UL Prospector

成功!

成功保存搜索结果
5170 Dispersion West Tech Chemical Ltd 5170 Dispersion, in the form of a milky white liquid, is an aqueous dispersion of an anionic rosin ester. This product is APEO-free and can be used as a tackifier for pressure sensitive adhesives, tapes, labels, waterborne adhesives, and automotive coati...展开 5170 Dispersion, in the form of a milky white liquid, is an aqueous dispersion of an anionic rosin ester. This product is APEO-free and can be used as a tackifier for pressure sensitive adhesives, tapes, labels, waterborne adhesives, and automotive coatings, among other applications. It contains between 54 and 56% solids and its pH lies between 5.0 and 8.0. 收起
8412 Dispersion West Tech Chemical Ltd 8412 Dispersion, in the form of a milky white liquid, is an aqueous dispersion of an anionic rosin ester. This product is APEO-free and can be used as a tackifier for acrylic latex polymers in pressure-sensitive adhesives, tapes, labels, waterborne adhes...展开 8412 Dispersion, in the form of a milky white liquid, is an aqueous dispersion of an anionic rosin ester. This product is APEO-free and can be used as a tackifier for acrylic latex polymers in pressure-sensitive adhesives, tapes, labels, waterborne adhesives, and in automotive coatings. It contains between 52-53% solids and promotes high peel and tack in waterborne pressure sensitive adhesives. 收起
BLUESIL PRIM 10073 Elkem Silicones BLUESIL PRIM 10073 is a product intended to improve the adhesion of BLUESIL one-component and two-component elastomers to metals and certain painted surfaces. The product is available as a ready-to-use solution of reactants diluted in a solvent.
BLUESIL PRIM 12076 Elkem Silicones BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactan...展开 BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactants diluted in a solvent. 收起
BLUESIL SLT 10B OFF WHITE Elkem Silicones BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起
BLUESIL SLT 10B PVC WHITE Elkem Silicones BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起
BLUESIL SLT 10T OFF WHITE Elkem Silicones BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起
BLUESIL SLT 10T PVC WHITE Elkem Silicones BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起
BLUESIL SLT 3B BLACK Elkem Silicones BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起
BLUESIL SLT 3B TRANSLUCENT Elkem Silicones BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起
BLUESIL SLT 3B WHITE Elkem Silicones BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起
BLUESIL SLT 3E BLACK Elkem Silicones BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions.
BLUESIL SLT 3E TRANSLUCENT Elkem Silicones BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions.
BLUESIL SLT 3E WHITE Elkem Silicones BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions.
BLUESIL SLT 3S TRANSLUCENT Elkem Silicones BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing.
BLUESIL SLT 3S WHITE Elkem Silicones BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing.
BLUESIL SLT 4S TRANSCLUCENT Elkem Silicones ​BLUESIL SLT 4S is a one-component, moisture-cure silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, low modulus watertight joint for general sanitary sealing.
BLUESIL SLT AQUARIUM BLACK Elkem Silicones BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起
BLUESIL SLT AQUARIUM TRANSLUCENT Elkem Silicones BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起
BLUESIL SLT NOVART S TRANSLUCENT Elkem Silicones BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to...展开 BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to give a flexible seal of low modulus. 收起
BLUESIL SLT NOVART TRANSLUCENT Elkem Silicones BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起
BLUESIL SLT NOVART WHITE Elkem Silicones BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起
BLUESIL SLT VEC 90 BLACK Elkem Silicones BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, fle...展开 BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, flexible seal. 收起
BLUESIL SLT VEC 99A BLACK Elkem Silicones ​BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and ...展开 ​BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and adhesion properties. Its advantage, relative to conventional two-component elastomers lies in the large  tolerance relative to the accuracy of the ratio A/B. BLUESIL SLT VEC 99 has been specially designed to meet requirements in Structural Glazing applications. 收起
BLUESIL SLT VI 10 BLACK Elkem Silicones BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with h...展开 BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with high mechanical performance levels. 收起
D-101 BlueSky Chemical Co., Ltd. D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations.
