| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展开 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起 | |
| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...展开 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. 收起 | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展开 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起 | |
| Antioxidant SN-1 | Tiarco Chemical | Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds...展开 Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds, and the maximum benefits are best noticed when used in combination with a primary antioxidant in natural and synthetic polymers. It is used in light colored or black compounds such as carpet backing foams, scrim adhesives, SBR latex stabilization, rubber based adhesives, footwear compounds and mechanical goods, and more. 收起 | |
| D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
| D-31 | BlueSky Chemical Co., Ltd. | D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants. | |
| D-32 | BlueSky Chemical Co., Ltd. | D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...展开 D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
| D-33 | BlueSky Chemical Co., Ltd. | D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...展开 D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...展开 D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. 收起 | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| D-36 | BlueSky Chemical Co., Ltd. | D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml. | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...展开 D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...展开 D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...展开 D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展开 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展开 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-117 | DCC (Dairen Chemical Corp.) | DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展开 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起 | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展开 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展开 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展开 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起 | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起 | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起 | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起 | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起 | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展开 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起 | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展开 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起 | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...展开 DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. 收起 | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展开 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起 | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展开 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起 | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...展开 DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. 收起 | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...展开 DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. 收起 | |
| DA-371 | DCC (Dairen Chemical Corp.) | DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...展开 DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. 收起 | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...展开 DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...展开 DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...展开 DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. 收起 | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....展开 DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-691 | DCC (Dairen Chemical Corp.) | DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...展开 DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. 收起 | |
| DA-901 | DCC (Dairen Chemical Corp.) | DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...展开 DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. 收起 | |
| DA-908 | DCC (Dairen Chemical Corp.) | DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...展开 DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. 收起 | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...展开 DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| LT-151 | BlueSky Chemical Co., Ltd. | LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml. | |
| LT-530 | BlueSky Chemical Co., Ltd. | LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml. | |
| LT-540 | BlueSky Chemical Co., Ltd. | LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...展开 LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. 收起 | |
| LT-550 | BlueSky Chemical Co., Ltd. | LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...展开 LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. 收起 | |
| LT-560 | BlueSky Chemical Co., Ltd. | LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...展开 LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. 收起 | |
| LT-590 | BlueSky Chemical Co., Ltd. | LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...展开 LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. 收起 | |
| LT-602 | BlueSky Chemical Co., Ltd. | LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...展开 LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
| LT-792 | BlueSky Chemical Co., Ltd. | LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml. | |
| n-Propanol | DCC (Dairen Chemical Corp.) | n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether...展开 n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether. n-Propanol is used in solvents, as an intermediate chemical for synthesis, industrial coatings, adhesives, and printing inks. 收起 | |
| Octocure 462 | Tiarco Chemical | Octocure 462 is an aqueous zinc oxide dispersion readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing SBR and natural latex rubber. | |
| Octocure 487 | Tiarco Chemical | Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product m...展开 Octocure 487 is an aqueous anionic dispersion of tetramethylthiuram disulfide. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for a sulfurless cure. This product may also be used at lower concentrations as a slow precure accelerator in natural latex. 收起 | |
| Octocure 530 | Tiarco Chemical | Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accel...展开 Octocure 530 is an aqueous anionic dispersion of diphenylguanidine that functions as a ready-to-use accelerator in latex compounding. It is wet milled to a fine particle size for maximum activity. It works in low concentrations as a strong secondary accelerator in SBR, neoprene, and nitrile latices. This product is typically used as an activator for MBT and other thiazole accelerators, or in conjunction with dithiocarbamates or thiocarbanilides. 收起 | |
| Octocure 551 | Tiarco Chemical | Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usu...展开 Octocure 551 is an aqueous anionic dispersion of N,N'-diphenylthiourea. This milled, 50% active thiocarbanalide dispersion is used in neoprene latex, natural rubber latex, and cement applications as a fast-curing accelerator. For neoprene latex, it is usually used in conjunction with diphenyl guanidine. 收起 | |
| Octocure 573 | Tiarco Chemical | Octocure 573 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber. | |
| Octocure 803 | Tiarco Chemical | Octocure 803 is an aqueous zinc oxide dispersion that can be readily incorporated directly into latex emulsion compounds. It is based on French process zinc oxide. This product is commonly used for pigmenting and vulcanizing latex rubber. | |
