UL Prospector

成功!

成功保存搜索结果
Alcotex 359B Synthomer Alcotex 359B is a partially hydrolysed polyvinyl acetate. This product has a total solids content of 25-27% and a viscosity of less than 2500 mPa.s. Alcotex 359B is most commonly used in ink jet receivable paper and film coating applications.
Alcotex 864 Synthomer Alcotex 864 is a polyvinyl alcohol, internally plasticized and supplied in a water solution. This product has a total solids content of 34-36% and a viscosity of 3-5 mPa.s. Alcotex 864 is most commonly used in water-soluble film, in jet receivable paper...展开 Alcotex 864 is a polyvinyl alcohol, internally plasticized and supplied in a water solution. This product has a total solids content of 34-36% and a viscosity of 3-5 mPa.s. Alcotex 864 is most commonly used in water-soluble film, in jet receivable paper and film coating, and temporary adhesive applications. 收起
Alcotex 975 Synthomer Alcotex 975 is an internally plasticized polyvinyl alcohol supplied in a solvent system of water and propan-1-ol. This product has a total solid content of 34-36% and a viscosity of 4.5-5.5 mPa.s. Alcotex 975 is most commonly used in water-soluble film,...展开 Alcotex 975 is an internally plasticized polyvinyl alcohol supplied in a solvent system of water and propan-1-ol. This product has a total solid content of 34-36% and a viscosity of 4.5-5.5 mPa.s. Alcotex 975 is most commonly used in water-soluble film, ink jet receivable paper and film coating, and temporary adhesive applications. 收起
Barium Sulfate 10HB Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Barium Sulfate 10HB is a white crystalline solid which is obtained from barite and starts off as a highly impure product. After treated with sulfuric acid, barium sulfide gives way to barium sulfate which results in a highly pure product. About 80% of the...展开 Barium Sulfate 10HB is a white crystalline solid which is obtained from barite and starts off as a highly impure product. After treated with sulfuric acid, barium sulfide gives way to barium sulfate which results in a highly pure product. About 80% of the world's barium sulfate produced is consumed as a component of oil well drilling fluid. It can also be utilized as a paper brightener, as it serves as a first coat on the base surface of most photographic paper to increase the reflectiveness of the image. 收起
Barium Sulfate 20 HB Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Barium Sulfate 20 HB is the inorganic compound with the chemical formula BaSO4. This white crystalline is solid, odorless, and is insoluble in water. It occurs as the mineral barite, which is the main source of barium and materials prepared from it. It ha...展开 Barium Sulfate 20 HB is the inorganic compound with the chemical formula BaSO4. This white crystalline is solid, odorless, and is insoluble in water. It occurs as the mineral barite, which is the main source of barium and materials prepared from it. It has a high density with a white opaque appearance which makes it ideal for creating white pigments and also can be utilized as a paper brightener. 收起
Barium Sulfate 44 HB Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Barium Sulfate 44 HB is an odorless, non-toxic white powder that has a specific gravity of 4.36, and is chemically inert and insoluble in water. The white opaque appearance and its high density are exploited in its main applications. It can be utilized as...展开 Barium Sulfate 44 HB is an odorless, non-toxic white powder that has a specific gravity of 4.36, and is chemically inert and insoluble in water. The white opaque appearance and its high density are exploited in its main applications. It can be utilized as a paper brightener as it serves as the first coat on the base surface of most photographic paper to increase the reflectiveness of the image. 收起
Barium Sulfate 5HB Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Barium Sulfate 5HB is a white crystalline solid that is odorless and insoluble in water. It occurs as the mineral barite, which is the main commercial source of barium and minerals prepared from it. The white opaque appearance and its high density are exp...展开 Barium Sulfate 5HB is a white crystalline solid that is odorless and insoluble in water. It occurs as the mineral barite, which is the main commercial source of barium and minerals prepared from it. The white opaque appearance and its high density are exploited in its main applications. It has a wide array of uses including plastics, paints, coatings, rubbers, glass. 收起
Calcined Kaolin CK-02 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Calcined Kaolin CK-02 is a hydrated aluminium silicate crystalline mineral (kaolinite Al2Si2O5(OH)4), formed over many millions of years by the hydrothermal decomposition of granite rocks. Rocks that are rich in kaolin or kaolinite are known as china clay...展开 Calcined Kaolin CK-02 is a hydrated aluminium silicate crystalline mineral (kaolinite Al2Si2O5(OH)4), formed over many millions of years by the hydrothermal decomposition of granite rocks. Rocks that are rich in kaolin or kaolinite are known as china clay or white clay. It is the most used additive in the manufacturing of paper, primarily as a filler and coating. It is also essential for improving the brightness of colors in paint, as well as controlling the texture for dispersment and coatability. 收起
