| D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
| D-31 | BlueSky Chemical Co., Ltd. | D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants. | |
| D-32 | BlueSky Chemical Co., Ltd. | D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...展开 D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
| D-33 | BlueSky Chemical Co., Ltd. | D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...展开 D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...展开 D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. 收起 | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| D-36 | BlueSky Chemical Co., Ltd. | D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml. | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...展开 D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...展开 D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...展开 D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| EMULTEX™ KR37LV | Synthomer | EMULTEX™ KR37LV is a vinyl acetate homopolymer stabilised with polyvinyl alcohol and surfactants. It has a good wet tack and can be used as supplied or compounded depending on the adhesive applications. | |
| GENFLO™ 3000 | Synthomer | GENFLO™ 3000 is a polymer binder that provides a good balance of soft feel and tensile strength. | |
| Greesol™ A04 A | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 A is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produc...展开 Greesol™ A04 A is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a 2-Ethylhexanol solvent based product. 收起 | |
| Greesol™ A04 BC | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 BC is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 BC is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a 2-Butoxylethanol solvent based product. 收起 | |
| Greesol™ A04 DPM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 DPM is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the prod...展开 Greesol™ A04 DPM is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Dipropandiol monomethanol ether solvent based product. 收起 | |
| Greesol™ A04 E | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 E is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produc...展开 Greesol™ A04 E is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Ethandiol solvent based product. 收起 | |
| Greesol™ A04 NP | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 NP is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 NP is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Propanol solvent based product. 收起 | |
| Greesol™ A04 PA | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 PA is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 PA is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Isopropanol solvent based product. 收起 | |
| Greesol™ A04 PG | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 PG is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 PG is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Propandiol solvent based product. 收起 | |
| Greesol™ A04 SQR | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 SQR is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the prod...展开 Greesol™ A04 SQR is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive and paint and dye manufacturing. It is a solvent based product according to user needs. 收起 | |
| Greesol™ A06 DPM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 DPM is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, ...展开 Greesol™ A06 DPM is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 E | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 E is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, an...展开 Greesol™ A06 E is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 PA | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 PA is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, a...展开 Greesol™ A06 PA is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 SQR | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 SQR is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, ...展开 Greesol™ A06 SQR is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. The dipropylene glycol monomethyl ether percentage can be customized per request. 收起 | |
| Greesol™ ASE | Chem Additive (YueYang) Co.,Ltd. | Greesol™ ASE surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems. This product is well suited in the production of waterborne industrial coatings, wood lacquers, plastic c...展开 Greesol™ ASE surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems. This product is well suited in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV and laminating adhesives. 收起 | |
| Greesol™ DF11 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF11 is a non-silicone, mineral oil-free defoamer. It is characterized as possessing persistent foam suppression. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo inks...展开 Greesol™ DF11 is a non-silicone, mineral oil-free defoamer. It is characterized as possessing persistent foam suppression. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo inks, intaglio inks, OPV, and laminating adhesives. 收起 | |
| Greesol™ DF42 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF42 is a silica-based defoamer. This miscible product is well suited for use in paints, inks, emulsion polymerization processes, and adhesive foam control. | |
| Greesol™ DF901 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF901 is a miscible polyether modified silicone water-based defoamer. Its content of non-volatile substances is 85%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, a...展开 Greesol™ DF901 is a miscible polyether modified silicone water-based defoamer. Its content of non-volatile substances is 85%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ DF975 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF975 is a polyether modified silicone water-based defoamer. Its content of non-volatile substances is 100%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. | |