D-31 BlueSky Chemical Co., Ltd. D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants.
D-32 BlueSky Chemical Co., Ltd. D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...展开 D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. 收起
D-33 BlueSky Chemical Co., Ltd. D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...展开 D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. 收起
D-34 BlueSky Chemical Co., Ltd. D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...展开 D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. 收起
D-35 BlueSky Chemical Co., Ltd. D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml.
D-36 BlueSky Chemical Co., Ltd. D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml.
D-60 BlueSky Chemical Co., Ltd. D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml.
D-70 BlueSky Chemical Co., Ltd. D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml.
D-90 BlueSky Chemical Co., Ltd. D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...展开 D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起
D-91 BlueSky Chemical Co., Ltd. D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...展开 D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起
D-92 BlueSky Chemical Co., Ltd. D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...展开 D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起
DPR-1st, WW Grade West Tech Chemical Ltd DPR-1st, WW Grade, in the form of a yellowish, transparent solid, is a disproportionated rosin based in gum rosin. This product becomes a stable hydrocarbon after catalytic reactions, and can be used in water-soluble pressure-sensitive adhesives. It con...展开 DPR-1st, WW Grade, in the form of a yellowish, transparent solid, is a disproportionated rosin based in gum rosin. This product becomes a stable hydrocarbon after catalytic reactions, and can be used in water-soluble pressure-sensitive adhesives. It contains 150 mg of potassium hydroxide per gram. 收起
DPR-Extra, Super Grade West Tech Chemical Ltd DPR-Extra, Super Grade, in the form of a yellowish, transparent solid, is a disproportionated rosin based in gum rosin. This product becomes a stable hydrocarbon after catalytic reactions, and can be used in water-soluble pressure-sensitive adhesives. I...展开 DPR-Extra, Super Grade, in the form of a yellowish, transparent solid, is a disproportionated rosin based in gum rosin. This product becomes a stable hydrocarbon after catalytic reactions, and can be used in water-soluble pressure-sensitive adhesives. It contains 155 mg of potassium hydroxide per gram. 收起
Depilate Poultry Rosin West Tech Chemical Ltd Depilate Poultry Rosin, in the form of a pale yellow solid, is a glycerol ester of gum rosin. This product can be used as a modifier for adhesives, inks, and protective coatings. It contains between 3 and 9 mg of potassium hydroxide per gram.
Ester Gum WF6090 West Tech Chemical Ltd Ester Gum WF6090, in the form of a slightly yellow transparent solid, is a glycerol ester of gum rosin. This product can be used as a resin modifier for adhesives, inks, and protective coatings where minimum odor is a requirement. It contains between 3 ...展开 Ester Gum WF6090, in the form of a slightly yellow transparent solid, is a glycerol ester of gum rosin. This product can be used as a resin modifier for adhesives, inks, and protective coatings where minimum odor is a requirement. It contains between 3 and 9 mg of potassium hydroxide per gram, and its specific gravity is between 1.08 and 1.09. 收起
Ester Gum WF8115 West Tech Chemical Ltd Ester Gum WF8115, in the form of a slightly yellow transparent solid, is the glycerol ester of a partially dimerized rosin. This product is a softener that can be used in hot melt adhesives, pressure-sensitive adhesives, solvent-borne and waterborne adhe...展开 Ester Gum WF8115, in the form of a slightly yellow transparent solid, is the glycerol ester of a partially dimerized rosin. This product is a softener that can be used in hot melt adhesives, pressure-sensitive adhesives, solvent-borne and waterborne adhesives. It contains between 3 and 9 mg of potassium hydroxide per gram, and its specific gravity is between 1.08 and 1.09. 收起
Ester Gum WT3095 West Tech Chemical Ltd Ester Gum WT3095, in the form of a pale yellow, transparent solid, is a glycerol ester of gum rosin. This product can be used as a modifier for contact adhesives, hot melt adhesives, pressure-sensitive adhesives, solvent-borne adhesives, and automotive c...展开 Ester Gum WT3095, in the form of a pale yellow, transparent solid, is a glycerol ester of gum rosin. This product can be used as a modifier for contact adhesives, hot melt adhesives, pressure-sensitive adhesives, solvent-borne adhesives, and automotive coatings, among other uses. It contains between 5-10 mg of potassium hydroxide per gram. 收起
LT-151 BlueSky Chemical Co., Ltd. LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml.
