| APG® 325 UP | BASF |
|
用于家居、工业公共设施领域的清洁产品的性能的提升，赋予产品优异的清洁及稳定性。
Compliance Highlights Available
|
|
| Arlypon® VPC | BASF |
脂肪醇聚氧乙烯醚及烷基胺聚氧乙烯醚的混合物。在 25°C时为澄清液体。可以用于盐酸、磷酸、柠檬酸、氨基磺酸等溶液的增稠。
Compliance Highlights Unavailable
|
||
| Degressal® SD 20 | BASF |
Degressal® SD 20 is a fatty alcohol alkoxylate with approximately 100% active content. It is very suitable for silicon-free foam suppressors for Home Care detergents and I&I cleaning. This product is supplied as a clear, yellowish liquid.
Compliance Highlights Unavailable
|
||
| Degressal® SD 40 | BASF |
Degressal® SD 40 is a phosphoric ester with approximately 100% active content. It is very suitable for silicon-free foam suppressors for Home Care detergents and I&I cleaning. This product is supplied as a clear, colourless, or yellowish liquid.
Compliance Highlights Unavailable
|
||
| Dehydem® Supra | BASF |
Dehydem® Supra is an alkyl polyalkylene glycol ether with approximately 90% active content. It is your professional partner for a multitude of I&I cleaning tasks. This product provides smart and effective foam control even at low temperatures while provid...展开
Dehydem® Supra is an alkyl polyalkylene glycol ether with approximately 90% active content. It is your professional partner for a multitude of I&I cleaning tasks. This product provides smart and effective foam control even at low temperatures while providing visible cleaning benefits. Because it is easy to formulate in water-based solutions, Dehydem® Supra provides versatility for a wide range of formulations. 收起
Compliance Highlights Unavailable
|
||
| Dehydol® LT 7 | BASF |
用于制备羊毛织物洗液及轻垢型清洁剂的脂肪醇。
Compliance Highlights Available
|
||
| Dehydol® LT 8 | BASF |
C12-C18脂肪醇聚氧乙烯(8)醚
Compliance Highlights Available
|
||
| Dehypon® 2555 | BASF |
具有极佳消泡性的表活剂的混合物，在络合物，如葡萄糖酸盐的存在下可以溶于50％的氢氧化钠溶液。
Compliance Highlights Unavailable
|
||
| Dehypon® 2574 | BASF |
具有极佳抑泡性能的非离子表活剂，用于金属处理的喷射型及浸渍型配方。
Compliance Highlights Unavailable
|
||
| Dehypon® E 124-90 | BASF |
具有极佳低发泡性及优异润湿性的非离子表活剂，主要用于工业及家居的催干剂。
Compliance Highlights Unavailable
|
||
| Dehypon® E 127 | BASF |
改性脂肪醇聚乙二醇醚。
Compliance Highlights Unavailable
|
||
| Dehypon® G 2084 | BASF |
用于各种工业领域的低发泡性表活剂。
Compliance Highlights Available
|
||
| Dehypon® GRA | BASF |
具有优异润湿性能的低发泡型表活剂颗粒，主要用于生产多功能的自动餐具洗涤粉及片剂中的漂洗助剂。
Compliance Highlights Unavailable
|
||
| Dehypon® GRA | BASF |
DEHYPON® GRA是具有优异润湿性能的粒状、低泡型表活剂。用于自动洗碗机用结合清洗、漂洗及含盐分的多功能洗涤粉或洗涤片产品的漂洗助剂。
Compliance Highlights Unavailable
|
||
| Dehypon® KE 3447 | BASF |
具有极佳低发泡性及优异润湿性的非离子表活剂，用于提升对硬表面的润湿能力，同时也可用于清洁剂产品中。
Compliance Highlights Unavailable
|
||
| Dehypon® LS 104 | BASF |
极佳润湿能力的低泡性表活剂。在酸性及腐蚀性溶液中有极佳的稳定性，与各种阴离子、阳离子及非离子表活剂混溶。
Compliance Highlights Available
|
||
| Dehypon® LS 104 L | BASF |
润湿力更优异的低发泡性表活剂，适用于酸性及中性的水洗型澄清配方的产品中。
Compliance Highlights Available
|
||
