| AC-21 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-21 is a modified amino saline primarily used as an adhesion promoter and comes as a light yellowish liquid. It can be used to enhance polymeric coatings, and as a binder to glass and metallic substrate. It can also be used as a coating material for epo...展开 AC-21 is a modified amino saline primarily used as an adhesion promoter and comes as a light yellowish liquid. It can be used to enhance polymeric coatings, and as a binder to glass and metallic substrate. It can also be used as a coating material for epoxy, silicone, acrylic and polyurethane. 收起 | |
| AC-62 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-62 is a N-β-aminoethylaminopropyl trimethoxysilane with the chemical formula of H2NC2H4NHC3H6Si(OCH3)3 and comes as a clear to slightly yellowish liquid. Primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62 can be used...展开 AC-62 is a N-β-aminoethylaminopropyl trimethoxysilane with the chemical formula of H2NC2H4NHC3H6Si(OCH3)3 and comes as a clear to slightly yellowish liquid. Primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62 can be used as an additive in foundry and abrasive thermosetting resin. 收起 | |
| AC-626 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-626 is an N,N Bis{3-(trimethoxysilyl)propyl} ethylene diamine with the chemical formula CH2NH(CH2)3Si(OCH3)3 and comes as a clear to slightly yellowish liquid. It is primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62...展开 AC-626 is an N,N Bis{3-(trimethoxysilyl)propyl} ethylene diamine with the chemical formula CH2NH(CH2)3Si(OCH3)3 and comes as a clear to slightly yellowish liquid. It is primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-626 can also be used as an additive in foundry and abrasive thermosetting resin. 收起 | |
| AC-63 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-63 is a γ-Methacryloxypropyl trimethoxysilane and comes as a clear, colorless liquid. Primarily used as an additive in mineral reinforced PET, AC-63 can be used to improve adhesion and coupling in free radical cured resin to inorganic glass fibers, cla...展开 AC-63 is a γ-Methacryloxypropyl trimethoxysilane and comes as a clear, colorless liquid. Primarily used as an additive in mineral reinforced PET, AC-63 can be used to improve adhesion and coupling in free radical cured resin to inorganic glass fibers, clay and silicas. 收起 | |
| AC-65 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-65 is a γ-Aminopropyl triethoxysilane with the chemical formula H2NC3H6Si(OC2H5)3 and comes as a clear to slightly yellowish liquid. Primarily used as a primer or additive in phenolic resin. It can be used as a pre-treatment in filler and pigments for ...展开 AC-65 is a γ-Aminopropyl triethoxysilane with the chemical formula H2NC3H6Si(OC2H5)3 and comes as a clear to slightly yellowish liquid. Primarily used as a primer or additive in phenolic resin. It can be used as a pre-treatment in filler and pigments for adhesive and sealant production. 收起 | |
| AC-66 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-66 is a γ-Glycidopropyl trimethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-66 can be used as an adhesion promotor in polymer ...展开 AC-66 is a γ-Glycidopropyl trimethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-66 can be used as an adhesion promotor in polymer to glass and metallic substrates. 收起 | |
| AC-661 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-661 is a γ-Glycidopropyl methyl dimethoxysilane with the chemical formula CH2OCHCH2OC3H6SiCH3(OCH3)2 and comes as a clear colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-661 can be used as an adhesion promotor i...展开 AC-661 is a γ-Glycidopropyl methyl dimethoxysilane with the chemical formula CH2OCHCH2OC3H6SiCH3(OCH3)2 and comes as a clear colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-661 can be used as an adhesion promotor in polymer to glass as well as in metallic substrates. 收起 | |
| AC-662 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-662 is a γ-Glycidopropyl methyl diethoxysilane with the chemical formula of CH2OCHCH2OC3H6SiCH3(OC2H5)2 and comes as clear colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-662 can be used as an adhesion...展开 AC-662 is a γ-Glycidopropyl methyl diethoxysilane with the chemical formula of CH2OCHCH2OC3H6SiCH3(OC2H5)2 and comes as clear colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-662 can be used as an adhesion promoter to enhance polymer coating as well as a binder to glass and metal substrates. 收起 | |
| AC-66(E) | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-66(E) is a γ-Glycidoxypropyl triethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH5)3 and comes as a clear, colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-66(E) can be used as an adhesion pro...展开 AC-66(E) is a γ-Glycidoxypropyl triethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH5)3 and comes as a clear, colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-66(E) can be used as an adhesion promotor to enhance polymer coating and as a binder to glass and metal substrates. 收起 | |