Calcined Kaolin CK-05 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Calcined Kaolin CK-05 is made fro kaolin which is a naturally occurring oxide of two elements; aluminum and silicon. It has many different applications including paints, ceramics, paper, adhesives and rubber. In the adhesives industry it is based almost e...展开 Calcined Kaolin CK-05 is made fro kaolin which is a naturally occurring oxide of two elements; aluminum and silicon. It has many different applications including paints, ceramics, paper, adhesives and rubber. In the adhesives industry it is based almost entirely on the ability to control its rheology (flow). This product can also be used in dyes as an inexpensive filler or extender of the product while increasing color and absorbability. It can also be utilized to improve the brightness of colors in paint, as well as control the texture for dispersment and coatability. 收起
Calcined Kaolin CK-07 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Calcined Kaolin CK-07 is an anhydrous aluminium silicate produced from the natural clay mineral Kaolinite. I has a high melting point, low water absorption and a low body thermal expansion. It can help improve the qualities of coatings such as the suspens...展开 Calcined Kaolin CK-07 is an anhydrous aluminium silicate produced from the natural clay mineral Kaolinite. I has a high melting point, low water absorption and a low body thermal expansion. It can help improve the qualities of coatings such as the suspension, dispersion, hiding power, and pure color. This product also helps improve the whiteness, smoothness and non transparency in coatings. 收起
Calcined Kaolin CK-10 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Calcined Kaolin CK-10 is an anhydrous aluminium silicate produced by heating natural china clay to high temperatures in a kiln. It can be utilized in the oil and paint industry because of its properties of low oil absorption, good dispersion, high thermal...展开 Calcined Kaolin CK-10 is an anhydrous aluminium silicate produced by heating natural china clay to high temperatures in a kiln. It can be utilized in the oil and paint industry because of its properties of low oil absorption, good dispersion, high thermal resistance, low temperature resistance and ultraviolet resistance. It improves the enamel glaze to make it more adhesive and also plays the role of anti-precipitant when used in water paints. 收起
Calcined Kaolin CK-18 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Calcined Kaolin CK-18 is an anhydrous aluminium silicate produced by heating ultrafine natural kaolin to high temperatures in a kiln. The calcination process increases whiteness and hardness, improves electrical properties, and alters the size and shape o...展开 Calcined Kaolin CK-18 is an anhydrous aluminium silicate produced by heating ultrafine natural kaolin to high temperatures in a kiln. The calcination process increases whiteness and hardness, improves electrical properties, and alters the size and shape of the kaolin particles. This substance is high in silica and almina and is widely used in the manufacturing of paint, often as a less expensive alternative to titanium dioxide. It has the exceptional ability to improve the colors and brightness of paints and also controls the texture for coatability. 收起
Calcined Kaolin CK-43 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Calcined Kaolin CK-43 is produced from mined Kaolinite, a naturally occurring aluminum silicate deposit. The mined mineral is blunged and degritted than screened for tramp impurities. The milled powder is calcined (heated) at specified temperatures depend...展开 Calcined Kaolin CK-43 is produced from mined Kaolinite, a naturally occurring aluminum silicate deposit. The mined mineral is blunged and degritted than screened for tramp impurities. The milled powder is calcined (heated) at specified temperatures depending on the grade to be produced. This final product can then be used in the paper industry as a filler and coating. It can also improve the brightness and color in paints. 收起
D-101 BlueSky Chemical Co., Ltd. D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations.
D-31 BlueSky Chemical Co., Ltd. D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants.
D-32 BlueSky Chemical Co., Ltd. D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...展开 D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. 收起
D-33 BlueSky Chemical Co., Ltd. D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...展开 D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. 收起
D-34 BlueSky Chemical Co., Ltd. D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...展开 D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. 收起
D-35 BlueSky Chemical Co., Ltd. D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml.
D-36 BlueSky Chemical Co., Ltd. D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml.
D-60 BlueSky Chemical Co., Ltd. D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml.
D-70 BlueSky Chemical Co., Ltd. D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml.