| Dehypon® LS 24 | BASF |
低发泡型EO/PO共聚脂肪醇，适用于低发泡需求的清洁去污剂。
Compliance Highlights Available
|
||
| Dehypon® LS 36 | BASF |
低发泡型EO/PO共聚脂肪醇，适用于低发泡需求的清洁去污剂。
Compliance Highlights Available
|
||
| Dehypon® LS 45 CC | BASF |
在酸碱性环境中充分稳定的低泡性非离子表活剂，用于碳酸盐、硅酸盐及磷酸盐等碱性体系；磷酸、柠檬酸等酸性体系。
Compliance Highlights Available
|
||
| Dehypon® LS 531 | BASF |
用于家居及工业公共设施的清洗剂的低泡性清洁剂，具有极佳的消泡能力及优异的润湿能力。
Compliance Highlights Available
|
||
| Dehypon® LS 54 | BASF |
低发泡型EO/PO共聚脂肪醇
Compliance Highlights Available
|
||
| Dehypon® LST 254 | BASF |
低发泡性的非离子表活剂，可以抑制泡沫的产生，尤为适用于瓶类首次清洗的产品中。
Compliance Highlights Unavailable
|
||
| Dehypon® LT 054 | BASF |
适用于基于苛性钠的粉状配方的非离子、低发泡型表活剂。
Compliance Highlights Available
|
||
| Dehypon® LT 104 | BASF |
具有优异润湿能力的低泡性表活剂，可用于低泡性的工业清洁剂、机用餐具洗涤剂及配方中含有氢氧化钠或磷酸的这种传统脂肪醇聚氧乙烯醚表活剂在储存过程中不够稳定这样的体系中。
Compliance Highlights Available
|
||
| Dehypon® LT 104 L | BASF |
润湿力更优异的低发泡性表活剂。
Compliance Highlights Available
|
||
| Dehypon® O 054 | BASF |
改性脂肪醇聚乙二醇醚。
Compliance Highlights Available
|
||
| Dehypon® OCP 502 | BASF |
用于碱性洗液制备的极为理想的消泡剂。
Compliance Highlights Available
|
||
| Dehypon® WET | BASF |
用于家居及公共设施硬表面清洁的低泡型表活剂。
Compliance Highlights Unavailable
|
||
| Dehypound® VTS | BASF |
Dehypound® VTS is a silicone-replacement technology designed for Car Care applications. It is listed on EPA’s Safer Chemical Ingredients List, and is also suitable for Direct Release applications. Compared with silicones, it provides comparable tire shine...展开
Dehypound® VTS is a silicone-replacement technology designed for Car Care applications. It is listed on EPA’s Safer Chemical Ingredients List, and is also suitable for Direct Release applications. Compared with silicones, it provides comparable tire shine, better streak-free cleaning performance in rinse-aids, and better cleaning performance in interior-cleaning applications. 收起
Compliance Highlights Unavailable
|
||
| Dehypound® W 07 | BASF |
用以预湿润湿巾制备的浓缩液，可清洁任何的硬表面。
Compliance Highlights Unavailable
|
||
| Dehyquart® AU-46 | BASF |
用于织物柔软剂原料的季铵盐化合物。
Compliance Highlights Available
|
||
| Dehyquart® CSP | BASF |
用于汽车护理的特殊阳离子表活剂。
Compliance Highlights Unavailable
|
||
| Demelan® 1990 | BASF |
用于发泡性粘稠漂白剂添加剂的表活剂的混合物，赋予产品清洁及发泡性能。
Compliance Highlights Unavailable
|
||
| Demelan® AU 39 BIO | BASF |
具有优异脱脂性能的阳离子表活剂，极易生物降解。
Compliance Highlights Unavailable
|
||
| Demelan® CS-30 - Ready to Use Coconut Soap | BASF |
|
极低色泽的透明液体。在配方中稳定性好，成品储存后无需黄化处理。没有气味，与各种香精有着良好的配伍性。可作为重垢和液体轻垢洗涤剂的添加剂和粘性泡沫增白剂。
Compliance Highlights Unavailable
|
|
| Deriphat® 160 C | BASF |
用于清洁产品的两性表面活性剂。在硬水和软水中都显示了良好的发泡性能。
Compliance Highlights Available
|
||
| Euperlan® Eco | BASF |
Euperlan® Eco is a 43% biobased† and moderately biodegradable* opacifier. It is a starch polymer with styrene and methacrylic acid. It is a milky, low viscous dispersion at room temperature.