| AC-67 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic e...展开 AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic emulsions as well as used for filler in glass fiber surface treatments. 收起 | |
| AC-68 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-68 is a β-(3,4-Epoxycyclohexyl)ethyltriethoxysilane with the chemical structure CH2CH2Si(OC2H5)3 and comes as a clear, transparent liquid. Primarily used in the production of adhesives and sealants, AC-68 can be used as an additive to improve acrylic e...展开 AC-68 is a β-(3,4-Epoxycyclohexyl)ethyltriethoxysilane with the chemical structure CH2CH2Si(OC2H5)3 and comes as a clear, transparent liquid. Primarily used in the production of adhesives and sealants, AC-68 can be used as an additive to improve acrylic emulsion in adhesives as well as a filler in glass fiber surface treatments. 收起 | |
| AC-70 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-70 is a Vinyltri tert-butyl peroxide silane with the chemical formula of C14H30O6Si and comes as a yellowish liquid. Primarily used as an adhesive and sealant, it is used extensively in the rubber industry. AC-70 can bond to other rubber, silicon, and ...展开 AC-70 is a Vinyltri tert-butyl peroxide silane with the chemical formula of C14H30O6Si and comes as a yellowish liquid. Primarily used as an adhesive and sealant, it is used extensively in the rubber industry. AC-70 can bond to other rubber, silicon, and metal substrates. 收起 | |
| AC-703 Anionic Fluorocarbon Surfactant | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-703 Anionic Fluorocarbon Surfactant is an anionic surfactant that is primarily used as a wetting, dispersing and leveling agent in paints, inks, dyes and leather production. This product has a high temperature and alkali resistance and can be used in s...展开 AC-703 Anionic Fluorocarbon Surfactant is an anionic surfactant that is primarily used as a wetting, dispersing and leveling agent in paints, inks, dyes and leather production. This product has a high temperature and alkali resistance and can be used in strong base or strong oxidant media. It is a brownish, clear liquid in appearance. 收起 | |
| AC-75 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-75 is a Vinyl triethoxysilane with the chemical structure CH2=CHSi(OC2H5)3, and comes as a colorless transparent liquid. Primarily used in the production of vinyl and acrylic co-polymers, AC-75 can be used as an adhesion promoter in polymers for glass ...展开 AC-75 is a Vinyl triethoxysilane with the chemical structure CH2=CHSi(OC2H5)3, and comes as a colorless transparent liquid. Primarily used in the production of vinyl and acrylic co-polymers, AC-75 can be used as an adhesion promoter in polymers for glass / metallic substrates. 收起 | |
| AC-76 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-76 is a Vinyltriisopropoxysilane with the chemical formula C11H24O3Si and comes as a clear and colorless liquid. It is primarily used as a monomer in acrylic emulsions in the production of paints and coatings. | |
| AC-77 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-77 is a Vinyltris-(2-methoxyethoxysilane) with the chemical formula H2C=CHSi(OCH2CH2OCH3)3 and comes as a clear liquid. Primarily used as a cross-linker in vinyl-acrylic emulsion systems, AC-77 can be used as an additive mineral filled polymers and oth...展开 AC-77 is a Vinyltris-(2-methoxyethoxysilane) with the chemical formula H2C=CHSi(OCH2CH2OCH3)3 and comes as a clear liquid. Primarily used as a cross-linker in vinyl-acrylic emulsion systems, AC-77 can be used as an additive mineral filled polymers and other rubber chemicals as an adhesion promoter for paints and coatings. 收起 | |
| ADDAPT® AS 400 | ADDAPT Chemicals BV | ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings. | |
| ADDAPT® BioWet™ 25 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a polyhydroxy amide in water. It is used as a solvent-free wetting agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is non-foaming, biodegradable, and it improves pigment grinding. | |
| ADDAPT® BioWet™ 35 | ADDAPT Chemicals BV | ADDAPT® BioWet™ 35 is a blend of polyalkylene glycols, dispersants, and polyhydroxy amide. It is used as a wetting/leveling agent in paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is biodegradable, solvent-free, no...展开 ADDAPT® BioWet™ 35 is a blend of polyalkylene glycols, dispersants, and polyhydroxy amide. It is used as a wetting/leveling agent in paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is biodegradable, solvent-free, non-foaming, and it improves pigment grinding. 收起 | |
| ADDAPT® BioWet™ 45 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pi...展开 ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pigment grinding. 收起 | |
| ADDAPT® BioWet™ 450C | ADDAPT Chemicals BV | ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foamin...展开 ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foaming, completely soluble in water, and improves pigment grinding. 收起 | |
| ADDAPT® BioWet™ 75 | ADDAPT Chemicals BV | ADDAPT® BioWet™ 75 is a polyhydroxy amide in water. It is used as a biodegradable wetting and leveling agent for coatings, lacquers, printing inks, adhesives, and cleaning agents. This product is non-foaming, improves pigment grinding, and has anti-corros...展开 ADDAPT® BioWet™ 75 is a polyhydroxy amide in water. It is used as a biodegradable wetting and leveling agent for coatings, lacquers, printing inks, adhesives, and cleaning agents. This product is non-foaming, improves pigment grinding, and has anti-corrosion properties. 收起 | |