D-90 BlueSky Chemical Co., Ltd. D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...展开 D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起
D-91 BlueSky Chemical Co., Ltd. D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...展开 D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起
D-92 BlueSky Chemical Co., Ltd. D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...展开 D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起
Diatomite RS 300 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Diatomite RS 300 is made from diatomaceous earth, which is a naturally occurring, soft, chalk-like, sedimentary rock mineral that is easily crumbled into a fine white to off-white powder. This powder has an abrasive feeling similar to pumice powder and is...展开 Diatomite RS 300 is made from diatomaceous earth, which is a naturally occurring, soft, chalk-like, sedimentary rock mineral that is easily crumbled into a fine white to off-white powder. This powder has an abrasive feeling similar to pumice powder and is very light-weight due to its high porosity. It can be used in paints to add bulk and strength, control permeability, and extend primary pigments. It also can be used as a filler and to improve adhesion resistance in many rubber products. 收起
Diatomite RS 500 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Diatomite RS 500 is made from diatomaceous earth, which are the naturally occurring fossilized remains of diatoms. It is a near pure sedimentary deposit consisting almost entirely of silica. It can be used in paints to extend primary pigments, control per...展开 Diatomite RS 500 is made from diatomaceous earth, which are the naturally occurring fossilized remains of diatoms. It is a near pure sedimentary deposit consisting almost entirely of silica. It can be used in paints to extend primary pigments, control permeability, and to add bulk and strength. It also can be used as a filler and to improve adhesion resistance in many rubber products. 收起
Diatomite RS 800 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Diatomite RS 800 is produced from diatomaceous earth which is a naturally occurring, soft, siliceous sedimentary rock. It consists of fossilized remains of diatoms, a type of hard-shelled algae. In paints, diatomite alters glass and sheen, extends primar...展开 Diatomite RS 800 is produced from diatomaceous earth which is a naturally occurring, soft, siliceous sedimentary rock. It consists of fossilized remains of diatoms, a type of hard-shelled algae. In paints, diatomite alters glass and sheen, extends primary pigments, adds bulk and strength, controls permeability and enhances coating adhesion. 收起
Diatomite RT30 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Diatomite RT30 is a powdery mineral composed of the fossilized remains of microscopic single-celled aquatic plants called diatoms. It is a soft, chalk-like, sedimentary rock mineral that is easily crumbled into a fine white to off-white powder. It can be ...展开 Diatomite RT30 is a powdery mineral composed of the fossilized remains of microscopic single-celled aquatic plants called diatoms. It is a soft, chalk-like, sedimentary rock mineral that is easily crumbled into a fine white to off-white powder. It can be used in paints to add bulk and strength, control permeability, and extend primary pigments. It also can be used as a filler and to improve adhesion resistance in many rubber products. 收起
Diatomite TS 10 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Diatomite TS 10 is a friable, light-colored sedimentary rock that is mainly composed of the siliceous skeletal remains of diatoms. It is a very porous rock with a fine particle size and a low specific gravity. These properties make it useful as a filter m...展开 Diatomite TS 10 is a friable, light-colored sedimentary rock that is mainly composed of the siliceous skeletal remains of diatoms. It is a very porous rock with a fine particle size and a low specific gravity. These properties make it useful as a filter media, an absorbent, and as a lightweight filler for rubber, paint, and plastics. When it is used in paints, diatomite can alter the glass and sheen, improve pigments, control permeability, and enhance coating adhesion. 收起
Dry-Grinding Mica MIC-D10 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Dry-Grinding Mica MIC-D10 is a powder created from the mineral mica and can be used to produce paints and coatings. It has white color appearance, good adhesion, smooth feeling, good suspension, a high pearly luster, and can be easily dispersed in water o...展开 Dry-Grinding Mica MIC-D10 is a powder created from the mineral mica and can be used to produce paints and coatings. It has white color appearance, good adhesion, smooth feeling, good suspension, a high pearly luster, and can be easily dispersed in water or oil. It can be applied in paints to help reduce the destruction from ultraviolet light, heat, and it can provide electric insulation. When applied in a coating it will greatly improve its resistance to freezing temperatures and corrosion. 收起
Dry-Processing Mica MIC-D08 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Dry-Processing Mica MIC-D08 is a powder created from the mineral mica and can be used to produce paints and coatings. It has white color appearance, good adhesion, smooth feeling, good suspension, a high pearly luster, and can be easily dispersed in water...展开 Dry-Processing Mica MIC-D08 is a powder created from the mineral mica and can be used to produce paints and coatings. It has white color appearance, good adhesion, smooth feeling, good suspension, a high pearly luster, and can be easily dispersed in water or oil. It can be applied in paints to help reduce the destruction from ultraviolet rays, heat, and it can provide electric insulation. When applied in a coating it will greatly improve its resistance to freezing temperatures and corrosion. 收起
Dry-Processing Mica MIC-D61 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Dry-Processing Mica MIC-D61 is a powder created from the mineral mica and can be used to produce paints and coatings. It can be applied in coatings to help improve its freezing and corrosion resistance, as well as its toughness and compactness. This produ...展开 Dry-Processing Mica MIC-D61 is a powder created from the mineral mica and can be used to produce paints and coatings. It can be applied in coatings to help improve its freezing and corrosion resistance, as well as its toughness and compactness. This product can also be used in paints to provide protection from heat and ultraviolet light. 收起
Emultex 518 Synthomer Emultex 518 is a polyvinyl alcohol stabilized vinyl acetate homopolymer dispersion. This product has been designed specifically for use in the building industry as a general purpose bonding agent, a concrete and cement additive, and as a general purpose a...展开 Emultex 518 is a polyvinyl alcohol stabilized vinyl acetate homopolymer dispersion. This product has been designed specifically for use in the building industry as a general purpose bonding agent, a concrete and cement additive, and as a general purpose adhesive. 收起
Emultex 5192 Synthomer Emultex 5192 is a polyvinyl alcohol stabilized vinyl acetate homopolymer dispersion. This product is most commonly used as a base dispersion in packaging, paper, board, and wood adhesive applications.
Emultex KR37 Synthomer Emultex KR37 is a vinyl acetate homopolymer stabilized with polyvinyl alcohol and surfactants. This product is most commonly used as a base in adhesive manufacturing applications.
Emultex KR400 Synthomer Emultex KR400 is a high viscosity PVOH stablized vinyl acetate polymer dispersion. This product is most commonly used in parquet, woodworking, packaging, and general purpose adhesive processing applications.