LT-530 BlueSky Chemical Co., Ltd. LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml.
LT-540 BlueSky Chemical Co., Ltd. LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...展开 LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. 收起
LT-550 BlueSky Chemical Co., Ltd. LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...展开 LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. 收起
LT-560 BlueSky Chemical Co., Ltd. LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...展开 LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. 收起
LT-590 BlueSky Chemical Co., Ltd. LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...展开 LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. 收起
LT-602 BlueSky Chemical Co., Ltd. LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...展开 LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. 收起
LT-792 BlueSky Chemical Co., Ltd. LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml.
Pentaerythritol Ester WR3105 West Tech Chemical Ltd Pentaerythritol Ester WR3105, in the form of a pale yellow, transparent solid, is a pentaerythritol ester of gum rosin. This product can be used as a modifier for contact adhesives, hot melt adhesives, pressure-sensitive adhesives, solvent-borne adhesive...展开 Pentaerythritol Ester WR3105, in the form of a pale yellow, transparent solid, is a pentaerythritol ester of gum rosin. This product can be used as a modifier for contact adhesives, hot melt adhesives, pressure-sensitive adhesives, solvent-borne adhesives, and automotive coatings. It contains between 6 and 16 mg of potassium hydroxide per gram. 收起
Pentaerythritol Ester of Gum Rosin West Tech Chemical Ltd Pentaerythritol Ester of Gum Rosin, in the form of an amber-colored solid, is an ester of a partially dimerized gum rosin. This product can be used as an additive in inks, varnishes, hot melt adhesives, pressure-sensitive adhesives, and solvent-borne adh...展开 Pentaerythritol Ester of Gum Rosin, in the form of an amber-colored solid, is an ester of a partially dimerized gum rosin. This product can be used as an additive in inks, varnishes, hot melt adhesives, pressure-sensitive adhesives, and solvent-borne adhesives, among other uses. It contains 11 mg of potassium hydroxide per gram. 收起
Pentaerythritol Ester of Gum Rosin WP10135 West Tech Chemical Ltd Pentaerythritol Ester of Gum Rosin WP10135, in the form of a hard, amber-colored solid, is a pentaerythritol ester of a partially dimerized gum rosin. This product can be used in inks, contact adhesives, caulks and sealants, and in pressure-sensitive adh...展开 Pentaerythritol Ester of Gum Rosin WP10135, in the form of a hard, amber-colored solid, is a pentaerythritol ester of a partially dimerized gum rosin. This product can be used in inks, contact adhesives, caulks and sealants, and in pressure-sensitive adhesives, among other uses. It contains at most 16 mg of potassium hydroxide per gram. 收起
Permalyn 5095 West Tech Chemical Ltd Permalyn 5095, in the form of a pale yellow transparent solid, is a glycerol ester of gum rosin. This product can be used as a modifier in contact adhesives, hot melt adhesives, pressure-sensitive adhesives, solvent-borne adhesives, and automotive coatin...展开 Permalyn 5095, in the form of a pale yellow transparent solid, is a glycerol ester of gum rosin. This product can be used as a modifier in contact adhesives, hot melt adhesives, pressure-sensitive adhesives, solvent-borne adhesives, and automotive coatings, among other uses. It contains between 5 and 10 mg of potassium hydroxide per gram. 收起
Permalyn 5110 West Tech Chemical Ltd Permalyn 5110, in the form of a pale yellow transparent solid, is a pentaerythritol ester of gum rosin. This product can be used as a modifier in contact adhesives, hot melt adhesives, pressure-sensitive adhesives, solvent-borne adhesives, and automotive...展开 Permalyn 5110, in the form of a pale yellow transparent solid, is a pentaerythritol ester of gum rosin. This product can be used as a modifier in contact adhesives, hot melt adhesives, pressure-sensitive adhesives, solvent-borne adhesives, and automotive coatings, among other uses. It contains between 6-16 mg of potassium hydroxide per gram. 收起
