed specifically for use in the building industry as a general purpose bonding agent, a concrete and cement additive, and as a general purpose adhesive. 收起
Emultex 5192 Synthomer Emultex 5192 is a polyvinyl alcohol stabilized vinyl acetate homopolymer dispersion. This product is most commonly used as a base dispersion in packaging, paper, board, and wood adhesive applications.
Emultex KR37 Synthomer Emultex KR37 is a vinyl acetate homopolymer stabilized with polyvinyl alcohol and surfactants. This product is most commonly used as a base in adhesive manufacturing applications.
Emultex KR400 Synthomer Emultex KR400 is a high viscosity PVOH stablized vinyl acetate polymer dispersion. This product is most commonly used in parquet, woodworking, packaging, and general purpose adhesive processing applications.
Emultex VV 679 Synthomer Emultex VV 679 is a vinyl acetate/VeoVa10 copolymer dispersion. This product is most commonly used to provide gloss and scrub resistance in matte and silk wall paint, ready-mix filler, and ceramic tile adhesive applications.
LT-151 BlueSky Chemical Co., Ltd. LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml.
LT-530 BlueSky Chemical Co., Ltd. LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml.
LT-540 BlueSky Chemical Co., Ltd. LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...展开 LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. 收起
LT-550 BlueSky Chemical Co., Ltd. LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...展开 LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. 收起
LT-560 BlueSky Chemical Co., Ltd. LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...展开 LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. 收起
LT-590 BlueSky Chemical Co., Ltd. LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...展开 LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. 收起
LT-602 BlueSky Chemical Co., Ltd. LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...展开 LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. 收起
LT-792 BlueSky Chemical Co., Ltd. LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml.
Lipaton SB 29Y141 Synthomer Lipaton SB 29Y141 is a water-based non-ionically stabilized hydrolysis-resistant dispersion of a carboxylated styrene-butadiene copolymer. This product has a total solids content of 47% and a viscosity of 90 mPa.s. Lipaton SB 29Y141 is most commonly use...展开 Lipaton SB 29Y141 is a water-based non-ionically stabilized hydrolysis-resistant dispersion of a carboxylated styrene-butadiene copolymer. This product has a total solids content of 47% and a viscosity of 90 mPa.s. Lipaton SB 29Y141 is most commonly used to modify hydraulic binders in mineral sealing slurry and cement-based adhesive applications. 收起
Lipren X 1112 Synthomer Lipren X 1112 is an aqueous, colloidal dispersion of polymerized of 2-chlorobutadiene (1.3). This product is used in the production of dipped goods and foams.
M30 Synthomer M30 is a low molecular weight, solid polyvinyl acetate in a colorless bead form. This product is most commonly used as an additive in solvent-based coating, ink, and adhesive applications.
M35/73 Solution Synthomer M35/73 Solution is a copolymer of vinyl acetate and dibutyl maleate dissolved in ethyl acetate in a colorless solution form. This product has a total solid content of 59-61% and a density of 1.05 g/cm3. M35/73 Solution is most commonly used in primer, s...展开 M35/73 Solution is a copolymer of vinyl acetate and dibutyl maleate dissolved in ethyl acetate in a colorless solution form. This product has a total solid content of 59-61% and a density of 1.05 g/cm3. M35/73 Solution is most commonly used in primer, sealer, binder, and heat seal adhesive formulation applications. 收起
M50 Synthomer M50 is a medium molecular weight, solid polyvinyl acetate in a solid, colorless bead form. This product has a total solid content of greater than 99% and a viscosity of 80-140 mPa.s. M50 is most commonly used in solvent-based ink, coating, and adhesive ...展开 M50 is a medium molecular weight, solid polyvinyl acetate in a solid, colorless bead form. This product has a total solid content of greater than 99% and a viscosity of 80-140 mPa.s. M50 is most commonly used in solvent-based ink, coating, and adhesive applications. 收起
M60 Synthomer M60 is a low molecular weight, solid polyvinyl acetate in a colorless bead form. This product is most commonly used as an additive in solvent-based coating, ink, adhesive, and melt extrusion system applications.