Emultex VV 679 Synthomer Emultex VV 679 is a vinyl acetate/VeoVa10 copolymer dispersion. This product is most commonly used to provide gloss and scrub resistance in matte and silk wall paint, ready-mix filler, and ceramic tile adhesive applications.
LT-151 BlueSky Chemical Co., Ltd. LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml.
LT-530 BlueSky Chemical Co., Ltd. LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml.
LT-540 BlueSky Chemical Co., Ltd. LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...展开 LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. 收起
LT-550 BlueSky Chemical Co., Ltd. LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...展开 LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. 收起
LT-560 BlueSky Chemical Co., Ltd. LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...展开 LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. 收起
LT-590 BlueSky Chemical Co., Ltd. LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...展开 LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. 收起
LT-602 BlueSky Chemical Co., Ltd. LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...展开 LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. 收起
LT-792 BlueSky Chemical Co., Ltd. LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml.
Lipaton SB 29Y141 Synthomer Lipaton SB 29Y141 is a water-based non-ionically stabilized hydrolysis-resistant dispersion of a carboxylated styrene-butadiene copolymer. This product has a total solids content of 47% and a viscosity of 90 mPa.s. Lipaton SB 29Y141 is most commonly use...展开 Lipaton SB 29Y141 is a water-based non-ionically stabilized hydrolysis-resistant dispersion of a carboxylated styrene-butadiene copolymer. This product has a total solids content of 47% and a viscosity of 90 mPa.s. Lipaton SB 29Y141 is most commonly used to modify hydraulic binders in mineral sealing slurry and cement-based adhesive applications. 收起
Lipren X 1112 Synthomer Lipren X 1112 is an aqueous, colloidal dispersion of polymerized of 2-chlorobutadiene (1.3). This product is used in the production of dipped goods and foams.
Lithopone B301 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Lithopone B301 is a white pigment consisting of zinc sulfide, barium sulfate, and some zinc oxide. This product used as a pigment and filler in the manufacture of paints, inks, leather, paper, linoleum, and face powders. It offers technical and economic ...展开 Lithopone B301 is a white pigment consisting of zinc sulfide, barium sulfate, and some zinc oxide. This product used as a pigment and filler in the manufacture of paints, inks, leather, paper, linoleum, and face powders. It offers technical and economic advantages wherever organic and inorganic resin systems need to be highly pigmented for specific applications. 收起
Lithopone B301-C2 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Lithopone B301-C2 is an insoluble mixture of zinc sulfide and barium sulfate that precipitates upon mixing solutions of barium sulfide and zinc sulfate. It was made to be a substitute or supplement for lead carbonate (white lead), to overcome its drawbac...展开 Lithopone B301-C2 is an insoluble mixture of zinc sulfide and barium sulfate that precipitates upon mixing solutions of barium sulfide and zinc sulfate. It was made to be a substitute or supplement for lead carbonate (white lead), to overcome its drawbacks of toxicity, poor weathering, and darkening in atmospheres that contain sulfur compounds. Lithopone has traditionally been used in sealing compounds, primers, undercoats and marking paints. The main application for this particular grade is to be used as a water born coating. 收起
Lithopone B301-C3 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Lithopone B301-C3 is composed of a mixture of barium sulfate and zinc sulfide, and is mainly used as a white pigment powder. Lithopone is used as a base for lake pigment and used as a inert pigment for paint, ink and cosmetics as well as in a large range ...展开 Lithopone B301-C3 is composed of a mixture of barium sulfate and zinc sulfide, and is mainly used as a white pigment powder. Lithopone is used as a base for lake pigment and used as a inert pigment for paint, ink and cosmetics as well as in a large range of applications in plastic industry. It is also used as a filler in paper, leather, and linoleum. This particular grade is made specifically for dye printing and also to be used in oil born coatings. 收起
Lithopone B301-C4 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Lithopone B301-C4 is created by mixing zinc sulfide with barium sulfate and is used primarily as a white pigment. It has excellent rheological and optical properties which makes it an ideal product to use in formulating paints, primers, undercoats and sea...展开 Lithopone B301-C4 is created by mixing zinc sulfide with barium sulfate and is used primarily as a white pigment. It has excellent rheological and optical properties which makes it an ideal product to use in formulating paints, primers, undercoats and sealing compounds. This particular grade of Lithopone is designed especially for dye printing and natural coatings. 收起
Lithopone B311 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Lithopone B311 is a mixture of barium sulfate and zinc sulfide that precipitates upon mixing solutions of barium sulfide and zinc sulfate. The precipitate is recovered by filtration, then calcined (roasted) at temperatures above 600° C (1,112° F). This wh...展开 Lithopone B311 is a mixture of barium sulfate and zinc sulfide that precipitates upon mixing solutions of barium sulfide and zinc sulfate. The precipitate is recovered by filtration, then calcined (roasted) at temperatures above 600° C (1,112° F). This white pigment is used in paints, inks, leather, paper, linoleum, and face powder. It was originally created to be used as a substitute for lead because it is non-toxic, technically and economically efficient. 收起
Lithopone Light Fast White Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Lithopone Light Fast White is an insoluble mixture of barium sulfate and zinc sulfide that precipitates upon mixing solutions of barium sulfide and zinc sulfate. This white pigment used is in paints, inks, leather, paper, linoleum, and face powder. It was...展开 Lithopone Light Fast White is an insoluble mixture of barium sulfate and zinc sulfide that precipitates upon mixing solutions of barium sulfide and zinc sulfate. This white pigment used is in paints, inks, leather, paper, linoleum, and face powder. It was created to be a substitute for lead because it is non toxic and provides a much better color in paints. 收起
M30 Synthomer M30 is a low molecular weight, solid polyvinyl acetate in a colorless bead form. This product is most commonly used as an additive in solvent-based coating, ink, and adhesive applications.