| Greesol™ DFM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DFM is a polyether modified silicone water-based defoamer. Its content of non-volatile substances is 60%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, OPV. | |
| Greesol™ E40 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E40 is a multifunctional surfactant and gemini nonionic surfactant containing 40% of ethylene oxide. It can be used to improve the coatability of low surface energy substrates such as silane, release paper or plastic film. This product is well su...展开 Greesol™ E40 is a multifunctional surfactant and gemini nonionic surfactant containing 40% of ethylene oxide. It can be used to improve the coatability of low surface energy substrates such as silane, release paper or plastic film. This product is well suit for use in fountain solutions for offset printing applications. This product will not cause rubber roller swelling. 收起 | |
| Greesol™ LE5 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE5 is a water-dispersible leveling agent. This product is a multifunctional additive that reduces friction and is abrasion resistant. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, w...展开 Greesol™ LE5 is a water-dispersible leveling agent. This product is a multifunctional additive that reduces friction and is abrasion resistant. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ LE7 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE7 is a polyorganosiloxane leveling agent that can improve paint flow, reduce cellulite, improve brightness, prevent air bubbles and pinholes. The content of non-volatile substances is 40%. This product is well suited for use in the production o...展开 Greesol™ LE7 is a polyorganosiloxane leveling agent that can improve paint flow, reduce cellulite, improve brightness, prevent air bubbles and pinholes. The content of non-volatile substances is 40%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ LE8 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE8 is a ultra-high molecular weight polyether silicone leveling agent. It can be used for UV and aqueous formulation systems. It has a low friction coefficient, smooth feel, good leveling, low foam stability, and resistance to shrinkage. The con...展开 Greesol™ LE8 is a ultra-high molecular weight polyether silicone leveling agent. It can be used for UV and aqueous formulation systems. It has a low friction coefficient, smooth feel, good leveling, low foam stability, and resistance to shrinkage. The content of non-volatile substances is 40%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| LITEX™ S 79A10 | Synthomer | LITEX™ S 79A10 is a carboxylated styrene/butadiene copolymer latex. | |
| LT-151 | BlueSky Chemical Co., Ltd. | LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml. | |
| LT-530 | BlueSky Chemical Co., Ltd. | LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml. | |
| LT-540 | BlueSky Chemical Co., Ltd. | LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...展开 LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. 收起 | |
| LT-550 | BlueSky Chemical Co., Ltd. | LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...展开 LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. 收起 | |
| LT-560 | BlueSky Chemical Co., Ltd. | LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...展开 LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. 收起 | |
| LT-590 | BlueSky Chemical Co., Ltd. | LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...展开 LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. 收起 | |
| LT-602 | BlueSky Chemical Co., Ltd. | LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...展开 LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
| LT-792 | BlueSky Chemical Co., Ltd. | LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml. | |
| NOVACRYL™ 3797 | Synthomer | NOVACRYL™ 3797 is a water-based, pressure sensitive acrylic designed for removable applications. | |
| NOVACRYL™ PS-R 300 | Synthomer | NOVACRYL™ PS-R 300 is a water-based acrylic polymer designed for removable pressure sensitive adhesives for masking and painter's tapes, labels, and protective films. | |
| Speedblock 326 | Lambson Group Ltd. | Speedblock 326 is a UV absorber of the hydroxyl phenyl benzotriazole class and can be used to impart light stability in organic materials and as an adhesive. A pale yellow powder, it contains a range of UV protection with an absorption band width from 220...展开 Speedblock 326 is a UV absorber of the hydroxyl phenyl benzotriazole class and can be used to impart light stability in organic materials and as an adhesive. A pale yellow powder, it contains a range of UV protection with an absorption band width from 220nm to 400nm 收起 | |
| Speedblock 327 | Lambson Group Ltd. | Speedblock 327 is a UV absorber of the hydroxyl phenyl benzotriazole class that has absorption bands in the 200-230nm & 300-360nm ranges. A pale yellow powder, this product can be used in adhesives and polymers. | |
| Speedblock 328 | Lambson Group Ltd. | Speedblock 328 is a UV absorber of the hydroxyl phenyl benzotriazole class that can be used in adhesives and polymers. This pale yellow powder can be used alone or with additional additional additives including hindered light stabilisers antioxidants. | |
| Speedblock AO2 | Lambson Group Ltd. | Speedblock AO2 is a sterically hindered phenolic anti-oxidant. It is an efficient and non-discolouring stabiliser for organic substrates including elastomers and adhesives. A white crystalline powder, it is non-polluting, non-toxic with head and water res...展开 Speedblock AO2 is a sterically hindered phenolic anti-oxidant. It is an efficient and non-discolouring stabiliser for organic substrates including elastomers and adhesives. A white crystalline powder, it is non-polluting, non-toxic with head and water resisting performance while being able to combine with other stabilisers. 收起 | |