MCT5 Synthomer MCT5 is a low molecular weight, solid copolymer of vinyl acetate and crotonic acid. This product has a total solids content of greater than 99% and a viscosity of 7-13 mPa.s. MCT5 is most commonly used in solvent-based adhesive and ink, as well as alkali...展开 MCT5 is a low molecular weight, solid copolymer of vinyl acetate and crotonic acid. This product has a total solids content of greater than 99% and a viscosity of 7-13 mPa.s. MCT5 is most commonly used in solvent-based adhesive and ink, as well as alkali removable coating applications. 收起
Plextol D 152 Synthomer Plextol D 152 is an aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 65% an a viscosity of 1000-3000 mPa.s. Plextol D 152 is most commonly used in adhesive applications.
Plextol D 156 Synthomer Plextol D 156 is an APEO-free aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 65% an a viscosity of 200-1600 mPa.s. Plextol D 156 is most commonly used in adhesive applications.
Plextol D 171 Synthomer Plextol D 171 is a finely dispersed aqueous dispersion of an acrylic ester copolymer. This product has a total solids content of 60% an a viscosity of 200-800 mPa.s. Plextol D 171 is most commonly used in adhesive applications.
Plextol D 207 Synthomer Plextol D 207 is an aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 55% an a viscosity of 200-1000 mPa.s. Plextol D 207 is most commonly used in adhesive applications.
Plextol D 224 Synthomer Plextol D 224 is an aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 59% an a viscosity of 40-300 mPa.s. Plextol D 224 is most commonly used in adhesive applications.
Plextol D 237 Synthomer Plextol D 237 is an aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 60% an a viscosity of 400-1200 mPa.s. Plextol D 237 is most commonly used in adhesive applications.
Plextol D 335 Synthomer Plextol D 335 is a form filming aid, solvent, and plasticizer-free, high solids aqueous dispersion of a modified acrylic copolymer. This product has a total solids content of 60.5% and a viscosity of 2000 mPa.s. Plextol D 335 is most commonly used in floo...展开 Plextol D 335 is a form filming aid, solvent, and plasticizer-free, high solids aqueous dispersion of a modified acrylic copolymer. This product has a total solids content of 60.5% and a viscosity of 2000 mPa.s. Plextol D 335 is most commonly used in flooring adhesive applications. 收起
Plextol D 509 Synthomer Plextol D 509 is a ready-for-use finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 600 mPa.s. Plextol D 509 is most commonly used in mortar, plaster, prim...展开 Plextol D 509 is a ready-for-use finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 600 mPa.s. Plextol D 509 is most commonly used in mortar, plaster, primer, sealer, and building adhesive applications. 收起
Plextol DS 152 Synthomer Plextol DS 152 is a low VOC aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 65% and a viscosity of 900-2000 mPa.s. Plextol DS 152 is most commonly used in adhesive applications.
Plextol DS 155 Synthomer Plextol DS 155 is a low VOC aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 65% and a viscosity of less than 800 mPa.s. Plextol DS 155 is most commonly used in flooring adhesive manufacturing applications.
Plextol DV 245 Synthomer Plextol DV 245 is an aqueous emulsion of a self-crosslinking acrylic polymer. This product has a total solids content of 55% and a viscosity of less than 500 mPa.s. Plextol DV 245 is most commonly used in adhesive applications.
Plextol E 303 Synthomer Plextol E 303 is an aqueous emulsion of a self-crosslinking acrylic polymer. This product has a total solids content of 60% and a viscosity of less than 600 mPa.s. Plextol E 303 is most commonly used in flooring adhesive applications.
Plextol R 100 Synthomer Plextol R 100 is an acrylic copolymer dispersion. This product has a total solids content of 62% and a viscosity of less than 550 mPa.s. Plextol R 100 is most commonly used as an additive to caulk, sealant, adhesive, and paint applications.
Plextol R 123 Synthomer Plextol R 123 is an acrylic copolymer dispersion. This product has a total solids content of 60% and a viscosity of 300 mPa.s. Plextol R 123 is most commonly used in exterior elastomeric wall coating, caulk, mastic, and sealant applications where higher...展开 Plextol R 123 is an acrylic copolymer dispersion. This product has a total solids content of 60% and a viscosity of 300 mPa.s. Plextol R 123 is most commonly used in exterior elastomeric wall coating, caulk, mastic, and sealant applications where higher alkali and water-resistance is required. 收起
Plextol R 5376 Synthomer Plextol R 5376 is a surfactant stabilised acrylic ester copolymer dispersion. This product has a total solids content of 55% and a viscosity of 100-1000 mPa.s. Plextol R 5376 is most commonly used in adhesive applications.