Permalyn 7110 West Tech Chemical Ltd Permalyn 7110, in the form of a pale yellow solid, is a modified pentaerythritol ester of gum rosin. This product can be used as a modifier in hot melt adhesives, pressure sensitive adhesives, solvent-borne adhesives, and packaging adhesive applications....展开 Permalyn 7110, in the form of a pale yellow solid, is a modified pentaerythritol ester of gum rosin. This product can be used as a modifier in hot melt adhesives, pressure sensitive adhesives, solvent-borne adhesives, and packaging adhesive applications. It contains 20 mg of potassium hydroxide per gram. 收起
Poly-Glycerin Ester West Tech Chemical Ltd Poly-Glycerin Ester, in the form of a pale amber solid, is the glycerol ester of a polymerized rosin. This product can be used in hot melt adhesives, contact adhesives, pressure-sensitive adhesives, and solvent-borne adhesives. It contains 6 mg of potas...展开 Poly-Glycerin Ester, in the form of a pale amber solid, is the glycerol ester of a polymerized rosin. This product can be used in hot melt adhesives, contact adhesives, pressure-sensitive adhesives, and solvent-borne adhesives. It contains 6 mg of potassium hydroxide per gram. 收起
Poly-Pale Ester WP10115 West Tech Chemical Ltd Poly-Pale Ester WP10115, in the form of a pale amber solid, is a glycerol ester of a polymerized rosin. This product can be used as a modifier in contact adhesives, hot melt adhesives, pressure-sensitive adhesives, and solvent-borne adhesives. It contai...展开 Poly-Pale Ester WP10115, in the form of a pale amber solid, is a glycerol ester of a polymerized rosin. This product can be used as a modifier in contact adhesives, hot melt adhesives, pressure-sensitive adhesives, and solvent-borne adhesives. It contains less than 8 mg of potassium hydroxide per gram. 收起
Polymerized Rosin 115 West Tech Chemical Ltd Polymerized Rosin 115, in the form of a pale yellow transparent solid, is a partially polymerized rosin. This product can be used in caulks, sealants, contact adhesives, paints, varnishes, and solvent-borne adhesives, among other uses. It contains great...展开 Polymerized Rosin 115, in the form of a pale yellow transparent solid, is a partially polymerized rosin. This product can be used in caulks, sealants, contact adhesives, paints, varnishes, and solvent-borne adhesives, among other uses. It contains greater than 14 mg of potassium hydroxide per gram. 收起
Polymerized Rosin 99 West Tech Chemical Ltd Polymerized Rosin 99, in the form of a pale yellow, transparent solid, is a partially polymerized rosin. This product can be used in caulks, sealants, hot melt adhesives, paints, varnishes, and solvent-borne adhesives, among other uses. It contains grea...展开 Polymerized Rosin 99, in the form of a pale yellow, transparent solid, is a partially polymerized rosin. This product can be used in caulks, sealants, hot melt adhesives, paints, varnishes, and solvent-borne adhesives, among other uses. It contains greater than 140 mg of potassium hydroxide per gram. 收起
Polymerized Rosin WT95 West Tech Chemical Ltd Polymerized Rosin WT95, in the form of a pale yellow, transparent solid, is a partially polymerized rosin. This product can be used in inks, caulks and sealants, hot melt adhesives, and paints and varnishes, among other uses. It contains greater than 15...展开 Polymerized Rosin WT95, in the form of a pale yellow, transparent solid, is a partially polymerized rosin. This product can be used in inks, caulks and sealants, hot melt adhesives, and paints and varnishes, among other uses. It contains greater than 150 mg of potassium hydroxide per gram. 收起