| Speedblock UV-0 | Lambson Group Ltd. | SpeedBlock UV-0 is a benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-0 is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application. | |
| Speedblock UV-6 | Lambson Group Ltd. | SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% de...展开 SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application. 收起 | |
| Speedcure 7005 | Lambson Group Ltd. | SpeedCure 7005 is a liquid polymeric Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 245 and 309 nm. SpeedCure 7005 provides surface cure, low odour and low migration potential when used at 0.5-8 wt% and combined with ...展开 SpeedCure 7005 is a liquid polymeric Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 245 and 309 nm. SpeedCure 7005 provides surface cure, low odour and low migration potential when used at 0.5-8 wt% and combined with an amine synergist in UV curable formulations. 收起 | |
| Speedcure 7040 | Lambson Group Ltd. | SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable f...展开 SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable formulations. 收起 | |
| Speedcure 73 | Lambson Group Ltd. | SpeedCure 73 is a liquid Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 73 provides low yellowing and surface cure when used at 0.5-5 wt% in UV-curable formulations. | |
| Speedcure 84 | Lambson Group Ltd. | SpeedCure 84 is a Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 84 provides low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations. | |
| Speedcure 97 | Lambson Group Ltd. | SpeedCure 97 is a Norrish Type I photoinitiator from the aminoacetophenone family, with an absorption maximum at 306 nm. SpeedCure 97 provides high reactivity, surface and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure BDMB | Lambson Group Ltd. | SpeedCure BDMB is a Norrish Type I photoinitiator from the aminoacetophenone family, with an absorption maximumat 321 nm. SpeedCure BDMB provides high reactivity, surface and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure BEDB | Lambson Group Ltd. | SpeedCure BEDB is a liquid amine synergist of the aminobenzoate family. SpeedCure BEDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure BEM | Lambson Group Ltd. | SpeedCure BEM is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 254.nm. SpeedCure BEM provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulati...展开 SpeedCure BEM is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 254.nm. SpeedCure BEM provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. 收起 | |
| Speedcure BKL | Lambson Group Ltd. | SpeedCure BKL is a Norrish Type I photoinitiator from the acetophenone family, with an absorption maximum at 253.nm. SpeedCure BKL provides high reactivity and surface cure when used at 0.5-5wt% in UV curable formulations. | |
| Speedcure BMS | Lambson Group Ltd. | SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315.nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV a...展开 SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315.nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure BP | Lambson Group Ltd. | SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with an absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulati...展开 SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with an absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulations. 收起 | |
| Speedcure CPTX | Lambson Group Ltd. | SpeedCure CPTX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 314 and 389 nm. SpeedCure CPTX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and co...展开 SpeedCure CPTX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 314 and 389 nm. SpeedCure CPTX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure DETX | Lambson Group Ltd. | SpeedCure DETX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 261, 291 and 386 nm. SpeedCure DETX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and co...展开 SpeedCure DETX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 261, 291 and 386 nm. SpeedCure DETX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure DMB | Lambson Group Ltd. | SpeedCure DMB is an amine synergist of the aliphatic amine family. SpeedCure DMB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure EDB | Lambson Group Ltd. | SpeedCure EDB is an amine synergist of the aminobenzoate family. SpeedCure EDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure EHA | Lambson Group Ltd. | SpeedCure EHA is a liquid amine synergist of the aminobenzoate family. SpeedCure EHA generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure EPD | Lambson Group Ltd. | Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addi...展开 Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It is applied to wood varnishes, printing inks, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起 | |
| Speedcure MBF | Lambson Group Ltd. | SpeedCure MBF is a liquid Norrish Type II photoinitiator of the benzoylformate family, with an absorption maximum at 244_nm. SpeedCure MBF provides very low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations. | |
| Speedcure MBP | Lambson Group Ltd. | SpeedCure MBP is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 259.nm. SpeedCure MBP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulatio...展开 SpeedCure MBP is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 259.nm. SpeedCure MBP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. 收起 | |