| ADDAPT® DISP™ 400 | ADDAPT Chemicals BV | ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in pai...展开 ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. 收起 | |
| ADDAPT® DISP™ 500 | ADDAPT Chemicals BV | ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...展开 ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. 收起 | |
| ADDAPT® DISP™ 600 | ADDAPT Chemicals BV | ADDAPT® DISP™ 600 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for titanium dioxide, mineral pigments, fillers, colorants, and reactive pigments. This product is used in paint, printing in...展开 ADDAPT® DISP™ 600 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for titanium dioxide, mineral pigments, fillers, colorants, and reactive pigments. This product is used in paint, printing ink, adhesives, paper coatings, and concrete. 收起 | |
| ADDAPT® DISP™ 800 | ADDAPT Chemicals BV | ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in...展开 ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. 收起 | |
| ADDAPT® DISP™ 900 | ADDAPT Chemicals BV | ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...展开 ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. 收起 | |
| ADDAPT® Foamstop™ CC 11 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, pri...展开 ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ EM 19 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, ...展开 ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ MP 51N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor poli...展开 ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ MP 51P | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 51P is a powder based organic defoamer made from a combination of mineral oils and silicates. This product is used in cement, starch, paint, adhesives, plasters, and powdered detergents. | |
| ADDAPT® Foamstop™ MP 72 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This ...展开 ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, adhesives, printing inks, floor polish, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ SL 10 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid tha...展开 ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid that is easily emulsifiable and is used in paint, printing ink, adhesives, and sewage treatment, among other applications. 收起 | |
| ADDAPT® Foamstop™ SL 30 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ...展开 ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ink, adhesives, and sewage treatment, among other applications. 收起 | |
| ADDAPT® Foamstop™ VF 10N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, prin...展开 ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ VF 35N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 35N is a proprietary blend of oils with PAGs and surface active components. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, plaster, adhesives, l...展开 ADDAPT® Foamstop™ VF 35N is a proprietary blend of oils with PAGs and surface active components. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, plaster, adhesives, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® Foamstop™ VF 60 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 60 is a proprietary blend of oils with PAGs and surface-active components. It is an easily emulsifiable foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product is used in paint, plaster...展开 ADDAPT® Foamstop™ VF 60 is a proprietary blend of oils with PAGs and surface-active components. It is an easily emulsifiable foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product is used in paint, plaster, adhesives, lubricants, and waste-water treatment. 收起 | |
| ADDAPT® PolySurF™ ACE | ADDAPT Chemicals BV | ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV ...展开 ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV stability. 收起 | |
| ADDAPT® PolySurF™ HP | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing in...展开 ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing inks, and adhesives. 收起 | |
| ADDAPT® PolySurF™ HPH | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal an...展开 ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal and has flame retardant properties. 收起 | |
| ADDAPT® PolySurF™ HPL | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This p...展开 ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This product is used in paints, lacquers, printing inks, and adhesives. 收起 | |
| ADDAPT® PolySurF™ HPm | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.Thi...展开 ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.This product is used in paints, lacquers, printing inks, and adhesives. 收起 | |
| APMS Fluid A 1000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 1000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mod...展开 APMS Fluid A 1000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. 收起 | |
| APMS Fluid A 10000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 10000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mo...展开 APMS Fluid A 10000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. 收起 | |