WH8085 West Tech Chemical Ltd WH8085, in the form of a slightly yellow, transparent solid, is a glycerol ester of a partially hydrogenated rosin. This product can be used in hot melt adhesives, pressure-sensitive adhesives, and in laminating adhesives. It contains between 3 and 8 mg...展开 WH8085, in the form of a slightly yellow, transparent solid, is a glycerol ester of a partially hydrogenated rosin. This product can be used in hot melt adhesives, pressure-sensitive adhesives, and in laminating adhesives. It contains between 3 and 8 mg of potassium hydroxide per gram, and its specific gravity is between 1.08 and 1.09. 收起
WT8110 West Tech Chemical Ltd WT8110, in the form of a pale yellow, transparent solid, is a pentaerythritol ester of gum rosin. This product can be used as a modifier in hot melt adhesives, pressure-sensitive adhesives, and solvent-borne adhesives. It contains between 6 and 16 mg of...展开 WT8110, in the form of a pale yellow, transparent solid, is a pentaerythritol ester of gum rosin. This product can be used as a modifier in hot melt adhesives, pressure-sensitive adhesives, and solvent-borne adhesives. It contains between 6 and 16 mg of potassium hydroxide per gram. 收起
West Tech 3179 Dispersion West Tech Chemical Ltd West Tech 3179 Dispersion, in the form of a milky white liquid, is an aqueous dispersion of an anionic rosin ester. This product is APEO-free and can be used as a tackifier for acrylic latex polymers in pressure-sensitive adhesives, tapes, labels, waterb...展开 West Tech 3179 Dispersion, in the form of a milky white liquid, is an aqueous dispersion of an anionic rosin ester. This product is APEO-free and can be used as a tackifier for acrylic latex polymers in pressure-sensitive adhesives, tapes, labels, waterborne adhesives, and automotive coatings. It contains between 49-51% solids and promotes high peel and tack in waterborne pressure-sensitive adhesives. 收起
West Tech 3180 Dispersion West Tech Chemical Ltd West Tech 3180 Dispersion, in the form of a milky white liquid, is an aqueous dispersion of an anionic rosin ester. This product is APEO-free and can be used as a tackifier for acrylic latex polymers in pressure-sensitive adhesives, waterborne adhesives,...展开 West Tech 3180 Dispersion, in the form of a milky white liquid, is an aqueous dispersion of an anionic rosin ester. This product is APEO-free and can be used as a tackifier for acrylic latex polymers in pressure-sensitive adhesives, waterborne adhesives, tapes, labels, and automotive coatings. It contains between 49-51% solids and promotes high peel and tack in waterborne pressure-sensitive adhesives. 收起
West Tech 3509 Dispersion West Tech Chemical Ltd West Tech 3509 Dispersion, in the form of a milky white liquid, is an aqueous dispersion of an anionic rosin ester. This product is APEO-free and can be used as a tackifier for acrylic latex polymers in pressure sensitive adhesives, waterborne adhesives,...展开 West Tech 3509 Dispersion, in the form of a milky white liquid, is an aqueous dispersion of an anionic rosin ester. This product is APEO-free and can be used as a tackifier for acrylic latex polymers in pressure sensitive adhesives, waterborne adhesives, tapes, labels, and automotive coatings. It contains between 54-56% solids and promotes high peel and tack in waterborne pressure-sensitive adhesives. 收起
West Tech 5180 Dispersion West Tech Chemical Ltd West Teech 5180 Dispersion, in the form of a milky white liquid, is an aqueous dispersion of an anionic rosin ester. This product is APEO-free and can be used as a tackifier for acrylic latex polymers in pressure-sensitive adhesives, tapes, labels, water...展开 West Teech 5180 Dispersion, in the form of a milky white liquid, is an aqueous dispersion of an anionic rosin ester. This product is APEO-free and can be used as a tackifier for acrylic latex polymers in pressure-sensitive adhesives, tapes, labels, waterborne adhesives, and automotive coatings. It enhances adhesion to polyolefin substrates and promotes high peel and tack in waterborne pressure sensitive adhesives. 收起