Plextol R 5377 Synthomer Plextol R 5377 is a surfactant stabilized acrylic ester copolymer dispersion. This product has a total solids content of 55% and a viscosity of 100-1000 mPa.s. Plextol R 5377 is most commonly used in adhesive applications.
Plextol R 641 Synthomer Plextol R 641 is an aqueous dispersion of an acrylic ester copolymer with pressure sensitive properties. This product has a total solids content of 56% and a viscosity of 300-700 mPa.s. Plextol R 641 is most commonly used in adhesive applications.
Plextol X 4427 Synthomer Plextol X 4427 is an aqueous emulsion of an acrylic-copolymer. This product has a total solids content of 57% and a viscosity of 100-600 mPa.s. Plextol X 4427 is most commonly used in adhesive applications.
Revacryl AE 2091 JA Synthomer Revacryl AE 2091 JA is a high-solids aqueous dispersion of a acrylic ester-styrene copolymer. This product has a total solids content of 57% and a viscosity of 350 mPa.s. Revacryl AE 2091 JA is most commonly used in one-component sealant applications.
Revacryl AE 4522 Synthomer Revacryl AE 4522 is a modified, aqueous dispersion of a styrene-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 350 mPa.s. Revacryl AE 4522 is most commonly used as an additive in cement-free, ready-for-use dis...展开 Revacryl AE 4522 is a modified, aqueous dispersion of a styrene-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 350 mPa.s. Revacryl AE 4522 is most commonly used as an additive in cement-free, ready-for-use dispersion tile adhesive applications. 收起
Revacryl AE 4625 Synthomer Revacryl AE 4625 is a finely dispersed, aqueous dispersion of a styrene-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 500 mPa.s. Revacryl AE 4625 is most commonly used as an additive in paint and adhesive appl...展开 Revacryl AE 4625 is a finely dispersed, aqueous dispersion of a styrene-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 500 mPa.s. Revacryl AE 4625 is most commonly used as an additive in paint and adhesive applications. 收起
Revacryl R 245 Synthomer Revacryl R 245 is a styrene acrylic copolymer dispersion. This product has a total solids content of 50% and a viscosity of 550 mPa.s. Revacryl R 245 is most commonly used in ceramic tile adhesive applications.
Revacryl R 387 Synthomer Revacryl R 387 is a surfactant stabilized, acrylic/styrene copolymer dispersion. This product has a total solids content of 57% and a viscosity of 1500 mPa.s. Revacryl R 387 is most commonly used as a binder in pigment applications.
Reversol P-9303 LV Synthomer Reversol P-9303 LV is a flexible, low viscosity, promoted unsaturated polyester resin in a clear light yellow to clear brown liquid form. This product has a viscosity of 70-170 cPs. Reversol P-9303 LV is most commonly used in automotive putty manufactur...展开 Reversol P-9303 LV is a flexible, low viscosity, promoted unsaturated polyester resin in a clear light yellow to clear brown liquid form. This product has a viscosity of 70-170 cPs. Reversol P-9303 LV is most commonly used in automotive putty manufacturing applications. 收起
Revertex LCS Synthomer Revertex LCS is a high solids, evaporated natural rubber latex concentrate primarily stabilized with potassium hydroxide. This product has a total solids content of 67.5% and a Brookfield viscosity maximum of 1600 cPs. Revertex LCS is most commonly used...展开 Revertex LCS is a high solids, evaporated natural rubber latex concentrate primarily stabilized with potassium hydroxide. This product has a total solids content of 67.5% and a Brookfield viscosity maximum of 1600 cPs. Revertex LCS is most commonly used in adhesive manufacturing applications. 收起
Revertex STD Synthomer Revertex STD is a high-solids, evaporated, natural rubber latex concentrate stabilized with potassium hydroxide compared with centrifuged and other ammoniated latex concentrates. This product has a total solids content of 73% an a Brookfield viscosity ma...展开 Revertex STD is a high-solids, evaporated, natural rubber latex concentrate stabilized with potassium hydroxide compared with centrifuged and other ammoniated latex concentrates. This product has a total solids content of 73% an a Brookfield viscosity maximum of 9000 cPs. Revertex STD is most commonly used in adhesive production applications. 收起
Revultex U-LCTX Synthomer Revultex U-LCTX is an unvulcanized, centrifuged latex preserved with an ultra-low level of ammonia and other preservatives. This product is most commonly used in adhesive production applications where an ultra low level of ammonia is required.