Compliance Highlights Unavailable
|
||
| Euperlan® HCO | BASF |
超级方便的乳浊剂，苯乙烯/丙烯酸共聚物及非离子表活剂的分散液，不含防腐剂。
Compliance Highlights Unavailable
|
||
| Glucopon® 215 UP | BASF |
|
在腐蚀性剂及盐溶液中具有优异的稳定性及溶解性。在盐溶液、碱液及高浓度表活体系中具有优异的增稠能力。
Compliance Highlights Available
|
|
| Glucopon® 225 DK | BASF |
|
赋予各种清洁类产品优异的硬表面清洁性能及制造工艺简洁的非离子表活剂。具有极佳的润湿性、分散性及降低表面张力，从而赋予产品更强的祛污力及乳化能力。
Compliance Highlights Available
|
|
| Glucopon® 425 N/HH | BASF |
赋予表面清洁产品润湿、渗透及清洁性能的水溶液。
Compliance Highlights Available
|
||
| Glucopon® 50 G | BASF |
颗粒状的烷基葡糖苷，用于清洁产品。
Compliance Highlights Unavailable
|
||
| Glucopon® 600 CSUP | BASF |
|
具有极佳润湿、清洁、去污性能的水分散液。适用于餐具洗涤剂、衣物洗涤剂及各种清洁产品配方。
Compliance Highlights Available
|
|
| Glucopon® 650 EC | BASF |
|
极佳餐具洗涤及清洁性能的水溶液。
Compliance Highlights Available
|
|
| Lutensol® TO 10 | BASF |
Lutensol® TO 10 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...展开
Lutensol® TO 10 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 10 is a soft, slightly yellowish paste. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 109 | BASF |
Lutensol® TO 109 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as...展开
Lutensol® TO 109 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 109 is a clear liquid at 23°C. It consists of approx. 85% Lutensol® TO 10 and approx. 15% water. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 12 | BASF |
Lutensol® TO 12 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...展开
Lutensol® TO 12 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 12 is a soft, slightly yellowish paste. 收起
Compliance Highlights Available
|
||
| Lutensol® TO 129 | BASF |
Lutensol® TO 129 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as...展开
Lutensol® TO 129 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 129 is a clear liquid at 23°C. It consists of approx. 85% Lutensol® TO 12 and approx. 15% water. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 15 | BASF |
Lutensol® TO 15 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...展开
Lutensol® TO 15 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 15 is a soft, slightly yellowish paste. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 2 | BASF |
Lutensol® TO 2 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...展开
Lutensol® TO 2 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 2 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 20 | BASF |
Lutensol® TO 20 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...展开
Lutensol® TO 20 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 20 is a soft, slightly yellowish paste. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 3 | BASF |
Lutensol® TO 3 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...展开
Lutensol® TO 3 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 3 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 389 | BASF |
Lutensol® TO 389 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as...展开
Lutensol® TO 389 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 389 is a clear liquid at 23°C. It is a special mixture of Lutensol® TO 3 and Lutensol® TO 8 with an active content of approx. 90% and approx. 10% water. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 5 | BASF |
Lutensol® TO 5 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...展开
Lutensol® TO 5 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 5 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 6 | BASF |
Lutensol® TO 6 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...展开
Lutensol® TO 6 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 6 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 65 | BASF |
Lutensol® TO 65 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...展开
Lutensol® TO 65 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 65 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 7 | BASF |
Lutensol® TO 7 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...展开
Lutensol® TO 7 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 7 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 79 | BASF |
Lutensol® TO 79 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...展开
Lutensol® TO 79 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 79 is a clear liquid at 23°C. It consists of approx. 90% Lutensol® TO 7 and approx. 10% water. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 8 | BASF |
Lutensol® TO 8 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as p...展开
Lutensol® TO 8 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 8 is a cloudy liquid at 23°C, and it tends to form a sediment. It is clear at 50°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® TO 89 | BASF |
Lutensol® TO 89 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as ...展开
Lutensol® TO 89 is a nonionic surfactant. It is based on a saturated iso-C13-alcohol. This product is manufactured by causing the iso-C13 oxo alcohol to react with ethylene oxide in stoichiometric proportions. The ethoxylation tempature is kept as low as possible. This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained. The numeric code in the product name indicates the degree of ethoxylation. Lutensol® TO 89 is a clear liquid at 23°C. It consists of approx. 90% Lutensol® TO 8 and approx. 10% water. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 100 | BASF |
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 100 is...展开
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 100 is a soft, colourless or slightly yellowish paste at 23°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 140 | BASF |
Lutensol® XL 140 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 140 is...展开
Lutensol® XL 140 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 140 is a soft, colourless or slightly yellowish paste at 23°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 40 | BASF |
Lutensol® XL 40 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 40 is a...展开
Lutensol® XL 40 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 40 is a clear to cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 50 | BASF |
Lutensol® XL 50 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 50 is a...展开
Lutensol® XL 50 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 50 is a clear to cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 60 | BASF |
Lutensol® XL 60 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 60 is a...展开
Lutensol® XL 60 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 60 is a clear to cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 70 | BASF |
Lutensol® XL 70 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 70 is a...展开
Lutensol® XL 70 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 70 is a clear to cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 79 | BASF |
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 79 is ...展开
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 79 is a clear liquid at room temperature. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 80 | BASF |
Lutensol® XL 80 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 80 is a...展开