M35/73 Solution Synthomer M35/73 Solution is a copolymer of vinyl acetate and dibutyl maleate dissolved in ethyl acetate in a colorless solution form. This product has a total solid content of 59-61% and a density of 1.05 g/cm3. M35/73 Solution is most commonly used in primer, s...展开 M35/73 Solution is a copolymer of vinyl acetate and dibutyl maleate dissolved in ethyl acetate in a colorless solution form. This product has a total solid content of 59-61% and a density of 1.05 g/cm3. M35/73 Solution is most commonly used in primer, sealer, binder, and heat seal adhesive formulation applications. 收起
M50 Synthomer M50 is a medium molecular weight, solid polyvinyl acetate in a solid, colorless bead form. This product has a total solid content of greater than 99% and a viscosity of 80-140 mPa.s. M50 is most commonly used in solvent-based ink, coating, and adhesive ...展开 M50 is a medium molecular weight, solid polyvinyl acetate in a solid, colorless bead form. This product has a total solid content of greater than 99% and a viscosity of 80-140 mPa.s. M50 is most commonly used in solvent-based ink, coating, and adhesive applications. 收起
M60 Synthomer M60 is a low molecular weight, solid polyvinyl acetate in a colorless bead form. This product is most commonly used as an additive in solvent-based coating, ink, adhesive, and melt extrusion system applications.
MCT5 Synthomer MCT5 is a low molecular weight, solid copolymer of vinyl acetate and crotonic acid. This product has a total solids content of greater than 99% and a viscosity of 7-13 mPa.s. MCT5 is most commonly used in solvent-based adhesive and ink, as well as alkali...展开 MCT5 is a low molecular weight, solid copolymer of vinyl acetate and crotonic acid. This product has a total solids content of greater than 99% and a viscosity of 7-13 mPa.s. MCT5 is most commonly used in solvent-based adhesive and ink, as well as alkali removable coating applications. 收起
Organica Bentonite Rheological Additive Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Organica Bentonite Rheological Additive is made from the composites of saponite and calcium bentonite. This product provides good thickening properties, emulsion stability, gel dispersability, and is anti-settling. It is widely applicable in paint, ink, h...展开 Organica Bentonite Rheological Additive is made from the composites of saponite and calcium bentonite. This product provides good thickening properties, emulsion stability, gel dispersability, and is anti-settling. It is widely applicable in paint, ink, high-temperature lubricants, fine coatings, sealants, grease, glass fibers, resin, oil well drilling liquid and cosmetic products. 收起
Plextol D 152 Synthomer Plextol D 152 is an aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 65% an a viscosity of 1000-3000 mPa.s. Plextol D 152 is most commonly used in adhesive applications.
Plextol D 156 Synthomer Plextol D 156 is an APEO-free aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 65% an a viscosity of 200-1600 mPa.s. Plextol D 156 is most commonly used in adhesive applications.
Plextol D 171 Synthomer Plextol D 171 is a finely dispersed aqueous dispersion of an acrylic ester copolymer. This product has a total solids content of 60% an a viscosity of 200-800 mPa.s. Plextol D 171 is most commonly used in adhesive applications.
Plextol D 207 Synthomer Plextol D 207 is an aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 55% an a viscosity of 200-1000 mPa.s. Plextol D 207 is most commonly used in adhesive applications.
Plextol D 224 Synthomer Plextol D 224 is an aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 59% an a viscosity of 40-300 mPa.s. Plextol D 224 is most commonly used in adhesive applications.
Plextol D 237 Synthomer Plextol D 237 is an aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 60% an a viscosity of 400-1200 mPa.s. Plextol D 237 is most commonly used in adhesive applications.
Plextol D 335 Synthomer Plextol D 335 is a form filming aid, solvent, and plasticizer-free, high solids aqueous dispersion of a modified acrylic copolymer. This product has a total solids content of 60.5% and a viscosity of 2000 mPa.s. Plextol D 335 is most commonly used in floo...展开 Plextol D 335 is a form filming aid, solvent, and plasticizer-free, high solids aqueous dispersion of a modified acrylic copolymer. This product has a total solids content of 60.5% and a viscosity of 2000 mPa.s. Plextol D 335 is most commonly used in flooring adhesive applications. 收起
Plextol D 509 Synthomer Plextol D 509 is a ready-for-use finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 600 mPa.s. Plextol D 509 is most commonly used in mortar, plaster, prim...展开 Plextol D 509 is a ready-for-use finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 600 mPa.s. Plextol D 509 is most commonly used in mortar, plaster, primer, sealer, and building adhesive applications. 收起
Plextol DS 152 Synthomer Plextol DS 152 is a low VOC aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 65% and a viscosity of 900-2000 mPa.s. Plextol DS 152 is most commonly used in adhesive applications.