Rohagit SD 15 Synthomer Rohagit SD 15 is a UV-stable, universal thickening agent based on an aqueous dispersion of a thermoplastic methacrylic acid-acrylic ester copolymer. This product has a total solids content of 30% and a viscosity of less than 100. Rohagit SD 15 is most c...展开 Rohagit SD 15 is a UV-stable, universal thickening agent based on an aqueous dispersion of a thermoplastic methacrylic acid-acrylic ester copolymer. This product has a total solids content of 30% and a viscosity of less than 100. Rohagit SD 15 is most commonly used as a thickening agent in paint manufacturing applications. 收起
Rohagit SD 40 Synthomer Rohagit SD 40 is a thickening agent based on an aqueous dispersion of a thermoplastic methacrylic acid-acrylic ester copolymer. This product has a total solids content of 25% and a viscosity of less than 100 mPa.s. Rohagit SD 40 is most commonly used as...展开 Rohagit SD 40 is a thickening agent based on an aqueous dispersion of a thermoplastic methacrylic acid-acrylic ester copolymer. This product has a total solids content of 25% and a viscosity of less than 100 mPa.s. Rohagit SD 40 is most commonly used as a thickening agent in paint manufacturing applications. 收起
Rohagit SD 9523 Synthomer Rohagit SD 9523 is an anionic, water-based dispersion of a butadiene acrylate copolymer. This product has a total solids content of 35.5% and a viscosity of 30 mPa.s. Rohagit SD 9523 is most commonly used as a thickening agent in adhesive dispersion app...展开 Rohagit SD 9523 is an anionic, water-based dispersion of a butadiene acrylate copolymer. This product has a total solids content of 35.5% and a viscosity of 30 mPa.s. Rohagit SD 9523 is most commonly used as a thickening agent in adhesive dispersion applications. 收起
Speedblock 326 Lambson Group Ltd. Speedblock 326 is a UV absorber of the hydroxyl phenyl benzotriazole class and can be used to impart light stability in organic materials and as an adhesive. A pale yellow powder, it contains a range of UV protection with an absorption band width from 220...展开 Speedblock 326 is a UV absorber of the hydroxyl phenyl benzotriazole class and can be used to impart light stability in organic materials and as an adhesive. A pale yellow powder, it contains a range of UV protection with an absorption band width from 220nm to 400nm 收起
Speedblock 327 Lambson Group Ltd. Speedblock 327 is a UV absorber of the hydroxyl phenyl benzotriazole class that has absorption bands in the 200-230nm & 300-360nm ranges. A pale yellow powder, this product can be used in adhesives and polymers.
Speedblock 328 Lambson Group Ltd. Speedblock 328 is a UV absorber of the hydroxyl phenyl benzotriazole class that can be used in adhesives and polymers. This pale yellow powder can be used alone or with additional additional additives including hindered light stabilisers antioxidants.
