| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展开 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
| D-31 | BlueSky Chemical Co., Ltd. | D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants. | |
| D-32 | BlueSky Chemical Co., Ltd. | D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...展开 D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
| D-33 | BlueSky Chemical Co., Ltd. | D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...展开 D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...展开 D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. 收起 | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| D-36 | BlueSky Chemical Co., Ltd. | D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml. | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...展开 D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...展开 D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...展开 D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| EMULTEX™ KR37LV | Synthomer | EMULTEX™ KR37LV is a vinyl acetate homopolymer stabilised with polyvinyl alcohol and surfactants. It has a good wet tack and can be used as supplied or compounded depending on the adhesive applications. | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| GENFLO™ 3000 | Synthomer | GENFLO™ 3000 is a polymer binder that provides a good balance of soft feel and tensile strength. | |
| Griltex® 11A | EMS-CHEMIE AG (PRIMID) | Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a...展开 Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 1A | EMS-CHEMIE AG (PRIMID) | Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...展开 Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 2A | EMS-CHEMIE AG (PRIMID) | Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...展开 Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 2A S | EMS-CHEMIE AG (PRIMID) | Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination ...展开 Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 6E | EMS-CHEMIE AG (PRIMID) | Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 8E | EMS-CHEMIE AG (PRIMID) | Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® 9E | EMS-CHEMIE AG (PRIMID) | Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...展开 Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is well used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CE 20 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...展开 Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CE 21 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 21 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...展开 Griltex® CE 21 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 160-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CE 22 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 22 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...展开 Griltex® CE 22 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CT 100 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 100 is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle ...展开 Griltex® CT 100 is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CT 101 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 210-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® CT 102 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 102 is a polyphenylamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various parti...展开 Griltex® CT 102 is a polyphenylamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1260A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1260A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It h...展开 Griltex® D 1260A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has good steam and dry cleaning resistance. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1299A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1299A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, non-wovens, apparel materials and non-textile substrates. It is available in granule form in various pa...展开 Griltex® D 1299A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, non-wovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1309E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1309E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1309E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1377E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1377E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1377E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a lamination temperature of 170-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1442E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1442E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1442E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 190-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1500A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1500A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1500A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 150-170°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1519E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1519E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1519E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1523A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1523A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1523A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 210-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1539E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1539E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1539E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 140-170°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1541A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1541A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1541A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1549A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1549A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...展开 Griltex® D 1549A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 180-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1556A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1556A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1556A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1566A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1566A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...展开 Griltex® D 1566A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1582E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1582E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1582E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 120-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1595E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1595E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1595E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1616E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1616E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1616E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1619E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1619E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1619E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 210-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1655E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1655E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1655E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 200-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1662A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1662A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...展开 Griltex® D 1662A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1666A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1666A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...展开 Griltex® D 1666A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 140-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1682E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1682E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1682E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1694A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1694A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1694A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1709A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1709A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1709A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1796A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1796A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1796A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1841E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1841E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 1841E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 210-230°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 1939E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1939E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 1939E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 190-230°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 2132E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2132E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 2132E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a lamination temperature of 110-140°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 2275E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2275E is a flame retardant copolyester-MB thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It has a FR additive and can be used to ble...展开 Griltex® D 2275E is a flame retardant copolyester-MB thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It has a FR additive and can be used to blend with other copolyesters to provide flame retardant properties. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 2315E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2315E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 2315E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 2338E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2338E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 2338E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 210-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 2427E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2427E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 2427E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 120-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 2490A | EMS-CHEMIE AG (PRIMID) | Griltex® D 2490A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...展开 Griltex® D 2490A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® D 2500E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2500E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...展开 Griltex® D 2500E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. 收起 | |
| Griltex® ES 500 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 500 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...展开 Griltex® ES 500 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 170-200 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. 收起 | |
| Griltex® ES 501 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 501 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...展开 Griltex® ES 501 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 160-180 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. 收起 | |
| Griltex® ES 502 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 502 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...展开 Griltex® ES 502 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 170-210 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. 收起 | |
| Griltex® ES 503 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 503 is a hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissi...展开 Griltex® ES 503 is a hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 180-210 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. 收起 | |
| Griltex® ES 504 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 504 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...展开 Griltex® ES 504 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 170-210 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. 收起 | |
| Griltex® ES 505 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 505 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...展开 Griltex® ES 505 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 180-210 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. 收起 | |
| Griltex® ES 700 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 700 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...展开 Griltex® ES 700 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 130-170 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. 收起 | |
| Griltex® ES 701 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 701 is a copolyamide hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...展开 Griltex® ES 701 is a copolyamide hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 130-160 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. 收起 | |
| Griltex® ES 702 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 702 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...展开 Griltex® ES 702 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 160-190 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. 收起 | |
| Griltex® ES 703 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 703 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...展开 Griltex® ES 703 is a copolyester hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 170-210°C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. 收起 | |
| Griltex® ES 704 | EMS-CHEMIE AG (PRIMID) | Griltex® ES 704 is a copolyamide hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and lo...展开 Griltex® ES 704 is a copolyamide hotmelt adhesive formulated for bonding metal, plastics, glass and other smooth surfaces as well as the ability to bond textiles, foams, and various porous materials. It has high flexibility, high thermal stability, and low VOC emissions. It has a hotmelt application temperature of 170-190 °C. This product is used in metal-metal bonding, metal-plastic bonding, metal-textile bonding, and metal-glass bonding. 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| LITEX™ S 79A10 | Synthomer | LITEX™ S 79A10 is a carboxylated styrene/butadiene copolymer latex. | |
| LT-151 | BlueSky Chemical Co., Ltd. | LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml. | |
| LT-530 | BlueSky Chemical Co., Ltd. | LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml. | |
| LT-540 | BlueSky Chemical Co., Ltd. | LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...展开 LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. 收起 | |
| LT-550 | BlueSky Chemical Co., Ltd. | LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...展开 LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. 收起 | |
| LT-560 | BlueSky Chemical Co., Ltd. | LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...展开 LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. 收起 | |
| LT-590 | BlueSky Chemical Co., Ltd. | LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...展开 LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. 收起 | |
| LT-602 | BlueSky Chemical Co., Ltd. | LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...展开 LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
| LT-792 | BlueSky Chemical Co., Ltd. | LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展开 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展开 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展开 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展开 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展开 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| NOVACRYL™ 3797 | Synthomer | NOVACRYL™ 3797 is a water-based, pressure sensitive acrylic designed for removable applications. | |
| NOVACRYL™ PS-R 300 | Synthomer | NOVACRYL™ PS-R 300 is a water-based acrylic polymer designed for removable pressure sensitive adhesives for masking and painter's tapes, labels, and protective films. | |
| Polyvinyl Alcohol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl alcohol is an important chemical raw materials for the manufacture of polyvinyl acetal, resistance to gasoline pipelines and vinylon synthetic fibers, fabric treatment agents, emulsifiers, paper coatings, adhesives, glues and so on. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展开 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 |