| Octocure ZBZ-42 | Tiarco Chemical | Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary acc...展开 Octocure ZBZ-42 is an aqueous anionic dispersion of zinc dibenzyldithiocarbamate. It is 42% active and functions as a ready-to-use accelerator for latex compounding. It is typically used in SBR and natural latex compounds in conjunction with secondary accelerators such as ZMBT. Octocure ZBZ-42 is ideal for vulcanization processes where the formation of volatile nitrosoamines needs to be reduced. 收起 | |
| Octocure ZDB-100 | Tiarco Chemical | Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This prod...展开 Octocure ZDB-100 is a white to off-white powder composed of zinc di-n-butyldithiocarbamate. It functions as a primary accelerator for natural and synthetic polymers. It can be used in most natural rubber compounds for fast cure and high modulus. This product can also be applied in low doses in non-curing natural and SBR adhesive compounds as a non-discoloring antioxidant. 收起 | |
| Octocure ZDB-50 | Tiarco Chemical | Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus...展开 Octocure ZDB-50 is an aqueous dispersion of zinc di-n-butyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. This product is commonly used in SBR and natural latex compounds for fast cure and high modulus. 收起 | |
| Octocure ZDB-50 CF | Tiarco Chemical | Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and h...展开 Octocure ZDB-50 CF is an aqueous anionic dispersion of zinc di-n-butyldithiocarbamate. Casein free and 50% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds for fast cure and high modulus. This product can also be used at low doses in noncuring natural and SBR latex compounds as a non-discoloring antioxidant. 收起 | |
| Octocure ZDE-50 | Tiarco Chemical | Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts z...展开 Octocure ZDE-50 is an aqueous anionic dispersion of zinc diethyldithiocarbamate. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used in SBR and natural latex compounds in conjunction with equal amounts zinc mercaptobenzothiazole. 收起 | |
| Octocure ZDIB-50 | Tiarco Chemical | Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high mo...展开 Octocure ZDIB-50 is an aqueous liquid dispersion of zinc diisobutyldithiocarbamate. It is 50% active and functions as a ready-to-use ultra-accelerator for latex compounding. It is typically used in SBR and natural latex compounds for fast cure and high modulus. As a secondary accelerator, this product works well with thiurams, thiazoles, and guanidines. Octocure ZDIB-50 may be used at low levels to increase cure rates of slower curing systems. It also serves as an effective free-radical emulsion polymerization shortstop in styrene-butadiene rubber (SBR) and acrylonitrile butadiene rubber (NBR) elastomer production. 收起 | |
| Octocure ZDM-50 | Tiarco Chemical | Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suit...展开 Octocure ZDM-50 is an aqueous anionic dispersion of zinc dimethyldithiocarbamate. It is 50 % active and functions as a ready-to-use accelerator for latex compounding. It provides moderately fast curing with good aging properties. This product is well suited for use as an additive in the production of latex and latex based products. 收起 | |
| Octocure ZMBT-50 | Tiarco Chemical | Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This...展开 Octocure ZMBT-50 is an aqueous anionic dispersion of zinc mercaptobenzothiazole. It is 50% active and functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. 收起 | |
| Octocure ZMBT-50 CF | Tiarco Chemical | Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithioca...展开 Octocure ZMBT-50 CF is an aqueous anionic dispersion of zinc mercaptobenzothiazole. Casein free and 51% active, it functions as a ready-to-use accelerator for latex compounding. It is commonly used as a secondary accelerator in conjunction with a dithiocarbamate. This product is well suited for use as an additive in the production of latex and latex based products. 收起 | |
| Octoguard FR-11 DF | Tiarco Chemical | Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...展开 Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 收起 | |
| Octoguard FR-13 DF | Tiarco Chemical | Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...展开 Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 收起 | |
| Octolite 424-50 | Tiarco Chemical | Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant pro...展开 Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in synthetic and natural latex polymers. This product is recommended for use in carboxylated SBR latex compounds and adhesives. 收起 | |
| Octolite 497 | Tiarco Chemical | Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat...展开 Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat, ultraviolet light, and oxidation. This dispersion is milled to a fine particle size for maximum activity. Octolite 497 is well suited for use in the production of food packaging adhesives and with repeated use rubber products. 收起 | |
| Octolite 544 CF | Tiarco Chemical | Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, a...展开 Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, and other latex systems. It is also particularly beneficial in protecting against degradation by trace metals such as copper and manganese. 收起 | |
| Octolite 640 | Tiarco Chemical | Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protectio...展开 Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protection in SBR, natural, and neoprene latex polymers. Octolite 640 is particularly useful for providing superior protection against high-temperature degradation in certain latex polymer compounds. 收起 | |
| Octolite 668 | Tiarco Chemical | Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH ran...展开 Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH range for direct addition to latex. It exhibits low volatility and excellent frothability. Octolite 668 is also highly effective in polychloroprene polymers, providing protection against degradation due to heat, light, and oxygen. 收起 | |
| Octolite 809 | Tiarco Chemical | Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-...展开 Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-milled to a fine particle size for maximum activity. Octolite 809 is essentially non-staining but can cause some slight pink discoloration in certain applications. 收起 | |
| Octolite AO-50 | Tiarco Chemical | Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protectio...展开 Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protection to synthetic and natural latex polymers. Octolite AO-50 is ideally suited for use in carboxylated SBR latex compounds and adhesives. 收起 | |
| Octolite WL | Tiarco Chemical | Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against ...展开 Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against the effects of heat, ultraviolet light, and oxidation. Octolite WL is well suited for use in the production of food packaging adhesives and with repeated use rubber products. 收起 | |
| Octosol 730 | Tiarco Chemical | Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce q...展开 Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce quality-frothed adhesives and latex foams. 收起 | |
| Octotint 790 | Tiarco Chemical | Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aq...展开 Octotint 790 is a water-based dispersion of highly refined brown pigments of extremely fine particle size and purity, with properties tailored for the specific applications of tinting jute adhesives. It can also be used with good compatibility in other aqueous formulations where its characteristic color would be desired. 收起 |