Speedblock AO2 Lambson Group Ltd. Speedblock AO2 is a sterically hindered phenolic anti-oxidant. It is an efficient and non-discolouring stabiliser for organic substrates including elastomers and adhesives. A white crystalline powder, it is non-polluting, non-toxic with head and water res...展开 Speedblock AO2 is a sterically hindered phenolic anti-oxidant. It is an efficient and non-discolouring stabiliser for organic substrates including elastomers and adhesives. A white crystalline powder, it is non-polluting, non-toxic with head and water resisting performance while being able to combine with other stabilisers. 收起
Speedblock UV-0 Lambson Group Ltd. Speedblock UV-0 is a benzophenone type UV absorber that protects by preferentially absorbing harmful ultraviolet radiation and dissipating it as thermal energy. This pale yellow powder is used in alkyd and epoxy coatings, rubber based adhesives and lacque...展开 Speedblock UV-0 is a benzophenone type UV absorber that protects by preferentially absorbing harmful ultraviolet radiation and dissipating it as thermal energy. This pale yellow powder is used in alkyd and epoxy coatings, rubber based adhesives and lacquers. 收起
Speedblock UV-6 Lambson Group Ltd. Speedblock UV-6 is a benzophenone type UV absorber that protects by preferentially absorbing harmful ultraviolet radiation and dissipating it as thermal energy. This pale yellow powder is compatible with a range of polymers while dispersing little odour a...展开 Speedblock UV-6 is a benzophenone type UV absorber that protects by preferentially absorbing harmful ultraviolet radiation and dissipating it as thermal energy. This pale yellow powder is compatible with a range of polymers while dispersing little odour and volatility during high-temperature processes. It can be used in alkyd and epoxy coatings, varnishes, rubber based adhesives and lacquers. 收起
Speedcure 7005 Lambson Group Ltd. Speedcure 7005 is a polymeric photoinitiator suitable for use when benzophenone free formulations are necessary. This will induce rapid photo-polymerisation when formulated with a suitable polymeric tertiary amine synergist, such as Speedcure 7040. It com...展开 Speedcure 7005 is a polymeric photoinitiator suitable for use when benzophenone free formulations are necessary. This will induce rapid photo-polymerisation when formulated with a suitable polymeric tertiary amine synergist, such as Speedcure 7040. It comes as an off white to pale yellow liquid with low migration, odour and toxicity used in printing inks, wood lacquers, over print varnishes, putties and fillers for particle and chip boards, adhesives and solder masks. 收起
Speedcure 7040 Lambson Group Ltd. Speedcure 7040 is an amine synergist which, when used with Type II polymeric photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale amber liquid contains low migration, toxicity and odour in a...展开 Speedcure 7040 is an amine synergist which, when used with Type II polymeric photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale amber liquid contains low migration, toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It can be applied to wood varnishes, printing inks, over printing varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure 73 Lambson Group Ltd. Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and pro...展开 Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and provides good surface cure with low yellowing. It can be applied to clear coatings, overprint varnishes, wood laquers, silicone based coatings and printing inks. 收起
Speedcure 84 Lambson Group Ltd. Speedcure 84 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This white crystalline powder produces hard coatings with high gloss and provides good s...展开 Speedcure 84 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This white crystalline powder produces hard coatings with high gloss and provides good surface core with low yellowing. It is applied to clear coatings, overprint varnishes, wood lacquers, adhesives, silicone based coatings and printing inks. 收起
Speedcure 97 Lambson Group Ltd. Speedcure 97 is a Type I photoinitiator used to initiate UV photo-polymerisation typically with unsaturated monomers and polymers such as acrylates/methacrylates or vinyl polymers. This white powder increases cure speed, provide surface core and good reac...展开 Speedcure 97 is a Type I photoinitiator used to initiate UV photo-polymerisation typically with unsaturated monomers and polymers such as acrylates/methacrylates or vinyl polymers. This white powder increases cure speed, provide surface core and good reactivity. It is applied to clear coatings, overprint varnishes, wood lacquers, adhesives, silicone based coatings and printing inks. 收起
Speedcure BDMB Lambson Group Ltd. Speedcure BDMB is a reactive Type I photoinitiator that will induce rapid photo-polymerisation when exposed to UV light. This fine pale yellow powder can be used as a through cure in dark colour pigmented systems and will cure complex systems with other c...展开 Speedcure BDMB is a reactive Type I photoinitiator that will induce rapid photo-polymerisation when exposed to UV light. This fine pale yellow powder can be used as a through cure in dark colour pigmented systems and will cure complex systems with other co-initiators. It is applied to UV curable screen printing inks, varnishes for paper metal and plastics, photresists and solder maks, UV curable off-set printing inks, printing plates and adhesives. 收起