| APMS Fluid A 2000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 2000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mod...展开 APMS Fluid A 2000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. 收起 | |
| APMS Fluid A 5000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 5000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mod...展开 APMS Fluid A 5000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. 收起 | |
| BLUESIL PRIM 10073 | Elkem Silicones | BLUESIL PRIM 10073 is a product intended to improve the adhesion of BLUESIL one-component and two-component elastomers to metals and certain painted surfaces. The product is available as a ready-to-use solution of reactants diluted in a solvent. | |
| BLUESIL PRIM 12076 | Elkem Silicones | BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactan...展开 BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactants diluted in a solvent. 收起 | |
| BLUESIL RES 8152P | Elkem Silicones | BLUESIL RES 8152P is a 50% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 8170P | Elkem Silicones | BLUESIL RES 8170P is used to manufacture rigid insulators in the high pressure process: laminates based on glass fabric, mica (mica paper), mica/glass composite fabric and asbestos. It offers outstanding mechanical properties. | |
| BLUESIL RES 8360M | Elkem Silicones | BLUESIL RES 8360M is a methyl silicone resin supplied as a solution in toluene and intended for the manufacture of flexible insulants. | |
| BLUESIL SLT 10B OFF WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10B PVC WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10T OFF WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| BLUESIL SLT 10T PVC WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| BLUESIL SLT 3B BLACK | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3B TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3B WHITE | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3E BLACK | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E WHITE | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3S TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 3S WHITE | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 4S TRANSCLUCENT | Elkem Silicones | BLUESIL SLT 4S is a one-component, moisture-cure silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, low modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT AQUARIUM BLACK | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起 | |
| BLUESIL SLT AQUARIUM TRANSLUCENT | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起 | |
| BLUESIL SLT NOVART S TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to...展开 BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to give a flexible seal of low modulus. 收起 | |
| BLUESIL SLT NOVART TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起 | |
| BLUESIL SLT NOVART WHITE | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起 | |
| BLUESIL SLT VEC 90 BLACK | Elkem Silicones | BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, fle...展开 BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, flexible seal. 收起 | |
| BLUESIL SLT VEC 99A BLACK | Elkem Silicones | BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and ...展开 BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and adhesion properties. Its advantage, relative to conventional two-component elastomers lies in the large tolerance relative to the accuracy of the ratio A/B. BLUESIL SLT VEC 99 has been specially designed to meet requirements in Structural Glazing applications. 收起 | |
| BLUESIL SLT VI 10 BLACK | Elkem Silicones | BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with h...展开 BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with high mechanical performance levels. 收起 | |
| D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
| D-31 | BlueSky Chemical Co., Ltd. | D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants. | |
| D-32 | BlueSky Chemical Co., Ltd. | D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...展开 D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
| D-33 | BlueSky Chemical Co., Ltd. | D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...展开 D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...展开 D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. 收起 | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| D-36 | BlueSky Chemical Co., Ltd. | D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml. | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...展开 D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...展开 D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...展开 D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| Fluororesin | Ark (Fogang) Chemicals Industry Co., Ltd. | Fluororesin is a brownish, clear liquid made with many hydroxyls. It has many applications in use as a lubricant, fiber-treatment, release, water-proofing agents as well as an antifouling, non-adheasive and optical coating agent. It can be used in paints ...展开 Fluororesin is a brownish, clear liquid made with many hydroxyls. It has many applications in use as a lubricant, fiber-treatment, release, water-proofing agents as well as an antifouling, non-adheasive and optical coating agent. It can be used in paints which are weather durable, antifouling or salt fog resistant. 收起 | |