Plextol DS 155 Synthomer Plextol DS 155 is a low VOC aqueous emulsion of a thermoplastic acrylic polymer. This product has a total solids content of 65% and a viscosity of less than 800 mPa.s. Plextol DS 155 is most commonly used in flooring adhesive manufacturing applications.
Plextol DV 245 Synthomer Plextol DV 245 is an aqueous emulsion of a self-crosslinking acrylic polymer. This product has a total solids content of 55% and a viscosity of less than 500 mPa.s. Plextol DV 245 is most commonly used in adhesive applications.
Plextol E 303 Synthomer Plextol E 303 is an aqueous emulsion of a self-crosslinking acrylic polymer. This product has a total solids content of 60% and a viscosity of less than 600 mPa.s. Plextol E 303 is most commonly used in flooring adhesive applications.
Plextol R 100 Synthomer Plextol R 100 is an acrylic copolymer dispersion. This product has a total solids content of 62% and a viscosity of less than 550 mPa.s. Plextol R 100 is most commonly used as an additive to caulk, sealant, adhesive, and paint applications.
Plextol R 123 Synthomer Plextol R 123 is an acrylic copolymer dispersion. This product has a total solids content of 60% and a viscosity of 300 mPa.s. Plextol R 123 is most commonly used in exterior elastomeric wall coating, caulk, mastic, and sealant applications where higher...展开 Plextol R 123 is an acrylic copolymer dispersion. This product has a total solids content of 60% and a viscosity of 300 mPa.s. Plextol R 123 is most commonly used in exterior elastomeric wall coating, caulk, mastic, and sealant applications where higher alkali and water-resistance is required. 收起
Plextol R 5376 Synthomer Plextol R 5376 is a surfactant stabilised acrylic ester copolymer dispersion. This product has a total solids content of 55% and a viscosity of 100-1000 mPa.s. Plextol R 5376 is most commonly used in adhesive applications.
Plextol R 5377 Synthomer Plextol R 5377 is a surfactant stabilized acrylic ester copolymer dispersion. This product has a total solids content of 55% and a viscosity of 100-1000 mPa.s. Plextol R 5377 is most commonly used in adhesive applications.
Plextol R 641 Synthomer Plextol R 641 is an aqueous dispersion of an acrylic ester copolymer with pressure sensitive properties. This product has a total solids content of 56% and a viscosity of 300-700 mPa.s. Plextol R 641 is most commonly used in adhesive applications.
Plextol X 4427 Synthomer Plextol X 4427 is an aqueous emulsion of an acrylic-copolymer. This product has a total solids content of 57% and a viscosity of 100-600 mPa.s. Plextol X 4427 is most commonly used in adhesive applications.
Precipitated Barium Sulfate PBS-B01 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Precipitated Barium Sulfate PBS-B01 is a white amorphous powder that is surface modified and has no iron content. This product has a high dispersibility in active materials with negative electrodes. It can discharge with a crystal center and can prevent l...展开 Precipitated Barium Sulfate PBS-B01 is a white amorphous powder that is surface modified and has no iron content. This product has a high dispersibility in active materials with negative electrodes. It can discharge with a crystal center and can prevent lead surfaces from shrinking. It is an ideal product to be used in making paper coatings because in can improve the luster and fluidity. It has excellent dispersion properties and can be used to create latex paints. 收起
Precipitated Barium Sulfate PBS-F01 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Precipitated Barium Sulfate PBS-F01 is a white oblique side crystallization that has a high whiteness, excellent chemical inertness and weather resistance. It has a small particle structure that is formed under controlled conditions and can be utilized in...展开 Precipitated Barium Sulfate PBS-F01 is a white oblique side crystallization that has a high whiteness, excellent chemical inertness and weather resistance. It has a small particle structure that is formed under controlled conditions and can be utilized in systems that have a strict demand on fineness and settleability. This product is ideally used to create paints, thick coatings, finishing coatings, printed oil ink, adhesion agents and pigments. 收起
Precipitated Barium Sulfate PBS-F02 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Precipitated Barium Sulfate PBS-F02 is the inorganic compound with the chemical formula BaSO4, which is a white crystalline solid that is odorless and insoluble in water. This product has an exceptional chemical inertness and is weather resistant. It can ...展开 Precipitated Barium Sulfate PBS-F02 is the inorganic compound with the chemical formula BaSO4, which is a white crystalline solid that is odorless and insoluble in water. This product has an exceptional chemical inertness and is weather resistant. It can be used in systems that have a strict demand on fineness, wettability and settleability. This product can also reduce the fiber breakage rate and improve fiber dyeability while maintaining a high transparency for an excellent optical performance. In oil paint, barium sulfate is used as a filler or to modify consistency. 收起