Speedcure BEDB Lambson Group Ltd. Speedcure BEDB is a liquid amine synergist which, when used with Type II photoinitiators, generates free radicals capable of initiating the rapid photo-polymerisation of suitable resin formulations. Thioxanthone photoinitiators are highly soluble in Speed...展开 Speedcure BEDB is a liquid amine synergist which, when used with Type II photoinitiators, generates free radicals capable of initiating the rapid photo-polymerisation of suitable resin formulations. Thioxanthone photoinitiators are highly soluble in Speedcure BEDB, affording a single liquid additive. This clear, pale yellow liquid has good soluble properties, low toxicity and low odor. It is used in wood varnishes, printing inks, over print varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure BEM Lambson Group Ltd. Speedcure BEM is a liquid, non-yellowing photoinitiator which, with tertiary amine synergists, initiates rapid polymerisation of suitable resin formulations. This clear light yellow oily liquid is a eutectic mixture of benzophenone and methylbenzophenones...展开 Speedcure BEM is a liquid, non-yellowing photoinitiator which, with tertiary amine synergists, initiates rapid polymerisation of suitable resin formulations. This clear light yellow oily liquid is a eutectic mixture of benzophenone and methylbenzophenones that helps reduce viscosity of formulations, contains solubility and compatibility with unsaturated monomers and does not contribute to photo yellowing. It is applied to printing inks, clear overprint varnishes, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. 收起
Speedcure BKL Lambson Group Ltd. Speedcure BKL is a Type I photoinitiator that forms radicals rapidly by an α cleavage mechanism that initiates the photo-polymerisation of suitable resin formulations. This white crystalline powder is compatible with most pre-polymers, resins and monomers...展开 Speedcure BKL is a Type I photoinitiator that forms radicals rapidly by an α cleavage mechanism that initiates the photo-polymerisation of suitable resin formulations. This white crystalline powder is compatible with most pre-polymers, resins and monomers used in UV curing industry and is a general purpose photoinitiator for inks and coatings. It can be applied to printing inks, over print varnishes, wood lacquers, adhesives as well as putties and fillers for particle and chip boards. 收起
Speedcure BMS Lambson Group Ltd. Speedcure BMS is a Type II photoinitiator that can induce the rapid photo-polymerisation when formulated with a suitable tertiary amine synergist. This white powder, when used in combination with other substances, can initiate polymerisation of pigmented ...展开 Speedcure BMS is a Type II photoinitiator that can induce the rapid photo-polymerisation when formulated with a suitable tertiary amine synergist. This white powder, when used in combination with other substances, can initiate polymerisation of pigmented systems and can form a single liquid additive with a liquid amine synergist comprising both initiator and synergist. It also has low yellowing and can be used in printing inks, clear over print varnishes and adhesives as well as decorative coatings for metal cans and food cartons. 收起
Speedcure BP Lambson Group Ltd. Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibitio...展开 Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibition in printing inks, clear over print varnishes, wood varnishes, decorative coatings for metal cans and cartons as well as adhesives. 收起
Speedcure CPTX Lambson Group Ltd. Speedcure CPTX is a thioxanthone photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations and can also be used with Speedcure 73 to sensitise iodonium salts in cationic cure. Thi...展开 Speedcure CPTX is a thioxanthone photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations and can also be used with Speedcure 73 to sensitise iodonium salts in cationic cure. This yellow crystalline powder contains fast cure speed, excellent depth cure and high final degree of cure suitable for pigmented and thick films. It can be applied to printing inks, wood varnishes, adhesives as well as decorative coatings for metal cans and food cartons. 收起
Speedcure DETX Lambson Group Ltd. Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce prepara...展开 Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce preparation time in printing inks, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. 收起
Speedcure DMB Lambson Group Ltd. Speedcure DMB is an amine synergist that, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale yellow liquid contains low volatiliy and freezing point in addition to l...展开 Speedcure DMB is an amine synergist that, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This pale yellow liquid contains low volatiliy and freezing point in addition to little photo-yellowing. It is applied to printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. 收起
Speedcure EDB Lambson Group Ltd. Speedcure EDB is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This off white to white powder is used in wood varnishes, printing inks, over pri...展开 Speedcure EDB is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This off white to white powder is used in wood varnishes, printing inks, over printing varnishes, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure EHA Lambson Group Ltd. Speedcure EHA is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate the photo-polymerisation of suitable resin formulations. This pale yellow liquid contains a low freezing point and volatility in addit...展开 Speedcure EHA is an amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate the photo-polymerisation of suitable resin formulations. This pale yellow liquid contains a low freezing point and volatility in addition to acting as a useful solvent in UV formulations. It can be applied to wood varnishes, printing inks, adhesives and decorative coatings for metal cans and food cartons. 收起