West Tech 6170 Dispersion West Tech Chemical Ltd West Tech 6170 Dispersion, in the form of a milky white liquid, is an aqueous dispersion of an anionic rosin ester. This product is APEO-free and can be used as a modifier for acrylic latexes in pressure sensitive adhesives, waterborne adhesives, tapes, ...展开 West Tech 6170 Dispersion, in the form of a milky white liquid, is an aqueous dispersion of an anionic rosin ester. This product is APEO-free and can be used as a modifier for acrylic latexes in pressure sensitive adhesives, waterborne adhesives, tapes, labels, and automotive coatings. It contains between 49-51% solids and promotes high peel and tack in waterborne pressure-sensitive adhesives. 收起
West Tech 6180 Dispersion West Tech Chemical Ltd West Tech 6180 Dispersion, in the form of a milky white liquid, is an aqueous dispersion of an anionic rosin ester. This product is APEO-free and can be used as a modifier for acrylic latexes in pressure-sensitive adhesives, tapes, labels, waterborne adh...展开 West Tech 6180 Dispersion, in the form of a milky white liquid, is an aqueous dispersion of an anionic rosin ester. This product is APEO-free and can be used as a modifier for acrylic latexes in pressure-sensitive adhesives, tapes, labels, waterborne adhesives, and automotive coatings. It promotes high peel and tack in waterborne pressure sensitive adhesives and contains between 49-51% solids. 收起
West Tech Ester Gum 10D West Tech Chemical Ltd West Tech Ester Gum 10D, in the form of a pale amber solid, is the glycerol ester of a partially dimerized rosin. This product can be used in contact adhesives, hot melt adhesives, solvent-borne or waterborne adhesives, and in graphic arts. It contains ...展开 West Tech Ester Gum 10D, in the form of a pale amber solid, is the glycerol ester of a partially dimerized rosin. This product can be used in contact adhesives, hot melt adhesives, solvent-borne or waterborne adhesives, and in graphic arts. It contains between 3 and 8 mg of potassium hydroxide per gram. 收起
West Tech Ester Gum 8D West Tech Chemical Ltd West Tech Ester Gum 8D, in the form of a pale yellow solid, is a glycerol ester of gum rosin. This product can be used in adhesives, inks, and coatings where minimum odor is a requirement. It contains between 3 and 8 mg of potassium hydroxide per gram.
West Tech Polymerized Rosin 140 West Tech Chemical Ltd West Tech Polymerized Rosin 140, in the form of a pale yellow, transparent solid, is a polymerized thermoplastic resin. This product is composed of dimeric acids and can be used in caulks, sealants, hot melt adhesives, solvent-borne adhesives, and pressu...展开 West Tech Polymerized Rosin 140, in the form of a pale yellow, transparent solid, is a polymerized thermoplastic resin. This product is composed of dimeric acids and can be used in caulks, sealants, hot melt adhesives, solvent-borne adhesives, and pressure-sensitive adhesives, among other uses. It contains between 130-145 mg of potassium hydroxide per gram. 收起
West Tech Polymerized Rosin 145 West Tech Chemical Ltd West Tech Polymerized Rosin 145, in the form of a pale yellow, transparent solid, is a polymerized thermoplastic rosin. This product contains dimeric acids that can be used in caulks, sealants, hot melt adhesives, pressure-sensitive adhesives, and tapes,...展开 West Tech Polymerized Rosin 145, in the form of a pale yellow, transparent solid, is a polymerized thermoplastic rosin. This product contains dimeric acids that can be used in caulks, sealants, hot melt adhesives, pressure-sensitive adhesives, and tapes, among other uses. It contains greater than 140 mg of potassium hydroxide per gram. 收起