Precipitated Barium Sulfate PBS-K01 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Precipitated Barium Sulfate PBS-K01 is a white oblique side crystallization or white amorphous powder that is odorless and non-toxic. This product has a special treatment by organic coating, with high whiteness, no impurities, narrow and uniform size dist...展开 Precipitated Barium Sulfate PBS-K01 is a white oblique side crystallization or white amorphous powder that is odorless and non-toxic. This product has a special treatment by organic coating, with high whiteness, no impurities, narrow and uniform size distribution. It can make pigment crystals uniformly dispersed in solvents and resins, so it provides exceptional performance in hiding power. It can also be used in powder coatings to improve the fluidity, luster, filling and compatibility with differents kinds of pigments. 收起
Precipitated Barium Sulfate PBS-K02 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Precipitated Barium Sulfate PBS-K02 is a white amorphous powder that is non-toxic, odorless, and is soluble in hot concentrated sulfuric acid and insoluble in water, ethanol and acid. This product has no impurities, high whiteness, and has a narrow/unifo...展开 Precipitated Barium Sulfate PBS-K02 is a white amorphous powder that is non-toxic, odorless, and is soluble in hot concentrated sulfuric acid and insoluble in water, ethanol and acid. This product has no impurities, high whiteness, and has a narrow/uniform size distribution. When it is dispersed in a pigment system, there is no secondary cohesion so it can effectively improve the gloss of products. It can also be utilized to create an adhesion agent because of its exceptional filling ability and chemical resistance. 收起
Precipitated Barium Sulfate PBS-MAT02 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Precipitated Barium Sulfate PBS-MAT02 is a white oblique side crystallization or white amorphous powder which is non-toxic and odorless. This particular formula has a specific gravity of 4.5, which is the highest of the non-metallic minerals. It is ideall...展开 Precipitated Barium Sulfate PBS-MAT02 is a white oblique side crystallization or white amorphous powder which is non-toxic and odorless. This particular formula has a specific gravity of 4.5, which is the highest of the non-metallic minerals. It is ideally used in the formulation of paints and coatings to produce excellent matting characteristics. Its low surface ratio and particle size distribution guarantees a low level of abrasiveness. 收起
Precipitated Barium Sulfate PBS-P01 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Precipitated Barium Sulfate PBS-P01 is a white oblique side crystallization or white amorphous powder, that is odorless and nontoxic. It is soluble in hot concentrated sulfuric acid and insoluble in water, ethanol and acid. It has a high whiteness, no bla...展开 Precipitated Barium Sulfate PBS-P01 is a white oblique side crystallization or white amorphous powder, that is odorless and nontoxic. It is soluble in hot concentrated sulfuric acid and insoluble in water, ethanol and acid. It has a high whiteness, no black dot and good dispersibility and can be used to make a variety of products including paints, thick coatings, printed oil ink, powder coatings, adhesion agents and paper coatings. 收起
Precipitated Barium Sulfate PBS-P02 Guangzhou Tiptop Import & Export Co., Ltd. - Guangzhou Tiantai Chemical & Light Industry Co., Ltd. Precipitated Barium Sulfate PBS-P02 is a white oblique side crystallization that is odorless and nontoxic. It is an ideal product to be used in making paints and thick coatings due to its low surface ratio, particle size distribution, and easy fluidity, w...展开 Precipitated Barium Sulfate PBS-P02 is a white oblique side crystallization that is odorless and nontoxic. It is an ideal product to be used in making paints and thick coatings due to its low surface ratio, particle size distribution, and easy fluidity, which can provide a low abrasiveness. The high luster, color stability, and easy fluidity also make it applicable in high grade printed oil ink and high optical activity oil ink. This product can also improve the gloss and brightness when used tighter with pigments. 收起
Revacryl AE 2091 JA Synthomer Revacryl AE 2091 JA is a high-solids aqueous dispersion of a acrylic ester-styrene copolymer. This product has a total solids content of 57% and a viscosity of 350 mPa.s. Revacryl AE 2091 JA is most commonly used in one-component sealant applications.
Revacryl AE 4522 Synthomer Revacryl AE 4522 is a modified, aqueous dispersion of a styrene-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 350 mPa.s. Revacryl AE 4522 is most commonly used as an additive in cement-free, ready-for-use dis...展开 Revacryl AE 4522 is a modified, aqueous dispersion of a styrene-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 350 mPa.s. Revacryl AE 4522 is most commonly used as an additive in cement-free, ready-for-use dispersion tile adhesive applications. 收起
Revacryl AE 4625 Synthomer Revacryl AE 4625 is a finely dispersed, aqueous dispersion of a styrene-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 500 mPa.s. Revacryl AE 4625 is most commonly used as an additive in paint and adhesive appl...展开 Revacryl AE 4625 is a finely dispersed, aqueous dispersion of a styrene-acrylic ester copolymer. This product has a total solids content of 50% and a viscosity of 500 mPa.s. Revacryl AE 4625 is most commonly used as an additive in paint and adhesive applications. 收起
Revacryl R 245 Synthomer Revacryl R 245 is a styrene acrylic copolymer dispersion. This product has a total solids content of 50% and a viscosity of 550 mPa.s. Revacryl R 245 is most commonly used in ceramic tile adhesive applications.