Lutensol® XL 80 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 80 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 89 | BASF |
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 89 is ...展开
Lutensol® XL 100 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 89 is a clear liquid at room temperature. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XL 90 | BASF |
Lutensol® XL 90 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 90 is a...展开
Lutensol® XL 90 is a nonionic surfactant. Lutensol® XL products are alkyl poly-propylene and ethylene glycol ethers made from a C10-Guerbet Alcohol and ethylene oxide. This product contains also higher alkylene oxide in small amounts. Lutensol® XL 90 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 100 | BASF |
Lutensol® XP 100 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The nu...展开
Lutensol® XP 100 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 100 is a soft, colourless or slightly yellowish paste at 23°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 140 | BASF |
Lutensol® XP 140 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The nu...展开
Lutensol® XP 140 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 140 is a soft, colourless or slightly yellowish paste at 23°C. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 30 | BASF |
Lutensol® XP 30 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展开
Lutensol® XP 30 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 30 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 40 | BASF |
Lutensol® XP 40 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展开
Lutensol® XP 40 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 40 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 50 | BASF |
Lutensol® XP 50 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展开
Lutensol® XP 50 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 50 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 60 | BASF |
Lutensol® XP 60 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展开
Lutensol® XP 60 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 60 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 69 | BASF |
Lutensol® XP 69 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展开
Lutensol® XP 69 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 69 is a clear liquid at room temperature. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 70 | BASF |
Lutensol® XP 70 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展开
Lutensol® XP 70 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 70 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 79 | BASF |
Lutensol® XP 79 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展开
Lutensol® XP 79 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 79 is a clear liquid at room temperature. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 80 | BASF |
Lutensol® XP 80 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展开
Lutensol® XP 80 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 80 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 89 | BASF |
Lutensol® XP 89 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展开
Lutensol® XP 89 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 89 is a clear liquid at room temperature. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 90 | BASF |
Lutensol® XP 90 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展开
Lutensol® XP 90 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 90 is a cloudy liquid at room temperature, and it tends to form a sediment. 收起
Compliance Highlights Unavailable
|
||
| Lutensol® XP 99 | BASF |
Lutensol® XP 99 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The num...展开
Lutensol® XP 99 is a nonionic surfactant. It is an alkyl polyethylene glycol ether based on C10-Guerbet alcohol and ethylene oxide. This product is manufactured by causing the C10-alkohol to react with ethylene oxide in stoichiometric proportions. The numeric code in the product name indicates in general the degree of the ethoxilation. Lutensol® XP 99 is a clear liquid at room temperature. 收起
Compliance Highlights Unavailable
|
||
| Lutropur® MSA | BASF |
Lutropur® MSA is high purity methanesulfonic acid 70% (in water). It provides fast and powerful cleaning, even against greasy soils. It also removes lime scale, calcium deposits, and soap rests, as well as improves rust and grime removal. This product is ...展开
Lutropur® MSA is high purity methanesulfonic acid 70% (in water). It provides fast and powerful cleaning, even against greasy soils. It also removes lime scale, calcium deposits, and soap rests, as well as improves rust and grime removal. This product is suitable for bathroom cleaners toilet bowl cleaners, shower cleaners, and rust removers. 收起
Compliance Highlights Unavailable
|
||
| Plurafac® LF 120 | BASF |
Plurafac® LF-120 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 60 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 1300 | BASF |
Plurafac® LF-1300 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 130 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 131 | BASF |
Plurafac® LF-131 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 40 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 132 | BASF |
Plurafac® LF-132 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 5 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 1430 | BASF |
Plurafac® LF-1430 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 450 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 220 | BASF |
Plurafac® LF-220 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 150 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 221 | BASF |
Plurafac® LF-221 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 100 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 223 | BASF |
Plurafac® LF-223 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 70 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 224 | BASF |
Plurafac® LF-224 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 55 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 231 | BASF |
Plurafac® LF-231 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 45 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 300 | BASF |
Plurafac® LF-300 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 75 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 301 | BASF |
Plurafac® LF-301 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 150 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 303 | BASF |
Plurafac® LF-303 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 350 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 305 | BASF |
Plurafac® LF-305 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 110 mPa·s at 23°C.
Compliance Highlights Unavailable
|
||
| Plurafac® LF 400 | BASF |
Plurafac® LF-400 is a low foaming nonionic surfactant. It consists of alkoxylated, predominantly unbranched fatty alcohols, and contains higher alkene oxides alongside ethylene oxide. This product has a viscosity of approximately 70 mPa·s at 23°C.
Compliance Highlights Unavailable
|