| LT-151 | BlueSky Chemical Co., Ltd. | LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml. | |
| LT-530 | BlueSky Chemical Co., Ltd. | LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml. | |
| LT-540 | BlueSky Chemical Co., Ltd. | LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...展开 LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. 收起 | |
| LT-550 | BlueSky Chemical Co., Ltd. | LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...展开 LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. 收起 | |
| LT-560 | BlueSky Chemical Co., Ltd. | LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...展开 LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. 收起 | |
| LT-590 | BlueSky Chemical Co., Ltd. | LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...展开 LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. 收起 | |
| LT-602 | BlueSky Chemical Co., Ltd. | LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...展开 LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
| LT-792 | BlueSky Chemical Co., Ltd. | LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml. | |
| SD1090A | ZheJiang SanDing Group | SD1090A is an off-white refined natural bentonite inorganic binder, rheological additive, with good adhesion, colloid performance, and high viscosity that is used in bonding cement, ceramic, and more. | |
| Tetramethyldisiloxane | Ark (Fogang) Chemicals Industry Co., Ltd. | Tetramethyldisiloxane is a clear and colorless liquid with the chemical structure C4H14OSi2. It is widely used as a silicone intermediate in the production of high performance silicone surfactants, liquid silicone rubber, modified silicone oils, plastics ...展开 Tetramethyldisiloxane is a clear and colorless liquid with the chemical structure C4H14OSi2. It is widely used as a silicone intermediate in the production of high performance silicone surfactants, liquid silicone rubber, modified silicone oils, plastics and other resins. 收起 | |
| Q-FOG Cyclic Corrosion Tester | Q-Lab, Inc. | Q-FOG® cyclic corrosion chambers from Q-Lab can run traditional salt spray, Prohesion, and most cyclic automotive tests. Q-FOG chambers are available in two sizes to fulfill a wide range of testing requirements. Q-FOG chambers are constructed of reinforc...展开 Q-FOG® cyclic corrosion chambers from Q-Lab can run traditional salt spray, Prohesion, and most cyclic automotive tests. Q-FOG chambers are available in two sizes to fulfill a wide range of testing requirements. Q-FOG chambers are constructed of reinforced fiberglass and there is no internal steel framework to corrode. They feature precise control of fog volume through the use of a variable speed peristaltic pump. Variable humidity control and shower capabilities are available as options. A remarkably simple user interface allows for easy user programming and operation. The Q-FOG controller includes complete self-diagnostics, including warning messages, routine service reminders, and safety shut down. Purified water is required for proper operation. 收起 | |
| Q-SUN Xenon Test Chambers | Q-Lab, Inc. | Q-SUN® xenon arc chambers reproduce the damage caused by full-spectrum sunlight and rain. In a few days or weeks, Q-SUN testers can reproduce the damage that occurs over months or years outdoors. Q-SUN xenon arc chambers are available in three different ...展开 Q-SUN® xenon arc chambers reproduce the damage caused by full-spectrum sunlight and rain. In a few days or weeks, Q-SUN testers can reproduce the damage that occurs over months or years outdoors. Q-SUN xenon arc chambers are available in three different models: the tabletop Xe-1, and full-sized Xe-2 and Xe-3. Each air-cooled tester features Q-Lab's renowned reliability and ease of maintenance. All testers have standard datalogging via ethernet, a variety of standard sample holders and a remarkably simple user interface available in five languages. 收起 | |
| QUV Accelerated Weathering Tester | Q-Lab, Inc. | Sunlight and moisture cause millions of dollars of material damage every year. The QUV® accelerated weathering tester tests materials by exposing them to alternating cycles of UV light and moisture at controlled, elevated temperatures. In a few days or we...展开 Sunlight and moisture cause millions of dollars of material damage every year. The QUV® accelerated weathering tester tests materials by exposing them to alternating cycles of UV light and moisture at controlled, elevated temperatures. In a few days or weeks, the QUV tester can reproduce the damage that occurs over months or years outdoors. With thousands of testers in service worldwide, the QUV tester is the world's most widely used weathering tester. QUV testers are available in four different models: QUV/basic, QUV/se, QUV/spray, and QUV/cw. Each air-cooled tester featured Q-Lab's renowned reliability and ease of maintenance. All testers have standard datalogging via ethernet and/or USB, a variety of standard sample holders, automatic fault recognition and alarms, automatic shut-down timer, and a remarkably simple user interface available in five languages. 收起 |