Speedcure EPD Lambson Group Ltd. Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addi...展开 Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It is applied to wood varnishes, printing inks, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起
Speedcure MBF Lambson Group Ltd. Speedcure MBF is a photoinitiator that is commonly used for overprint varnish and wood coating applications where excellent surface cure response and non-yellowing are desired. This clear, pale yellow liquid is recommended for systems requiring low odor a...展开 Speedcure MBF is a photoinitiator that is commonly used for overprint varnish and wood coating applications where excellent surface cure response and non-yellowing are desired. This clear, pale yellow liquid is recommended for systems requiring low odor and enables a surface cure as well as increased cross-link density. In addition to wood coating and overprint varnish, it can be applied to inks, industrial coatings and adhesives. 收起
Speedcure MBP Lambson Group Ltd. Speedcure MBP is a cost effective photoinitiator used when benzophenone free formulations are required. It is a free-flowing, easy-to-handle, low-dusting, white crystalline small-flaked material that contains the same curing efficiency and performance cha...展开 Speedcure MBP is a cost effective photoinitiator used when benzophenone free formulations are required. It is a free-flowing, easy-to-handle, low-dusting, white crystalline small-flaked material that contains the same curing efficiency and performance characteristics as benzophenone. It can be applied to printing inks, wood lacquers, over print varnishes, putties and fillers for particle and chips boards, adhesives and solder masks. 收起
Speedcure PBZ Lambson Group Ltd. Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing in...展开 Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing inks, wood varnishes, over print varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. 收起
Speedcure PDO Lambson Group Ltd. Speedcure PDO is a reactive Type I photoinitiator that absorbs at 259 nm. The excited triplet state undergoes fast fragmentation of the N-O bond to form an oxime radical, which is the prime initiator of the polymerisation. This white to pale cream powder ...展开 Speedcure PDO is a reactive Type I photoinitiator that absorbs at 259 nm. The excited triplet state undergoes fast fragmentation of the N-O bond to form an oxime radical, which is the prime initiator of the polymerisation. This white to pale cream powder can be used for curing additives and unsaturated polyesters while exhibiting low yellowing. It is recommended for use in clear coating, adhesives and composites. 收起
Speedcure XFs Lambson Group Ltd. Speedcure XFs is a liquid photoinitiator specifically developed for use in clear coatings such as varnishes and lacquers for wood, paper, metals and plastics. It is also used in the formulation of adhesives and printing inks. A transparent pale yellow liq...展开 Speedcure XFs is a liquid photoinitiator specifically developed for use in clear coatings such as varnishes and lacquers for wood, paper, metals and plastics. It is also used in the formulation of adhesives and printing inks. A transparent pale yellow liquid, it has little odour while exhibiting non-yellowing post curing and efficient surface core. 收起
Uvi-Cure S105E Lambson Group Ltd. Uvi-Cure S105E is a pure cycloaliphatic epoxy base resin designed for electronic coatings and sealants, but can also be used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives as well as flexo, screen and ink jet inks. This...展开 Uvi-Cure S105E is a pure cycloaliphatic epoxy base resin designed for electronic coatings and sealants, but can also be used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives as well as flexo, screen and ink jet inks. This pale yellow to colourless transparent liquid, when cured with cationic photoinitiators, can provide a clear, hard, glossy coating in addition to adhesion and flexibility uses. 收起
Uvi-Cure S110-LV Lambson Group Ltd. Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains l...展开 Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low viscosity enabling a greater scope for meeting end-use processing needs. When this pale yellow to colourless transparent liquid is combined with photoinitiators it produces a clear, hard, glossy coatings. 收起
Uvi-Cure S128 Lambson Group Ltd. Uvi-Cure S128 is a standard cycloaliphatic epoxide resin that contains an adipate chain that can make formulations of this product more flexible. When this product is combined with photoinitiators it can yield a clear, flexible, glossy coating in addition...展开 Uvi-Cure S128 is a standard cycloaliphatic epoxide resin that contains an adipate chain that can make formulations of this product more flexible. When this product is combined with photoinitiators it can yield a clear, flexible, glossy coating in addition to combinations of flexibility and hardness. It is used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants as well as flexo, screen and ink jet inks 收起
Uvi-Cure S130 Lambson Group Ltd. Uvi-Cure S130 is a clear liquid and mono alcohol oxetane used as a reactive diluent, but in particularly for cationic UV curing applications. This product can also improve adhesion to various substrates and hardness of various coatings.
UviCure S105 Lambson Group Ltd. UviCure S105 is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low v...展开 UviCure S105 is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low viscosity enabling a greater scope for meeting end-use processing needs. When this pale yellow to colourless transparent liquid is combined with photoinitiators it produces a clear, hard, glossy coatings. 收起