| Speedcure PBZ | Lambson Group Ltd. | SpeedCure PBZ is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 290 nm. SpeedCure PBZ provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and L...展开 SpeedCure PBZ is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 290 nm. SpeedCure PBZ provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure PDO | Lambson Group Ltd. | SpeedCure PDO is a Norrish Type I photoinitiator from the oxime ester family, with absorption maximum at 259 nm. SpeedCure PDO provides high reactivity, low yellowing and low volatiles when used at 0.5-5 wt% in UV formulations for electronics applications...展开 SpeedCure PDO is a Norrish Type I photoinitiator from the oxime ester family, with absorption maximum at 259 nm. SpeedCure PDO provides high reactivity, low yellowing and low volatiles when used at 0.5-5 wt% in UV formulations for electronics applications. 收起 | |
| Speedcure XFs | Lambson Group Ltd. | SpeedCure XFs is a blend of difunctional and monofunctional Norrish Type I photoinitiators from the hydroxyacetophenone family, with an absorption maximum at 252 nm. SpeedCure XFs provides low yellowing, surface cure and increased reactivity when used at ...展开 SpeedCure XFs is a blend of difunctional and monofunctional Norrish Type I photoinitiators from the hydroxyacetophenone family, with an absorption maximum at 252 nm. SpeedCure XFs provides low yellowing, surface cure and increased reactivity when used at 0.5-5 wt% in UV curable formulations. 收起 | |
| SUNCRYL™ CR 152 | Synthomer | SUNCRYL™ CR 152 is a release coating for multi-purpose creped paper masking tape applications. | |
| SUNCRYL™ CR 4-42 | Synthomer | SUNCRYL™ CR 4-42 is a release coating for multi-purpose creped paper masking tape applications. | |
| SUNCRYL™ EU 127 | Synthomer | SUNCRYL™ EU 127 is a hydrophobic non-silicone release polymer for paper. | |
| SUNCRYL™ HP 114 | Synthomer | SUNCRYL™ HP 114 is a hydrophobic non-silicone release polymer for film, paper and foil. | |
| SUNCRYL™ HP 98 | Synthomer | SUNCRYL™ HP 98 is a hydrophobic non-silicone release polymer for paper, film, and foil. | |
| SYNTHEBOND™ 1090 | Synthomer | SYNTHEBOND™ 1090 is a styrene acrylic emulsion designed for use as laminating adhesive or in heat seal applications. | |
| SYNTHEBOND™ 7656 | Synthomer | SYNTHEBOND™ 7656 is an acrylic emulsion polymer designed for formulating pressure sensitive adhesives for UL181B HVAC tapes. It demonstrates high cohesion and good instant peel. | |
| SYNTHEBOND™ 7703 | Synthomer | SYNTHEBOND™ 7703 is coater ready acrylic pressure sensitive adhesive designed for clear label applications. | |
| SYNTHEBOND™ E 1020 | Synthomer | SYNTHEBOND™ E 1020 is an acrylic emulsion designed for use as a primer or topcoat for paper and film. | |
| SYNTHEBOND™ E 1030 | Synthomer | SYNTHEBOND™ E 1030 is a high acid-value latex capable of dissolving in ammonia to give high viscosity adhesives. | |
| SYNTHEBOND™ E 1031 | Synthomer | SYNTHEBOND™ E 1031 is a high acid-value latex capable of dissolving in ammonia to give high viscosity adhesives. | |
| SYNTHEBOND™ E 2150 | Synthomer | SYNTHEBOND™ E 2151 is a high solids acrylic polymer for use in a variety of high performance adhesive and caulk applications. | |
| SYNTHEBOND™ E 4010 | Synthomer | SYNTHEBOND™ E 4010 is a styrene acrylic copolymer of use in a variety of adhesive applications. | |
| SYNTHEBOND™ E 6022 | Synthomer | SYNTHEBOND™ E 6022 is a high solids acrylic copolymer for use in a variety of high-performance caulks, sealants, adhesives, and coating applications. | |
| SYNTHEBOND™ E 6091 | Synthomer | SYNTHEBOND™ E 6091 is a high solids acrylic copolymer for use in a variety of high-performance caulks, sealants, adhesives, and coating applications. | |
| SYNTHEBOND™ L 4805 | Synthomer | SYNTHEBOND™ L 4805 is an aqueous acrylic polymer dispersion, which does not contain APEO. It s a pressure sensitive adhesive designed for use in various paper and filmic label applications. | |
| SYNTHEBOND™ PRIME 7501 | Synthomer | SYNTHEBOND™ PRIME 7501 is a coater ready acrylic emulsion polymer formulated for applications where high shear and high temperature resistance is needed. | |
| SYNTHEBOND™ PRIME 7525 | Synthomer | SYNTHEBOND™ PRIME 7525 is a coater ready acrylic emulsion polymer for applications where good low surface energy bonding is needed. | |
| SYNTHEBOND™ PRIME 7526 | Synthomer | SYNTHEBOND™ PRIME 7526 is a coater ready acrylic emulsion polymer for applications where good low surface energy bonding is needed. | |
| SYNTHEBOND™ XA 2207 | Synthomer | SYNTHEBOND™ XA 2207 is an aqueous acrylic polymer dispersion, which does not contain APEO. It s a coater ready pressure sensitive adhesive designed for use in various paper and filmic label applications. | |
| Uvi-Cure S105E | Lambson Group Ltd. | UviCure S105E is a high purity, low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators. | |
| Uvi-Cure S110-LV | Lambson Group Ltd. | Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains l...展开 Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low viscosity enabling a greater scope for meeting end-use processing needs. When this pale yellow to colourless transparent liquid is combined with photoinitiators it produces a clear, hard, glossy coatings. 收起 | |
| Uvi-Cure S128 | Lambson Group Ltd. | UviCure S128 is an adipate based difunctional cycloaliphatic epoxide resin which can be used alone or as an additive in UviCure S105 based formulations to increase the flexibility of a cured coating when polymerised with onium salt photoinitiators. | |
| Uvi-Cure S130 | Lambson Group Ltd. | UviCure S130 is an alcohol functional mono oxetane. It is used as a reactive diluent in cationic formulations and will increase curing speed and adhesion when polymerised with onium salt photoinitiators. | |
| UviCure S105 | Lambson Group Ltd. | UviCure S105 is a low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators. |