Revacryl R 387 Synthomer Revacryl R 387 is a surfactant stabilized, acrylic/styrene copolymer dispersion. This product has a total solids content of 57% and a viscosity of 1500 mPa.s. Revacryl R 387 is most commonly used as a binder in pigment applications.
Reversol P-9303 LV Synthomer Reversol P-9303 LV is a flexible, low viscosity, promoted unsaturated polyester resin in a clear light yellow to clear brown liquid form. This product has a viscosity of 70-170 cPs. Reversol P-9303 LV is most commonly used in automotive putty manufactur...展开 Reversol P-9303 LV is a flexible, low viscosity, promoted unsaturated polyester resin in a clear light yellow to clear brown liquid form. This product has a viscosity of 70-170 cPs. Reversol P-9303 LV is most commonly used in automotive putty manufacturing applications. 收起
Revertex LCS Synthomer Revertex LCS is a high solids, evaporated natural rubber latex concentrate primarily stabilized with potassium hydroxide. This product has a total solids content of 67.5% and a Brookfield viscosity maximum of 1600 cPs. Revertex LCS is most commonly used...展开 Revertex LCS is a high solids, evaporated natural rubber latex concentrate primarily stabilized with potassium hydroxide. This product has a total solids content of 67.5% and a Brookfield viscosity maximum of 1600 cPs. Revertex LCS is most commonly used in adhesive manufacturing applications. 收起
Revertex STD Synthomer Revertex STD is a high-solids, evaporated, natural rubber latex concentrate stabilized with potassium hydroxide compared with centrifuged and other ammoniated latex concentrates. This product has a total solids content of 73% an a Brookfield viscosity ma...展开 Revertex STD is a high-solids, evaporated, natural rubber latex concentrate stabilized with potassium hydroxide compared with centrifuged and other ammoniated latex concentrates. This product has a total solids content of 73% an a Brookfield viscosity maximum of 9000 cPs. Revertex STD is most commonly used in adhesive production applications. 收起
Revultex U-LCTX Synthomer Revultex U-LCTX is an unvulcanized, centrifuged latex preserved with an ultra-low level of ammonia and other preservatives. This product is most commonly used in adhesive production applications where an ultra low level of ammonia is required.
Rohagit SD 15 Synthomer Rohagit SD 15 is a UV-stable, universal thickening agent based on an aqueous dispersion of a thermoplastic methacrylic acid-acrylic ester copolymer. This product has a total solids content of 30% and a viscosity of less than 100. Rohagit SD 15 is most c...展开 Rohagit SD 15 is a UV-stable, universal thickening agent based on an aqueous dispersion of a thermoplastic methacrylic acid-acrylic ester copolymer. This product has a total solids content of 30% and a viscosity of less than 100. Rohagit SD 15 is most commonly used as a thickening agent in paint manufacturing applications. 收起
Rohagit SD 40 Synthomer Rohagit SD 40 is a thickening agent based on an aqueous dispersion of a thermoplastic methacrylic acid-acrylic ester copolymer. This product has a total solids content of 25% and a viscosity of less than 100 mPa.s. Rohagit SD 40 is most commonly used as...展开 Rohagit SD 40 is a thickening agent based on an aqueous dispersion of a thermoplastic methacrylic acid-acrylic ester copolymer. This product has a total solids content of 25% and a viscosity of less than 100 mPa.s. Rohagit SD 40 is most commonly used as a thickening agent in paint manufacturing applications. 收起
Rohagit SD 9523 Synthomer Rohagit SD 9523 is an anionic, water-based dispersion of a butadiene acrylate copolymer. This product has a total solids content of 35.5% and a viscosity of 30 mPa.s. Rohagit SD 9523 is most commonly used as a thickening agent in adhesive dispersion app...展开 Rohagit SD 9523 is an anionic, water-based dispersion of a butadiene acrylate copolymer. This product has a total solids content of 35.5% and a viscosity of 30 mPa.s. Rohagit SD 9523 is most commonly used as a thickening agent in adhesive dispersion applications. 收起
Speedblock 326 Lambson Group Ltd. Speedblock 326 is a UV absorber of the hydroxyl phenyl benzotriazole class and can be used to impart light stability in organic materials and as an adhesive. A pale yellow powder, it contains a range of UV protection with an absorption band width from 220...展开 Speedblock 326 is a UV absorber of the hydroxyl phenyl benzotriazole class and can be used to impart light stability in organic materials and as an adhesive. A pale yellow powder, it contains a range of UV protection with an absorption band width from 220nm to 400nm 收起
Speedblock 327 Lambson Group Ltd. Speedblock 327 is a UV absorber of the hydroxyl phenyl benzotriazole class that has absorption bands in the 200-230nm & 300-360nm ranges. A pale yellow powder, this product can be used in adhesives and polymers.